Hydraulic Breakers

XPline

Hydraulic breakers
Hydraulic breakers are today’s most versatile working tool for excava- Eventual limits indicated by carrier’s manufacturer are always binding.
tors. It is the main actor in different applications when operating on hard On bigger excavator (heavier than 13 tons) it is generally possible to
ground, a must, when it comes to excavating foundations, demolition, choose between two models.
trenching, quarrying, tunneling and road construction. Matching the heaviest possible hammer from the specification chart will
Promove offers today a wide range of models to fit all excavators on the maximize productivity of the excavator-hammer-operator combination.
market, delivering breaking performance and reliability at highest level. It is recommended in the following cases:
Our models of XP range offer unique features, highly appreciated on the  Breaking on medium-hard rock
hardest job site around the world:  Heavy and long-lasting applications
 On excavators with a monolithic boom
 Combined power from gas and oil: outstanding power/weight ratio;  Primary breaking in quarrying
hydraulic stability, rebound of the piston absorbed by gas results in  In case of frequent use
low vibrations & low stress on hoses (lower pressure peaks)
 Outstanding performance to weight ratio Matching a lighter model is possible:
 High back pressure allowed (up to 25 bars) makes installation easy  If breaking concrete or soft rock
on every excavator, including the newest models, with no need to  For non-heavy applications
change the return line going straight to the tank and bypassing the  On excavators with three-piece arm
filter and the cooler  For secondary breaking in quarrying (reducing oversizes)
 In case of occasional use
Choosing your breaker
The right hammer/excavator matching is driven by some factors like Promove team of experts is always available to provide information on
carrier’s weight and hydraulic flow, boom and stick configuration, main best matching.
use of the equipment.
Hydraulic breakers


Auto-greasing system in-  Silenced casings with internal  Low-pressure nitrogen cham-  Square-section cylinder with
creases productivity and top, bottom and side shock ber over the head of the piston encased tie-rods: high resist-
avoids stopping for manual absorbers completely insulat- absorbs excessive vibrations re- ance to stress with extended
greasing. Quantity of grease ing the power unit. Low noise turning energy to the percussion. tie-rods life and reduction of
supplied can be easily adjust- and vibration level! the risk of piston seizures in
ed according to job conditions the case of tie-rod breakage.
in order to always deliver the
optimal lubrication  Working pressure adjustment
valve.

 Just two moving parts: piston

and spooling valve. Reliability
and performance at top level!

 Blank firing prevention sys-

tem: the hammer only starts if
it is pushed on the ground and
 Frequency/energy adjustment stops once the rock is broken,
valve allows regulating the avoiding damages to tools, re-
energy of the stroke according tainers and chuck housing.
to hardness of the rock. The
operator can easily set up the  No residual blows: the ham-
hammer to have the appropri- mer immediately stops firing
ate production/speed of work. when oil flow is stopped.
XP7000 - XP4500 - XP3100 - XP2400 - XP2000 - XP1700 - XP1200 - XP1000 - XP800

Technical specifications XP7000 XP4500 XP3100 XP2400 XP2000 XP1700 XP1500 XP1200 XP1000 XP800
Kg 6900 4380 3090 2350 1950 1700 1450 1200 1000 750
Working weight lbs 15212 9656 6798 5170 4298 3740 3196 2640 2200 1650
ton 70 / 130 45 / 80 30/48 24 / 35 22 / 29 19 / 28 16 / 25 14 / 20 12 / 18 9 / 15
Carrier’s weight (min/max) lbs 154,324/286,601 99,000/176,367 66,000/105,000 52,800 / 77,000 48,500 /63,900 41,900 /61,700 35,200 /55,000 30,800/44,000 26,400/39,600 19,000 /33,000
mm 4200 3800 3500 3200 3000 2700 2600 2500 2300 2250
Total height in 165,35 150 138 126 118 106 102 98 90.6 89
mm 210 180 160 150 145 135 130 120 110 100
Tool diameter in 8.27 7.09 6.3 5.91 5.70 5.31 5.12 4.72 4.3 3.94
Useful length of standard mm 800 700 690 685 675 670 570 550 550 520
tool in 31.5 27.6 27.2 27 26.6 26.4 22.4 21.7 21.7 20.5
l /min 380 / 420 290 / 330 190 / 240 170 / 190 170 / 190 150 / 170 140 / 150 100 / 130 100 / 130 90 / 110
Oil flow min/max gpm 100 / 111 76.6 / 79.3 50.3 / 63.5 44.9 / 50.2 44.9 / 50.2 39.6 / 44.9 34.3 / 39.6 26.4 / 34.4 26.4 / 34.4 23.7 / 29.1
bar 180 / 190 180 / 190 180 / 190 180 / 190 180 / 190 170 / 180 170 / 180 165 / 175 165 / 175 165 / 175
Working pressure min/max psi 2611 / 2756 2611 / 2756 2611 / 2756 2611 / 2756 2611 / 2756 2466 / 2611 2466 / 2611 2393 / 2538 2393 / 2538 2393 / 2538

Blows per minute 1/min 239 / 432 249 / 432 233 / 576 307 / 523 307 / 523 371 / 932 332 / 593 339 / 718 339 / 718 538 / 720

Impact energy joule 22370 16871 13112 7878 7878 5526 5448 4496 4496 3602
XP551 - XP400 - XP300 - XP250 - XP150 - XP101 - XP70

PB versions feature two-sided

casings with direct fit on the
stick through pins & bushings

Technical specifications XP 551 XP 400 XP 300 XP 250 XP 150 XP 101 XP 70

Kg 550 430 300 240 160 100 85
Working weight lbs 1210 947 660 528 352 220 187
Kg 295 220 130 90 75
Working weight PB version lbs
- -
650 484 286 198 165
ton 6/12 5,5/10 4,0/9,0 3,0/5,2 1,8/4 1,0/2,5 0,8/1,8
Carrier’s weight (min/max) lbs 13,200 /26,400 12,100 /22,000 8,800 /19,800 6,600 /11,440 3,960 /8,800 2,200 /5,500 1,760 /3,960
mm 1900 1620 1450 1350 1260 1098 1050
Total height in 75 64 57 53 50 43 41.2
mm 87 80 80 64 56 42 42
Tool diameter in 3.42 3.15 3.15 2.52 2.20 1.65 1.65
mm 480 390 380 370 280 270 270
Useful length of standard tool in 18.9 15.4 15 14.6 11 10.6 10.6
l/min 80/100 70/80 50/60 35 /45 25 /35 15/25 15
Oil flow (min/max) gpm 21 /26 18.5 /21 13.2 /15.8 9.2 /11.9 6.6 /9.2 4.0/ 6.6 4.0
bar 130/150 120/140 110 /130 120/130 120/130 110/110 110
Working pressure (min/max) psi 1885/2250 1740/2100 1650/1885 1740/1885 1740/1885 1650/1650 1650
Blows per minute 1/min 693 / 867 521 / 595 552 / 663 701 / 901 731 / 1024 526 / 838 526 / 838

Impact energy joule 1450 1440 946 559 417 350 210
 November 2016

PROMOVE s.r.l.
via Luigi Gambardella 10
70056 Molfetta, Bari - Italia
Tel +39.0803387054
Fax +39.0803387004
info@promove.it
www.promove.it