Base Station Antenna

HXTR12X22HHHH1617065T2C
12-Ports FDD: 2x690–960MHz; TDD: 2300-2690MHz
2x65°(FDD)/ 65°(TDD) 2x16/ 18dBi 2.1m
E-Tilt: 2-12/2-12/2-12, Integrated RCU
Electrical Specifications(TDD)
Frequency range(MHz) 2300-2690
General
Electrical downtilt(°) 2-12
Parameter
Electrical downtilt tolerance (°) ±1.5
Coupling Factor between calibration port and each antenna port(dB) -26±2
Max. amplitude tolerance from calibration port to input ports (dB) ≤0.9
Max.phase tolerance from calibration port to input ports (°) ≤7
Ports VSWR ≤1.5
Calibration
and electrical 2° ≥20
Co-polarization isolation
parameter 3°~6° ≥22
between ports (dB)
7°~12° ≥22
2° ≥22
Cross-polarization isolation
3°~6° ≥22
between ports (dB)
7°~12° ≥22
Horizontal 3dB beam width(°) 70±10
Gain (dBi) 16.7±0.5
Cross polar ratio(0°)(dB) ≥15
Single column pattern
Front to back ratio(dB) ≥25
Vertical sidelobe suppression for first
≥15
sidelobe above main beam（dB）
Gain (dBi) 18.0±0.5
Horizontal 3dB beam width(°) 65±5
Radiation
Vertical 3dB beam width(°) 6±0.5
parameters Broadcasting beam
Front to back ratio(dB) ≥26
Vertical sidelobe suppression for first
≥15
sidelobe above main beam（dB）
0°direct beam gain(dBi) 21±0.8
0°direct beam horizontal 3dB beam width
≤24
Service beam (°)
0°direct beam cross polar ratio(axial) (dB) ≥18
0°direct beam front to back ratio(dB) ≥28
Values based on NGMN recommendations on base station antenna Standards(BASTA).

Electrical Specifications(FDD)
690 – 960(R1,R2)
Frequency Range(MHz)
General 690-880 894-960
parameters Polarization ±45 ±45
Electrical Downtilt() 2-12 2-12
Base Station Antenna
Electrical downtilt tolerance (°) ±1.5 ±1.5
Avg. power per input (W) 500 500
Electrical Intermodulation IM3 (dBc,@2*43dBm) ≤-150 ≤-150
parameters VSWR ≤1.5 ≤1.5
Isolation（dB） 25 25
Horizontal 3dB Beam Width () 65±5 65±5
Vertical 3dB Beam Width() 9±0.8 7.8±0.8
Gain (dBi) 16.0±0.5 16.5±0.5
Radiation
Cross polar ratio (dB, 0) 15 15
parameters
Front to Back Ratio 180°±30° ( dB) 28 28
Vertical sidelobe suppression for first
16 16
sidelobe above main beam（dB）
Values based on NGMN recommendations on base station antenna Standards(BASTA).

Mechanical Specifications
Lightning Protection DC Ground
RF Connector 8×4.3-10 + 4×4.3-10, Female, Bottom
Cal Connector 1×N, Female, Bottom
Remote Electrical Tilt (RET) Integrated, AISG 2.0
Antenna dimensions (H x W x D) (mm) 2100×448×188
Packing dimensions (H x W x D) (mm) 2390×560×325
Weight of antenna 40Kg
Weight of Clamps 5.6Kg
Diameter of installation pole φ50 ~φ110 mm
Tilt Bracket 0°~12°
Radome material Fiberglass
Radome color Light grey
Operational temperature (℃) -40~+60
Wind load at (N) 42m/s 1125/348/1218(Front/Lateral/Rear)
Max. wind speed (km/h) 200
Base Station Antenna
Special Information
Remote Electrical Tilt (RET) Integrated, AISG 2.0

Layout and Pattern

Connector Position： Configuration Types:

RET S/N：
HXSxx-R1-xx……；
HXSxx-R2-xx……；
R1/R2: 690 – 960MHz
HXSxx-Y1-xx……；
Y1: 2300-2690 MHz(TDD)

Pattern sample for reference：

690-960MHz 2300-2690MHz
Horizontal & Vertical Horizontal & Vertical