Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    PLD-25/CBS: Cbs Emergency Led Illumination Sign

    Uploaded by

    ThanosEleftheroudis
    This document provides specifications and installation instructions for the PLD-25/CBS emergency LED illumination sign. Key details include: - It operates from 45-250V DC or 80-250V AC power sources, consumes up to 1.8VA, and provides 100 lumens of light. - Dimensions are 280x49x209mm and it weighs 715g. It has an IP44 protection rating and operates from -30 to 50°C. - Installation methods include surface mounting on walls or ceilings, hanging from ceilings, or flag mounting on walls. Electrical connections use an N wire for neutral and L for live. - The LED module operates from

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PLD-25/CBS: Cbs Emergency Led Illumination Sign

    Uploaded by

    ThanosEleftheroudis
    45 views2 pages
    This document provides specifications and installation instructions for the PLD-25/CBS emergency LED illumination sign. Key details include: - It operates from 45-250V DC or 80-250V AC power sources, consumes up to 1.8VA, and provides 100 lumens of light. - Dimensions are 280x49x209mm and it weighs 715g. It has an IP44 protection rating and operates from -30 to 50°C. - Installation methods include surface mounting on walls or ceilings, hanging from ceilings, or flag mounting on walls. Electrical connections use an N wire for neutral and L for live. - The LED module operates from

    Original Description:

    Olympia Electronics emergency exit light technical manual

    Original Title

    PLD-25_CBS_EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications and installation instructions for the PLD-25/CBS emergency LED illumination sign. Key details include: - It operates from 45-250V DC or 80-250V AC power sources, consumes up to 1.8VA, and provides 100 lumens of light. - Dimensions are 280x49x209mm and it weighs 715g. It has an IP44 protection rating and operates from -30 to 50°C. - Installation methods include surface mounting on walls or ceilings, hanging from ceilings, or flag mounting on walls. Electrical connections use an N wire for neutral and L for live. - The LED module operates from

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views2 pages

    PLD-25/CBS: Cbs Emergency Led Illumination Sign

    Uploaded by

    ThanosEleftheroudis
    This document provides specifications and installation instructions for the PLD-25/CBS emergency LED illumination sign. Key details include: - It operates from 45-250V DC or 80-250V AC power sources, consumes up to 1.8VA, and provides 100 lumens of light. - Dimensions are 280x49x209mm and it weighs 715g. It has an IP44 protection rating and operates from -30 to 50°C. - Installation methods include surface mounting on walls or ceilings, hanging from ceilings, or flag mounting on walls. Electrical connections use an N wire for neutral and L for live. - The LED module operates from

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    PLD-25/CBS CBS EMERGENCY LED ILLUMINATION SIGN

    TECHNICAL CHARACTERISTICS (for LED MODULE specifications see page 3)


    Mains voltage 45-250V DC / 80-250V AC/50-60Hz
    Maximum power consumption 1.6W / 1.8VA
    Light source intensity 100lm
    Viewing distance 26m
    Degrees of cover protection IP44
    Produced in accordance with EN 60598-1, EN 60598-2-22, ΕΝ 55015, ΕΝ 61547, ΕΝ 61000-3-2, ΕΝ 61000-3-3, EN 1838
    Operation temperature range -30 to 50 o C
    Relative humidity up to 95%
    Construction materials Fire retardant ABS, plexiglas
    External dimensions (LxWxH) 280x49x209mm
    Typical weight 715gr.
    Guarantee 3 years

    Thank you for your trust in our products. Olympia Electronics - European manufacturer
    GENERAL testing must be done by authorized personnel only.
    This luminaire is used indoors (ta 50oC) in places 2. The luminaire must be connected to the mains
    where emergency luminaires (CBS) are needed. power supply through a fuse dependent on the total
    Each luminaire must be permanently connected to amount of the line’s power load.
    mains power supply. INSTALLATION
    ΑΤΤΕΝΤΙΟΝ!!! To install the luminaire follow the installation
    1. Operations for installation, maintainance or instructions bellow and on pages 2,3.

    INSTALLATION INSTRUCTIONS
    ELECTRICAL CONNECTIONS
    1 Dismantle the luminaire by pushing the lock/unlock hooks 1
    on each side and pull it down.
    2 Installation advice:
    Use a flat screwdriver at the indication point in order to
    open the luminaire.
    3 Pass through the cables from the entry hole and
    connect them as shown in the picture. N for neutral L for
    live wire and PE for ground (optional).
    4 Place upwards the luminaire until the plastic hooks are 2
    securely locked and power on the device.
    SURFACE MOUNTING ON A WALL (single sided)
    Dismantle the luminaire, install the plastic bracket on the
    wall (page 2) and perform the respective steps of the
    electrical connections. 3
    CEILING INSTALLATION L
    N
    Dismantle the luminaire, install the plastic bracket on the PE

    ceiling (page 2) and perform the respective steps of the


    electrical connections. 4
    HANGING INSTALLATION (Optional)
    Install the mounting base (tube) on the ceiling (page 2)
    and perform the respective steps of the electrical
    connections.
    FLAG MOUNTING INSTALLATION (Optional)
    Install the flag mounting base on the wall (page 3) and
    perform the respective steps of the electrical connections.

    Page 1 from 3 922502504_09_003


    SUGGESTED MOUNTING METHODS SUSPENDED CEILING INSTALLATION
    Suspended ceiling
    SURFACE MOUNTING ON A WALL (single side luminaire)

    A-2510/PL NOTE!! The installation instructions


    (OPTIONAL AFTER REQUEST) are included in the package of the
    suspended ceiling base.

    FLAG MOUNTED ON A WALL


    A-2133 SET
    (OPTIONAL AFTER REQUEST)

    If necessary place the included


    spacers to mount the base.

    CEILING MOUNTED

    LED MODULE CHARACTERISTICS


    PLD-25/CBS
    Manufacturer Olympia Electronics S.A.
    Model Number 0409153
    Voltage Range 11.6-14.4V DC
    Nominal Power 780mW
    Connections Non reversible connection between main pcb and led module
    Temperature (tc) 40 °C max. across the board

    NOTE: LED= Light Emitting Diode The light source contained in this luminaire
    If necessary place the included LABELING EXPLANATION: shall only be replaced by the manufacturer, or
    spacers to mount the base. Z: Central supply his agent, or a similar qualified person.
    1: Maintained (*)
    HANGING INSTALLATION G: Internally illuminated safety sign NOTE! The light source is non-user replaceable.

    WARRANTY
    Olympia Electronics guarantees the quality, condition and operation of the goods. The period of
    A-2130, A-2131, A-2132 SET warranty is specified in the official catalogue of Olympia Electronics and also in the technical leaflet,
    (OPTIONAL AFTER REQUEST) which accompanies each product. This warranty ceases to exist if the buyer does not follow the
    Α technical instructions included in official documents given by Olympia Electronics or if the buyer
    modifies the goods provided or has any repairs or re-setting done by a third party, unless Olympia
    Tube Electronics has fully agreed to them in writing. Products that have been damaged can be returned to
    Α-2130 Α=1m the premises of our company for repair or replacement, as long as the warranty period is valid.
    GENERAL!! Α-2131 Α=0.5m Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge
    Measure the distance of the the buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or
    mounting holes and after the drilling Α-2132 Α=0.25m not the buyer the transportation cost.
    place on these spots the mounting HEAD OFFICE
    plugs and fasten the base with the 72nd km. O.N.R. Thessaloniki-Katerini
    mounting screws. P.C. 60300 P.O. Box 06 Εginio Pierias Greece
    www.olympia-electronics.gr
    info@olympia-electronics.gr

    Page 2 from 3 922502504_09_003 Page 3 from 3 922502504_09_003

    You might also like