Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 417 views

    Rig Floor Safety

    Uploaded by

    khurram
    1. The document provides safety training guidelines for personnel working on an oil rig floor. It outlines proper procedures for accessing the floor, staying clear of rotating equipment, and working safely. 2. Specific safety precautions are given for different tasks like climbing stairs, avoiding pinch points, using hydraulic tongs carefully, holding and moving pipes slowly, and being aware of drawworks. 3. Personnel are instructed to wear all necessary PPE, keep equipment clean, avoid distractions, use eye protection, and follow tool pusher and driller instructions to prevent accidents and protect health, safety, and the environment. The rig manager and HSE supervisor signatures confirm the training.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Rig Floor Safety

    Uploaded by

    khurram
    417 views1 page
    1. The document provides safety training guidelines for personnel working on an oil rig floor. It outlines proper procedures for accessing the floor, staying clear of rotating equipment, and working safely. 2. Specific safety precautions are given for different tasks like climbing stairs, avoiding pinch points, using hydraulic tongs carefully, holding and moving pipes slowly, and being aware of drawworks. 3. Personnel are instructed to wear all necessary PPE, keep equipment clean, avoid distractions, use eye protection, and follow tool pusher and driller instructions to prevent accidents and protect health, safety, and the environment. The rig manager and HSE supervisor signatures confirm the training.

    Original Title

    2. Rig Floor Safety

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides safety training guidelines for personnel working on an oil rig floor. It outlines proper procedures for accessing the floor, staying clear of rotating equipment, and working safely. 2. Specific safety precautions are given for different tasks like climbing stairs, avoiding pinch points, using hydraulic tongs carefully, holding and moving pipes slowly, and being aware of drawworks. 3. Personnel are instructed to wear all necessary PPE, keep equipment clean, avoid distractions, use eye protection, and follow tool pusher and driller instructions to prevent accidents and protect health, safety, and the environment. The rig manager and HSE supervisor signatures confirm the training.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    417 views1 page

    Rig Floor Safety

    Uploaded by

    khurram
    1. The document provides safety training guidelines for personnel working on an oil rig floor. It outlines proper procedures for accessing the floor, staying clear of rotating equipment, and working safely. 2. Specific safety precautions are given for different tasks like climbing stairs, avoiding pinch points, using hydraulic tongs carefully, holding and moving pipes slowly, and being aware of drawworks. 3. Personnel are instructed to wear all necessary PPE, keep equipment clean, avoid distractions, use eye protection, and follow tool pusher and driller instructions to prevent accidents and protect health, safety, and the environment. The rig manager and HSE supervisor signatures confirm the training.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    DPAB (Al-Halfaya oil field, Amarah) HSE-MS record No.

    TRAINING RECORD 培训记录


    Training No.编号:
    Rig No.队号: DQ021 Date 日期: 2015-08-05/06
    Trainee No 培训人数:   Trainer 培训人: HSE
    Place 地点: Rig Site + Camp site Period 学时 15 minutes 
    Rig Floor Safety
    1. Moving up the floor
     Only authorized personnel can go up the floor
     Take permission from HSE office if you are not authorized but have to go to floor
     Use all PPE (Hard Hat, Safety Shoes, Glass) and use hand rails while climbing up the stairs
     Reaching the floor, connect the safety chains on ladders behind you
    2. Stay on the floor.
     Stay away from the rotating equipment and all pipes colored as red
     Don’t touch, disturb or finger anything, don’t go near to the drilling pipe
     Don’t stay too close to the V Door
     Don’t stay close to the hydraulic unit and drawworks
     Never try to look deep at the drum of the drawworks when it is operating
     Only authorized personnel can enter the driller’s consol
    3. Working on the Floor
    Working on the floor is a very dangerous and hazardous activity. If no proper care is taken then the
    work which seems simple may turn out to be disastrous. The following cares are suggested to
    prevent and harm to person, machines or the environment:-
     The floor, pipes and all equipment should be kept as clean as possible
     The floor men must wear all the needed PPE all the time when working on the floor
     Mobile phones should never be used while working on the floor
     Eye glasses must be used when cleaning the pipes being pulled out
     No staff should stand near to stand pipe manifold for long period of time
     All the tools used should be kept clean and at proper places better in the tool room
     The hydraulic tongs must be used properly to avoid pinch points and hit by the tong when
    reversing
     All the floor men must follow the instructions by tool pusher and driller
     Slips should be used in such a way as to put the least load on back bone to avoid ergonomic
    problems
     The floor men moving the pipes must hold it and move his feet slow to avoid slip and fall
     All the personnel on the floor must take care about the moving pipes
     The personnel working or present on the floor should be careful about the working draw
    works
     While greasing the threads of the pipes, try to avoid splashing of grease on the floor
     The personnel standing close to the V Door must be careful about falling through V Door
    Note:

    No un-necessary personnel should be present on the floor. The floor men must watch out
    for the personnel around them to prevent any occurrence.

    Rig Manager signature: _______________________ HSE Supervisor Signature: ___________________

    You might also like