Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
658 views

Process Validation Record-Forging Rolling

This document is a process validation record that summarizes the validation of a manufacturing process. It includes the machine, part number, material, and grade being processed. The process parameters and product specifications are observed over time at specified intervals. Notes indicate that one piece is observed every ten minutes with temperature processes observing five pieces at once in different locations. Remarks conclude whether the process is validated or not validated based on whether the product specifications remained within specification limits after keeping the process parameters frozen.

Uploaded by

Vandana Mehra
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
658 views

Process Validation Record-Forging Rolling

This document is a process validation record that summarizes the validation of a manufacturing process. It includes the machine, part number, material, and grade being processed. The process parameters and product specifications are observed over time at specified intervals. Notes indicate that one piece is observed every ten minutes with temperature processes observing five pieces at once in different locations. Remarks conclude whether the process is validated or not validated based on whether the product specifications remained within specification limits after keeping the process parameters frozen.

Uploaded by

Vandana Mehra
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Doc. No.

QSF-2001
PROCESS VALIDATION RECORD Rev. No. 00
Date 15.06.11
Page No. 1 of 1

Process: Item.: Shift Date

Machine/Furnace.: Part No.: Material: Grade:

Specified Observation with time


Process/ Product
S.NO. No.of pcs. 1 2 3 4 5 Remarks
parameter
Time
Process Parameters

Product Parameters

Note:: (1) Process validation is done by keeping process parameter freezed and take one pc.for observation
in every ten minutes time interval.For Hardening, Tempering& Dacro take 05 nos. of pcs. in one time at
different location of the leap.

REMARKS: HERE WE DO/ DO NOT OBSERVE ANY PROCESS FAULT AND PRODUCT SPECIFICATIONS ARE
WITH IN/OUT SPECIFICATION LIMIT AFTER KEEPING PROCESS PARAMERS FREEZED.

HENCE THIS PROCESS IS VALIDATED / NOT VALIDATED..


PREPARED BY: APPROVED BY:
ISSUED BY: APPROVED BY:

You might also like