Epas 9 Summative Test Week 1 and 2
Epas 9 Summative Test Week 1 and 2
Epas 9 Summative Test Week 1 and 2
Department of Education
REGION VII- CENTRAL VISAYAS
DIVISION OF BOHOL
ALICIA DISTRICT
Directions: Multiple Choice. Read the questions carefully. Encircle the letter of your answer.
a. 209 Ω c. 241 Ω
b. 231 Ω d. 251 Ω
12. What is the minimum deviation of the resistor stated in number 11?
a. 209 Ω c. 241 Ω
b. 231 Ω d. 251 Ω
13. What does VOM stands for?
a. Voltage, Ohms, Meter c. Volt, Ohmmeter, Meter
b. Voltmeter, Odometer, Milliammeter d. Voltmeter, Ohmmeter, Milliammeter
14. What are the colors representing positive and negative of the test probes?
a. Blue and Red c. Blue and Black
b. Red and Black d. Yellow and blue
15. A semiconductor device with three electrodes which can function as an electronic switch, rectifier,
amplifier or oscillator.
a. Transistor c. Triac
b. Transformer d. Thermistor
16. This refers to the input side of the transformer where the main power source is connected.
a. Bobbin c. Primary winding
b. Core d. Secondary winding
17. Give the capacitance value of the mylar capacitor with the code: 104 J
a. .1 µF c. .001 µF
b. .01 µF d. .0001 µF
18. More convenient and easy to operate because it shows the exact value that you will need.
a. Analog Multitester c. Clamp Ammeter
b. Digital Multitester d. Voltmeter
19. Resistors which obey Ohms Law.
a. Linear resistors c. Light Dependent Resistor
b. Non-linear resistors d. Thermistor
20. Below are the internal parts of an analog multitester EXCEPT
a. Pointer, range selector, zero corrector adjustment screw, AC volt range
b. 9-volt battery, protection fuse, “AA” size battery, diode protection
c. Test probes, positive jack, DC ampere range, scale
d. DC volt range, zero ohm adjustment, name plate, common jack
ANSWER KEY:
1. A
2. A
3. B
4. C
5. A
6. C
7. A
8. D
9. C
10. B
11. B
12. A
13. D
14. B
15. A
16. C
17. A
18. B
19. A
20. B