http://www.freewebmasterhelp.

com/tutorials/phpmysql

Part 1 – Introduction

Introduction
For many people, the main reason for learning a scripting language like PHP is because of the interaction
with databases it can offer. In this tutorial I will show you how to use PHP and the MySQL database to
store information on the web and include it into your website. Before you read this tutorial you should
have at least a basic knowledge of how to use PHP. If you do not yet know PHP, I suggest that you read
our PHP tutorial before continuing.

Why Would I Want A Database?

It is actually surprising how useful a database can be when used with a website. There are a huge variety
of things you can do when you interact the two, from displaying simple lists to running a complete website
from a database. Some examples of PHP and MySQL being used together are:

• Banner Rotation. On this site, where each banner is, a PHP script is called. This opens a
database and picks a random banner from it to show the visitor. It also counts the number of
times the banner has been viewed and could, with a few changes, track clicks too. To add,
change or edit the banners all I have to do is change the database and the script will pick the
correct banners for all the pages on the site.
• Forums. Hundreds of forums (message boards) on the internet are run using PHP and MySQL.
These are much more efficent than other systems that create a page for each message and offer
a wide variety of options. All the pages in the forum can be updated by changing one script.
• Databases. One quite obvious example is sites which get all there information from a database.
For example Script Avenue is run by a few scripts, which gain all their information from a large
database. All the different script categories can be accessed in one script by just changing the
URL to access a different part of the database.
• Websites. If you have a large website and you want to change the design it can take a very long
time to update and upload all the pages. With PHP and MySQL your whole website could be just
one or two PHP scripts. These would access a MySQL database to get the information for the
pages. To update the website's design you would just have to change one page.

What Do I Need?
You only really need three things to run PHP scripts which access MySQL databases. Firstly, you will, of
course, need a webserver. This can either be on a computer of your own or on a web host. Any web
server software should work with PHP and MySQL but the best to use is Apache, which is free.

PHP also needs to be installed on the server. If it is not already installed you can install it (or ask your
web host to install it). It can be downloaded from PHP.net and is also free. If you are not sure if you have
PHP installed I will show you a way to check it later.

Finally, you will also require MySQL. This is the actual database software. You can also use most other
types of database (SQL, Oracle etc.) but as this is a PHP/MySQL tutorial I will deal just now with the
MySQL database (although the commands used here will also work with SQL databases). As with the
other software you need, MySQL is free and can be downloaded from the MySQL homepage. If you are
not sure if you have MySQL installed, I will show you how to check later.
If you cannot install (or your web host won't allow) PHP and MySQL you can still use another web host.
Freedom2Surf are a free (banner supported) web host and support PHP and have MySQL installed.
HostRocket are an excellent web host and can offer you 300MB of space with PHP, MySQL and loads of
other extras for under $10 a month.

Testing For PHP and MySQL

There is a simple test for both PHP and MySQL. Open a text editor and type in the following:

<?
phpinfo();
?>

and save it as phpinfo.php

Now upload this to your webspace and go to i

t in your browser. If you have PHP installed you will see a huge page with all the details of your PHP
installation on it. Next, scroll down through all this information. If you find a section about MySQL then you
will know that MySQL is installed.

Managing Databases
Although all the database administrative options can be done through PHP scripts, I strongly suggest
installing a copy of PHPMyAdmin on your server. It is an excellent free set of scripts that will provide you
with an administrative interface for your MySQL database(s). You can add, remove, edit, backup and view
your databases using this and it is especially useful when troubleshooting your databases.

This Tutorial
Throughout this tutorial I will be showing you some of the basics of using PHP and MySQL together. To
do this I will be using an example all the way through. As you use this tutorial, you will learn how to create
a web based contact management program. It will allow you to store names with their addresses, e-mail
and phone numbers. You will be able to update records and search the database. There will even be an
option which allows you to send an e-mail out to all the people in the database (please note: this system
should not be used for spam or unsolicited e-mail).

After creating this system you should have enough knowledge to go on and create nearly any type of
database enabled site you want to.

Part 2 - Setting Up the Database

Introduction
Before you actually start building your database scripts, you must have a database to place information
into and read it from. In this section I will show you how to create a database in MySQL and prepare it for
the data. I will also begin to show you how to create the contacts management database.

Database Construction
MySQL databases have a standard setup. They are made up of a database, in which is contained tables.
Each of these tables is quite separate and can have different fields etc. even though it is part of one
database. Each table contains records which are made up of fields.
Databases and Logins
The process of setting up a MySQL database varies from host to host, you will however end up with a
database name, a user name and a password. This information will be required to log in to the database.

If you have PHPMyAdmin (or a similar program) installed you can just go to it to log in with your user
name and password. If not you must do all your database administration using PHP scripts.

Creating a Table
Before you can do anything with your database, you must create a table. A table is a section of the
database for storing related information. In a table you will set up the different fields which will be used in
that table. Because of this construction, nearly all of a site's database needs can be satisfied using just
one database.

Creating a table in PHPMyAdmin is simple, just type the name, select the number of fields and click the
button. You will then be taken to a setup screen where you must create the fields for the database. If you
are using a PHP script to create your database, the whole creation and setup will be done in one
command.

Fields
There are a wide variety of fields and attributes available in MySQL and I will cover a few of these here:
Field Type Description
TINYINT Small Integer Number
SMALLINT Small Integer Number
MEDIUMINT Integer Number
INT Integer Number
VARCHAR Text (maximum 256 characters)
TEXT Text

These are just a few of the fields which are available. A search on the internet will provide lists of all the
field types allowed.

Creating A Table With PHP

To create a table in PHP is slightly more difficult than with MySQL. It takes the following format:

CREATE TABLE tablename {

Fields

The fields are defined as follows:

fieldname type(length) extra info,

The final field entered should not have a comma after it.

I will give full an example of using these later in the section.

The Contacts Database
The contacts database will contain all the conact information for the people you enter and the information
will be able to be edited and viewed on the internet. The following fields will be used in the database:

Name Type Length Description

id INT 6 A unique identifier for each record
first VARCHAR 15 The person's first name
last VARCHAR 15 The person's last name
phone VARCHAR 20 The person's phone number
mobile VARCHAR 20 The person's mobile number
fax VARCHAR 20 The person's fax number
email VARCHAR 30 The person's e-mail address
web VARCHAR 30 The person's web address

You may be wondering why I have used VARCHAR fields for the phone/fax numbers even though they
are made up of digits. You could use INT fields but I prefer to use VARCHAR as it will allow dashes and
spaces in the number, as well as textual numbers (like 1800-COMPANY) and as we will not be initiating
phone calls from the web it is not a problem.

There is one other thing you should be aware of in this database. The id field will also be set as
PRIMARY, INDEX, UNIQUE and will be set to auto_increment (found under Extra in PH
PMyAdmin). The reason for this is that this will be the field identifier (primary and index) and so must be
unique. The auto increment setting means that whenever you add a record, as long as you don't specify
an id, it will be given the next number.

If you are using PHPMyAdmin or a management program you can now create this in a table called
contacts.

Creating The Table In PHP

The following code should be used to create this table in PHP. Some of the code has not been covered
yet but I will explain it fully in the next part.

<?
$user="username";
$password="password";
$database="database";
mysql_connect(localhost,$user,$password);
@mysql_select_db($database) or die( "Unable to select database");
$query="CREATE TABLE contacts (id int(6) NOT NULL auto_increment,first varchar(15) NOT NULL,last
varchar(15) NOT NULL,phone varchar(20) NOT NULL,mobile varchar(20) NOT NULL,fax varchar(20)
NOT NULL,email varchar(30) NOT NULL,web varchar(30) NOT NULL,PRIMARY KEY (id),UNIQUE id
(id),KEY id_2 (id))";
mysql_query($query);
mysql_close();
?>

Enter your database, MySQL username and MySQL password in the appropriate positions on the first
three lines above.

Part 3 - Inserting Information

Introduction

Over the past two parts I have explained what I am planning to do in this tutorial and have shown you how
to create a database to use with the tutorial. In this part I will be showing you how to insert some
information into your database so that it is more useful.

Connecting To The Database

The first thing you must do before you can do any work at all is to connect to the MySQL database. This
is an extremely important step as, if you are not connected, your commands to the database will fail.

Good practice for using databases is to specify the username, password and database name first so that
if you change any of them at a later date you will only have to change one line:

$username="username";
$password="password";
$database="your_database";

At this point you may be wondering if it is a security risk, keeping your password in the file. You don't
need to worry, though, because the PHP scource code is processed aby the server before being sent to
the browser so it is impossible for the user to see the script's source.

Next, you will need to issue the command to start a database connection:

mysql_connect(localhost,$username,$password);

This line tells PHP to connect to the MySQL database server at 'localhost' (localhost means the server
that the site is running one. Unless you web host tells you otherwise you should use localhost. If you are
given a server address (such as sql.myserver.com you should replace localhost with "sql.myserver.com"
(including the quotes)) using the username stored in $username and the password in $password.

Before I show you how to work with the database, I will show you one more command:

mysql_close();

This is a very important command as it closes the connection to the database server. Your script will still
run if you do not include this command but too many open MySQL connections can cause problems for a
web host. It is good practice to always include this line once you have issued all your commands to the
database, to keep the server running well.

Selecting The Database

After you have connected to the database server you must then select the database you wish to use. This
must be a database to which your username has access. The following command:

@mysql_select_db($database) or die( "Unable to select database");

is used to do this. This tells PHP to select the database stored in the variable $database (which you set
earlier). If it cannot connect it will stop executing the script and output the text:

Unable to select database

This extra 'or die' part is good to leave in as it provides a little error control but it is not essential.

Executing Commands

Now you have connected to the server and selected the database you want to work with you can begin
executing commands on the server.

There are two ways of executing a command. One is to just enter the command in PHP. This way is used
if there will be no results from the operation.

The other way is to define the command as a variable. This will set the variable with the results of the
operation.

In this part of the tutorial we will use the first way as we are not expecting a response from the database.
The command will look like this:

mysql_query($query);

The useful thing about using this form of the command is that you can just repeat the same command
over and over again without learning new ones. All you need to do is to change the variable.

Inserting Data

For this part of the tutorial I will return to the contacts database which we created in the last part. We will
now add our first information to the database:

First: John
Last: Smith
Phone: 01234 567890
Mobile: 00112 334455
Fax: 01234 567891
E-
mail: johnsmith@gowansnet.com
Web: http://www.gowansnet.com

This will all be put in with one command:

$query = "INSERT INTO contacts VALUES ('','John','Smith','01234 567890','00112 334455','01234

567891','johnsmith@gowansnet.com','http://www.gowansnet.com')";

This may look a little confusing at first so I will explain what it all means.

Firstly $query= is there because we are assigning this to the variable $query (see the section above). The
next part:

INSERT INTO contacts VALUES

is quite easy to understand. It tells the PHP to insert into the table called contacts the values in the
brackets which follow.

The part in the brackets contains all the information to add. It uses all the fields in order and inserts the
information from between the quotes. For example:

John

will be inserted into the 2nd field which, in this table, is the 'first' field.

You may have noticed that you are not inserting any value into the first field in the database (id). This is
because this field is going to act as an index field. No two records in the database will have the same ID.
Because of this, when we set up the database we set ID to 'Auto Increment'. This means that if you
assign it no value it will take the next number in the series. This means that this first record will have the
ID 1.

Part 4 - Displaying Data

Introduction

So far in this tutorial, you have created a database and put information into it. In this part I will show you
how to create an input page for your database, and how to display the whole contents.

HTML Input

Inputing the data using HTML pages is almost identical to inserting it using a PHP script. The benefit,
though, is that you do not need to change the script for each piece of data you want to input and you can
also allow your users to input their own data.

The following code will show an HTML page with textboxes to enter the appropriate details:
<form action="insert.php" method="post">
First Name: <input type="text" name="first"><br>
Last Name: <input type="text" name="last"><br>
Phone: <input type="text" name="phone"><br>
Mobile: <input type="text" name="mobile"><br>
Fax: <input type="text" name="fax"><br>
E-mail: <input type="text" name="email"><br>
Web: <input type="text" name="web"><br>
<input type="Submit">
</form>

This page could, of course, be formatted and have other changes made to it. It is just a basic form to get
you started. Next you will need to edit the script from last week. Instead of using information to input into
the database, you will instead use variables:
<?
$username="username";
$password="password";
$database="your_database";

$first=$_POST['first'];
$last=$_POST['last'];
$phone=$_POST['phone'];
$mobile=$_POST['mobile'];
$fax=$_POST['fax'];
$email=$_POST['email'];
$web=$_POST['web'];

mysql_connect(localhost,$username,$password);
@mysql_select_db($database) or die( "Unable to select database");

$query = "INSERT INTO contacts VALUES ('','$first','$last','$phone','$mobile','$fax','$email','$web')";

mysql_query($query);

mysql_close();
?>

This script should then be saved as insert.php so that it can be called by the HTML form. It works
because, instead of the data being entered locally, it is being entered into the form and stored in variables
which are then passed to the PHP.

You could also add to this script a message confirming the data input. This is basic PHP, though, and you
should read the PHP tutorial if you do not know how to do this.

Outputting Data

Now you have at least one record, if not many more, in your database you will be wanting to know how
you can output this data using PHP. Before beginning, though you should be familiar with loops in PHP
(you can find out about them in the tutorial on Free Webmaster Help) as they are used for this way of
outputting data.

The first command you will need to use is a MySQL query made up like this:

SELECT * FROM contacts

This is a basic MySQL command which will tell the script to select all the records in the contacts table.
Because there will be output from this command it must be executed with the results being assigned to a
variable:

$query="SELECT * FROM contacts";

$result=mysql_query($query);

In this case the whole contents of the database is now contained in a special array with the name $result.
Before you can output this data you must change each piece into a separate variable. There are two
stages to this.

Counting Rows

Before you can go through the data in your result variable, you must know how many database rows
there are. You could, of course, just type this into your code but it is not a very good solution as the whole
script would need to be changed every time a new row was added. Instead you can use the command:

$num=mysql_numrows($result);

This will set the value of $num to be the number of rows stored in $result (the output you got from the
database). This can then be used in a loop to get all the data and output it on the screen.

Setting Up The Loop

nYou must now set up a loop to take each row of the result and print out the data held there. By using
$num, which you created above, you can loop through all the rows quite easily. In the code below, $i is
the number of times the loop has run and is used to make sure the loop stops at the end of the results so
there are no errors.

$i=0;
while ($i < $num) {

CODE

$i++;
}

This is a basic PHP loop and will execute the code the correct number of times. Each time $i will be one
greater than the time before. This is useful, as $i can be used to tell the script which line of the results
should be read. As the first line in MySQL output is 0, this will work correctly.

Assigning The Data To Variables

The final part of this output script is to assign each piece of data to its own variable. The following code is
used to do this:

$variable=mysql_result($result,$i,"fieldname");

So to take each individual piece of data in our database we would use the following:
$first=mysql_result($result,$i,"first");
$last=mysql_result($result,$i,"last");
$phone=mysql_result($result,$i,"phone");
$mobile=mysql_result($result,$i,"mobile");
$fax=mysql_result($result,$i,"fax");
$email=mysql_result($result,$i,"email");
$web=mysql_result($result,$i,"web");

We do not need to get the ID field (although we could have done) because we have no use for it in the
current output page.

Combining The Script

We can now write a full script to output the data. In this script the data is not formatted when it is output:

<?
$username="username";
$password="password";
$database="your_database";

mysql_connect(localhost,$username,$password);
@mysql_select_db($database) or die( "Unable to select database");
$query="SELECT * FROM contacts";
$result=mysql_query($query);

$num=mysql_numrows($result);

mysql_close();

echo "<b><center>Database Output</center></b><br><br>";

$i=0;
while ($i < $num) {

$first=mysql_result($result,$i,"first");
$last=mysql_result($result,$i,"last");
$phone=mysql_result($result,$i,"phone");
$mobile=mysql_result($result,$i,"mobile");
$fax=mysql_result($result,$i,"fax");
$email=mysql_result($result,$i,"email");
$web=mysql_result($result,$i,"web");

echo "<b>$first $last</b><br>Phone: $phone<br>Mobile: $mobile<br>Fax: $fax<br>E-mail:

$email<br>Web: $web<br><hr><br>";

$i++;
}

?>

Part 5 - More Outputs

Introduction

Throughout this tutorial you have learnt how to create a database and table, insert information and display
the database information. In this part I will show you more ways of displaying and outputting the
information in the database.

Formatting Output

In the last part of the tutorial we output a list of all the people stored in the database. This just gave us a
very basic output, though and is not particularly useful for a working website. Instead, it would be better if
we could format it into a table and display it like this.

Doing this formatting is not particularly complicated. All you need to do is use PHP to output HTML and
include your variables in the correct spaces. The easiest way to do this is by closing your PHP tag and
entering the HTML normally. When you reach a variable position, include it as follows:

<? echo $variablename; ?>

in the correct position in your code.

You can also use the PHP loop to repeat the appropriate code and include it as part of a larger table. For
example, using a section of the code from part 4 which looped to output the database you can format it to
display it in one large table:

<table border="0" cellspacing="2" cellpadding="2">

<tr>
<th><font face="Arial, Helvetica, sans-serif">Name</font></th>
<th><font face="Arial, Helvetica, sans-serif">Phone</font></th>
<th><font face="Arial, Helvetica, sans-serif">Mobile</font></th>
<th><font face="Arial, Helvetica, sans-serif">Fax</font></th>
<th><font face="Arial, Helvetica, sans-serif">E-mail</font></th>
<th><font face="Arial, Helvetica, sans-serif">Website</font></th>
</tr>

<?
$i=0;
while ($i < $num) {

$first=mysql_result($result,$i,"first");
$last=mysql_result($result,$i,"last");
$phone=mysql_result($result,$i,"phone");
$mobile=mysql_result($result,$i,"mobile");
$fax=mysql_result($result,$i,"fax");
$email=mysql_result($result,$i,"email");
$web=mysql_result($result,$i,"web");
?>

<tr>
<td><font face="Arial, Helvetica, sans-serif"><? echo $first." ".$last; ?></font></td>
<td><font face="Arial, Helvetica, sans-serif"><? echo $phone; ?></font></td>
<td><font face="Arial, Helvetica, sans-serif"><? echo $mobile; ?></font></td>
<td><font face="Arial, Helvetica, sans-serif"><? echo $fax; ?></font></td>
<td><font face="Arial, Helvetica, sans-serif"><a href="mailto:<? echo $email; ?>">E-mail</a></font></td>
<td><font face="Arial, Helvetica, sans-serif"><a href="<? echo $web; ?>">Website</a></font></td>
</tr>
<?
$i++;
}

echo "</table>";

This code will print out table headers, then add an extra row for each record in the database, formatting
the data as it is output.

As long as you are familiar with PHP and HTML the code is probably pretty self explanatory but I will just
point out the last two lines in the table, for example:

<a href="mailto:<? echo $email; ?>">E-mail</a>

This shows one of the useful features of using PHP to include MySQL data as you can use it to output
parts of your code and make pages fully dynamic.

Selecting Pieces of Data

As well as showing the whole database, PHP can be used to select individual records, or records which
match certian criteria. To do this you must use a variation of the SELECT query. To display the whole
table we used the query:

SELECT * FROM contacts

If we just wanted to select ones who had the first name 'John' you would use the following query:

SELECT * FROM contacts WHERE first='john'

As with other MySQL queries, it is almost like plain english. In the same way you could select records
based on any field in the database. You can also select ones with more than one field by adding more:

field='value'

sections onto the query.

Although I won't go int

o great depth about it in this section, you can also use variables to give the database criteria. For
example, if you had a search form you could get the last name people wanted to search for and store it in
a variable called $searchlast. Then you could execute the following piece of code:

$query="SELECT * FROM contacts WHERE last='$searchlast'";

$result=mysql_query($query);

Please note that at the end of the first line there is a ' followed by a " before the semicolon.

Security

At this point it should be noted that you must be very careful in using the technique given above. Without
correct secuirty measures, it would be very easy for someone to access data on your server, or even
make changes to the database. This can occur if the user sets the variable to a value which edits the SQL
string being generated in such a way that it can be used for their own purposes. I won't go into full details
here, but there are many websites which give full details (search for 'sql injection attack').

This security hole is easy to plug with a bit of work. Always check input data for invalid chanracters and
use PHP's built in functions to remove control characters and HTML code etc. Again, there are many
websites which go into this in depth.

Part 6 - Single Records & Error Trapping

Introduction

In the past two parts of this tutorial I have shown you how to take data out of the database and display it
on screen. In this part I will enter into the final aspect of this data displaying, selecting one piece of data
and stopping errors from happening when you output data.

Error Trapping

By outputting all the information from the database, it is quite unlikely that there will be no data, but if you
allow updating and deleting of records, it is certainly a possibility. Luckily, with PHP and MySQL, there is
an easy way round this using:

$num=mysql_numrows($result);

where $result contains the result of a query on the database (like selecting all the records). As I expalined
before, this will set the value of $num as the number of rows in the result (and it was used in a loop in part
4). Because of this you can make a simple error trap using an IF statement:

if ($num==0) {
echo "The database contains no contacts yet";
} else {
Output Loop
}

You can expand on this more by making it more user friendly (for example by providing a link to the Add
Data page if no contacts exist).

Ordering Data

Not only can you output data based on the contents of a field, but you can also order the output based on
a field (for example placing users in alphabetical order). By default, the output from your queries will be in
order of the id field, going from 1 upwards. You can sort it on any field, though.

For example, a useful sort would be to place all the users in alphabetical order based on their last name.
For those not familiar with standard databases, this would be in Ascending order as it goes from A to Z.
(Ascending order is also for 1-10 etc. and descending order provides Z to A and 10-1). To do this you
would use the following query:

SELECT * FROM contacts ORDER BY last ASC

You could also use DESC to order the data in Descending order.

More Uses Of mysql_numrows and Sorting

The value you have assigned to $num is very imiportant as, apart from error trapping and loops, it has
many other uses. An example of this would be to print out only the last 5 records added to a database.
Firstly, they would need to be placed into order based on the id field (as the one with the latest ID would
have been added last. This would require them to be in Descending order.

Now you have them in order of newest to oldest but this does not restrict the script to only showing the
first 5. To do this, you would need to set your loop to run to 5 instead of $num (as this would only run the
loop 5 times so only 5 records would be output).

Of course, before doing this, it would be important to check that $num was greater than 5, as if you ran
the loop 5 times and there were only 3 rows you would get an error. This is easy to do though and the
following code is an example of the sort of thing you would want to have:

if ($num>5) {
$to=5;
}else{
$to=$num;
}

$i=0;
while ($i < $to) {
REST OF CODE

This code would check if there were more than 5 rows in the database. If there were, the loop would be
set to run 5 times. If there were less than 5 rows the loop would run the correct number of times to output
the whole database.

The ID Field

If you remember back to creating the database for the contacts at the beginning of this tutorial, you will
remember that we included a numerical field called id. This field was set as auto_increment as well as
being the primary field. I have already explained how this field is unique for every single record in the
database, but I will now take this a stage further by explaining how this can be used to select an individual
record from a database.

Selecting A Single Record

At the end of the last part of this tutorial, I s

howed you how to select records from the database based on the contents of partiular fields using:

SELECT * FROM contacts WHERE field='value'

Now, by using the unique ID field we can select any record from our database using:

SELECT * FROM contacts WHERE id='$id'

Where $id is a variable holding a number of a record. This may seem to be a little worthless as it is, but
you can use this very effectively in a number of different ways. For example, if you wanted to have a
dynamically generated site run through a database and a single PHP script, you could write the script to
include the database data into the design. Then, using the id field, you could select each individual page
and put it into the output. You can even use the page's URL to specify the record you want e.g.

http://www.yoursite.com/news/items.php?item=7393

And then have the PHP script look up the record with the id corresponding to $item, which in this case
would be 7393
Links For Single Records

Using this method of choosing a record using the URL to select the record can be expanded further by
generating the URL dynamically. This sounds a bit complicated so I will elaborate. In the contacts script
we are writing, I will be showing you how to create an Update page where the user can update the
contact details.

To do this, another column will be included in the output column, with an Update link in it. This update link
will point to a page allowing the user to update the record. To select the record in this page, we will put:

?id=$id

By getting the id of the record along with the other information when we are outputting the information
from the database, this code will create a link which has each record's ID number in it. Then, on the
update page, there can be code to just select this item.

Part 7 - Updating & Deleting

Introduction

So far you have learnt how to put information into your MySQL database, view the information in it and
select which information you would like to view. In this part I will show you how to do the two final actions,
updating your database and deleting records from it.

The Update Script

Last week I explained how to create a link for each record to point to your update script. By using the $id
variable you output links which would pass the correct ID to the script so that it can update the database.
Using this you can then create the update script, which will actually have two sections to it.

Displaying The Update Page

The first part of the update script uses the single record selection from last week but adds a little HTML to
it to make it more useful. First of all, we connect to the database and select the appropriate record.

$id=$_GET['id'];
$username="username";
$password="password";
$database="your_database";
mysql_connect(localhost,$username,$password);

$query=" SELECT * FROM contacts WHERE id='$id'";

$result=mysql_query($query);
$num=mysql_numrows($result);
mysql_close();

$i=0;
while ($i < $num) {
$first=mysql_result($result,$i,"first");
$last=mysql_result($result,$i,"last");
$phone=mysql_result($result,$i,"phone");
$mobile=mysql_result($result,$i,"mobile");
$fax=mysql_result($result,$i,"fax");
$email=mysql_result($result,$i,"email");
$web=mysql_result($result,$i,"web");

Space For Code

++$i;
}

Where 'Space For Code' is in this script is where the code for the update page will go. This is, in fact, just
HTML formatting for the output:

<form action="updated.php" method="post">

<input type="hidden" name="ud_id" value="<? echo $id; ?>">
First Name: <input type="text" name="ud_first" value="<? echo $first; ?>"><br>
Last Name: <input type="text" name="ud_last" value="<? echo $last; ?>"><br>
Phone Number: <input type="text" name="ud_phone" value="<? echo $phone; ?>"><br>
Mobile Number: <input type="text" name="ud_mobile" value="<? echo $mobile; ?>"><br>
Fax Number: <input type="text" name="ud_fax" value="<? echo $fax; ?>"><br>
E-mail Address: <input type="text" name="ud_email" value="<? echo $email; ?>"><br>
Web Address: <input type="text" name="ud_web" value="<? echo $web; ?>"><br>
<input type="Submit" value="Update">
</form>

As you can see, this code will output a standard form, but instead of having blank boxes like on the form
for inserting a new record, this one already has the current information from the database inserted into it.
This makes it much more effective for an update script.

Updating The Database

The next stage of this script is to actually update the database. This is a simple operation and just
involves a new query for the database:

$query = "UPDATE contacts SET first = '$ud_first', last = '$ud_last', phone = '$ud_phone', mobile =
'$ud_mobile', fax = '$ud_fax', email = '$ud_email', web = '$ud_web' WHERE id = '$ud_id'";

This query tells the database to update the contacts table where the ID is the same as the value stored in
$ud_id (which as you can see from the form on the previous page was set as the id of the record we are
updating) and to set the following fields to the specified values (which were set using the form on the
previous page).

This query could then be integrated into a simple script:

$ud_id=$_POST['ud_id'];
$ud_first=$_POST['ud_first'];
$ud_last=$_POST['ud_last'];
$ud_phone=$_POST['ud_phone'];
$ud_mobile=$_POST['ud_mobile'];
$ud_fax=$_POST['ud_fax'];
$ud_email=$_POST['ud_email'];
$ud_web=$_POST['ud_web'];

$username="username";
$password="password";
$database="your_database";
mysql_connect(localhost,$username,$password);
$query="UPDATE contacts SET first='$ud_first', last='$ud_last', phone='$ud_phone',
mobile='$ud_mobile', fax='$ud_fax', email='$ud_email', web='$ud_web' WHERE id='$ud_id'";
mysql_query($query);
echo "Record Updated";
mysql_close();

This code would update the database and give the user a confirmation.

Deleting Records

The final part of the contacts database which needs to be created is a page to delete records. As with the
Update page, this should have a record ID sent to it in the URL e.g.:

delete.php?id=9

The code to do this is the same as to update the database, except with a slightly different MySQL query.
Instead of the UPDATE query you should use:

DELETE FROM contacts WHERE id='$id'

This would then be used with the connection and confirmation code as above.

Loops

At this time it seems appropriate to mention another use of loops with a database. As well as using a loop
to get information from a database as we have before, you can also use loops to execute queries. For
example, if you wanted to change all the records in the database with the last name Smith to have the
website www.smith.com:

Standard Database Connection Code

$query=" SELECT * FROM contacts WHERE last='Smith'";

$result=mysql_query($query);
$num=mysql_numrows($result);

$i=0;
while ($i < $num) {
$id=mysql_result($result,$i,"id");
$query1="UPDATE contacts SET web='http://www.smith.com' WHERE id='$id'";
mysql_query($query);
++$i;
}

mysql_close();

Of course, this could have been achived far easier and quicker using:

$query1="UPDATE contacts SET web='http://www.smith.com' WHERE last='Smith'";

and no loop.
Part 8 - Finishing The Script
Introduction

Throughout this tutorial I have taught you how to use PHP to interact with a MySQL (or SQL) database
and how to use the most common commands available. I have, throughout this tutorial, also shown you
how to create a basic contacts management system to illustrate some of the options you can use. In this
part I will show you some final MySQL tips and will give you a final version of the script.

Saving Time

When creating complex scripts using databases you will find that the most common thing you are doing is
connecting to a database. Because of this, you can actually save time by creating either a
username/password file or a connection file. For example for a username/password file you would create
a file called:

dbinfo.inc.php

and put the following in it:

<?
$username="databaseusername";
$password="databasepassword";
$database="databasename";
?>

Replacing the appropriate sections. Then in your php files use the following code:

include("dbinfo.inc.php");

or

include("/full/path/to/file/dbinfo.inc.php");

at the beginning. Then, you can use the variables $username, $password and $database throughout your
scripts without having to define them every time. Also, if you ever change this information, for example if
you move to another web host, there is only one file to change.

You can use the same principal to connect to the database, by putting the connection code in the file, but
you must always be sure to close the connection in each file or you may have problems with your MySQL
server.

Searching

A limited form of searching can also be performed on your database using a built in MySQL function. This
is by using the LIKE function as follows:

SELECT * FROM tablename WHERE fieldname LIKE '%$string%'

To explain furhter, LIKE tells the database to perform its 'searching' feature. The % signs mean that any
other data could appear in their place and $string would hold your search string. In this place could be a
word or number as well e.g.:

LIKE '%piano%'
which would output any rows with piano in the specified field.

Similarly, you can leave out one of the % signs so that you can specify the position of the string e.g.:

LIKE 'piano%'

Will only output rows where the specified field begins with piano, so:

The piano is next to the table.

Would not show up.

The Finished Script

Throughout this tutorial I have given you pieces of code to make a contacts database script. You can
download the full script as a zip file so that you can examine the code (see Related Links).

Conclusion

From this tutorial you should now know the basics of using PHP and MySQL together to create database-
enabled websites and programs. Using databases with the web opens up a huge new selection of things
you can do and can make a simple website much more powerful, saving time updating the site, allowing
user interaction and feedback and much more.