Field Operator: Diploma in Mechanical Engineering
Field Operator: Diploma in Mechanical Engineering
Field Operator: Diploma in Mechanical Engineering
Make regular routine checks of all Equipment and Units to ensure that they are functioning
correctly in accordance with Standard Operating Procedure.
Well startup and shutdown according to CCR instructions ( self flow, jet pump, ESP,
water injection ) choke bean up or bean down ( master flow, Cameron ) pressure
bleeding on B casing.
Safe-work Permit system and issue/close permit with related certi fi cates.
To carryout safety start up and shutdown activities as per procedures.
Using PPE equipment in worksite.
Check for any abnormalities and reporting to the concerned departments.
Handover oil well for servicing, wireline job, slick line job, CTU etc.
Coordination with well intervention team like slick line, E- line, CTU. Handover the well pad
for drilling rig.
Handover equipment for maintenance.
Changing over equipment according to schedule and procedures.
Collecting and recording details of chemical consumption and stock.
Start and flow adjustment in metering chemical injection pump such as Demulsifier, Scale
Inhibitors, H2S Scavenger, Corrosion inhibitor.
Chemical unloading and chemical injection into down hole, Production Manifolds,
and Injection manifold (Corrosion Inhibitor, Scale Inhibitors, H2S scavenger,
demulisifier).and dosing rate change according to the PPM.
Chemical injection pump operations both High Pressure and Low Pressure, strainer
cleaning.
Carryout necessary house keeping work.
Check the work permit (cold, hot& spark potential) and allow for prescribed work.
Greasing and integrity check X mas tree valves.
Well testing through MPFM & also through mobile MPFM .
Periodically conduct pigging in crude oil and water line.( Bi-di batch, foam,
brush,MFL )
Much knowledge on PTW, Tool box meet, JSA, SCBA, Gas testing.
Updating the log sheet of all parameter every 2 hours, proper handover to shift
reliever.
Separator Operations:
All stations have a Test Separator and a Test manifold which is used to select and feed in
any one of the wells within the station area. A safety shutdown valve is installed in the
line between the manifold and vessel. The separator is Three-phase and is provided with
a means of accurately measuring the quantity of each phase; an inferential meter for
the Gas, and a displacement meter for each liquid. As well as oil quantities, oil qualities
are also monitored by drawing off small samples for laboratory testing. All phase have
an automatic control system. Liquid outputs are easily totaled from the meter readings
taken during the test period. Gas output totals require calculations to be made after the
test operation is completed.
pumps:
Compressors:
Tank Farm:
Handling Of Floating Roof Tank, Cone Roof, and Dome Roof Tanks for
Kerosene, Diesel, Crude, and ATF. Sphere, Bullets Storage for LPG, Proplyn Gases.
Loading Operations:
Gas De-Hydration:
Dry Chemical powder and CO2 Fire Water sprinkler system, fusible plugs,
deluge valve, foam tank, fire & gas panel (pyrotronics), automatic / manually release
system, fire and gas detectors, H2S & flare fuel gas system and water seal.
Physical Effort And Work Environment: 100% of work time is spent outside exposed to
prevailing weather conditions. Moderate exposure to heat, noise and dirt. Checking
plant and equipment, Operating Manual valves and House keeping.
Receiving crude from diff erent gathering stati ons, free water knock out drum,
slug catcher, heat exchangers, chiller, crude oil separati on through separators,
sedimentati on & storage tank, produced water & skimmer tank, fl are KOD.
Operati ons of Crude oil separati on unit, Chemical dosing unit, Uti lity unit like
instrument air & Nitrogen generati on system, Reciprocati ng and Centrifugal
pumps for crude oiltransfer, Hot water circulati on unit, Boilers Instrument air
compressors, In Direct Water Bath heaters, Diesel & Gas generators.
FIRE&SAFETY
PERSONAL DETAILS
Name : A.SELVA LEON
Marital Status : Unmarried
Nationality : INDIAN
Technical qualification : DIPLOMA IN MECHANICAL ENGINEERING
Languages known : English, Hindi, Tamil
Contact Address : 2/64 West car street, Rajakrishnapuram,
Tamil Nadu.
Pin code: 627114
PASSPORT DETAILS
Passport number : S1004919
Emigration details : ECNR
Place of issue : Madurai
Date of issue : 17-05-2018
Date of expiry : 16-05-2028
DECLARATION
I hereby declare that above information’s are true and correct in best my knowledge.