Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 71 views

    Tracvision Tv8 Installation Checklist: Required To Validate Your Installation

    Uploaded by

    Delightful Estate
    dstv

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tracvision Tv8 Installation Checklist: Required To Validate Your Installation

    Uploaded by

    Delightful Estate
    71 views3 pages
    dstv

    Original Title

    500173 C TV8 Install Checklist

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    dstv

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    71 views3 pages

    Tracvision Tv8 Installation Checklist: Required To Validate Your Installation

    Uploaded by

    Delightful Estate
    dstv

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    TracVision TV8 Installation Checklist

    Required to validate your installation

    Owner Information
    Vessel Name: ___________________________________ Customer Name:____________________________________

    Antenna Serial Number:____________________________ TV-Hub Serial Number:_______________________________

    Owner Address:____________________________________________________________________________________

    City:____________________ State/Province and Country:____________________ Postal/Zip Code:__________________

    Phone Number: __________________________________ Email:_____________________________________________

    Installer Information
    Installation Date:_________________________________
    MM/DD/YYYY

    Installing Technician:______________________________ Installing Company:__________________________________

    Installing Company Address:__________________________________________________________________________

    City:____________________ State/Province and Country:____________________ Postal/Zip Code:__________________

    Phone Number: __________________________________ Email:____________________________________________

    Installation Quality Check


    Requirement P
    Antenna Unit
    The antenna is mounted in a blockage-free area, with a clear view of the sky (360°), to the best extent possible.

    Location description: _____________________________________________________________________


    Take digital photos of the antenna installation from all directions. Send these photos to KVH with this form.
    The antenna is mounted away from the vessel's superstructure and any other antennas.
    The antenna is mounted outside the radar beam path and at least 3 ft (1 m) away from radar and high-power radio
    transmitters. The antenna is mounted above or below the radar's elevation range (generally -15° to +15°).
    The antenna is mounted on a flat, level surface/pedestal capable of supporting the antenna’s weight under all
    environmental conditions, and rigid enough to prevent vibration. The location provides enough free space for
    hatch access.
    The cable access hole is sealed with silicone sealant (or equivalent) to protect against leakage. (If using the
    Bottom Cable Entry Kit, the underside of the antenna is sealed using the cover plate and gasket, and rubber seal.)
    The "Forward" arrow inside the baseplate is pointing towards the bow and is parallel to the vessel's centerline.
    The shipping restraints have been removed and saved in the Welcome Kit for future use.
    Anti-seize lubricant was applied to all four mounting bolts, and plastic screw caps installed over radome screws.
    continued on reverse

    The four mounting bolts have been tightened to between 10.3 and 12.6 ft-lbs (14.0 and 17.1 N-m) of torque so
    that the four rubber feet are bottomed against the mounting surface.

    ©2015-2016 KVH Industries, Inc. KVH and TracVision are trademarks of KVH Industries, Inc. 50-0173 Rev. C
    TracVision TV8 Installation Checklist
    Requirement P
    TV-Hub
    The TV-Hub is installed in a cool, dry location that provides good ventilation.

    Location description: _____________________________________________________________________


    The TV-Hub is installed in a cool, dry location that provides good ventilation.

    Location description: _____________________________________________________________________


    If possible, the TV-Hub LED lights are visible to the user.
    The TV-Hub is in a location that provides good Wi-Fi reception and/or close to an available port on the vessel
    LAN.
    Wiring
    The supplied 75W RG-11 cable was used to connect the antenna (RF1) to the TV-Hub.
    All RF cabling required by the system configuration was terminated at both ends with the correct “F” connectors
    using proper tools, exactly to the manufacturer's specifications. Enter information for any other RF cables used:
    Cable length: _____________ Cable type used: _______________ Connectors used: _________________
    The RF cable connection(s) above deck are protected against water and corrosion using DOW Corning #4
    silicone grease (inside the connectors) and silicone sealant or equivalent (outside the connectors).
    RF cables are strain-relieved, protected from abrasion, and free of stress. A minimum 4.5" (11.5 cm) bend radius
    is maintained throughout, and 8" (20 cm) service loops are present where appropriate.
    RF cable connection was tightened to 20 inch-pounds of torque at the antenna, and to 15 inch-pounds of torque
    at the TV-Hub.
    All wiring conforms to the system wiring diagrams provided in the Installation Guide (and all cables are free
    of stress, twists, and kinks (minimum bend radius is maintained throughout), neatly arranged, protected from
    abrasion, and labeled at both ends, as necessary, to identify them easily.
    Configuration
    For automatic satellite switching, the DIRECTV receivers or IP AutoSwitch(es) for Linear, DISH Network, or Bell
    TV, are connected to the same subnet as the TV-Hub. Record automatic switching information below and enter
    this information in the Setup Wizard or Autoswitch page of the web interface.
    Note: Name = Descriptive name for receiver location, for example, "Salon"

    DIRECTV
    Name IP Address Name IP Address

    DISH/Bell/Linear
    continued on next page

    Name IP AutoSwitch Serial No. Name IP AutoSwitch Serial No.


    TracVision TV8 Installation Checklist
    Requirement P
    Configuration (Continued)
    The latest versions of system software and satellite library are installed.
    Ran through the entire TracVision Setup Wizard to set up the system for location, service, and satellites.
    Wi-Fi devices connect to the TV-Hub via http://tvhub.kvh in browser; WPA-PSK security mode selected and
    password set. TV-Hub Wi-Fi password: __________________
    The TV-Hub is connected to the vessel's network (DHCP or static IP) as needed (such as for automatic satellite
    switching and/or access to web interface from a device on the network). Static IP (if used): ________________
    Antenna settings addressed, for example, advanced modes; NMEA 0183 configured to 4800 baud.
    Setup required for the specific receivers (DIRECTV, DISH/Bell, and Linear) complete and satellites selected.
    Power and Grounding
    The TV-Hub is hard-wired to a 12 VDC or 24 VDC, 120 W power source, and the TV-Hub is receiving 10-30 VDC
    power at its input.
    Power supply brand/model: _______________ ____________ Specs (voltage/amperage): _______________
    The supplied ground wire is connected from the ground point on the TV-Hub to the vessel's ground.
    Using a multimeter, measure and record the DC voltage between the ground point on the TV-Hub and the
    vessel's ground. The measured voltage should be < 2V. Measured: ___________________________________
    Using a multimeter, measure and record the AC voltage between the ground point on the TV-Hub and the
    vessel's ground. The measured voltage should be < 2V. Measured: ___________________________________
    Testing and Handover to Customer
    During startup, all system indicators on the TV-Hub front panel and web interface showed normal status.
    Customer educated on: receiver/service activation, system operation, satellite blockage, and product registration.
    The Welcome Kit, containing the Installation Guide and Quick Start Guide, was provided to the customer, and the
    customer knows how to find additional information in the Help.
    Verified that you can watch TV (requires receiver activation). Service: DIRECTV DISH Network
    Special Circumstances
    Report any problem or irregularity noted during installation and verification.

    Customer Acceptance
    Signature of Installer: ___________________________________________________ Date:_______________________
    MM/DD/YYYY
    Signature of Owner/Ship's Master: _________________________________________ Date:_______________________
    MM/DD/YYYY
    Signature of Ship's Electrician (if applicable): _________________________________ Date:_______________________
    MM/DD/YYYY

    Please email this form and antenna installation photos with a subject line of "installation report" to
    KVH Technical Support, Email: support@kvh.com

    You might also like