Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Important Questions Computer Networks: Question Bank

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Important Questions Computer Networks

 Explain briefly about layers in OSI model with examples each ?


 Explain the concept of transmission media present in physical layer?
 Explain the random access protocols with a example each?
 Explain the design issues of network layer?
  List out advantage of token passing protocol over CSMA/CD
protocol?
 Describe Why are protocols needed?

Question Bank

 Start and Stop bits are used in a serial communication for [ ]


a. Error Detection b. Error Correction c. Synchronization d. None
 A high speed communication equipment typically would not be needed [ ]
a. Email b. Message c.LAN Communication d. None
 The method communication in which transmission takes place in both directions, but
only in one direction at a time is called________ [ ]
a. Simplex b.Half duplex c. Full duplex d. None
 Protocols are [ ]
a. Agreement on how communication components
b. Physical communication channels are used for transferring data
c. Both a&b
d. None
 How layers are there in TCP/IP model [ ]
a. 4Layers b. 7 Layers c. 6 Layers d. 8 Layers
 How many bits are there in Ethernet address [ ]
a. 64 bits b. 32 bits c. 16 bits d. None
 The Network Layer concerns with [ ]
a. Bits b. Frames c. Packets d. None
 The 4 bit IP address consists of [ ]
a. Network address b. Port address c. both a&b d. None
 Multi Access Control is Divided in to [ ]
a. 2 b. 3 c. 4 d. 1
 Error detection at the Data Link Level achieved by [ ]
a.Cyclic redundancy code b. Bit Stuffing c. Hamming Code d. Equalization
 In pure ALOHA, channel utilization, expressed throughput S, in terms of offered load
G is given by ____________

 Ethernet uses ________________ coding.

 When the frame returns to the sending station, that station removes the frame from
the ring by a process called ________________.

 ______________ ensures that error free data is transferred between the adjacent
nodes in the network.

 The last address of IP Address represents _______________.


 ______________________ Layer of OSI model also called end to end layer.

 _____________________ provides a connection oriented reliable service for sending


Messages.

 Bridge works in ___________________ layer of OSI model.

 The technique in which the data link layer automatically stuff bit ‘0’ after five
consecutive 1’s____________________.

 In _________________ scheme transmission proceeds immediately if the carrier is


Idle.

You might also like