Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 216 views

    DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R: Antenna Specifications

    Uploaded by

    Александр
    This document provides specifications for the ATD4516R9 antenna model, including: - Frequency ranges of 2300-2690 MHz and 3300-3800 MHz. - Polarization, electrical downtilt, coupling factor, amplitude and phase tolerances, VSWR, power capacity, and isolation levels. - Beamforming properties including beam widths, gains, cross polarization ratios, side lobe suppression and front-to-back ratios. - Mechanical properties of antenna dimensions, weights, mast diameter supported, and wind loads. - Accessories including a downtilt kit. - Pattern samples and integrated RET specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R: Antenna Specifications

    Uploaded by

    Александр
    216 views4 pages
    This document provides specifications for the ATD4516R9 antenna model, including: - Frequency ranges of 2300-2690 MHz and 3300-3800 MHz. - Polarization, electrical downtilt, coupling factor, amplitude and phase tolerances, VSWR, power capacity, and isolation levels. - Beamforming properties including beam widths, gains, cross polarization ratios, side lobe suppression and front-to-back ratios. - Mechanical properties of antenna dimensions, weights, mast diameter supported, and wind loads. - Accessories including a downtilt kit. - Pattern samples and integrated RET specifications.

    Original Title

    ATD4516R9

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the ATD4516R9 antenna model, including: - Frequency ranges of 2300-2690 MHz and 3300-3800 MHz. - Polarization, electrical downtilt, coupling factor, amplitude and phase tolerances, VSWR, power capacity, and isolation levels. - Beamforming properties including beam widths, gains, cross polarization ratios, side lobe suppression and front-to-back ratios. - Mechanical properties of antenna dimensions, weights, mast diameter supported, and wind loads. - Accessories including a downtilt kit. - Pattern samples and integrated RET specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    216 views4 pages

    DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R: Antenna Specifications

    Uploaded by

    Александр
    This document provides specifications for the ATD4516R9 antenna model, including: - Frequency ranges of 2300-2690 MHz and 3300-3800 MHz. - Polarization, electrical downtilt, coupling factor, amplitude and phase tolerances, VSWR, power capacity, and isolation levels. - Beamforming properties including beam widths, gains, cross polarization ratios, side lobe suppression and front-to-back ratios. - Mechanical properties of antenna dimensions, weights, mast diameter supported, and wind loads. - Accessories including a downtilt kit. - Pattern samples and integrated RET specifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R

    Model: ATD4516R9

    Antenna Specifications
    General Electrical Properties
    Frequency range (MHz) 2300 - 2690 3300 - 3800

    General Polarization +45° , -45° +45° , -45°


    parameters Electrical downtilt (°) 2 - 12, continuously adjustable 2 - 12, continuously adjustable
    Grounding DC Ground DC Ground
    Coupling factor between calibration port and each
    -26 ±2 -26 ±2
    antenna port (dB)
    Max. amplitude tolerance from calibration port to
    0.7 0.9
    input ports (dB)

    Calibration and Max. phase tolerance from calibration port to input 5 7


    electrical ports (°)
    parameters
    Ports VSWR 1.5 1.5
    Avg. power capacity (W) 25 25
    Co-polarization isolation between ports (dB) ≥ 20 ≥ 20
    Cross-polarization isolation between ports (dB) ≥ 23 ≥ 23

    Beamforming Electrical Properties


    Frequency range (MHz) 2300 - 2690 3300 - 3800
    Horizontal 3dB beam width (°) 90 75
    Gain (dBi) 16 16.5
    Vertical 3dB beam width (°) 5.8 5.2
    Single
    column beam Cross polar ratio (0°) (dB) ≥ 19 ≥ 17
    Side lobe suppression for first side
    ≥ 15 ≥ 15
    lobe above main beam (dB)
    Front to back ratio (dB) ≥ 25 ≥ 25
    Horizontal 3dB beam width (°) 65 65
    Gain (dBi) 17.5 17.5
    Gain roll-off at sector edge (dB) 12 12
    Radiation 65°
    Vertical 3dB beam width (°) 5.8 5.2
    parameters Broadcast
    beam Cross polar ratio (0°) (dB) 17 19
    Front to back ratio (dB) ≥ 28 ≥ 25
    Side lobe suppression for first side
    ≥ 15 ≥ 15
    lobe above main beam (dB)
    0° direct beam gain (dBi) 21.5 21
    0° direction beam horizontal 3dB
    23 24
    beam width (°)
    0° direction beam horizontal side
    Service 12 12
    lobe suppression (dB)
    beam
    0° direction beam cross polar ratio
    22 19
    (0°) (dB)
    0° direction beam front to back ratio
    ≥ 30 ≥ 30
    (dB)

    1
    DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R
    Model: ATD4516R9

    Soft Split Electrical Properties


    Frequency range (MHz) 2300 - 2690
    Horizontal 3dB beam width (°) 28
    Gain (dBi) 20.5
    Radiation
    parameters Vertical 3dB beam width (°) 5.8
    Multi-beam
    Front to back ratio (dB) ≥ 30
    Side lobe suppression for first side
    ≥15
    lobe above main beam (dB)

    Notes：
    65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
    site requirements and auxiliary equipment conditions.

    Mechanical Properties
    Distance between columns (mm) 43 / 62
    106
    Antenna dimensions (H x W x D) (mm) 1499 x 469 x 206
    Packing dimensions (H x W x D) (mm) 1870 x 535 x 285
    Antenna weight (kg) 31.5
    Clamps weight (kg) 5.8 (2 units)
    Antenna packing weight (kg) 49.0 (Included clamps)
    Mast diameter supported (mm) 50 - 115
    Radome material Fiberglass

    1499
    1383
    Radome colour Light grey
    Operational temperature (℃) -40 .. +65
    Frontal: 700 (at 150 km/h)
    Wind load (N) Lateral: 195 (at 150 km/h)
    Rear side: 670 (at 150 km/h)
    Max. operational wind speed (km/h) 200
    Survival wind speed (km/h) 250
    Connector 18 x N Female
    Connector position Bottom

    Accessories

    Item Model Description Weight Units per antenna

    Downtilt kit ASMDT0F01 Mechanical downtilt: 0 - 16° 3.1 kg 1 (Separate packing)

    RET S/N: RAE S/N:


    HWMxxx….y1 HWXxxx…..y1
    HWMxxx….y2 HWXxxx…..y2

    y - Yellow

    2
    DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R
    Model: ATD4516R9

    Pattern sample for reference

    Single column Single column


    (2300 - 2690) (3300 - 3800)

    65° Broadcast 65° Broadcast


    (2300 - 2690) (3300 - 3800)

    Service 0° Service 0°
    (2300 - 2690) (3300 - 3800)

    Multi-Beam-30° Multi-Beam+30°
    (2300 - 2690) (2300 - 2690)

    3
    DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R
    Model: ATD4516R9

    Antenna Information Management Module (AIMM) Specifications

    RET Properties
    RET type Integrated RET
    RET protocols AISG 2.0 / 3GPP
    Input voltage range (V) 10 - 30 DC
    < 1 (when the motor does not work, 12 V)
    Power consumption (W) < 3 (when the motor is working, 12 V)
    < 10 (when the motor is starting up or shutting down, 12 V)
    Adjustment time (full range) (s) Typ. 30
    2 x 8 pin connector according to IEC 60130-9
    Connectors
    Daisy chain in: Male / Daisy chain out: Female
    1 2 3 4 5 6 7 8
    Pin assignment according AISG
    DC n/c RS-485B n/c RS-485A DC DC return n/c
    Lightning protection (kA) 5 (8/20 μs)

    RAE Properties
    RAE type Integrated RAE
    RAE protocols AISG-ES-RAE V2.1.0

    EasyBeam Properties
    Frequency range (MHz) 2300 - 2690 3300 - 3800
    Electrical downtilt (°) 2 - 12 2 - 12
    Horizontal 3dB beam width (°) 30 65 90 30 65 90
    Broadcast
    Electrical azimuth (°) -15..+15 0 -15..+15 0
    beam
    Electrical azimuth step(°) 1 / 1 /

    Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
    EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
    Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

    NOTE
    1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
    2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
    3. The antenna working environment must meet the requirements specified in the datasheet.
    4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
    requirements described in the antenna installation guide.

    Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
    Any previous datasheet issues become invalid. 4 Issue: 2018-03-07

    You might also like