Name - Hastings AP Physics 1 Mr. Willie Midterm Exam Review-3

Name ____________________ Hastings AP Physics 1
Mr. Willie Midterm Exam Review-3

1. A small block of mass 0.15 kg is placed at point A at a height 2.0 m above the bottom of a
track, as shown in the figure above, and is released from rest. It slides with negligible friction
down the track, around the inside of the loop of radius 0.60 m, and leaves the track at point C at a
height 0.50 m above the bottom of the track.
(a) Calculate the speed of the block when it leaves the track at point C.
(b) On the figure below, draw and label the forces (not components) that act on the block when it
is at the top of the loop at point B.
1. continued
(c) Calculate the minimum speed the block can have at point B without losing contact with the
track.
(d) Calculate the minimum height hmin above the bottom of the track at which the block can be
released and still go around the loop without losing contact with the track.
2. You are to perform an experiment investigating the conservation of mechanical energy
involving a transformation from initial gravitational potential energy to translational kinetic
energy.
(a) You are given the equipment listed below, all the supports required to hold the
equipment, and a lab table. On the list below, indicate each piece of equipment you
would use by checking the line next to each item.
____ Track ____ Meterstick ____ Set of objects of different masses

____ Cart ____ Electronic balance ____ Lightweight low-friction pulley
____ String ____ Stopwatch
(b) Outline a procedure for performing the experiment. Include a diagram of your
experimental setup. Label the equipment in your diagram. Also include a description of
the measurements you would make and a symbol for each measurement.
(c) Give a detailed account of the calculations of gravitational potential energy and
translational kinetic energy both before and after the transformation, in terms of the
quantities measured in part (b).
2. (continued)
(d) After your first trial, your calculations show that the energy increased during the
experiment. Assuming you made no mathematical errors, give a reasonable explanation
for this result.
(e) On all other trials, your calculations show that the energy decreased during the
experiment. Assuming you made no mathematical errors, give a reasonable physical
explanation for the fact that the average energy you determined decreased. Include
references to conservative and nonconservative forces, as appropriate.
Annotated Answers to the AP Physics 1 MT Rev 3 Multiple-Choice
1. B. The vacuum chamber removes air resistance. All objects fall with the same acceleration
in the absence of air resistance, so at the end of one meter, each object has attained the
same speed:
2a(x – xo) = v2 – vo2.
2. C. Power = Work/time = mgh/t = (700 N)(8 m)/10 sec = 560 W. Note: 700 N = mg.
3. E. Conservation of momentum: mv = (m + M)V, or V = mv/(m + M).
4. C. The rain has no horizontal velocity before it lands in the cart. Once it lands in the cart, it
gains horizontal velocity, so this must come from the horizontal velocity that the cart had
before the rain fell in. The cart with its increased mass must slow down.
5. C. A Watt is a Joule/sec, so both are power. Kilowatt-hours are units of power times time;
this is energy. (one kilowatt-hour is 3.6 megajoules)
Question 2
15 points total Distribution
of points
(a) 1 point
For choosing the meterstick and stopwatch, regardless of what else is checked 1 point
(b) 4 points
For a procedure that indicates the height needed to calculate gravitational potential 1 point
Energy
For a procedure that indicates distance and time measurements to calculate velocity 1 point
For a diagram and a clear indication of the height measurement 1 point
For a diagram and a clear indication of the distance measurement 1 point
Example #1
mc
mb H
h
 Use the electronic balance to determine the mass mc of the cart and the mass mb of one
object.
 Attach the object to the cart using the string.
 Place the cart on the track and hang the object so that the string passes through the pulley.
 Allow the object to fall a distance h from its initial position to the floor, using the
meterstick to measure the distance fallen.
 Use the stopwatch to measure the time t it takes the object to fall the distance h.
 Measure the height H of the table.
Question 2 (continued)
Distribution
of points
(b) continued
Example #2
 Use the electronic balance to determine the mass m of the cart.

 Set the track at an incline, and measure the height h of the incline.
 Place the cart at the top of the incline, and release from rest.
 Using the stopwatch, measure the time t it takes for the cart to move down the
incline.
 Measure the distance d that the cart moves down the incline.
(c) 6 points
For a clear indication of the initial potential energy of the system 1 point
For a clear indication of the final potential energy of the system 1 point
For a clear indication of the initial kinetic energy of the system 1 point
For a clear indication of the final kinetic energy of the system 1 point
For a correct calculation of the instantaneous velocity of the system 2 points
Example #1
Initial gravitational potential energy: Ug0 = mcgH + mbgh
Final gravitational potential energy: Ugf = mcgH
Initial kinetic energy: K0 = 0
Final kinetic energy: Kf = ½(mc+mb)vf 2
Acceleration is constant, so d = 1/2(vo+vf)t, where d is the distance along the track.
vf = 2h/t
Question 2 (continued)
Distribution
of points
(c) continued
Example #2
Initial gravitational potential energy: Ug0 = mgh
Final gravitational potential energy Ugf = 0
Initial kinetic energy K0 = 0
Final kinetic energy K0 =1/2mv2
Acceleration is constant, so d = ½(vo+vf)t
vf = 2d/t
(d) 2 points
For identifying a reasonable cause for the increase in energy 1 point
For a reasonable explanation related to the cause identified 1 point
Example
An unintentional push was applied to the cart, thus increasing the initial energy.
(e) 2 points
For identifying a reasonable cause for the decrease in energy related to the 1 point
nonconservative forces acting on the system
For a reasonable explanation related to the cause identified 1 point
Example
Friction acting on the object decreases the speed, thereby decreasing the energy.

Name - Hastings AP Physics 1 Mr. Willie Midterm Exam Review-3

Uploaded by

Copyright:

Available Formats

Name - Hastings AP Physics 1 Mr. Willie Midterm Exam Review-3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Name - Hastings AP Physics 1 Mr. Willie Midterm Exam Review-3

Uploaded by

Copyright:

Available Formats

Name ____________________ Hastings AP Physics 1

Mr. Willie Midterm Exam Review-3

Track Meterstick Set of objects of different masses

3. E. Conservation of momentum: mv = (m + M)V, or V = mv/(m + M).

 Use the electronic balance to determine the mass m of the cart.

Initial gravitational potential energy: Ug0 = mcgH + mbgh

Final gravitational potential energy: Ugf = mcgH

Initial kinetic energy: K0 = 0

Final kinetic energy: Kf = ½(mc+mb)vf 2

Acceleration is constant, so d = 1/2(vo+vf)t, where d is the distance along the track.

Initial gravitational potential energy: Ug0 = mgh

Final gravitational potential energy Ugf = 0

Initial kinetic energy K0 = 0

Final kinetic energy K0 =1/2mv2

Acceleration is constant, so d = ½(vo+vf)t

For identifying a reasonable cause for the increase in energy 1 point

For a reasonable explanation related to the cause identified 1 point

For a reasonable explanation related to the cause identified 1 point

You might also like