Honeywell

V5013F AND B VALVES ARE THREE-WAY MIXING VALVES

(TWO INLETS AND ONE OUTLET) FOR CONTROL OF HOT
AND COLD WATER. THE V5013C IS FOR DIVERTING APPLI-
CATIONS (ONE INLET AND TWO OUTLETS).

V5013B,C,F 0 V5013B CJ V5013C Ct V5013F

THREE-WAY
l Valves require a (Q618 or (Q601 Linkage and control motor
to position the valve.

VALVES l Constant total flow through full plug travel.

lSpring-loaded, self-adjusting, Teflon cone or Teflon/rubber

packing allows a wide range of water temperature and pres-
sure.

l Stainless steel stem prevents corrosion.

NOTE: Mixing and diverting valves are not interchangeable.

Misapplication will result in unbalanced flow pressures
on valve plug configurations that can result in the valve
slamming shut, pipe vibration, and rapid wear on valve
plugs.

SPECIFICATIONS
MODELS:
V5013F-Three-Way Mixing Valve with screwed valve and con- connections.
nections. V5013C-Three-Way Diverting Valve with flanged valve end
V5013B-Three-Way Mixing Valve with flanged valve and connections.

Table 1.
Valve Dimensions
Face-To- 1 Center Line Valve
Face 1 To B o t t o m End
Model I I I Connec-
No. tions
V5013F Screwed
b

V5013B Flanged
b

I I
16-1/2 4 1 9 lo-Ii/t6 271.5

16-1/2 4 1 9 IO-Ii/l6 271.5

a Represents maximum pressure difference between the outlet and either of the two inlets (or between the inlet and either of the two outlets).
b Flanged bodies conform to A.N.S.1. specifications for Class 125 cast-iron pipe flanges and flanged fittings. Valve flanges are flat faced with a smooth finish. Screwed
bodies conform to A.N.S.I. specifications for Class 150 bronze valves and fittings.
c For mixing service only.
d For diverting service only.
e Q601 P is for use with 4” to 6” V50 1 Q601 Q is for use with i/2” to 3” V5013.
f For use with 300 lb. in Modutrol Motors.
VALVE LIFT: 3/4 in. [19 mm] for models up to 3 inches; l-112 in. [38
mm] for 4 to 6 inch models, 2 in. [Sl mm] for 8 inch models.
PRESSURE-TEMPERATURE RATINGS: See Fig. 1.

S.H. Form Number 63-1111

3-89 0 Honeywell Inc. 1989
MATERIALS: TABLE 3-ADDENDUMICROSS REFERENCE V5011 F,G VALVES.
O.S. Number I Valve 1 Dim”K I Dim”B” I Dim”C”
Bodv TvDe ‘V5OllC1565 l/2" 1 1 13/16” 1 1 12/16" 1 3 6/16”
Components V5013F V5013B,C
Valve Bodva Cast-bronze Cast-iron
Stem Stainless Steel Stainless Steel
PllJFl Brass Bronze
Seat Brass Bronze,
Removable
Packna Teflon/Rubber Teflon Cone

a Body material should be similar to that of the system in which the valve is
installed.
Forquietwaterstice-20 psig maximum differentialatany position.

V5011GllO3 2 3 2116 2 5 10116

'V5011A6436 2 2 15/16 2 5 IO/16
V5011F1188 2 3 2/l6" 2 5 10116"
'V5011C1458 2-l/2" 2 906" 2 6/16" 7 8/16"
V5011G1111 2-l/2 2 12/16 2 6/16 7 8116
'V5011A6444 2-112" 2 g/16" 2 6/16 7 8116
V501iF1196 2-l/2 2 12/16 2 6/16 7 8116
'V5OllC1516 3 2 15/16" 2 lo/l6 8 l4/16
V5011G1129 3 3 2H6 2 10/16" 8 14116
l V5OllA6451 3" 2 15/16" 2 10116 8 14/16"
V5OllF1204 3 3 2/16 2 10/16 8 14/16

ig. l-V5013F SCREWED BODY DIMENSIONS AND CROSl

REFERENCE. “S013F (SCRWD)

/ANSI CLASS IS0

Table P-ADDENDUM/CROSS REFERENCE V5013F VALVES. 250

0.3. Number 1 Valve 1 Dim”A” 1 Dim”B” 1 Dim”C”
l V5013Aii87 1 l/2" 1 1 9/16" 1 2 12/16" 1 3 8/16"
V5013F1079 l/2" 1 12/16 2 10116 3 8116 200

'V5013A1195 314 1 g/16" 2 10116" 3 6/16

V5013F1087 314 1 12/16 2 8/l6" 3 6/16" 150
\.-
“5013B.C (FLGD)
'V5013A1203 1" 1 11116" 2 13/16" 3 14/l6"
ANSI CLASS 125

V5013F1095 1" 1 14116" 2 IO/16 6 14/16 100

'V5013A1211 l-114 1 13/16" 2 12116" 4 4116
V5013F1103 l-114" r 2 10/16" 4 4116
V5013A1229 l-112 2 3116 2 14116" 4 12/l@ 50

V5013Fllll l-112 2 6/16" 2 12/16 4 12/16"

'V5013A1237 2 2 7116" 3 4116" 5 1406" 0
V5013F1129 2 2 lo/16 3 2116 5 14/16 0 50 100 150 200 250 300 350

FLUID TEMPERATVRE (F)

NOTES;

1. FOR HIGH FLUID TEMPERATURES. THE VALVE AND/OR PlPlNG SHOULD

BE INSULATED TO PREVENT AMBENT TEMPERATURE FROM
EXCEEDING RATINGS.

2. MAX,M”M TEMPERATURE DlFFERENTlAL IN ALTERNATE HOT-COLD

WATER USE. 140 F. E2217

Fig. 3-A.N.S.I. LINE PRESSURE FLUID TEMPERATURE P.S.I.

CHART.

Table 4-A.N.S.I. LINE PRESSURE FLUID TEMPERATURE

Item I V5011 F,G V5013F

PRESSURE RATINGS

Fig. 2-V5011F,G SCREWED BODY DIMENSIONS AND CROSS

REFERENCE.

PRINTED IN U.S.A.