Isometrics Mass Quick Start Guide
Isometrics Mass Quick Start Guide
Isometrics Mass Quick Start Guide
DISCLAIMER
No part of this publication may be reproduced in any form or by any means, including
printing, scanning, photocopying, or otherwise without the prior written permission of
the copyright holder.
The author has attempted to present information that is as accurate and concrete as
possible. The author is not a medical doctor and does not write in any medical
capacity. All medical decisions should be made under the guidance and care of your
primary physician. The author will not be held liable for any injury or loss that is
incurred to the reader through the application of any of the information herein
contained in this book.
The author makes it clear that the medical field is fast evolving with newer studies
being done continuously, therefore the information in this book is only a researched
collaboration of accurate information at the time of writing. With the ever-changing na-
ture of the subjects included, the author hopes that the reader will be able to
appreciate the content that has been covered in this book.
While all attempts have been made to verify each piece of information provided in this
publication, the author assumes no responsibility for any error, omission, or contrary
interpretation of the subject matter present in this book.
Please note that any help or advice given hereof is not a substitution for licensed
medical advice. The reader accepts responsibility in the use of any information and
takes advice given in this book at their own risk. If the reader is under medication
supervision or has had complications with health related risks, consult your primary
care physician as soon as possible before taking any advice given in this book.
1
ISOMETRICS MASS QUIC K START GUIDE
If you’d prefer to WATCH me go through this quick start guide, follow this link:
https://youtu.be/QZ8MnJLwK84
You will perform your sets as followed.
There will be 3 sets per exercise: the interconnection, iso-mass, and breakdown set.
Each set plays a crucial role in the training program. It is recommended that you take
notes with you to the gym to maintain consistency.
Set 1 is called the interconnection set.
The purpose of this set is not only to warm up the muscles, but to focus on the mind
and muscle connection. The rep range for the interconnection set is 12-15. The weight
should not be so light that you can perform more than 15 reps but not so heavy that
you can’t reach the 12 rep mark. Rest 30-45 secs before starting set 2.
Set 2 is the iso-mass set.
The purpose of this set is to recruit more motor units and increase time under tension.
This leads to growth and strength in the muscle. The rep range is 10-12 with the
same principals as the interconnection set. The weight should not so light that you can
perform more than 12 reps but not so heavy that you cannot reach 10 reps. Remem-
ber, controlled movement at all times. It is called weight lifting not weight jerking.
Right after the last rep you will hold an isometric contraction at the mid-point of the
range for 10 seconds. When doing the isometric hold focus on the mind and muscle
connection while flexing the muscle as hard as possible. You should be shaking like a
leaf from the amount of energy being used. Rest 45-60 secs before starting set 3.
2
Set 3 is the breakdown set.
The purpose of this set is to finish breaking down the muscle tissue, which leads to
the muscle growing back bigger and stronger. For this set you’ll use the same weight
used for the iso-mass set and perform as many reps as possible before form
breakdown (a.k.a performance failure). This is where you leave it all. Keeping your
form tight on this set is crucial. Stay focused on the mind and muscle connection.
Rest 3-5 mins before starting next exercise.
How To Progress
The Interconnection Set:
In the Isometric Mass Workout program you’ll notice that the Interconnection Set
prescribes a rep range (i.e. 12-15).
The goal with this set is to start off with a weight that you can just barely perform for
the maximum number of reps (15).
Once you’re able to complete the maximum number of reps, then and only then will
you increase the weight the following week. Add 5 pounds to the bar and aim for 15
reps, if you manage to hit all 15 reps, an increase in weight the following week is
warranted. If, however, you fail to reach the maximum number of reps, keep the
weight the same next week and try again.
For Example:
Week 1: 45 lbs x 15 Reps
Week 2: 50 lbs x 13 Reps
Week 3: 50 lbs x 15 Reps
Week 4: 55 lbs x 12 Reps
And so forth.
3
Iso-Mass Sets:
The iso-mass set prescribes a rep range (i.e. 10-12) and 10 second isometric hold.
The goal with this set is to start off with a weight that you can just barely perform for
the maximum number of reps (12) and 10 second isometric hold.
Once you’re able to complete the maximum number of reps, while still being able to
complete a 10 second isometric hold, then and only then will you increase the weight
the following week.
Add 5 pounds to the bar and aim for 12 reps, if you manage to hit all 12 reps while be-
ing able to complete the 10 second isometric hold, an increase in weight the following
week is warranted. If, however, you fail to reach the maximum number of reps—or fail
to complete to 10 second hold—keep the weight the same next week and try again.
For Example:
Week 1: 25 lbs x 12 Reps + 10 Second Iso
Week 2: 30 lbs x 12 Reps + 7 Second Iso
Week 3: 30 lbs x 12 Reps + 10 Second Iso
Week 4: 35 lbs x 10-12 Reps + 10 Second Iso
And so forth.
Breakdown sets:
During this set you will use the same exact weight as the iso-mass sets.
If that results in using the same exact weight as the previews week, then your goal is
simply to increase the number of reps you are able to perform. For example, if you
where able to perform 13 reps with the prescribed weight, then your goal would be to
do 14 reps or more the following week.
On the other hand, if you had to increase the weight due to achieving the rep goal
during the iso-mass set the previous week, then your goal with the breakdown set is
simply to perform as many sets as possible with the new weight.
4
For Example:
Week 1: 30 lbs x 13
Week 2: 30 lbs x 15
Week 3: 35 lbs x 12
Week 4: 35 lbs x 13
And so forth.
Breaking down the 4 day training split
Day 1
Workout 1- Back & Triceps
Day 2
Workout 2- Shoulders, traps, and abs
Day 3
Off day
Day 4
Workout 3- Quads, Hams and Calves
Day 5
Off day
Day 6
Workout 4- Chest, Biceps, and Abs
Day 7
Off day