Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    Ecoalube642TDS PDF

    Uploaded by

    DkC guns

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ecoalube642TDS PDF

    Uploaded by

    DkC guns
    61 views2 pages

    Original Title

    Ecoalube642TDS.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    61 views2 pages

    Ecoalube642TDS PDF

    Uploaded by

    DkC guns

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Technical Data 

    Ecoalube® 642 U.S.A. 1-800-428-7802 - 1-770-261-4800


    Europe 44 (0) 1386 421444
    MIL Spec, MoS2 Solid Film Lubricant www.everlubeproducts.com

    Product Description
    Ecoalube 642 is a thermally cured, MoS2 based solid film lubricant with a high molecular weight epoxy
    binder system. This coating provides excellent chemical resistance, wear life, abrasion resistance and
    performs best in higher load carrying applications. Ecoalube 642 is approved/qualified to many aerospace and
    industrial specification; these listings can be verified at http://www.everlubeproducts.com/specifications.php.
    When requesting pricing or ordering of product, listing of the specification and revision is required to assure
    product certification compliance
    Features / Benefits
     Excellent wear life  Excellent abrasion resistance
     Excellent chemical resistance  Ideal for higher load carrying applications
    Markets Typical Applications
     Aerospace/Defense  Bushings, shafts, splines and cams
     Mechanical Components  Slides, guides and rails
     Chemical Processing  Virtually all fasteners
     Industrial Machinery & Equipment  Threaded connectors and disconnects
    Physical Properties
    Lubricating Solid MoS2
    Binder High molecular weight epoxy
    Color and Appearance* Gray/Black matte finish
    Carrier Solvent Borne
    Solids (by weight)* 40% to 44%
    Density* 9.6 ± 0.5 lb/gal (1150 ± 60 grams/liter)
    Flash Point 24°F (-4°C)
    Volatile Organic Compound 695 grams/liter (5.8 lb/gal)
    1
    Theoretical Coverage 540 ft²/gal @ 0.5 mils (13.2 m²/liter @ 12.7 microns)
    Alternative or Repair Coatings A low VOC alternative coating for Ecoalube 642 is our
    Everlube 9002. For touch-up applications, Perma-Slik G or
    Lubri-Bond 220 works well with Ecoalube 642.
    Processing Information2
    Dry Film Thickness 0.2 to 0.5 mils (5 to 13 microns)
    Dilution/Cleanup Solvent MEK, 642 Solvent or 50/50 MEK/Toluene (by volume)
    Dilution Ratio (for spray) 1:3 (Product to Solvent by volume) Adjust as needed
    Cure Cycle 1 hr @ 400°F +/- 25°F
    Suggested Pretreatment Grit Blast and/or Phosphate
    Suggested Application Methods Dip Spin / Spray

    For additional information, please see Processing Bulletin # 3000-A


    Ecoalube® 642, MIL Spec, MoS2 Solid Film Lubricant
    Page 2 of 2
    Typical Functional Properties
    ASTM Test Method Value
    Corrosion Resistance*
    Test Panel ASTM B117 >100 hrs. @ 5% Neutral Salt Spray
    Test Panel Coating Method 0.8 mil on grit blasted steel panel
    Abrasion Resistance ASTM D4060 Excellent
    Coefficient of Friction ASTM D2714 0.04 to 0.08
    Operating Temperature Range (continuous) -365° to 400°F (-221° to 204°C)
    Load Carrying Capacity* ASTM 2625, Method B > 250,000 psi
    Wear Life* ASTM 2625, Method A > 450 minutes
    Pencil Hardness ASTM D3363 >4H (gouge)
    Thermal Stability ASTM D2511 Pass
    Film Adhesion ASTM D2510 Method A Pass
    Chemical Resistance (ASTM D-2510, Method C)
    Isopropyl Alcohol or Ethyl Alcohol Pass Diethanolamine Pass
    Mineral Spirits or Paint Thinner Pass Hydrochloric Acid (10%) Pass
    Toluene Pass Sodium Hydroxide (10%) Pass
    Acetone Pass Distilled Water Pass
    Skydrol 500 Pass Jet Fuels (JP-4) Pass
    Hydraulic Fluids Pass Trichloroethylene: Pass
    Anti-Icing Fluids Pass Cleaning Compound Pass
    Trichlorofluoroethane Pass Reagent Water Pass
    Substitute Ocean Water Pass
    Silicone Based Damping Fluid Pass Turbine Fuel Pass
    Low Temp Weapon Lube Oil Pass Aircraft Lube Oil Pass
    Weapons Lubricant, Cleaner & Preservative Pass Lubricant, Semi-Fluid Pass
    Note: Chemical resistance may vary depending on the cure cycle. N/R = Not recommended
    Additional Information
    Shelf Life and Storage:
    One year from date of shipment, stored in a factory sealed container between the temperatures, 40F to 100F.
    Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature
    range listed above.

    Packaging:
    Ecoalube 642 is available in Gallons, 5-gallon pails, Quarts
    Warranty:
    No representation of warranty is expressed or implied and all warranties including warranties of marketability and fitness
    for use are expressly disclaimed. Nothing herein shall be construed as permission or recommendation to practice a
    patented invention without a license.

    * These tests are performed on each production lot


    1
    Based on 100% transfer efficiency at a dry film thickness of 0.0005 inch (12.5 microns).

    Issue Date: 8/19/02, Latest Revision Date: 6/26/13

    This document is for technical reference only and is not intended for use in developing a specification. Specification writers should contact Technical Director of Research and
    Development. The information supplied is presented in good faith and has been derived from sources believed to be reliable. Since conditions of use are beyond our control,
    all risks are assumed by the user.

    You might also like