Exam HP0-J15

s@lm@n
HP
Exam HP0-J15
HP StorageWorks MASE 2088 Delta Exam
Version: 5.0
[ Total Questions: 106 ]

HP HP0-J15 : Practice Test
Topic 0, A
A
Question No : 1 - (Topic 0)
On an MSA2000, what is the pre-allocated reserve space for snapshot data?
A. target volume
B. reserve pool
C. snap pool
D. master volume
Answer: C
What is the purpose of the Trust Virtual Disk?
A. storage of meta-data for all disks in an array

B. provide secure storage for data encryption keys
C. disaster recovery for RAID set after power restoration
D. quorum disk for more than 2-node Windows Cluster
Answer: C
Which capabilities does the MSA2012fc provide?
A. dual-ported SATA drives; support for up to 64 hosts

B. support for up to 64 drives; ability to mix SAS and SATA drives in same drive enclosure
C. snapshot/clone capability; ability to mix SAS and SATA drives in same drive enclosure
D. controller-based replication capability; support for up to 64 drives
Answer: C
A virtual disk has been quarantined. You attempt to dequarantine the virtual disk, but there
"A Composite Solution With Just One Click" - Certification Guaranteed 2

are not enough drives available to maintain the selected RAID level. What happens?
A. The virtual disk size is reduced to accommodate the RAID level.

B. The virtual disk goes offline and its data cannot be recovered.
C. The virtual disk stays in quarantine until disks are added.
D. The virtual disk goes critical and the sparing routine is called.
Answer: B
MPIO drivers are an important part of connecting Windows servers to storage. In which
part of Windows are these drivers run?
A. user mode
B. realtime mode
C. real mode
D. kernel mode
Answer: D
You are installing an MSA2012i array. The customer asks about the data protection
features of the new array. How many volume copies can be created in this array?
A. 48
B. 64
C. 128
D. 256
Answer: C
You need to directly attach an MSA2000fc array to a host. Which SAN topology is
supported?
A. point-to-point
B. cascade

C. local mesh
D. loop
Answer: D
The MSA2012 controller can be accessed by two types of users: monitor and manage.
What is the maximum number of monitor users that can be logged into an MSA2012
controller at any one time?
A. 2
B. 3
C. 4
D. 5
Answer: D
Question No : 9 DRAG DROP - (Topic 0)
Click the Task button. Click on the snap pool space in the color code area of the volume
status information.
Answer:

An MSA2012fc storage solution has just been installed You try to manually add a global
spare disk. The operation fails and you receive an error message. What is the most
probable reason for the failure?
A. No virtual disk exists on the system.

B. Unassigned disks are automatically used as global spares.
C. Global spare disks must reside in the same enclosure as the Vdisks.
D. Four global spares have already been assigned.
Answer: A
You add an additional enclosure to an MSA2012fc storage system. How many global
spares can now be designated for the entire array?
A. 1
B. 2
C. 4
D. 8
Answer: D

On an MSA2000 array, which component allows the application of read and write cache
policies?
A. volume
B. virtual disk
C. physical disk
D. array
Answer: A
You are verifying whether an MSA2012fc environment is supported by HP and need to

know if the SAN switch and HBA firmware versions are compatible. Where can this
information be obtained?
A. MSA2012fc Streams
B. MSA2012fc User Guide
C. MSA2012fc Quick Specs
D. MSA2012fc website
Answer: A
An OpenVMS system needs an additional 4.8TB of storage. You have only 2U of rack
space available. Which HP StorageWorks product should you use?
A. HP StorageWorks MSA60
B. HP StorageWorks MSA70
C. HP StorageWorks MSA2012i
D. HP StorageWorks MSA2000fc
Answer: A

You have disks with different sizes in an MSA2000 array. You are using the Automatic
Virtual Disk Creation option to configure a Vdisk. Which size factor impacts the calculation
of the Vdisk size?
A. the smallest disk size in the array

B. the largest disk size in the array
C. the average size of the disks in the first enclosure
D. the most common disk size of disks in the array
Answer: A
Click the Task button. Click on the standard volume space in the color code area of the
volume status information.
Answer:

Your customer needs a storage solution with at least 19TB of disk space. As they are
running Oracle on some of their servers, they need a minimum of 60 spindles. Which HP
storage solution meets these requirements?
A. MSA2000fc
B. MSA2000i
C. 1200 All-in-One Storage System
D. EVA4400
Answer: D
On an MSA2000 array, what is another name for the source volume of a snapshot?
A. fast recovery volume

B. master volume
C. standard volume
D. primary volume
Answer: B
What is controlled by Data Rollup?
A. when data is deleted

B. which new data overwrites old data
C. how old the data is
D. how often a set of data is summarized
Answer: B

Click the Task button. Match each HP Storage Essentials SRM Standard Edition base
component with its description.
Answer:

You attempt to access the HP Storage Essentials Web Interface and receive an HTTP
ERROR: 503. What is the most likely cause?
A. The appstormanager service is not running.

B. HP Storage Essentials connector is not running.
C. Assigned credentials for the appstormanager service are invalid.
D. Connection to the Oracle database failed.
Answer: C
HP Data Protector Software and Veritas NetBackup are installed on the same host. What is

the result of a CIM discovery?
A. Only HP Data Protector will be discovered by default.

B. Both applications will be discovered and can work in parallel.
C. Only Veritas NetBackup will be discovered by default.
D. No backup applications will be discovered.
Answer: B
What can the WBEMdisco utility be used to verify?
A. SIM-S connections
B. SMI-S credentials
C. Workspace discovery username
D. CMI Agent configuration
Answer: B
The base component of HP Storage Essentials SRM is licensed by MAPs. How many
MAPs are required for a customer environment that includes 1 x EVA8100 (8 ports total), 2
x 16-port Brocade switches, 10 Linux and 10 Windows servers, both with 2 Fibre Channel
connections?
A. 60
B. 80
C. 96
D. 112
Answer: B
Which environments are typically used with HP Storage Essentials SRM Standard Edition?
A. Sybase and AIX

B. Sybase and Microsoft Windows

C. Oracle and Tru64 UNIX
D. SQL Server 2003 and Microsoft Windows
Answer: B
Which component of HP Storage Essentials SRM forwards HP Systems Insight Manager

discovery information?
A. SMI-S provider
B. data bridge
C. connector
D. transfer agent
Answer: C
HP Storage Essentials SRM Standard Edition can be integrated with HP Systems Insight
Manager. What is a benefit of this integration?
A. flexible reporting
B. common report designer
C. single sign-on
D. scalability and provisioning
Answer: C
You are running HP Storage Essentials SRM on a Linux server. What must you do before
manually starting the CIM Extension?
A. Stop all other CIM daemons.

B. Log in with root privileges.
C. Stop any discovery processes.
D. Perform Discovery at least one time.

Answer: B
A collector task is used to collect data in HP Storage Essentials SRM Standard Edition.
What must you edit to change the SMI-S provider timeout value?
A. the runcim.bat file

B. Custom Properties through the Manage Product Health GUI
C. the wrapper.conf file
D. timeout properties in the cxws.config file
Answer: B
What are steps of the HP Storage Essentials SRM discovery process? (Select two.)
A. Setup
B. Hardware Scan
C. Detail Scan
D. License Scan
E. Unlock
Answer: D,E
HP Storage Essentials SRM Standard Edition was recently installed and the first discovery
was successfully completed. The topology view contains many hosts with question marks
and generic names. Why are these hosts shown in this way?
A. A managed switch reports all connected hosts WWNs.

B. Any host that can be pinged creates an icon.
C. These are hosts were discovered in Active Directory.
D. Any discovered array reports all WWNs of connected hosts.
Answer: A

What does HP Storage Essentials SRM Standard Edition provide the customer?
A. storage reporting for Windows and UNIX hosts

B. simplicity of handling provisioning tasks
C. simplified EVA storage management
D. simplified XP storage management
Answer: C
HP Storage Essentials SRM provides a topology view of elements that have been
discovered and displays connections to other elements. What must be installed on a host
so that the host is fully discovered and all host connections are shown?
A. SNIA library and SMI-S provider

B. SMI-S provider and DCOM
C. CIMOM and CXWS agent
D. CXWS agent and SNIA library
E. DCOM and CIMOM
Answer: D
HP Storage Essentials SRM is monitoring the free space on the web server of end users.
Which module allows an end user to receive an email when free space falls below 20GB?
A. Performance Manager
B. Policy Manager
C. Event Manager
D. Capacity Manager
Answer: B

You have recently upgraded to HP Storage Essentials SRM Standard Edition v6.0. Which
communication method is used to discover Brocade switches?
A. SMI-S
B. SNMP
C. Brocade API
D. broadcast query
Answer: A
What is the primary customer target market for HP Storage Essentials SRM Standard
Edition?
A. small EVA SAN with few managed applications

B. small SAN with a few EVA and XP arrays
C. small or medium EVA and MSA customers with UNIX hosts
D. large, complex SAN with many hosts
Answer: A
Small and medium-sized business customers are excellent candidates for the HP Storage
Essentials SRM Standard Edition and its integration with HP Systems Insight Manager.
What is an important benefit of this integration?
A. report customization that is an optional feature

B. flexible licensing that allows customers to add MAPs to existing environment
C. reduced overall administrative costs
D. a substantial discount for the entire software bundle
Answer: C
HP Storage Essentials SRM has been installed in a customer environment. Hosts are
discovered during initial discovery, but these hosts have generic names and no detailed

host information is available. What should you do to have the host name and details
displayed in the Topology view?
A. Wait approximately fifteen minutes to allow the Detail Scan to finish.

B. Install the CIM extensions on all discovered Windows hosts.
C. Install the Oracle database connector on the management server.
D. Install the SIM management agents on all discovered Windows hosts.
Answer: B
The HP Storage Essentials SRM Capacity Manager uses different terms to categorize how
capacity is being used on a storage system. What is the state of storage that is marked as
unmapped?
A. not assigned to a storage port or a host

B. assigned to a host, but not to a storage port
C. assigned to a storage port, but not to a host
D. assigned to a storage port and a host, but unmounted
E. assigned to a storage port and a host, but not formatted
Answer: A
During the element discovery process, which action is attempted by the management
server?
A. detailed security scan for security impacts

B. login using default usernames and passwords
C. event log scan for changed elements
D. default configuration of elements
Answer: B
Which activities can be monitored with HP Storage Essentials SRM Standard Edition?

(Select two.)
A. storage growth planning

B. real time event management
C. storage network traffic sniffing
D. domain user rights identification
E. underutilized storage identification
Answer: B,D
HP Storage Essentials SRM comes in two editions: Standard and Enterprise. Which plug-
ins are part of Standard Edition?
A. Policy Viewer and File System Viewer

B. Provisioning Manager and Global Reporter Viewer
C. Provisioning Manager and File System Viewer
D. Database Viewer and File System Viewer
Answer: D
A SAN with four HP B-series SAN switches is running Secure Fabric OS. If you change the
Admin password on one switch, on which switch(es) will the password change?
A. only LDAP-enabled switches

B. all switches in the SAN
C. only the switch you are logged in to
D. only switches connected to the secure LAN
Answer: B
Performance can become degraded when you use iSCSI to connect hosts to storage. What
should you do to improve response times?
A. Upgrade to CommandView 8.

B. Disable Service Location Protocol (SLP) Service Agent.
C. Use NICs with TCP/IP Offload Engine (TOE).
D. Enable N_Port ID Virtualization (NPIV) support.
Answer: C
What are benefits of logical fabrics?
A. reduces port count and minimizes fault propagation

B. increases performance and enables device sharing across fabrics
C. minimizes fault propagation and enables device sharing across fabrics
D. reduces port count and makes administration easier
Answer: C
Starting with firmware v5.3.x, essential security elements in B-Series SAN switches have
been moved to which location?
A. Secure Fabric OS
B. switch port web interface
C. Fabric Manager kernel
D. base Fabric OS
Answer: D
Which features can be set up by the HP All-in-One Storage Manager?
A. network shares and Fibre Channel storage provisioning

B. iSCSI storage provisioning and network shares
C. SAN zoning and iSCSI storage provisioning
D. Fibre Channel storage provisioning and SAN zoning
Answer: B

Production servers and storage arrays have been centralized in a data center. You need to
offer SAN services to less critical servers located outside the data center over an existing
Ethernet network. Which protocol should you use to connect those servers to the SAN?
A. FC-FC tunneling
B. iFCIP
C. iSCSI
D. FC-ATM
Answer: C
Which HP software utility helps with SAN analysis, SAN diagnostics and SAN optimization?
A. HP SAN Designer
B. HP SAN Visibility Tool
C. HP SAN Surveyor
D. HP CommandView
Answer: B
Which type of HP SAN switch uses Inter-Fabric Routing to allow access between virtual
fabrics?
A. Q-Series
B. M-Series
C. B-Series
D. C-Series
Answer: C
The HP StorageWorks 400 Multi-Protocol Router (MPR) is used for FCIP tunneling. Which
other SAN service is provided by the MPR?
A. ISL zoning
B. IP-IP subnet routing
C. iSCSI-FC routing
D. FC-FC subnet routing
Answer: D
When merging two SAN fabrics, what causes an error that indicates the definition of a zone
object in one fabric is different from its definition in the other fabric?
A. duplicate IDs
B. zone type mismatch
C. zone content mismatch
D. zone content error
Answer: C
Which SAN switch management tool is now available as both an embedded version and
CD version?
A. Emulex EZpilot
B. Cisco Fabric Manager
C. Brocade Fabric Watch
D. QLogic SSCM
Answer: B
Which tool helps you design a SAN with HP Blade servers based on performance rather
than cost?
A. HP SANsurfer

B. HP Simple Storage Blade Designer
C. HP SAN Visibility
D. HP SAN Designer
Answer: D
In addition to RADIUS, which user password authentication service can be used on

Brocade switches?
A. NIS
B. LDAP
C. local switch database
D. Kerberos
Answer: C
Which HP SAN product should you recommend for a customer who wants to replicate data
between two EVA8100 arrays at sites 200 km apart?
A. MPX 110
B. MPX 100
C. MPR 110
D. MPR 100b
Answer: A
Which single Director switch model can be used to connect to at least 400 switch ports?
A. B-Series 9400 Director

B. B-Series 9509 Director
C. Cisco MDS 9512 Director
D. Cisco MDS 9513 Director

Answer: D
The HP c-Class BladeSystem has been adopted as a corporate standard for servers. You
must integrate several of these blade enclosures into a large SAN fabric. Which
interconnects should you recommend to minimize the number of switches visible in the
fabric? (Select two.)
A. HP 4Gb Virtual Connect Fibre Channel module

B. QLogic 8/20q Fabric Switch
C. Cisco MDS 9124e Fabric Switch
D. Brocade 4Gb SAN Switch in Access Gateway mode
E. Emulex 8Gb Advanced SAN Switch
Answer: A,D
A company has installed a SAN using HP B-Series switches. They need to distribute
administrator responsibilities across staff members. What should be done to accomplish
this?
A. Upgrade to Secure Fabric OS.

B. Group fabric elements through Administrative Domains.
C. Implement Distributed Administration through Fabric Manager.
D. Purchase the Advanced Administration license.
Answer: B
How many drives can be held by the EVA4400 drive shelf?
A. 16
B. 14
C. 12
D. 8

Answer: C
Click the Task button. A customer has a failed disk and the disk needs to be replaced. Click
on the location where you can check to display the ungrouped disk folder.
Answer:

Which components must be replaced by HP authorized service personnel on the HP

StorageWorks EVA x100 Series? (Select two.)
A. blower
B. hard disk drives
C. EMU
D. I/O module
E. power supply
Answer: C,D

What is the EVAperf default setting for collecting data?
A. every second
B. every 5 seconds
C. every 10 seconds
D. every 15 seconds
Answer: C
Which EVA component supports hot-plug replacement?
A. controller
B. drive enclosure
C. PDU
D. I/O module
Answer: D
Click the Task button. Match the individual responsible for servicing each EVA4400
component.

Answer:
How many host ports are on a single EVA4400 controller?
A. 1
B. 2
C. 4
D. 8
Answer: B
Which improvement is offered by the drive enclosure used in the EVAx100?
A. embedded loop switch support

B. SCSI 320 drive support
C. 1 inch and 3.5 inch form factor drive support
D. embedded port bypass controller
Answer: D

What is the minimum EVA model that has a base configuration of 2C1D?
A. EVA4100
B. EVA8100
C. EVA6100
D. EVA4400
Answer: A
Which Fibre Channel cable type is required when using 4Gb/s SFPs to connect devices up
to a maximum distance of 150m?
A. 9 micron multi mode

B. 50 micron multi mode
C. 62.5 micron single mode
D. 55 micron single mode
Answer: B
You are configuring an EVA for availability. To which diskgroup should you assign the
snapclone to help meet this requirement?
A. to the same disk group using Vraid1

B. to the same disk group using Vraid5
C. to a different disk group using Vraid5
D. to a different disk group using Vraid1
Answer: D

Which model is the correct controller model for an EVA4400?
A. HSV200B
B. HSV210
C. HSV300
D. HSV310B
Answer: C
What is the minimum number of characters supported in the CommandView EVA

password, in version 7 and above?
A. 8
B. 6
C. 10
D. 12
Answer: A
When expanding an EVA4400 to 8 disk shelves, how many back end loop switches are
required?
A. 4
B. 2
C. 1
D. 0
Answer: D
What is the maximum size LUN that can be created on the EVA4400 at initial release?
A. 32TB
B. 16TB
C. 2TB

D. 1TB
Answer: C
Your customer has an EVA6100 and has been reading about new features, in particular
the LUN shrink facility. Which firmware and software versions are required to support this
feature? (Select two.)
A. XCS 6.100
B. XCS 6.110
C. XCS 8.020
D. CommandView v6.0
E. CommandView v7.0
F. CommandView v7.01
Answer: B,E
What is used to connect the mirror ports between the two controllers in the EVA4400?
A. backend device loops

B. midplane connection
C. external 4GB Fibre Channel cable
D. internal copper cable
Answer: B
Which HP StorageWorks EVA x100 failed components must be replaced by the customer,
based on new warranty procedures introduced in February 2007?
A. blower, power supply, and hard disk drives

B. power supply, drive enclosure, and hard disk drives
C. EMU, I/O module, and drive enclosure
D. hard disk drives, drive enclosure, and I/O module

Answer: A
When performing an online code load, what can be part of a disk group that completes
successfully?
A. unprotected RSS
B. reconstructing disk group
C. Vraid0 LUN
D. Vraid5 LUN
Answer: D
How many internal ports per controller are on the EVA4400 with the embedded Fibre
Channel port switch?
A. 0
B. 1
C. 2
D. 4
Answer: C
Which zoning type must be used in a heterogeneous fabric with M-Series and B-Series
switches?
A. name server zoning

B. fabric address zoning
C. domain-port-area zoning
D. VSAN zoning
Answer: A

For additional data security over a Fibre Channel ISL, which third-party data-in-flight
encryption device is supported by HP?
A. NeoScale CryptoStor VPN

B. SAFENET HighAssurance Gateways
C. Decru DataFort E-Series
D. General Dynamics TACLANE KG-175
Answer: A
The business value of data can change over time. Which concept is helpful to revalue such
data?
A. long-term data replication

B. policy-based data movement
C. one-button data restoration
D. data revision tracking
Answer: B
What is the unique feature of VSANs in C-Series Fibre Channel switches?
A. Oversubscription on connected ISLs can be minimized through path load balancing.

B. Different vendor switches can be interconnected without using interoperability.
C. Different fabric settings can be applied in a switch.
D. More than one management IP address can be configured per switch.
Answer: C
Which iSCSI feature does HP support?

A. backup to physical tape library through iSCSI
B. iSCSI initiator replication to a target device
C. initiators that boot from an iSCSI target
D. iSCSI zoning from the target device
Answer: C
Click the Exhibit button. You have been tasked with installing HP Continuous Access,
which involves extending the SAN fabric between sites using Wavelength Division
Multiplexing (WDM) devices. How many hops does a data packet perform when using this
interconnect?
A. 1
B. 2
C. 3
D. 4
Answer: A
Which HP ILM product provides content-searchable and retention-managed data after it

has been moved from a Windows environment to HP's Integrated Archive Platform?
A. File Migration Agent (FMA)

B. Continuous Data Protection (CDP)
C. File System Extender (FSE)
D. StorageWorks Storage Mirroring
Answer: A

Which HP product should you recommend to a customer who needs to do guided path
provisioning of an EMC frame?
A. HP OpenView Storage Provisioner

B. HP CommandView 7
C. HP StorageWorks 200 Virtualization System
D. HP Storage Essentials SRM Enterprise Edition
Answer: D
What is the maximum supported number of cluster nodes for the EVA-File Services Cluster
Gateway?
A. 32
B. 24
C. 16
D. 12
Answer: C
Click the Exhibit button. What does the iSCSI Director Blade present to a Fibre Channel
target?

A. 1 iSCSI initiator
B. 1 virtual initiator
C. 2 iSCSI initiators
D. 2 virtual initiators
Answer: B
Your customer is thinking of implementing an HP Integrated Archive Platform. Before this is

done, you need to perform an HP ILM methodology assessment. What is your first step?
A. Classify important data.

B. Quantify the rate of change in data.
C. Determine archival needs as specified by government-enforced policy.
D. Determine existing storage volume and estimate future growth.
Answer: A

Your customer is implementing HP Continuous Access EVA between two EVA6100 Arrays,
and is configuring the DR groups. What is the maximum number of hosts the customer can
add into a DR group?
A. 128
B. 64
C. 32
D. 16
Answer: C
When creating a DR group for a Vraid5 Vdisk, how much space should you allow for the
log disk?
A. 126MB (Vraid5)
B. 136MB (Vraid1)
C. 1GB (Vraid5)
D. 20GB (Vraid1)
Answer: D
You have two EVA8100 arrays and want to implement HP StorageWorks Continuous
Access to replicate data between them. Which supported devices enable you to do this?
(Select two.)
A. fully meshed redundant ATM routers

B. HP StorageWorks IP Distance Gateway
C. HP StorageWorks SAN Director FC64
D. HP StorageWorks 400 Multi-Protocol Router
E. HP StorageWorks Edge 8/20q
Answer: B,D

Your customer has an EVA5000 with an HP Continuous Access Unlimited license and
wants to use CA on a new EVA4400. What must the customer do to accomplish this?
A. Apply the existing CA-EVA license on the new EVA8100.

B. Purchase the HP Return to Service license to migrate the existing CA-EVA license to
the EVA8100.
C. Purchase the HP Data Migration EVA4400 Series 90 Day Software license for their new
HP EVA4400.
D. Purchase the HP Continuous Access EVA5000 Upgrade to EVA4400 Unlimited license.
Answer: D
What does HP StorageWorks Continuous Access EVA provide?
A. highly available access to data and support for automated failover

B. host-based instant recovery through seamless host failover and seamless failover
process to DR location
C. highly available access to application through host-based replication and highly
available access to data
D. seamless failover process to DR location and support for automated failover
Answer: A
Which statements are correct about a container in an HP StorageWorks EVA? (Select two.)
A. It can be created from an existing Vdisk.

B. It must be the same size as the source.
C. It must reside in the same disk group as the source.
D. It must be the same or higher redundancy level for preallocated snapshots.
E. It can be presented to a host or used for storage.
Answer: A,B

Which multiple replication relationships does HP StorageWorks Continuous Access EVA
support?
A. fan-in, fan-out, cascaded

B. fan-out. cascaded, meshed
C. meshed, fan-in, cascaded
D. synchronous, asynchronous, bi-directional
Answer: A
The HP recommendation for latency over an FCIP network for an HP StorageWorks

Continuous Access EVA is 100ms. What is the recommendation for latency jitter?
A. maximum of 10ms
B. maximum of 15ms
C. maximum of 100ms
D. maximum of 200ms
Answer: A
Under which circumstance can a virtual disk be converted into a container?
A. when the Vdisk contains snapshot data

B. when the Vdisk is a fractured mirrorclone
C. when the Vdisk is presented to a host
D. when the Vdisk is a member of a DR group
Answer: B
In an HP StorageWorks EVA, when is a Log-full event received? (Select two.)
A. when it reaches 2TB in size

B. when the disk group triggers an occupancy alarm of above 85%
C. when there is no free space in the disk group

D. when no free space remains on the Vdisk in the DR group
E. when the log file reaches 1TB of Vraid1
Answer: A,C
Which statement is true about a DR group in Rundown Mode?
A. A DR group has been created and the initial copy from source to destination has nearly
completed.
B. A DR group is transitioning from asynchronous to synchronous mode.
C. Application writes are being synchronized from the DR log.
D. A DR group has normalized and is writing according to the replication policy.
Answer: B
When creating mirrorclones, which statements are correct? (Select two.)
A. The redundancy level of a mirrorclone must be the same or higher than its source.
B. A mirrorclone can be created from the disk that has snapshots.
C. A detached mirrorclone cannot be reattached to its source.
D. Neither the source disk or its mirrorclone can be a member of a DR group.
E. The maximum number of mirrorclones per source is two.
Answer: C,D
What are newly introduced features in HP StorageWorks Replication Solutions Manager

3.0? (Select two.)
A. DR Group log shrink

B. automatic host discovery
C. ability to manage groups of resources in a managed set
D. ability to automatically mount Vdisk on enabled hosts
E. single sign-on (SSO) through Launch Device Manager

Answer: A,E
What are benefits of HP Storageworks Continuous Access EVA? (Select two.)
A. reduces licensing costs

B. minimizes bandwidth utilization
C. allows simple integration with third-party arrays
D. allows simple deployment for accelerated payback
E. simplifies replication management
Answer: D,E
Which array-based replication offerings does HP Metrocluster support? (Select two.)
A. HP StorageWorks Storage Mirroring

B. EMC Symmetrix Remote Data Facility
C. HP StorageWorks Continuous Access EVA
D. EMC MirrorView on CLARiiON
E. HP StorageWorks Business Copy EVA
Answer: B,C
Your customer has an EVA6100 and has a requirement to back up their Microsoft
Exchange 2007 and Microsoft SQL 2005 environments. They want to leverage the EVA
snapclone functionality and Microsoft VSS framework, while maintaining a constant copy of
the data. Which product should you recommend to this customer?
A. HP Business Copy EVA

B. HP Application Recovery Manager
C. HP StorageWorks Fast Recovery Solutions
D. HP StorageWorks Continuous Access EVA
Answer: B


Exam HP0-J15

Uploaded by

Copyright:

Available Formats

Exam HP0-J15

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Exam HP0-J15

Uploaded by

Copyright:

Available Formats

s@lm@n

[ Total Questions: 106 ]

On an MSA2000, what is the pre-allocated reserve space for snapshot data?

What is the purpose of the Trust Virtual Disk?

A. storage of meta-data for all disks in an array

Which capabilities does the MSA2012fc provide?

A. dual-ported SATA drives; support for up to 64 hosts

"A Composite Solution With Just One Click" - Certification Guaranteed 2

A. The virtual disk size is reduced to accommodate the RAID level.

"A Composite Solution With Just One Click" - Certification Guaranteed 3

Question No : 9 DRAG DROP - (Topic 0)

"A Composite Solution With Just One Click" - Certification Guaranteed 4

A. No virtual disk exists on the system.

"A Composite Solution With Just One Click" - Certification Guaranteed 5

You are verifying whether an MSA2012fc environment is supported by HP and need to

"A Composite Solution With Just One Click" - Certification Guaranteed 6

A. the smallest disk size in the array

Question No : 16 DRAG DROP - (Topic 0)

"A Composite Solution With Just One Click" - Certification Guaranteed 7

A. fast recovery volume

What is controlled by Data Rollup?

A. when data is deleted

Question No : 20 DRAG DROP - (Topic 0)

"A Composite Solution With Just One Click" - Certification Guaranteed 8

"A Composite Solution With Just One Click" - Certification Guaranteed 9

A. The appstormanager service is not running.

"A Composite Solution With Just One Click" - Certification Guaranteed 10

A. Only HP Data Protector will be discovered by default.

What can the WBEMdisco utility be used to verify?

A. Sybase and AIX

"A Composite Solution With Just One Click" - Certification Guaranteed 11

Which component of HP Storage Essentials SRM forwards HP Systems Insight Manager

A. Stop all other CIM daemons.

"A Composite Solution With Just One Click" - Certification Guaranteed 12

A. the runcim.bat file

A. A managed switch reports all connected hosts WWNs.

"A Composite Solution With Just One Click" - Certification Guaranteed 13

A. storage reporting for Windows and UNIX hosts

A. SNIA library and SMI-S provider

"A Composite Solution With Just One Click" - Certification Guaranteed 14

A. small EVA SAN with few managed applications

A. report customization that is an optional feature

"A Composite Solution With Just One Click" - Certification Guaranteed 15

A. Wait approximately fifteen minutes to allow the Detail Scan to finish.

A. not assigned to a storage port or a host

A. detailed security scan for security impacts

"A Composite Solution With Just One Click" - Certification Guaranteed 16

A. storage growth planning

A. Policy Viewer and File System Viewer

A. only LDAP-enabled switches

"A Composite Solution With Just One Click" - Certification Guaranteed 17

What are benefits of logical fabrics?

A. reduces port count and minimizes fault propagation

Which features can be set up by the HP All-in-One Storage Manager?

A. network shares and Fibre Channel storage provisioning

"A Composite Solution With Just One Click" - Certification Guaranteed 18

"A Composite Solution With Just One Click" - Certification Guaranteed 20

In addition to RADIUS, which user password authentication service can be used on

A. B-Series 9400 Director