Antenna Specifications: Electrical Properties
Antenna Specifications: Electrical Properties
Antenna Specifications: Electrical Properties
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/4x(3300-3800)-
7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD Antenna with
7 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1 / Rr2)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable, each band separately
at mid Tilt 14.8 15.1 15.3 15.6
Gain (dBi)
over all Tilts 14.7 ±0.5 15 ±0.5 15.2 ±0.5 15.5 ±0.5
Side lobe suppression for first side
> 15 > 15 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 67 ±7 64 ±5 62 ±5 60 ±6
Vertical 3dB beam width (°) 10.8 ±0.8 9.9 ±0.7 9.5 ±0.6 8.9 ±0.6
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ±30° (dB) > 20 > 22 > 23 > 23
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18
Max. power per input (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Electrical Properties
2 x (1427 - 2690) (LTy2 / RTy4) 1695 - 2690 (CTy3)
Frequency range (MHz)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable, each band separately 2 - 12 , continuously adjustable
at mid Tilt 15.8 16.7 17 17 17.4 16.8 17.1 17.1 17.5
Gain (dBi)
over all Tilts 15.7 ±0.5 16.6 ±0.5 16.9 ±0.5 16.9 ±0.8 17.3 ±0.6 16.7 ±0.5 17 ±0.5 17 ±0.6 17.4 ±0.5
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 16 > 16 > 16 > 17 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±6 66 ±4 68 ±5 65 ±6 58 ±6 61 ±5 64 ±5 61 ±5 61 ±5
Vertical 3dB beam width (°) 8.9 ±0.5 7.2 ±0.6 6.5 ±0.6 5.6 ±0.5 5.1 ±0.5 7.2 ±0.5 6.4 ±0.5 5.7 ±0.4 5.2 ±0.4
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28 ≥ 28
Front to back ratio , ±30° (dB) > 25 > 26 > 26 > 26 > 25 > 27 > 27 > 26 > 25
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Max. power per input (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
2
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/4x(3300-3800)-
7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD Antenna with
7 Integrated RCUs - 2.0m
5G NR Electrical Properties
Frequency range (MHz) 2300 - 2690 (By1) 3300 - 3800 (p1)
Gain (dBi) / 15.3
Horizontal 3dB beam width (°) / 70
Front to back ratio (dB) / ≥ 24
Single column beam Cross polar ratio (0°) (dB) / ≥ 15
Vertical 3dB beam width (°) / 5.6
Side lobe suppression for first side lobe above main
/ ≥ 15
beam (dB)
Radiation Gain (dBi) / 20.6
parameters NR Broadcast beam Horizontal 3dB beam width (°) / 65
(PBCH/PSCH/SSCH
Front to back ratio (dB) / ≥ 25
with HUAWEI
gNodeB) Vertical 3dB beam width (°) / 5.6
Side lobe suppression for first side lobe above main
/ ≥ 15
beam (dB)
0°direct beam gain (dBi) / 20.8
0°direction beam horizontal 3dB beam width (°) / 20
NR Service beam
0°direction beam front to back ratio (dB) / ≥ 28
0°direction beam cross polar ratio (0°) (dB) / ≥ 19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the maximum
gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
55 @2300-2690
Distance between TDD columns (mm)
53 @3300-3800
(735)
Antenna dimensions (H x W x D) (mm) 2199 x 449 x 196
Packing dimensions (H x W x D) (mm) 2410 x 540 x 245
Antenna weight (kg) 47.2
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 62.0 (Included clamps)
2199
1405
3
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/4x(3300-3800)-
7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD Antenna with
7 Integrated RCUs - 2.0m
Accessories
Item Model Description Weight Units per antenna
4
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/4x(3300-3800)-
7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD Antenna with
7 Integrated RCUs - 2.0m
RET Properties
RET type Integrated RET
RET protocols AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
Power consumption (W) < 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
5
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/4x(3300-3800)-
7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD Antenna with
7 Integrated RCUs - 2.0m
HWMxxx……...Lr1
HWMxxx……LTy2
HWMxxx……CTy3
g y2 y3 y4
f HWMxxx……RTy4
HWMxxx……...Rr2
HWMxxx……..By1 y1 y1 y1 y1 p1 p1 p1 p1
g HWMxxx………p1
r1 r2
g HWXxxx……….p1
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 6 Issue: 2020-04-14