CV - M.A. Aleem (Electrcial Engineer) ...

CURRICULUM VITAE
Mohammad Abdul Aleem Mobile: + 966-599215125

Electrical & Electronics Engineer Email: aleem.220@hotmail.com,
Certified by Saudi Council of Engineers aleem.220@gmail.com
(Membership No. 235402)
 Objective:
I am an ambitious and experienced electrical engineer with significant industry knowledge gained via
working continuously with management teams, coordination with supervision of various projects On-
Shore and Construction.
I want to seek a profession where my knowledge and capabilities are utilized for the best growth of
the organization and my career.
 Academic Profile:
B-Tech in Electrical and Electronics Engineering (EEE) April – 2009
From: CMR College of Engineering and Technology (J.N.T.U.)
Diploma in Electrical –MEP (Designing and Drafting)
Certified PLC Programmer (CPP)
 B-Tech Project:
a. Electronic Devices & Circuits
b. Power Semi-Conductor Drives
c. Power system operation & Control
d. Non-Conventional Energy Sources
e. Electrical Distribution System
f. Power Electronic Lab.
g. Preparation of Engineering Drawing
h. Experience on Electrical Systems, Maintenance Service
 Certified PLC Programmer: October/November 2009

1. Programmable Logic Controllers
2. SCADA Software
1. Programmable Logic Controllers

Topics covered in PLC’s (Programmable Logic Controllers)
- Introduction to PLC hardware

- Architecture of PLC
- PLC Fundamentals
- Information about PLC components
(Power supply, CPU, I/O modules, Communication BUS)

- Source sink concept in PLC
- Concepts of flags
Practical Exposure on 3 leading Brands of PLC’s
1. GE Fanuc
2. Siemens
3. Allen Bradley
In which below are the topics that are done
- Introduction to PLC programming software

- Introduction to bit, byte and word concept
- Timer, Counter block programming
- File handling
- Trouble shooting and fault diagnosis of PLC
- Documenting the project
- Program Assignments for real time application
2. Supervisory Control & Data Acquisition (SCADA)

- Creating a new SCADA application
- Creating Database on Tags
- Creating and editing graphic display with animation
 Data entry / start stop command analog entry
 Sizing, movement, blinking, visibility, filling etc.
 Creating & accessing real-time, historical trends
- Creating Alarms and events
- Connectivity with hardware/software
- Communication Protocols
- “ with PLC
- “ with Data Acquisition system
- “ with Excel
- Commissioning with network nodes
- Troubleshooting the application
 Work Experience:
 Around 10 (ten) years & 6 (six) months of work experience –
1. Presently working as Electrical QC Inspector / Electrical Site Engineer with DBTC in
ARAMCO Project, South Dhahran (From August 14, 2016 to till date)
2. Worked as Electrical Site Engineer for Azmeel in ARAMCO Project, Thuwal (From June
21, 2014 to August 10, 2016)
3. Worked as QA/QC Electrical Inspector for United Turkish Construction Company (From
December 26, 2010 to June 10, 2014) in Al-Khafji Joint Operations (KJO) Project (Contract
No:HQ807PC09 – Construction of Senior & Junior Bachelor Quarters, Aviation Building & 4
Schools)
4. Worked in KJO Community & Business Services Department (CBD) as a QA/ QC Electrical
Engineer, under manpower supply thru Building Maintenance Contract No. 489 BM 05
Between Bader H. Al Hussaini Co. and AGOC/KGOC since 2 nd January 2010 till end of
contract on 30-4-2010
5. Worked as a Graduate Apprentice Trainee 6 months Electrical and Electronic Engineering

dealing in technical field. As Electrical Engineer participated in detail engineering design
review for electrical equipment estimate in CMR College – Engineering Projects.
 Job Description (Duties & Responsibilities)
1. As Electrical QC Inspector / Site Electrical Engineer June, 2014 - Present

(SAUDI ARAMCO projects: SDHOP – Dhahran Project & NGHP – Thuwal Project)
 Raising of Internal Request for Inspection (RFI’s) for electrical materials like conduits and
fittings, cables, panel boards etc.
 Coordinating with QC material Inspectors for Inspection of materials present in company’s
warehouse and preparing a report of it, then submitting it to the concerned Managers.
 Preparing of daily reports by collecting, analyzing, and summarizing information received
from site and sending it to the concerned Managers & Engineers on daily basis.
 Maintaining an E-Log for Outgoing and Incoming MEP Materials from company’s
warehouse.
 Responsible for following up from the procurement dept. for the delivery of electrical
materials on site. Likewise requesting for any further site material requirements.
 Inspecting & subsequently supervising the arrangement of Materials sent to Precast Panel
Factories for Site Usage
 Coordinating with MEP & Construction Managers for Raising Material Request. & RFI’s
 Documenting and submitting all conducted work reports to client.
 Ensuring compliance of client requirement for all the site works.

 Communicating with consultants & with concerned personals for resolving on-site issues.
2. As QA/QC Electrical Inspector Dec, 2010 – June 2014

(Al-Khafji Joint Operations [KJO] project)
 Follow up of the QA/QC program in accordance to Quality Inspection, Test Plans, Pre-
commissioning / energization activities
 Generating Request for Information (RFI), Material Inspection Report (MIR) and Field
Adjustment (FAD).
 Monitoring the electrical daily construction activities, schedule & progress and then reporting
it to QA/QC & Construction Manager.
 Handling QA/QC Electrical Documentation
 Ensuring of latest and approved drawings used at site.
 Inspecting the complete Installation of Power Supply for lighting (normal & emergency) with
conduits and Cable Trays, Cable Termination & Splicing, Portable Power Plant Installation,
Diesel Power Generator Systems, Power outlets, switches and isolators.
 Supervising Installation of High voltage equipment for Switchyard, Transmission line and,
Substation. Medium and low voltage Switch gear, Circuit Breakers and MCC with controls
and relay systems.
 Testing all electrical equipment in accordance to assist in updating Operations Function
codes, standards and procedures.
 Responding to (RFI) comments given by consultant & subsequently completing the electrical
system by taking the required action.
 Reviewing Inspection Test Plans (ITP)
 Co-ordination with Consultant and Client for scheduling of Inspections on Site.
 Witnessing Pre commissioning and commissioning testing.
 Inspecting the complete installation of Lightning Protection System, Access Control System,
Earthing and CCTV System.
 Issuing punch list for outstanding works on Site.
 Compiling all check sheets, involved with pre-commissioning, commissioning and start
up achieved prior to Site hand over to the client.
 Health and Safety responsibilities

 Assuring that all electrical activities are performed safely and in accordance with the safety
guidelines & policies
 Knowledgeable of Safety and Maintenance Procedures HSE regulations
 Providing guidance for safe work practices and personal protective equipment (PPE) used
by the company.
 Ensuring proper safety documentation of operating and maintenance instructions associated
with electrical equipment is present.
 Working under project operational safety procedures & measures
 Other Job Responsibilities:

 Worked for the testing, defect investigation, repair, overhaul, maintenance and Quality
control.
 Site Inspection and monitoring of electrical and electromechanical installation for power
lighting and control System.
 Prepared weekly and monthly program of works and coordinate with contractor for daily
routine activities at site.
 Scheduling and performing of activities on site as alleged by the Construction Manager
 Computer Skills (Hands On):
 Operating Systems : DOS, Windows98/2000/XP, Windows 7,
 Languages : AutoCAD (2006, 2007),
 Others : MS Word, Excel & Power Point (Presentations)
 Relevant Skills:
 Quick learning ability.
 Good interpersonal and communication skills.
 Good Analytical and Reasoning skills.
 Good problem solving & excellent writing skills

 Thorough knowledge of Electrical Principles
 Familiar with Auto CAD versions
 Personal Profile:
Date of Birth : 26.12.1986
Nationality : Indian
Marital status : Married
Iqama (Residence Permit) Status : Holding Transferrable Residence Permit
Driving License : Holding Valid Saudi Driving License
I hereby declare that the above mentioned statements are true to the best of my knowledge.

CV - M.A. Aleem (Electrcial Engineer) ...

Uploaded by

Copyright:

Available Formats

CV - M.A. Aleem (Electrcial Engineer) ...

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CV - M.A. Aleem (Electrcial Engineer) ...

Uploaded by

Copyright:

Available Formats

CURRICULUM VITAE

Mohammad Abdul Aleem Mobile: + 966-599215125

Diploma in Electrical –MEP (Designing and Drafting)

Certified PLC Programmer (CPP)

 Certified PLC Programmer: October/November 2009

1. Programmable Logic Controllers

- Introduction to PLC hardware

(Power supply, CPU, I/O modules, Communication BUS)

- Introduction to PLC programming software

2. Supervisory Control & Data Acquisition (SCADA)

5. Worked as a Graduate Apprentice Trainee 6 months Electrical and Electronic Engineering

1. As Electrical QC Inspector / Site Electrical Engineer June, 2014 - Present

 Ensuring compliance of client requirement for all the site works.

2. As QA/QC Electrical Inspector Dec, 2010 – June 2014

 Health and Safety responsibilities

 Other Job Responsibilities:

 Computer Skills (Hands On):

 Operating Systems : DOS, Windows98/2000/XP, Windows 7,

 Languages : AutoCAD (2006, 2007),

 Others : MS Word, Excel & Power Point (Presentations)

 Quick learning ability.

 Good interpersonal and communication skills.

 Good Analytical and Reasoning skills.

 Good problem solving & excellent writing skills

You might also like