Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 32 views

    Adm485 Specifications: V 5 V 5%, All Specifications T Tot, Unless Otherwise Noted

    Uploaded by

    mhasansharifi
    This document provides specifications for the ADM485 chip, including: 1. Minimum, typical, and maximum parameters for the driver and receiver functions such as differential output voltage, input thresholds, and input/output currents. 2. Power supply current is listed as 1.0-2.2mA with outputs enabled and 0.6-1mA with outputs disabled. 3. The chip operates from a single 5V supply with a tolerance of ±5% and specifications are guaranteed over the operating temperature range.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Adm485 Specifications: V 5 V 5%, All Specifications T Tot, Unless Otherwise Noted

    Uploaded by

    mhasansharifi
    32 views1 page
    This document provides specifications for the ADM485 chip, including: 1. Minimum, typical, and maximum parameters for the driver and receiver functions such as differential output voltage, input thresholds, and input/output currents. 2. Power supply current is listed as 1.0-2.2mA with outputs enabled and 0.6-1mA with outputs disabled. 3. The chip operates from a single 5V supply with a tolerance of ±5% and specifications are guaranteed over the operating temperature range.

    Original Title

    ADM485 3

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the ADM485 chip, including: 1. Minimum, typical, and maximum parameters for the driver and receiver functions such as differential output voltage, input thresholds, and input/output currents. 2. Power supply current is listed as 1.0-2.2mA with outputs enabled and 0.6-1mA with outputs disabled. 3. The chip operates from a single 5V supply with a tolerance of ±5% and specifications are guaranteed over the operating temperature range.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    32 views1 page

    Adm485 Specifications: V 5 V 5%, All Specifications T Tot, Unless Otherwise Noted

    Uploaded by

    mhasansharifi
    This document provides specifications for the ADM485 chip, including: 1. Minimum, typical, and maximum parameters for the driver and receiver functions such as differential output voltage, input thresholds, and input/output currents. 2. Power supply current is listed as 1.0-2.2mA with outputs enabled and 0.6-1mA with outputs disabled. 3. The chip operates from a single 5V supply with a tolerance of ±5% and specifications are guaranteed over the operating temperature range.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ADM485

    SPECIFICATIONS
    VCC = 5 V ± 5%, all specifications TMIN to TMAX, unless otherwise noted.

    Table 1.
    Parameter Min Typ Max Unit Test Conditions/Comments
    DRIVER
    Differential Output Voltage, VOD 5.0 V R = ∞, see Figure 20
    2.0 5.0 V VCC = 5 V, R = 50 Ω (RS-422), see Figure 20
    1.5 5.0 V R = 27 Ω (RS-485), see Figure 20
    VOD3 1.5 5.0 V VTST = −7 V to +12 V, see Figure 21
    Δ|VOD| for Complementary Output States 0.2 V R = 27 Ω or 50 Ω, see Figure 20
    Common-Mode Output Voltage, VOC 3 V R = 27 Ω or 50 Ω, see Figure 20
    Δ|VOD| for Complementary Output States 0.2 V R = 27 Ω or 50 Ω
    Output Short-Circuit Current, VOUT = High 35 250 mA −7 V ≤ VO ≤ +12 V
    Output Short-Circuit Current, VOUT = Low 35 250 mA −7 V ≤ VO ≤ +12 V
    CMOS Input Logic Threshold Low, VINL 0.8 V
    CMOS Input Logic Threshold High, VINH 2.0 V
    Logic Input Current (DE, DI) ±1.0 μA
    RECEIVER
    Differential Input Threshold Voltage, VTH −0.2 +0.2 V −7 V ≤ VCM ≤ +12 V
    Input Voltage Hysteresis, ΔVTH 70 mV VCM = 0 V
    Input Resistance 12 kΩ −7 V ≤ VCM ≤ +12 V
    Input Current (A, B) 1 mA VIN = 12 V
    –0.8 mA VIN = −7 V
    CMOS Input Logic Threshold Low, VINL 0.8 V
    CMOS Input Logic Threshold High, VINH 2.0 V
    Logic Enable Input Current (RE) ±1 μA
    CMOS Output Voltage Low, VOL 0.4 V IOUT = 4.0 mA
    CMOS Output Voltage High, VOH 4.0 V IOUT = −4.0 mA
    Short-Circuit Output Current 7 85 mA VOUT = GND or VCC
    Three-State Output Leakage Current ±1.0 μA 0.4 V ≤ VOUT ≤ 2.4 V
    POWER SUPPLY CURRENT
    ICC, Outputs Enabled 1.0 2.2 mA Digital inputs = GND or VCC
    ICC, Outputs Disabled 0.6 1 mA Digital inputs = GND or VCC

    Rev. F | Page 3 of 16

    You might also like