Professional Documents
Culture Documents
Opel Socomec: Hydraulic Rock Breakers
Opel Socomec: Hydraulic Rock Breakers
The elimination of tie-rod bolts from the breaker also eliminates the most common cause of downtime.
Moreover the serious consequences of using a breaker with an undetected broken bolt are eliminated. Service
operations are very easy and economical. By simply removing the accumulator, all bushings and the piston are
immediately accessible.
SILENCED VERSION
The piston is not directly in contact with the cylinder but it slides
in a series of guide bushings. When resealing is necessary it is
possible to remove the piston and bushings without loosening the
breaker tie-rods. This cost saving design is exclusive to OPEL -
SOCOMEC.
Energy for Stroke (joule) 120 240 310 500 630 750 900 1080 1350
Max. Frequency (c/min) 1200 1200 1200 1200 1100 1000 900 900 900
50 - 80 - 100 -
Max Oil flow (l/min) 17 - 25 27 - 40 30 - 45 40 - 55 70 60 - 80 70 -95 110 120
Max Working Pressure
(bar) 120 120 120 120 120 120 120 120 120
Hammer Weight in
Working Conditions (kg) 60 95 150 210 260 310 410 510 740
Tool (mm) 38 45 55 62 68 72 80 85 95
Height of the Hammer
with tool W/O plate (mm) 750 1000 1050 1200 1300 1450 1550 1700 1800
Minimum Width (mm) 125 130 165 190 195 205 225 235 255
Max exhaust back
pressure (bar) 20/30 20/30 20/30 20/30 20/30 25 25 25 25
Carrier Weight Skid steer 1.2 - 2.8 - 3.8 -
(t) 1.8 1.8 - 3 3.8 5.5 5 -7
Carrier Weight Excavator 0.7 - 1.2 - 2.8 - 3.8 - 6.5 - 9.5 -
(t) 1.2 1.8 1.8 - 3 3.8 5.5 5 -7 9.5 8 - 11.5 13.5
Carrier Weight Backhoe 2.8 - 3.8 - 6.5 -
(t) 1.8 - 3 3.8 5.5 5 -7 9.5 8 - 11.5
MEDIUM HEAVY RANGE MDO
HAMMER TYPE MDO 1000 TS MDO 1300 TS MDO 1700 TS MDO 2300 TS MDO 3200 TS
Max. Frequency (c/min) 600 - 800 500 - 680 480 - 650 460 - 630 450 - 600
Minimum Width (mm) 290 x 310 315 x 370 365 x 390 401 x 426 430 x 490
Max exhaust back pressure
(bar) 10 10 10 10 10
Satheesh Kumar.S
Engineer – Marketing,
Tel: +91 99620 43500
Email: info@opelequip.com