DVJX 1

ORDER NO.
RRV2878
DVJ-X1
DVD PLAYER
DVJ-X1
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power Requirement Region No. Remarks
DVJ-X1 KUC AC120V 1
For details, refer to "Important symbols for good services"
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
T-ZZR JUNE 2004 printed in Japan
Downloaded from www.Manualslib.com manuals search engine

1 2 3 4
SAFETY INFORMATION
This service manual is intended for qualified service technicians ; it is not meant for the casual do-it-
yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained
to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of Californiat o cause
cancer, birth defects or other reproductive harm.
B Health & Safety Code Section 25249.6 – Proposition 65
NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement par ts must
be of identical designation.
REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que les pièces
de remplacement doivent avoir la même désignation.
C
(FOR USA MODEL ONLY)
1. SAFETY PRECAUTIONS ANY MEASUREMENTS NOT WITHIN THE LIMITS

OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL
The following check should be performed for the
continued protection of the customer and ser vice SHOCK HAZARD AND MUST BE CORRECTED BEFORE
technician. RETURNING THE APPLIANCE TO THE CUSTOMER.
LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground (water 2. PRODUCT SAFETY NOTICE
pipe, conduit, etc.) by connecting a leakage current tester Many electrical and mechanical parts in the appliance
D such as Simpson Model 229-2 or equivalent between the have special safety related characteristics. These are
earth ground and all exposed metal parts of the appliance often not evident from visual inspection nor the protection
(input/output terminals, screwheads, metal overlays, control afforded by them necessarily can be obtained by using
shaft, etc.). Plug the AC line cord of the appliance directly replacement components rated for voltage, wattage, etc.
into a 120V AC 60Hz outlet and turn the AC power switch Replacement parts which have these special safety
on. Any current measured must not exceed 0.5mA. characteristics are identified in this Service Manual.
Electrical components having such features are identified
by marking with a on the schematics and on the parts list
Reading should in this Service Manual.
Leakage not be above The use of a substitute replacement component which does
Device current 0.5mA
tester not have the same safety characteristics as the PIONEER
E under
test recommended replacement one, shown in the parts list in
Test all this Service Manual, may create shock, fire, or other hazards.
exposed metal Product Safety is continuously under review and new
surfaces
instructions are issued from time to time. For the latest
information, always consult the current PIONEER Service
Manual. A subscription to, or additional copies of, PIONEER
Also test with
plug reversed Earth Service Manual may be obtained at a nominal charge from
(Using AC adapter ground PIONEER.
plug as required)
AC Leakage Test
F
2 DVJ-X1
1 2 3 4
5 6 7 8
[ Important symbols for good services ]

In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them: A
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.
3. Cleaning
B
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.
4. Shipping mode and shipping screws

To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
5. Lubricants, glues, and replacement parts

Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used. C
DVJ-X1 3
5 6 7 8
1 2 3 4
CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
A
2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6
2.1 PACKING ................................................................................................................................................... 6
2.2 EXTERIOR SECTION................................................................................................................................ 8
2.3 BOTTOM SECTION ................................................................................................................................. 10
2.4 CONTROL PANEL SECTION .................................................................................................................. 12
2.5 JOG SECTION......................................................................................................................................... 14
2.6 SLOT-IN MECHANISM SECTION............................................................................................................ 16
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 18
3.1 BLOCK DIAGRAM (1/2)........................................................................................................................... 18
3.2 BLOCK DIAGRAM (2/2)........................................................................................................................... 20
3.3 OVERALL WIRING DIAGRAM................................................................................................................. 22
3.4 MAIN ASSY (1/10) ................................................................................................................................... 24
B 3.5 MAIN ASSY (2/10) ................................................................................................................................... 26
3.6 MAIN ASSY (3/10) ................................................................................................................................... 28
3.7 MAIN ASSY (4/10) ................................................................................................................................... 30
3.8 MAIN ASSY (5/10) ................................................................................................................................... 32
3.9 MAIN ASSY (6/10) ................................................................................................................................... 34
3.10 MAIN ASSY (7/10) ................................................................................................................................. 36
3.11 MAIN ASSY (8/10) ................................................................................................................................. 38
3.12 MAIN ASSY (9/10) ................................................................................................................................. 40
3.13 MAIN ASSY (10/10) ............................................................................................................................... 42
3.14 DVPL ASSY ........................................................................................................................................... 44
3.15 STCN, SPCN, SDCB and INSW ASSYS ............................................................................................... 46
3.16 DIPB and RSWB ASSYS ....................................................................................................................... 48
C 3.17 SLDB, LED1, LED2, CMPB, MFLB and PSWB ASSYS ........................................................................ 50
3.18 JFLB and JOGB ASSYS ........................................................................................................................ 52
3.19 MJCB and DOUT ASSYS ...................................................................................................................... 54
3.20 KSWB, SLMB and EJTB ASSYS ........................................................................................................... 56
3.21 SW POWER SUPPLY ASSY.................................................................................................................. 58
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 67
4.1 MAIN ASSY ............................................................................................................................................. 68
4.2 DVPL ASSY ............................................................................................................................................. 72
4.3 SPCN, STCN, INSW, SLMB and SDCB ASSYS ..................................................................................... 74
4.4 DIPB, SLDB, RSWB, LED1 and LED2 ASSYS........................................................................................ 76
4.5 MFLB, KSWB and EJTB ASSYS ............................................................................................................. 80
4.6 JFLB and JOGB ASSYS .......................................................................................................................... 84
D
4.7 CMPB, MJCB and DOUT ASSYS............................................................................................................ 86
4.8 PSWB and SW POWER SUPPLY ASSYS............................................................................................... 88
5. PCB PARTS LIST ........................................................................................................................................... 90
6. ADJUSTMENT ............................................................................................................................................... 97
6.1 SLDB ZERO POINT ADJUSTMENT........................................................................................................ 97
7. GENERAL INFORMATION ............................................................................................................................. 99
7.1 DIAGNOSIS ............................................................................................................................................. 99
7.1.1 SERVICE MODE ............................................................................................................................... 99
7.1.2 POWER ON SEQUENCE................................................................................................................ 107
7.1.3 DVJ-X1 BLOCK CHART(DJ MODE) ............................................................................................... 110
7.1.4 DVJ-X1 BLOCK CHART(NORMAL MODE) .................................................................................... 112
E 7.1.5 DISASSEMBLY................................................................................................................................ 114
7.1.6 On Discharge of the Capacitor ........................................................................................................ 120
7.1.7 CLEANING ...................................................................................................................................... 120
7.2 PARTS.................................................................................................................................................... 121
7.2.1 IC ..................................................................................................................................................... 121
8. PANEL FACILITIES ...................................................................................................................................... 132
4 DVJ-X1
1 2 3 4
5 6 7 8
1. SPECIFICATIONS
Specifications
1. General
Type of Unit ........................................................ DVD video, CD 4. Audio output section
Power .......................................................... AC 120 V, 50/60 Hz Audio output (2-channel)
Power consumption .......................................................... 47 W Audio output level ............................. 2.0 V rms (1 kHz, 0 dB)
Operating environment temperature Channels .............................................................................. 2
.......................................... +5 °C – +35 °C (+41 °F – +95 °F) Output connectors .................................................. RCA type
Operating environment humidity Digital audio output response
......................................... 5-85% (RH) without condensation Frequency response (CD) ................................. 4 Hz - 20 kHz
Weight ................................................................ 7.3 kg (16.1 lb) Frequency response (DVD [96 kHz] ) ................ 4 Hz - 44 kHz B
External dimensions ................ 348 (W) x 451 (D) x 128 (H) mm S/N ratio ........................................... 115 dB or above (JEITA)
13-11/16 (W) x 17-3/4 (D) x 5-1/6 (H) in Total harmonic distortion .............................. 0.006% (JEITA)
Digital output
2. Video output section Coaxial digital output ..................................... RCA connector
Composite output (2)
Output level ...................................................... 1 Vp-p (75Ω ) 5. Other connectors
Output connector sets ................................ RCA (1), BNC (1) Control connector ............................................... Minijack (3.5 ø)
S- video output Sync input connector .................................................. BNC type
Y output level .................................................... 1 Vp-p (75Ω )
C output level ............................................ 286m Vp-p (75Ω ) 6. Accessories
Output connector ........................................................ S type SD memory card .................................................................. 1
Component video output (Y, CB/PB, CR/PR) Audio cable .......................................................................... 1 C
Y output level .................................................... 1 Vp-p (75Ω ) Video cable .......................................................................... 1
CB/PB, CR/PR ................................................... 0.7 Vp-p (75Ω ) Control cord ......................................................................... 1
Output connector ................................................... BNC type Power cord .......................................................................... 1
Forcible eject pin (mounted on unit’s bottom panel) ........... 1
3. Preview video output section Operating Instructions ......................................................... 1
Composite output Warranty card ...................................................................... 1
Output level ...................................................... 1 Vp-p (75Ω )
Output connector ................................................... RCA type All specifications and descriptions are subject to change without
S- video output notice.
Y output level .................................................... 1 Vp-p (75Ω )
C output level ............................................ 286 mVp-p (75Ω )
Output connector ........................................................ S type
D
Accessories
Audio Cable Video Cable Forced Eject Pin

(VDE1064) L=1.5m (VDE1065) L=1.5m (DEX1013)
E
Control Cord Power Cord SD Memory Card

(PDE-319) L=1 m (KUC type : ADG7021) (DWX2369)
DVJ-X1 5
5 6 7 8
1 2 3 4
2. EXPLODED VIEWS AND PARTS LIST

NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
A Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
2.1 PACKING
17
13
5 10
C
14
4
2 16
15
E
12
6 DVJ-X1
1 2 3 4
5 6 7 8
PACKING Parts List
Mark No. Description Part No.
> 1 Power Cord ADG7021
2 Control Cord (L= 1m) PDE-319 A
3 Audio Cable (L= 1.5m) VDE1064
4 Video Cable (L=1.5m) VDE1065
NSP 5 Warranty Card ARY7043
6 •••••
7 •••••
8 Forced Eject Pin DEX1013
9 Operating Instructions(English) DRB1358
NSP 10 Polyethylene Bag VHL-014
(230 x 340 x 0.05)
B
11 •••••
12 Pad (A) DHA1596
13 Pad (B) DHA1597
14 Pad (C) DHA1598
15 Packing Case DHG2425
16 Mirror mat Sheet VHL1012

17 SD Memory Card DWX2369
DVJ-X1 7
5 6 7 8
1 2 3 4
2.2 EXTERIOR SECTION
NON-CONTACT
Lubricating oil
CONTACT SIDE
A ∗1 : GYA1001
43 Refer to
SIDE
43
"2.4 CONTROL PANEL SECTION".
10
50
8
B
44
48
12 31
D
13
C 52
Refer to
"2.6 SLOT-IN MECHANISM SECTION".
14 7 44
45
15 3 T 47
45
16 C 51
46
B 45 44 47 32
16 D
15 15 33
16
45 44
D
16 35 44
15
44
44
49
30 5
44 29 2 36
27 34
17 ∗1 E
∗1 44
A 28
E ∗1 37
18 36
24 26 A
∗1
19
44 ∗1 F
C
22 25
B 23
43 F
21
6 40
39 E
43 42
38
B
20 44
F E
44 Refer to
44 4 44
1 "2.3 BOTTOM SECTION".
8 DVJ-X1
1 2 3 4
5 6 7 8
EXTERIOR SECTION Parts List
Mark No. Description Part No. Mark No. Description Part No.
1 DVPL Assy DWX2341 52 Plastic Rivet DEC1704
2 SDCB Assy DWX2344 A
3 SLMB Assy DWS1344
4 40P Flexible Cable/60V DDD1252
6 Connector Assy PF04EE-D40

7 Connector Assy PF03PP-B30
NSP 8 Earth Plate (CU) DNE2587
9 Gascket 9 x 3L40 DEC2688
11 Sheet C DEC2695
B
12 Earth Lead Unit/300V DDF1010
13 Mechanism Holder Plate DNH2339
14 Earth Spring DBH1398
15 Float Spring (G11) DBH1526
16 Damper CNV6011
17 Mechanism Base DNK4240
18 Driver Heatsink Plate DNH2586
NSP 19 Silicone Rubber D5L DEB1456
20 Card Flap DNK3998
21 Eject Arm DNH2617 C

22 Card Ejector DNK4241
23 Eject Lever DNK3999
24 Lever Spring DBH1498
25 Carriage Spring DBH1497
26 Flap Spring DBH1499

27 Base Holder DNK3996
28 Carriage Base DNK3997
29 Hook Spring DBH1496
30 Lock Hook Assy DXB1764
D
31 Insulation Sheet DEC2616
32 EMI Sheet A DEC2672
NSP 33 Front Plate DNH2590
NSP 34 Shield Plate DNH2591
36 Lead Tape R4 DEB1529

37 Cord Clamper RNH-184
40 13P Flexible Cable/60V DDD1256 E
41 •••••
42 Screw PBA1062
43 Screw BBZ30P120FMC
44 Screw BPZ30P080FZK
45 Screw BPZ30P140FMC
47 Screw BBZ30P080FNI
48 EMI Sheet B DEC2673
49 Sheet B DEC2693 F
50 Sheet C DEC2695
51 Front Cover DEC2678
DVJ-X1 9
5 6 7 8
1 2 3 4
2.3 BOTTOM SECTION
11 DIPB to
DVPL to G CN2002
NON-CONTACT
CONTACT SIDE
B CN2006
A 24
24 B 5
N 30
C
7
3
SIDE
23
29 R
24 25
24
V D
13 12 25
25 25
Q
6 26 25
24 24
B
24
A
25
8 4 24
24 26
24
24 15
21 24
13
24
21 24
14
D
16
C 9 L
2
17
24
B DVPL to
CN2007
D SDCB to
E 27
18 CN2002
A B 10
17 28 26 C
24 26
26
E 1
20
24 24
19 24
24
24 31
26
26
26 26
F
10 DVJ-X1
1 2 3 4
5 6 7 8
BOTTOM SECTION Parts List
> 1 MAIN Assy DWG1570
2 CMPB Assy DWG1577 A
3 PSWB Assy DWS1345
4 MJCB Assy DWG1573
5 DOUT Assy DWG1574
> 6 SW POWER SUPPLY Assy DWR1378

7 30P Flexible Cable DDD1248
10 Connector Assy PF10PP-D12
11 Power Knob DNK4238 B

12 Heatsink DNG1088
13 Rear Protector DNK4242
14 Rear Panel (KUC) DNC1668
15 Rear Stay DNH2603
NSP 16 Chassis DNK4239

17 Insulator DNK4248
18 Heatsink Plate Assy DXB1803
19 Sheet DEC2694
20 Bottom Case Assy (KUC) DXB1794
C
21 Cord Clamper RNH-184
22 •••••
30 4P Flexible Cable PF04EE-D040
D
31 Sheet DEC2691
DVJ-X1 11
5 6 7 8
1 2 3 4
2.4 CONTROL PANEL SECTION
NON-CONTACT
CONTACT SIDE
A
19 13
SIDE
57
17
12
14
20
18 15
16
21
8
U
56
22
56
23
C M
6
22 56
56
24
D 25
5 K H 26
40 26
B
2
A 27
41 28
56 30 32 Refer to
43 "2.5 JOG SECTION".
29 31 33 35
34
36
45 56 34
44 29
42 37
44
56 38 54
E 46 52
39
B 56
53
47 56 56
50 51 G 56
D
S C I 56 1
56
56 A 56 11 56
7
C 55
56
48 J 56 56
56
56 4
3 11
10 9
F 56 56 Q MJCB to
CN4503
49 56 56
56 D
12 DVJ-X1
1 2 3 4
5 6 7 8
CONTROL PANEL SECTION Parts List
1 DIPB Assy DWG1575 51 LED Lens DNK4255
2 RSWB Assy DWS1346 52 Cross Key Holder DNK4262
A
3 SLDB Assy DWS1347 53 VR Stay DNF1663
4 LED 1 Assy DWG1578 54 Flange Nut M9 DBN1004
5 LED 2 Assy DWG1579 55 Cord Clamper (steel) RNH-184
6 MFLB Assy DWG1576 56 Screw BPZ30P080FZK

7 KSWB Assy DWS1343 57 Control Panel Assy-S DXX2548
8 EJTB Assy DWS1348

B
12 Main FL Filter (PC) DEC2609
13 Display Panel (PMMA) DAH2265
14 Top Panel (ABS) DNK4246
15 SW Knob B DAC2012
16 Eject Knob DAC2170

17 Rotary Knob DAA1163
18 Slide Knob DNK2936
19 JOG Ring DNB1130
20 Top Panel (AL) DNB1127
21 Slide VR Packin DED1172 C

22 Earth coil Spring DBH1527
23 Control Panel Assy DXB1801
24 Card Lens DNK4254
25 Set Knob 1 DAC2161

29 Tempo Lens DNK4256
30 Set Knob (H.C) DAC2155
D
31 REC Knob DAC2158
32 Set Knob (Loop) DAC2166
33 Reloop Knob DAC2167
34 Ennter Knob DAC2169
35 CALL Knob DAC2168
36 Sheet 1 DED1169
37 Cross Key 2 DAC2171
38 Change Knob DAC2172
39 Set Knob (TEMPO) DAC2160
40 Reinforcement Plate DNH2602 E
41 Reflector DNK4249
42 Front Lens DNK4251
43 Ring Lens (SEARCH) DNK4253
44 Sheet 2 DED1170
45 Ring Lens DNK4252
46 Set Knob (SEARCH) DAC2157

47 Set Knob (PLAY) Assy DXB1799
48 Card Stopper DNK4250
49 Earth Plate (CU) DBK1224 F
50 Reset knob DAC2159
DVJ-X1 13
5 6 7 8
1 2 3 4
2.5 JOG SECTION
NON-CONTACT
Lubricating oil
CONTACT SIDE
A ∗1 : GYA1001
SIDE
5
B 27
27
27 12
8
13 11
13
14 14 28
C
9 3 14 13 ∗1 15
28
∗1
14
16 12
D 10
∗1 ∗1
27
27
12
Note :
Be careful so that lubricating oil
does not adhere to rubber section
27 27 17 of the roller.
27 18
27
27
32
19 4 G DIPB to
CN3003
20
E 1
∗1 28
P O 26
2 23
21 28
31 22
24
25
29
F
14 DVJ-X1
1 2 3 4
5 6 7 8
JOG SECTION Parts List
1 JFLB Assy DWG1571
2 JOGB Assy DWG1572 A
3 Sheet SW DSX1060
4 Connector Assy PF04PP-B07
5 Jog Panel (PMMA) DAH2264
6 JOG FL Filter (PC) DEC2608

7 JOG Plate DNB1126
8 JOG A DNK4243
9 JOG B DNK4244
10 JOG C DNK4174
11 SW Ring DNK4070
B
12 Roller A Assy DXB1825
13 SW Spring 31 DBH1528
14 SW Cushion HH48/2 DEC2538
15 JOG Stay Assy DXB1780
16 JOG Holder 2 DNK4175

17 Spacer DEC2554
18 Arm Spring DBH1503
19 Deceleration Gear DNK4066
20 ENC Plate DEC2498
21 Gear Arm DNK4065 C

22 Gear DNK4176
23 Smoother DNK4177
24 Adjust Plate DNK4178
25 Gear Spring 200 DBH1525
26 Washer WA42D080D050
27 Screw PBA1062
D
31 Screw IPZ30P100FMC
32 13P Fiexible Cable 52492-1320
DVJ-X1 15
5 6 7 8
1 2 3 4
2.6 SLOT-IN MECHANISM SECTION
NON-CONTACT
Lubricating oil
CONTACT SIDE
A ∗1 : GYA1001 25
31
Daifree
∗2 :
SIDE
GEM1036
32
36 33 34
35
37 30
∗1 ∗1
B ∗2
38
39
∗2
∗2
40
42 41
C
43 27 ∗1 28 29
26
20
18 20
19 19
21 5 6
D
21 16 B DVPL to
23 CN2001
B DVPL to
16
CN2002
23
44 4
D 2
7 3 14
17
E
F
15
9 22
23
1
8
C
12
B DVPL to
CN2003
11 13
F
10
12
16 DVJ-X1
1 2 3 4
5 6 7 8
SLOT-IN MECHANISM SECTION Parts List

1 STCN Assy DWX2342 A
2 SPCN Assy DWX2343
3 INSW Assy DWS1342
4 Traverse Mechanism G11 Assy-S DXX2541
NSP 5 Pickup Assy OWY8037

9 Connector Assy DKP3667
10 Vessel Cushion A DEC2633
B
11 Vessel Cushion B DEC2634
12 Vessel Cushion C DEC2635
13 Float Base (G11) Assy DXB1793
14 Spacer POR (T3) DEB1566
15 Front Sheet DED1132
16 Float Rubber D3 DEB1404

17 Inside SW Base DNK4236
18 Weight G11 DNH2583
NSP 19 DRA Rubber G5 DEB1454
NSP 20 DRA Screw R (G7) DBA1151
C
21 Float Fastener DBA1139

22 Screw VBA1062
23 Screw IPZ20P060FMC
24 •••••
NSP 25 Slot-in Mechanism G5 assy DXA1906
26 Loading Motor Assy-S DEA1008

NSP 27 Worm Gear DNK3910
NSP 28 DC Motor DXM1093
29 Connector Assy PF02PY-B32
30 Loading Base Assy-S DEA1022 D
31 Main Cam DNK3407

32 Driver Gear DNK3912
33 Loading Gear DNK3911
34 SW Lever Spacer DEC2420
35 Loading Lever DNK3406
36 Clamper D4 Assy DXA1881

37 Clamper Spring DBH1374
38 Clamper Arm DNK3576
39 Eject Lever DNK3684 E
40 Lever A DNK3564
41 Lever B DNK3558
42 Guide Spring DBH1375
43 Disc Guide DNK3914
NSP 44 13P Spindole Flexibl Cable
DVJ-X1 17
5 6 7 8
1 2 3 4
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM

3.1 BLOCK DIAGRAM (1/2)
A
B DVPL ASSY A MAIN ASSY

SPINDLE OEIC IC1904-IC1907
MOTOR CN2001 IC702, IC703 K4S641632F-TC75
K4S561632E-TC75
IC2000
AN22022A 256M
FEP SDRAM ×2 64M SDRAM
PICKUP ×4
ASSY 14 18 29
RFENV
CN2007 CN701
TE
FE
VDEC VDEC
111 109 112 IC701 CONTROL DATA
CN2004 ATAPI PE5337A BUS IC903 BUS
S4702 Giant Slalom PD6649A
LPS1 LPS1 MPEG VIDEO
1 1 175 (GSL)
GNDD IC2100 DECODER
2 2 MN103S71F
B LPS2
GSL
CONTROL
3 3 176 SODC
LPS2 IC2101 BUS
S4701 PEA006B8 AV1
VIDEO
CONTROL
FLASH ROM DATA
T 67 IC304 BUS
119 120 (1M) BUS
XC2S50-5PQ208C IC305
LOAD
TRDRV
FEDRV
DMA CONTROLLER M65774BFPA

AV-1 AV DATA
71
SLMB ASSY 121 120 AV DOUT
26 53 52 74
C SYNC
91
CONT1
IC2200
CN2402 CN2401 CN2002 BD7905BFS CONT2
6ch DRIVER
IC103, IC109 IC303
K4S561632E-TC75 K4S641632F-TC75
64M SDRAM
256M
SDRAM ×2
CN5001
C
D IC113
DYW1734
32M FLASH IC506 4
F SPCN
ASSY
ROM
MOTOROLA
CONTROL
BUS
XCA56367PV150
DSP 27
INSW
ASSY CN2405 CN2404 CN2003
M
STEPPING
MOTOR IC505
TMS320DA150PGE160
AUDIO DECODER
D C IC111
HD6417709SHF200B
CPU
STCN CN2005
IC503 TE4300PF
ASSY SD/MMC MEMORY
M CARD CONTROLLER
LOADING
MOTOR CN1702
(2/2)
ASSY-S
TRAVERSE
SLOT-IN MECHANISM
MECHANISM G11 ASSY-S
G5 ASSY
CN4508
(2/2) Q
CN4503
MJCB ASSY
E
CN3401 CN3001 CN3002
M V3401
X3001
16MHz
CN3003
MFLB MAIN FL 14 12
IC3004
ASSY PEG012A8
CONTROL CPU with
FL CONTROLLER J3006 J3006
75
CN4201 SW0
S G
2 2
KSWB DIPB ASSY

CN3005
ASSY CN3004
H
F
LED2 ASSY LED1 ASSY RSWB ASSY
J3302 J3302 CN3201
K J I
CN3301 CN3202 SLDB ASSY
18 DVJ-X1
1 2 3 4
5 6 7 8
IC1301-IC1312
K4S561632E-TC75
Q L
IC1508 MJCB CMPB
HY57V161610DTC-8
256M 256M 16M SDRAM ASSY ASSY
SDRAM ×6 SDRAM ×6
IC1503 IC1501
TC74HC4053AFT LA73054
P_Y
CN703 CN4501 CN4506 CN3701 JA3701
IC1511 89 1 YOUT C YOUT CY Y
PM0033A P_CB 15 11 25 6 6 6 7 Y
PROGRESSIVE 91 2
IC1106 ENCODER 93 P_CR CB/PB
XC2S150E-6PQ208C 8 5 Cb
VIDEO MEMORY 5 CBOUT C CBOUT CR/PR
CONTROLLER 4 14 23 4
C CB
4 10 3 Cr
Y
3
MAIN V B
28 12 1
CB
25 13 CROUT C CROUT
VIDEO IC1502 C CR
DATA CR 14 16 21 2 2
IC1107 ADV7172KST 24 12 COMPOSITE
BUS
VIDEO JA4503
XC2S150E-6PQ208C V V MAIN VOUT
ENCODER 35 MAIN V VIDEO OUT
VIDEO CAPTURE 2 33 20 20
Y Y
COMPOSITE
MAIN YOUT MAIN Y
33 8 28 10 10 PREVIEW OUT
C C MAIN COUT MAIN C
29 6 31 16 16 COMPOSITE
IC1105
K4S641632F-TC75
64M SDRAM
V SUB VOUT PRE V
IC1506 35 2 33 22 22
ADV7172KST Y SUB YOUT PRE Y
JA4502
VIDEO 33 8 28 8 8 Y
ENCODER 29 C SUB COUT PRE C VIDEO
6 31 12 12
C
OUT S
IC1505
IC1509 LA73054 Y
TC74VHC157FT PREVIEW C
OUT S
C
MO DATA 1A
2 1Y DATA VOUTL 2
AV DATA 4 1 24 2 7 1 LCH OUT LOUT
3 3 24 24 L AUDIO
1B
MO DOUT 4A
IC1513 IC1510 IC1512 (1/2) R OUT
14 4Y NJM2068M
12 PQ0274A PCM1742KE
AV DOUT AQE AUDIO DAC JA4504
13 AUDIO LPF
4B
CONT1
JA4501
28 28
CONTROL
CONT2
29 29
IC1514
TC7SH08FU CN1702 CN4508 CN4602 JA4601
(1/2) (1/2)
DOUT DOUT DOUT
14 14 3 3 DOUT
SYNC IN CN4509
C SYNC 10 1 2 16 16 D
8
9 JA4505
IC1102
SN74LV08APW
IC1104
LM1881M
SYNC
IN R
DOUT
CN501 ASSY
CN2502 CN2501
SD/MMC
CARD
MONITOR
E
CN4001 E
SDCB ASSY : VIDEO DATA BUS
IC4001
UPD16306B : AUDIO DATA BUS
FL DRIVER IC
V4001
JOG FL
O
CN4002 JFLB ASSY
CN4101
F
P
JOGB ASSY
DVJ-X1 19
5 6 7 8
1 2 3 4
3.2 BLOCK DIAGRAM (2/2)
A
7 Power Supply Block
L V+5D
V+5D
CN4506 Q
CMPB 1 1
MJCB ASSY
ASSY CN3701
R V+5D
1
V+5D
1
CN4509
DOUT
CN4602
ASSY
CN101 J4502 CN4503

B FLAC1 IC4504 FLAC1
1 1 3
FLAC2 FLAC2
AN4301 J4301 CN1 2 2 5
FLAC3 IC4506 FLAC3
LIVE ORG 3 3 17
1 1 FLAC4 FLAC4
4 4 19
AC IN VLOAD V+12A
5 5 VLOAD
WHT V+12A IC4507 VLED
2 2 7 7 11
NEUTRAL
VLDCNT V+5D
9 9 VLDCNT
V+5V IC4508 V+5D
10 10 15
CN102 J4504 CN4505

V+12A
N 1
2
V+3R3
V+3R3
1
2
IC4510
9
7
V+5V
C PSWB ASSY 3
V+3R3
V+12S
3 1
V+3D1
7 7 IC4511 V+3D3
V+12S IC4513 2
8 8 IC4512
IC4514
V
V+5S V+3D2
11 11 3
SW POWER
SUPPLY
ASSY CN4507
4 1
V+12S
V+5S
4 1
CN2008
D VA5V VD5V V12DR
IC2300
IC2301 MM1478DFBE
VD1R5 PQ070XZ02ZP RESET VD3V VA3V
+1.5V REG. IC2303 +3.3V REG.
B DVPL ASSY
20 DVJ-X1
1 2 3 4
5 6 7 8
G DIPB ASSY CN3001 CN3401

M MFLB
ASSY U EJTB
FLAC1 ASSY
3 14
FLAC2 V+5D V+5D
4 13
V+5D V+5D
11 6 1 6
CN3402 CN3501
V3401
MAIN FL
CN3002
FLAC1
FLAC2
20
CN3003 CN4001
O JFLB
ASSY P JOGB
B
FLAC3
18
6 13
FLAC3
1
ASSY
FLAC4 FLAC4 V+5D V+5D
4 12 2
VLED V+5D V+5D
6 8 3 3
VLED
12
V+5D CN4002 CN4101
V4001
V+5D JOG FL
8
VLED
KSWB
2
VLED
8 S ASSY C
CN3005 CN4201
CN3004 CN3201
VLED
1 9 VLED VLED
LED1
V+5AD 6
V+5AD
4
V+5AD
5
VLED
1 J ASSY
CN3202 CN3301
I SLDB ASSY
IC1507
V+12A
9
CN1701
V+12A NJM78L05UA
+5V REG.
V+5REG
A MAIN ASSY
V+5V
7
V+3D1 V+5V V+5D
1
V+3D3
2 IC1103
V+3D1 MM1561JF V1R8VMC
V+3D2 V3R3
3 +1.8V REG.
SDCB
IC902
2
V3R3
7 E ASSY E
PQ070XZ02ZP V+2DEC CN501 CN2502
+2V REG.
IC302
IC1106 V+3D3 MM1562FF V+2DMA
MM1561JF +2V REG.
V+3D2 V1R8CAP
+1.8V REG.
IC121
IC301 PQ070XZ02ZP V+2SH
MM1562FF +2V REG.
V+2AV1
+2V REG.
IC504
IC1504 MM1561JF V1R8M0T
MM1562FF +1.8V REG.
V+2PRO
+2V REG.
F
DVJ-X1 21
5 6 7 8
1 2 3 4
3.3 OVERALL WIRING DIAGRAM
A
SW POWER SUPPLY
POWER CORD
N V ASSY (DWR1378)
(ADG7021) PSWB ASSY
(DWS1345)
JA4502
JA4503
D SPCN ASSY
(DWX2343)
SLOT-IN MECHANISM G5 ASSY (DXA1906)
B
SPINDLE
MOTOR
(DXM1186)
Q
F MJCB ASSY
INSW ASSY
DVPL ASSY (DWX2341)
(DWS1342)
(DWG1573)
TRAVERSE MECHANISM G11 ASSY-S
C
PICKUP ASSY
(OWY8037)
B
(DXX2541)
STEPPING MOTOR
(DXM1159)
A A 1/10 - A 10/10
MAIN ASSY (DWG1570)
E LOADING MOTOR
C STCN ASSY
(DWX2342)
ASSY-S
(DEA1008)
T SLMB ASSY
(DWS1344)
E
SDCB ASSY
F
(DWX2344)
22 DVJ-X1
1 2 3 4
5 6 7 8
÷ When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or
"PCB PARTS LIST". A
÷ The > mark found on some component parts indicates the importance of the safety factor
of the part. Therefore, when replacing, be sure to use parts of identical designation.
÷ : The power supply is shown with the marked box.
K LED2 ASSY
(DWG1579)
JA3701
JA4601
JA4504
JA4505
JA4501
S3701
KSWB ASSY
CMPB ASSY
S (DWS1343)
L (DWG1577) R J LED1 ASSY
(DWG1578)
B
DOUT ASSY
(DWG1574)
I
SLDB ASSY
(DWS1347)
C
U
EJTB ASSY
(DWS1348)
G
DIPB ASSY
(DWG1575) M
MFLB ASSY
(DWG1576)
H
RSWB ASSY
(DWS1346)
O P F
JFLB ASSY JOGB ASSY

(DWG1571) (DWG1572)
DVJ-X1 23
5 6 7 8
1 2 3 4
3.4 MAIN ASSY (1/10)
A 9/10 A 2/10
A 1/10 MAIN ASSY (DWG1570) A 8/10
A 4/10
A A 8/10
A 6/10 A 5/10
A 3/10 A 3/10
A 8/10
A 6/10
1
C A 2/10
A 9/10
A 8/10
A 3/10
A 9/10 A 6/10
A 9/10 A 2/10
F A 9/10
A 1/10
24 DVJ-X1
1 2 3 4
5 6 7 8
A
A 2/10-4/10
A 2/10-4/10,
6/10
A 2/10-6/10, 8/10, 9/10
A 1/10
DVJ-X1 25
5 6 7 8
1 2 3 4
A A 2/10 MAIN ASSY (DWG1570)
A 1/10
A 4/10 3 4 A 4/10
B
A 1/10, 3/10-6/10,
8/10, 9/10
A 3/10
7
C
A 1/10
A 9/10
A 1/10, 3/10-6/10, 8/10, 9/10

A 5/10
D
A 1/10
E
A 1/10, 3/10-6/10,
A 6/10
A 5/10
A 3/10
8/10, 9/10
A 1/10, 3/10, 4/10

A 1/10, 3/10, 4/10
A 2/10
26 DVJ-X1
1 2 3 4
5 6 7 8
A 6/10
A 9/10
A 1/10 B
A 6/10, 8/10
(VD)
C
A 6/10
A 9/10
A 3/10, 8/10
(D)
D
(AD)
A 9/10
A 9/10
5
E
A 1/10, 3/10-6/10, 8/10, 9/10
(AD) (D)
: AUDIO SIGNAL ROUTE : DIGITAL OUT SIGNAL ROUTE F
(VD)
: VIDEO SIGNAL ROUTE
A 2/10
DVJ-X1 27
5 6 7 8
1 2 3 4
A
A 3/10 MAIN ASSY (DWG1570)
A 3/10
A 1/10
A 1/10
8
A 1/10, 2/10, 4/10-6/10, 8/10, 9/10
E CN2502
B
A 1/10, 2/10, 4/10-6/10, 8/10, 9/10
A 1/10, 2/10, 4/10-6/10,

E
8/10, 9/10
A 2/10
A 2/10, 8/10
A 3/10
28 DVJ-X1
1 2 3 4
5 6 7 8
9 A 5/10
DSP
10
A 1/10
(AD)
(D)
(D) (AD)
A 9/10
(AD)
: AUDIO DATA SIGNAL ROUTE
(D)
: DGITAL DATA SIGNAL ROUTE
A 3/10
DVJ-X1 29
5 6 7 8
1 2 3 4
A
A 2/10
B
A 8/10
A 8/10
A 9/10
E A 1/10
A 4/10
30 DVJ-X1
1 2 3 4
5 6 7 8
A 2/10 A
A 1/10-3/10, 5/10, 6/10, 8/10, 9/10
A 1/10-3/10, 6/10,
8/10, 9/10
B
B
CN2007
D
A 2/10
: ATAPI DATA SIGNAL BUS ROUTE
A 1/10
11
A 4/10
DVJ-X1 31
5 6 7 8
1 2 3 4
A
A 3/10
A 6/10
A 1/10-4/10, 6/10, 8/10, 9/10
B
A 2/10
A 1/10
A 2/10
A 5/10
32 DVJ-X1
1 2 3 4
5 6 7 8
12
C
A 6/10
A 6/10
13
A 5/10
DVJ-X1 33
5 6 7 8
1 2 3 4
A 7/10
A 1/10-5/10, 8/10, 9/10
A 1/10-5/10, 8/10, 9/10

C
D
A 1/10-5/10, 8/10, 9/10
(VD)
A 1/10
A 1/10 A 5/10 14
A 2/10
A 6/10
A 5/10
A 6/10
34 DVJ-X1
1 2 3 4
5 6 7 8
A 2/10
A 9/10
B
A 1/10-5/10, 8/10, 9/10
(VD)
15
A 2/10, 8/10
(VD)
A 8/10
(VD)
A 8/10
A 1/10-5/10, 8/10, 9/10
(VD)
A 2/10
A 2/10, 8/10
E
A 1/10
16
A 5/10
17
A 1/10
A 2/10
A 9/10
F
(VD)
: VIDEO DATA SIGNAL BUS ROUTE
A 1/10
A 6/10
DVJ-X1 35
5 6 7 8
1 2 3 4
3.10 MAIN ASSY (7/10)
18
A 6/10
A 7/10
36 DVJ-X1
1 2 3 4
5 6 7 8
19
A 7/10
DVJ-X1 37
5 6 7 8
1 2 3 4
3.11 MAIN ASSY (8/10)
A
A 8/10 MAIN ASSY
(DWG1570)
A 1/10
20
A 6/10
(V)
A 2/10, 6/10 (S-C)

(S-Y)
(Y)
(VD)
(Cb)
A 1/10-6/10, 9/10
(Cr)
(Y)
C
Color Difference Level ADJ
(Cb)
D
(Cr)
A 1/10-6/10, 9/10
E
A 1/10
A 1/10
(VD)
A 6/10
F
A 1/10
A 2/10, 6/10
A 8/10
38 DVJ-X1
1 2 3 4
5 6 7 8
A 1/10
(V)
(V)
(S-C)
(S-C)
(S-Y)
(S-Y)
(Y)
(Y)
(Cb)
(Cb)
(Cr) B
(Cr)
A 4/10
(V)
: V SIGNAL ROUTE
(S-C)
: S-VIDEO OUT C SIGNAL ROUTE
(S-Y)
A 1/10 : S-VIDEO OUT Y SIGNAL ROUTE
(Cr)
: Cr SIGNAL ROUTE
A 4/10 (Y)
: Y SIGNAL ROUTE
A 6/10 (Cb)
: Cb SIGNAL ROUTE
21 C
(VD)
A 2/10, 6/10
A 1/10-6/10, 9/10
D
A 9/10
A 9/10 (D)
22
(AD)
(D)
E
A 9/10
A 2/10, 3/10
(A)
(AD)
(A)
(A) (A)
23
A 1/10
A 1/10-6/10, 9/10
A 9/10
(AD)
: AUDIO DATA SIGNAL ROUTE F
A 9/10 (A) (VD)
: AUDIO SIGNAL ROUTE : VIDEO DATA SIGNAL BUS ROUTE
(D) : DIGITAL OUT SIGNAL ROUTE
A 8/10
DVJ-X1 39
5 6 7 8
1 2 3 4
3.12 MAIN ASSY (9/10)
A 2/10
A 2/10
C
A 6/10
Master Clock ADJ
A 1/10-6/10, 8/10
A 3/10
A 4/10 A 8/10
E
A 2/10
A 2/10
A 9/10
40 DVJ-X1
1 2 3 4
5 6 7 8
A
A 1/10
A 2/10
A 8/10 27 (A)
26
25 (V)
24
(V)
: VIDEO SIGNAL ROUTE (S-C)
(S-C)
Q CN4501
(S-Y)
: S-VIDEO OUT Y SIGNAL ROUTE
(Cr)
: Cr SIGNAL ROUTE
(Y)
: Y SIGNAL ROUTE (S-Y) B
(Cb)
: Cb SIGNAL ROUTE
(A) (Y)
: AUDIO SIGNAL ROUTE
(Cb)
(D)
A 8/10
: DIGITAL OUT SIGNAL ROUTE
(Cr)
A 6/10
A 1/10
A 8/10 C
A 1/10 A 1/10
(D)
Q CN4508
A 2/10
D
A 2/10
A 1/10
E
Q CN4505
A 9/10
DVJ-X1 41
5 6 7 8
1 2 3 4
3.13 MAIN ASSY (10/10)
A
A 10/10
42 DVJ-X1
1 2 3 4
5 6 7 8
A 10/10
DVJ-X1 43
5 6 7 8
1 2 3 4
3.14 DVPL ASSY
A
PICKUP ASSY
CAUTION :
FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE.
REPLACE ONLY WITH SAME
TYPE NO. DEK1086- 466.125 MFD,
B BY LITTELFUSE INK. FOR IC2303.
)T(
)T(
(F)
(F)
Q CN4507
(L)
LOADING MOTOR
(T) ASSY-S
(T)
D
CN2401
(F)
(F)
D
(S)
CN2404
CN4701
(S)
(S)
(S)
C
T
(L)
E
B A 4/10 CN701
44 DVJ-X1
1 2 3 4
5 6 7 8
B DVPL ASSY (DWX2341) A
(L)
: ATAPI DATA SIGNAL BUS ROUTE

: RF SIGNAL ROUTE
(F)
: FOCUS SERVO LOOP LINE
(T)
: TRACKING SERVO LOOP LINE
(S)
: STEPPING SERVO LOOP LINE
(L)
: LOADING MOTOR LOOP LINE
F
B
DVJ-X1 45
5 6 7 8
1 2 3 4
3.15 STCN, SPCN, SDCB and INSW ASSYS
C STCN ASSY (DWX2342)
B (S)
(S)
STEPPING
B CN2003 (S)
MOTOR
(S)
(S)
: STEPPING SERVO LOOP LINE
C
D SPCN ASSY (DWX2343)
SPINDLE
MOTOR
B CN2002
F CN5001
C D
46 DVJ-X1
1 2 3 4
5 6 7 8
E SDCB ASSY (DWX2344)
A 3/10
CN501
SD/MMC CARD
CONNECTOR
F INSW ASSY (DWS1342)
D CN2403
E
E F
DVJ-X1 47
5 6 7 8
1 2 3 4
3.16 DIPB and RSWB ASSYS
A
G DIPB ASSY (DWG1575)
DKN1356
CN3401
B
M
330uH
C
CN4503
Q
D
OCN4001
G I CN3201 S CN4201
48 DVJ-X1
1 2 3 4
5 6 7 8
H RSWB ASSY
(DWS1346) G H
DVJ-X1 49
5 6 7 8
1 2 3 4
3.17 SLDB, LED1, LED2, CMPB, MFLB and PSWB ASSYS
A I SLDB ASSY (DWS1347)
ZERO POINT
ADJ.
GCN3004
J LED1 ASSY
(DWG1578)
K LED2 ASSY
(DWG1579)
L CMPB ASSY (DWG1577)
D
(V) (V)
(Cr)
(Cr)
CN4506
(Cb)
(Y) (Cb)
Q
(Y)
I J K L
50 DVJ-X1
1 2 3 4
5 6 7 8
M MFLB ASSY (DWG1576) A
U CN3501
DKN1357
B
CN3001
G
1 C
(V)
(Cr)
: Cr SIGNAL ROUTE
N PSWB ASSY (DWS1345)
(Y)
: Y SIGNAL ROUTE
(Cb)
: Cb SIGNAL ROUTE
AC IN E
V CN1
M N
DVJ-X1 51
5 6 7 8
1 2 3 4
3.18 JFLB and JOGB ASSYS
A O JFLB ASSY (DWG1571)
G
CN3003
O SHEET SW
52 DVJ-X1
1 2 3 4
5 6 7 8
P JOGB ASSY (DWG1572)
O P
DVJ-X1 53
5 6 7 8
1 2 3 4
3.19 MJCB and DOUT ASSYS
A Q MJCB ASSY
(DWG1573)
(Cr) (Cr)
(Cb) (Cb)
(Y) (G/Y)
A 9/10
(S-C) (S-C)
CN1703
(S-Y) (S-Y)
(V) (V)
(A) (A)
V
CN101
A 9/10
CN1702
(D) (D) (D)
V (D)
CN102
Q B CN2008 A 9/10 CN1701 G CN3002

54 DVJ-X1
1 2 3 4
5 6 7 8
(V)
(S-C) A
(S-Y)
: S-VIDEO OUT Y SIGNAL ROUTE
(Cr)
: Cr SIGNAL ROUTE
(Y)
: Y SIGNAL ROUTE
(Cb)
: Cb SIGNAL ROUTE
(A)
: AUDIO SIGNAL ROUTE
(D) : DIGITAL OUT SIGNAL ROUTE
(Cr)
(Cb) (S-Y)
(Y) (S-C)
(S-C)
(V)
(S-Y)
(V)
(A)
(A)
CAUTION : FOR CONTINUED PROTECTION AGAINST

RISK OF FIRE. REPLACE ONLY WITH C
SAME TYPE NO. ICP-N20, MFD BY ROHM
CO., LTD. FOR IC4513.
RISK OF FIRE. REPLACE ONLY WITH
(V)
SAME TYPE NO. AEK7002 MFD, BY
LITTELFUSE INK. FOR IC4501 and IC4507. (R/Cr)
CAUTION : FOR CONTINUED PROTECTION AGAINST (B/Cb)
SAME TYPE NO. AEK7005 MFD, BY (G/Y)
LITTELFUSE INK. FOR IC4508. L CN3701
CAUTION : FOR CONTINUED PROTECTION AGAINST CAUTION : FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE. REPLACE ONLY WITH RISK OF FIRE. REPLACE ONLY WITH
SAME TYPE NO. AEK7008 MFD, BY SAME TYPE NO. AEK7015 MFD, BY
LITTELFUSE INK. FOR IC4504. LITTELFUSE INK. FOR IC4512.
D
LITTELFUSE INK. FOR IC4514.
LITTELFUSE INK. FOR IC4506.
LITTELFUSE INK. FOR IC4510 and IC4511.
(D) (D)
(D)
R DOUT ASSY (DWG1574) F
Q R
DVJ-X1 55
5 6 7 8
1 2 3 4
3.20 KSWB, SLMB and EJTB ASSYS
S KSWB ASSY (DWS1343)

CN3005
B
G
T SLMB ASSY (DWS1344)
B
CN2004
S T
56 DVJ-X1
1 2 3 4
5 6 7 8
U EJTB ASSY (DWS1348)
M
CN3402 C
U
DVJ-X1 57
5 6 7 8
4 3 1 2
DVJ-X1 58
J4301
C7
N
BEA51 C58
CN201
V V
Q51
C52
R55 BEA71 C78 F
NEUTRAL
LIVE
C51
BEA7
Q72
C5
Q1
C73
R69
C701
V
CN1
R79 R78 R52 R93 R92 R91

R19
R5
D75
Q73
F1
D78 D79 R77 R76 R75 D71 Z1

R81 R80 C77
C21
R72
C72
Q2
D76 D74 D73 D72 C1

R71
C31
R83 D77
C10
C9
Q71
C71 R1
D5 C20
R12
Q53
(DWR1378)
R82 R8
R7
R51
L1
R6
R11 R13
Q52
Q54
D7
C60
C59 R9 D4 E
D55 R64
R62
L2
C62
PC1
R86
R85
R84
R58 R53
R57
R61 R63 R65 C2

R70
R56
D59 R68 R66 R67

D57
D15 R10
C11 R17 D6
R59 D54
NTC2
NTC1
D58 R54
D14
SW POWER SUPPLY ASSY
PC2
C61
D12
D11 D13
D65 R60
C66 R57 D56

T1
T51
D201
D501
D601
C601
D401
D
C501 C401 C211
D151
D101
C152
C105
D301
D302 R612
D406 D102
R501 C602
C301
C605
C151
C302
R601
C504 R450
C101
P401
IC601
W1
Q601
C102
R302
R605 R610
IC301 PC2 R301
PC601 R111
L101
R407
D405 D404 D403 L601 R102

D110 PC1
Q403
R101
Q101
R310 C310
D602
R304 VR301 R403

R611 R601 R603
C502
C
R110 C110
C604 R115 C115

C402 R609 R608 R602 R104 VR101 R103
W2 W2
R506 D503 C503
D502 R406 R405
R507
C505 R404 R403
R505
D505
Q402
IC201
R402
Q501
C404
D402
L301
• NOTE FOR FUSE REPLACEMENT
P501
R112
Q401
R113
C612
R114 B
R202 R201 C403
C103
L102
C202
PC601 R422 R421
Q421
C201
C104
IC202
C611 C203
C304 R424 R423
R425 D421
W3
C511 C421 D422
W3
W1
C512
4
3
6
9
5
8
2
7
1
9
6
4
5
3
2
1
8
7
11
10
11
CN101
CN102
10 V+5V
V+5S
GADA
GNDV
GNDS
GNDS
GNDD
GNDD
GNDD
V+12A
V+12S
V+12S
V+3R3
V+3R3
V+3R3
FLAC4
FLAC3
FLAC2
FLAC1
VLOAD
GLOAD
REPLACE WITH SAME TYPE AND RATINGS OF FUSE.
VLDCNT
A
J4504 Q
J4502
CAUTION - FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.
Q
3.21 SW POWER SUPPLY ASSY
4 3 2 1
5 6 7 8
WAVEFORMS
DJ MODE : PLAY, VINAL, SD IN, MASTAR TEMPO:OFF, SRIDER:0%, HOT CUE:OFF
DISK : DVD-REF-Z1 TITLE35-01 A
A 1/10 MAIN ASSY A 1/10 MAIN ASSY A 2/10 MAIN ASSY A 2/10 MAIN ASSY
IC304- 59pin (33MGSL)
1 IC111- 163pin (CLK66M)
V: 1V/div. H: 4nS/div.
2 IC109- 38pin (66MSDR) 3 IC304- 77pin (SYS_66M)
3 V: 1V/div. H: 10nS/div.
4 B
1 2
3
A 2/10 MAIN ASSY A 2/10 MAIN ASSY A 2/10 MAIN ASSY

5 IC305- 55pin (27MAV1) 6 IC305- 64pin (16/36M)
7 IC304- 114pin (DIS_SCLK)
V: 1V/div. H: 10nS/div. V: 1V/div. H: 400nS/div.
C
7
6
5

8 IC503- 38pin (CARD_66M)
9 IC506- 55pin (27M_MOT)
10 IC506- 16pin (22/24M)
8 9 10

11 IC703- 38pin (SLMCLK)
12 IC904- 38pin (M1CLK)
13 IC906- 38pin (M2CLK)
13
11 12
DVJ-X1 59
5 6 7 8
1 2 3 4
A MAIN ASSY
A
14 IC1106 - pin 185 [VCLK54M]
V: 1V/div. H: 4nsec/div. 15 IC1107 - pin 80 [ME54M]
V: 1V/div. H: 4nsec/div.
16 IC1107 - pin 182 [CAP_66M]
V: 1V/div. H: 4nsec/div. 17 IC1107 - pin 185 [AV1_CLK]
17
14 16
B 15
18 IC1309 - pin 38 [CLK]
19 IC1311 - pin 38[CLKH]
V: 1V/div. H: 4nsec/div. 20 IC1502 - pin 48 [M_PRG27M]
V: 1V/div. H: 10nsec/div. 21 IC1506 - pin 48 [S_PRG27M]
C
18 19
20 21
22 IC1510 - pin 16 [22/24M_DAC]
23 IC1513 - pin 6 [22/24M_AQE]
V: 1V/div. H: 10nsec/div. 24 CN1703 - pin 20 [MAIN_V] 25 CN1703 - pin 22 [PRE V]
V: 1V/div. H: 200usec/div.
V: 1V/div. H: 10nsec/div. V: 1V/div. H: 200µsec/div.
22
23 24 25
A 9/10 MAIN ASSY A 9/10 MAIN ASSY

E
26 CN1703 - pin 24 [LOUT]
V: 2V/div. H: 200µsec/div.
27 CN1703 - pin 26 [ROUT]
V: 2V/div. H: 200usec/div.
27
26
60 DVJ-X1
1 2 3 4
5 6 7 8
M MFLB ASSY O JFLB ASSY

A
M MFLB ASSY
IC3401 - pin 11 [FL-SCLK]
1 V: 1V/div. H: 200nsec/div.
O JFLB ASSY
IC4001 - pin 38 [/SCK2]

1 V: 1V/div. H: 1usec/div.
DVJ-X1 61
5 6 7 8
1 2 3 4
VOLTAGES Voltage measurement mode

DJ MODE: PLAY , VINAL , SD IN , MASTER TEMPO: OFF , SRIDER: 0%, HOT CUE: OFF
A A 1/10 MAIN ASSY A 2/10 MAIN ASSY A 5/10 MAIN ASSY

IC121(PQ070XZ02ZP)
Pin No. Voltage(V)
1 3.3
IC301(MN1562FF) IC902(PQ070XZ02ZP)
2 3.3 Pin No. Voltage(V) Pin No. Voltage(V)
3 2.0 1 2.5 1 3.3
4 1.3
2 0 2 3.3
5 0
3 0 3 2.5
4 1.2 4 1.3
FPGA Configuration 5 3.3 5 0.0
B signal 6 0
7 3.3
IC111(HD6417709S)
Pin No. Voltage(V) IC302(MN1562FF)
125 3.3 Pin No. Voltage(V)
129 3.1 1 2.5

2 0
193 3.3
3 0
A 6/10 MAIN ASSY
4 1.2
Reset signal
C 5 3.3
output
6 0 IC1103(MN1561JF)
IC101(TC74VHC04FT)
Pin No.
1 1.8
Voltage(V)
2 0
2 3.3
3 0
4 3.3
6 3.3 A 3/10 MAIN ASSY 4 0.6
5 3.3
8 3.3
IC504(MN1561JF) 6 0
10 3.3
Pin No. Voltage(V) 7 3.3
D 12 3.3
1 1.8
2 0
Reset signal
output 3 0 IC1108(MN1561JF)
IC102(TC74VHC04FT) 5 3.3 1 1.8
Pin No. Voltage(V) 6 0 2 –
2 3.3 7 3.3 3 0
4 3.3 4 0.6
6 3.3 5 3.3
E 8 3.3 6 0
10 3.3 IC507(TK11116CS) 7 3.3
Pin No. Voltage(V)
1 3.3
2 0
FPGA Configuration
3 1.3
signal
4 1.6
IC105(TC7SH08FU) 5 3.3
Pin No. Voltage(V)
F 4 3.3
62 DVJ-X1
1 2 3 4
5 6 7 8
Q MJCB ASSY G DIPB ASSY

A 8/10 MAIN ASSY
J4502(51048-1100) A
to POWER ASSY
IC1504(MN1562FF) Pin No. Voltage(V) Only IC power supply
Pin No. Voltage(V) 1 8.7 / GND terminal
2 8.7
1 2.5
3 10.8 IC3004(PEG012A)
2 0
3 0
5 44.3 8 0
4 1.2
6 0 9 0
5 3.3
7 12.2 10 0
6 0
8 0 B
7 3.3 11 0
9 4.8
12 4.6
10 5.0
14 0
11 0
16 4.6
IC1507(NJM78L05UA
J4504(DKP3864) 18 4.6
Pin No. Voltage(V) to POWER ASSY
19 4.6
20 4.6
2 0 1 3.5
21 4.6
3 12.0 2 3.5
22 4.6
3 3.5
4 0
25 4.6 C
5 0 26 4.6
6 0 27 4.6
7 12.3 62 4.6
8 12.3 64 0
A 9/10 MAIN ASSY
9 0 81 0
IC1708(MN1561JF) 10 0 82 0
Pin No. Voltage(V) 11 5.1 83 0
1 1.8 84 0
2 0 CN4507(B4B-EH) 85 0
to DVPL ASSY 86 0 D
3 0
Pin No. Voltage(V) 87 0
4 0.6
1 12.2 88 0
5 3.3
2 0 96 0
6 0
3 0 98 4.6
7 3.3
4 5.0 99 4.6
CN1701(B10B-PH-SM3)
to MJCB ASSY CN4505(B10B-PH)
to MAIN ASSY
Pin No. Voltage(V) Pin No. Voltage(V)
1 3.4 E
1 3.4
2 3.4 2 3.4
3 3.4 3 3.4
4 0 4 0
5 0 5 0
6 0 6 0
7 4.8 7 4.8
8 0 8 0
9 12.0 9 12.1
10 0
10 0 F
DVJ-X1 63
5 6 7 8
1 2 3 4
M MFLB ASSY O JFLB ASSY

A
Only IC power supply Only IC power supply

/ GND terminal / GND terminal
V3401(DEL1052) IC4001(UPD16306B)
Pin No. Voltage(V) Pin No. Voltage(V)
1 8.7 1 0
2 8.7 2 42
3 8.7 3 0
B 4 0
6 44
7 0 5 0
8 0 6 0
13 4.8 7 0
94 8.7 31 42
95 8.7 32 0
96 8.7 33 0
34 0
35 0
41 4.8
C
42 4.8
46 0
47 0
48 0
49 0
50 42
74 0
75 0
76 0
D 77 0
78 0
79 42
80 0
81 0
100 0
64 DVJ-X1
1 2 3 4
5 6 7 8
VOLTAGES DJ
Voltage measurement mode
MODE: PLAY , VINAL , SD IN , MASTER TEMPO: OFF , SRIDER: 0%, HOT CUE: OFF
B DVPL ASSY B DVPL ASSY B DVPL ASSY A

IC2101 (PEA006B8)
Pin No. Voltage (V)
IC2000 (AN22022A) IC2200 (BD7905BFS) 1 1.3
Pin No. Voltage (V) Pin No. Voltage(V) 2 2.2
1 2.2 1 3.1 3 1.85
2 0.18 2 3.1 4 0.88
3 3.1 5 0.86
3 3.9
4 3.1 6 0
4 0.18
5 3.1 7 3.3
5 4.3
6 3.1 8 4.9
6 0.05 7 1.3 9 0
7 1.6 8 0 10 0.23 B
8 3.3 9 5.8 11 2.2
9 0 10 12 12 0.69
10 3.3 11 5.8 13 2.3
11 0 12 0 14 1.65
13 0 15 1.65
12 0
14 0 16 1.65
13 1.65
15 0 17 1.67
14 1.65 18 1.65
16 0
15 0 17 0 19 1.9
16 2 18 5.8 20 1.75
17 1.65 19 12 21 2.5
18 1.65 20 12 22 3.1
C
19 0 21 1.46 23 2.8
22 3.3 24 0
20 1.56
23 3.3 25 3.2
21 2.23
24 1.75 26 2.85
22 2.2 27 2.65
25 0
23 1.9 28 2.6
26 1.65
24 1.9 27 1.65 29 2.85
25 1.7 28 1.65±0.5 30 0.36
26 0.35 29 1.65±0.5 31 1.2
27 0 30 12 32 1.45
28 0 31 12
29 1.62 32 12 B DVPL ASSY
D
33 0.83
30 1.98
34 7—12
31 1.55
35 7—12
32 1.69 IC2300 (MM1478DFBE)
36 7—12
33 2.12 37 7—12 Pin No. Voltage (V)
34 2.25 38 0 1 0
35 2.25 39 0 2 3.3
36 2.2 40 0 3 4.9
41 0 4 4.9
37 2.2
42 0 5 3.3
38 4.83
43 0 6 0
39 2.2 7 0
44 4.9
40 2.2 8 4.85 E
45 2.43
41 3.3
46 2.43
42 2.2 47 2.5
43 2.35 IC2301 (PQ070XZ02ZP)
48 2.37
44 2.34 Pin No. Voltage (V)
49 5.6
1 4.27
45 4.83 50 5.6
2 4.27
46 2.35 51 12
3 1.5
47 2.35 52 1.65
4 1.25
53 1.65
48 2.2 5 0
54 4.9
DVJ-X1 65
5 6 7 8
1 2 3 4
VOLTAGES Voltage measurement mode

DJ MODE: PLAY , VINAL , SD IN , MASTER TEMPO: OFF , SRIDER: 0%, HOT CUE: OFF
A B DVPL ASSY
IC2100 (MN103S71F) IC2100 (MN103S71F) IC2100 (MN103S71F)

Pin No. Voltage (V) Pin No. Voltage (V) Pin No. Voltage (V)
1 3.3 61 0.2 121 0
2 3.3 62 0.3 122 3.3
3 0 63 0 123 0
4 3.3 64 0 124 3.3
5 0 65 3.3 125 0
6 3.3 66 0 126 0
7 0 67 1.67 127 0
8 0 68 0 128 0
9 0 69 0 129 4.9
B 10 1.3 70 3.3 130 0
11 2.2 71 0 131 3.3
12 1.5 72 1.65 132 3.3
13 1.85 73 0 133 2.1
14 0.88 74 0 134 4.75
15 0.86 75 1.46 135 3.3
16 3.3 76 0 136 0
17 0.23 77 1.5 137 3.3
18 2.2 78 0 138 4.77
19 1.65 79 0.33 139 1.75
20 0 80 0.45 140 0
21 0 81 1.65 141 4.9
22 0.69 82 0 142 1
C
23 2.3 83 0 143 4.9
24 1.65 84 0 144 0.7
25 1.65 85 1.65 145 0
26 1.65 86 1.65 146 3.3
27 1.67 87 3.3 147 0.9
28 1.65 88 0.77 148 4.75
29 1.9 89 1.64 149 4.75
30 1.75 90 3.3 150 4.9
31 0 91 0 151 3.5
32 3.3 92 1.65 152 3.5
33 2.5 93 1.65 153 3.5
34 3.1 94 0 154 3.7
D 35 2.8 95 1.5 155 3.7
36 3.2 96 1.5 156 3.3
37 2.85 97 0 157 1.5
38 2.65 98 1.63 158 0
39 2.6 99 1.63 159 3.6
40 2.85 100 1.65 160 3.6
41 0.36 101 1.5 161 3.6
42 1.2 102 2.2 162 3.6
43 1.45 103 1.5 163 3.6
44 0 104 1.65 164 3.6
45 3.3 105 3.3 165 3.6
46 0 106 1.95 166 0
E 47 3.3 107 3.3 167 3.3
48 3.3 108 0.3 168 3.5
49 3.3 109 1.65 169 3.5
50 3.3 110 2 170 3.5
51 3.3 111 1.65 171 3.5
52 1.6 112 1.62 172 4.9
53 1.63 113 1.56 173 4.8
54 0 114 1.65 174 0
55 1.65 115 1.61 175 3.3
56 1.84 116 0 176 0
57 1.45 117 0
58 0.3 118 0
59 0—3.3 119 1.65
F
60 0—3.3 120 1.61
66 DVJ-X1
1 2 3 4
5 6 7 8
4. PCB CONNECTION DIAGRAM
A
NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic
diagrams.
2. A comparison between the main parts of PCB and schematic
diagrams is shown below.
Symbol In PCB Symbol In Schematic Part Name
Diagrams Diagrams
B C E B C E
Transistor
B C E
B C E B C E
B
Transistor
B C E with resistor
D G S D G S
Field effect
D G S transistor
Resistor array
3-terminal
regulator
C
3. The parts mounted on this PCB include all necessary parts for
several destinations.
For further information for respective destinations, be sure to
check with the schematic diagram.
4. View point of PCB diagrams.
Connector Capacitor
SIDE A D
P.C.Board Chip Part SIDE B
DVJ-X1 67
5 6 7 8
1 2 3 4
4.1 MAIN ASSY
SIDE A
CN1701
Q CN4505 CN1703
Q
A
10.GNDD
V+3D3
5.GNDD
V+3D2
1.V+3D1
GNDD
GNDD
KN1702
V+12A
GNDV
V+5V
A
F1708
F1709
F1710
F1711
F1712
F1713
MAIN ASSY
CN1703
OPEN
30
SIDE 30 1 17
F1704
F1703
F1702
FPMV0 R1769
F1305
R1762
CN1701 R1766
11 1010
KN1701
0 1 A
B C1526
0 1 2 3 0 1 2 3 4 5 6 7 8 9
F1715
C 19
3636
F1306
F1714
0 1 19
IC1501
C1702
C1637
IC1501
F1301
F1705
R1758
R1759
R1760
R1755
R1756
R1757
F1706
R1606 C1622 C1625
R1605 R1610 C1626
C1301
C1705
DC FC R1761
Q1509
C1517
IC1504
C1703
F1302
11 18
Q1509 18
R1612
F1308 F1307 R1629 C1636
C1510 R1516 C1531
C1706
C1713
C1363
R1512
Q1506 Q1503 C1386 C1714 Q1506 Q1503
C1557
C1704
C1362 R1302 C1359 R1301 R1303 C1701
IC1512 C1575
R1619
R1626
C1633
R1304 IC1512 Q1501
5 4 36
Q1501 Q1502
F1304
F1303
54 28 54 28 C1358 36 19
19 Q1502 C152
C1605
54 28 54 28 C1532
C1523
Q1504 Q1504
R1627
R1628
IC1505 8 1 IC1505 C1559 C1560
IC1311
IC1309
C1604 1818
IC702 C1612 11 8
B 120 120
C1602
IC1311 IC1309
C1576 C1569
C1613 C1581
C1547 R1557
121
1 27 1 27 R1562
121
Q1512 1 27 1 27 Q1512
88
C1377 C1378 C1367 C1368 D1501
9
Q1511 Q1514 C1369 C1370
C1603
C1379 Q1511 Q1514
C1376 C1380 C1366 C1553 C1566
R1599 C1578 IC1511
IC1510 IC1511 54 C1334 C1335 54 C1330 C1331 28 C1552 C1554
16
28
1
16
1
IC1510
54 28 54 28 C1574
C1592
C1594
36 36 25 25
C1544 24 R1572
37
IC1307
24
37
IC1305
R1544 R1571
R1594
R1586
R1543
IC1307 IC1305 IC703 R1542
160
C1593 C1577
1 1 R1541 R1570
27 27
13
13
48 48
R1540 R1569
1 27 1 27 1 12
160
C1349 C1350 C1339 C1340 C1619 1
C1534
R1533
C1543
IC701 C1348
C1351 C1352 C1341 C1342 F1511 12
R1559 11 40
IC1506 IC1506
C1614
C1338 C1573
54 C1306 C1307 28 54 C1302 C1303 28 R1539
C1540
R1601
C1607
C1606
C1542
54 28 54 28 R1538
C1176 C1177
C1119 C1615 C1
IC1301
R1616
R1106
IC1104 C1154 R1158
R1604
R1602
C1608
R1615
IC1303 5
IC1104
4
IC1301 IC1702 C1152 R1157 R1607
R1165
C1145
C1118
C1113 C1161
F1701
IC1303
F1707
C1733
C1734
C1144
1 1 A
C1180
27 27 R1107 8 C1160
1
1
8
IC1107 1 27 1 27 52 IC1107
R1720
52
C1112
C
1
R1105 1
208
53
C1313 208
C1136
53
C1731
C1320 C1323 C1324 C1310 C1314 C1732 104
C1178
IC301 C1322 105
4
C1312 5
4
C1179
C1321 C1311
C1135
1
1
8
8
R1114
R1113
IC506
C1134
3 1
3 1
R1128 R1109
R1166
4 B
C1132
4 5
C1171
R1110 R1116
5
R1112
R1118
C1121 C1123 C1126 F1109

F1103
3
C1122 C1124 C1125
C1133
C1170
A
C1130
1
R1108 R1111 R1115
5
R1117
22 1
C1127 1
R1160
IC1106
C1174
IC1106
C1175
C1131
104 53
53
3 4 4
104
C1129
R1132 R1129
105
3 X170
52
105
104 157
104
52
157
VC1701
R1130
105
105 156
C1139
C1141
C1140
R1101
C1143 C1158 156 C1183

C1138
7
7 156
R1134
C1137 C1172 1
R1145 R1139
IC305 IC504 C1110 C1142 C1151 157

C1159
C1146 C1150
R1137
F1111
R1745
R1714
F1108
5
C1147
4
C1716
4 IC1108
F1102
IC1703 IC1108 5
C1149
IC1703 F1105
B C1184
R1144
R309
R380
R1711 C1719 D1701
C1739
R1744
C1153 C1148
IC101
R351 R348
C1156
R1147 R1713
D
R381
R319
IC1701 R1150 IC1701
L1701
C1157
C1738
C1722
C1720
R1159 C1155
R1152
R1705 R376 R377
D1702
C1723
IC105 IC122 R338 R339 R364
IC118 IC116 C319
C321 C324
C325
C1109 C322
156
104
4 C323 53
156
4
11
C320
5
R32
C332
5
C311
104
R323
53
C1108
157 208
208
105 105
F302
F308
157 C1173
C1162
IC117
C1164
52
C1169 R401 52
F1101
1
F1107
IC1103
7
C335
7
IC1103 C310 4 R362

R1162
R1164
C1163
5
C1166 5 R356
C1107
C309
C1165 C1167 R330

R1163
IC124
C336
C1168 R347
1
C341
IC302 IC119
C338
C337
7
7
R379 R318 R317 R375
C1106
IC302
R931
C344
KN1708
R924
C349
C342
C345
R933 R942 R947
R921 R37
R949
R930
C350
C936
C351
C352
C946
R951
R928
156
C935 C938 C947

R404
IC107 IC106
R405
R943 R950
156
11
IC304 R939 R964 IC304

C948
C916 157 208

208
192
C358
129
193 F910
R906 157
192 129 C364 C365
C362
E
C931
R370
ID LABEL
R963
193
C363
128
C901 C366 C367

128 C361
R346 R369 R363
IC108
R962
R372
R310
C930
C923
IC903
C915
R907
IC903 IC114
R961
C904
R573
R568 R559 14
C921
R960
R959
4 C541 C537
IC111 C547 C533 R197 R198
IC505
C905
IC505
C920 C929
3
C526
1 36
C919
IC102 36 1
1
IC901
144
R583
37
IC901
144
R958
48 25
C928
37 1
X901
C918
R584
C527
R911
R540
C927
R955 R956
R957
R539
C554
R910
C917
C528
65
256
65
R586 C555
C926
R541
C932 256
R916 1 64
R915
R542
64
C556
1 R954
R908 R914
IC121
R948
R923 R932
F908
R571
109
R570
R925 R941
F902
C544
109
72 24
72
IC902 IC113 1
R944
R543
IC902 73
C529
R929 R937 R940 73 108108

C552 R561
C908
X501
R555 R554
C557
IC109 R574
F506
R569 NP
F C907 R560
F514
R905
1 5
5
1
F907
C5020
4
C561
3
F515
F507
3 4
KN
IC507 IC507
17
C558
C559
F901
C560
A
06
C906 KN17
68 DVJ-X1
1 2 3 4
5 6 7 8
5 Q CN4501 Q CN4506 SIDE A

CN1703 CN1702 A
CN701
PRE DC
MAIN C
MAIV DC
PRE C
CN1703
PRE V
PRE Y
GNDD
GNDD
GNDD
GNDD
GNDD
GNDD
GNDD
GNDD
GNDD
CONTACT SIDE CN1702
LOUT
20.MAIN V
Y
B CN2007
C CR
C CB
5.GNDD
1.GNDD
CONTACT SIDE CN701
15.GNDD
CY
10.MAIN
17
30 1 1 17
1 1
40 40 2
2
W_MUTE
CONT2
CONT1
30.VL OFF2
ROUT
39 1
25.GNDD
R1769 39 1
R1762
D OUT
MODE
GNDD
GNDD
GNDD
R1770
SOUT
R1766
R728
R772
SCLK
R702
R717
R714
R716
R721
R723
R730
R732
R748
R746
R778
5.GNDD
1.GNDD
KN1703
RXD
R764
XCS
15.GNDD
TXD
R756
10.SRDY
SIN
C1526
R1754
R1747
R1753
R1748
R1746
R1749
R1750
R1751
R1752
3636 19
19
C1729
IC1501
SYNC IN
C1637
R701 R712 R719 R727 R743
CN1702
17.GNDD
R776
R744
R753
18 VR1501
C727
R707
R1548
11 IC1504 R760
54
18 R710
54
7 5 R704
1
7
5
C1549
636 R1550
R703
C730
C731
C1510 R1516 C1531 C1550 R1547 C1564
C1561 C1551 R1546
R1512
R808 R813 R814
C740 C736
Q1503 C1558 C1562 C1563 C1565
R718
Q1506
C737
1 4
4
1
575
36 Q1501 R749
19
19 Q1502 C1529 C1548 R750
C1532
C1523
Q1504 R788 R816
IC1505 R785 R809
C1559 C1560
IC702
R783
27
1818
C742
1 81 R1536
120 C729
B
120 81
C1570
C1571
R798
C1576 C1569
C728
C1581
54 28
27 1
28 54
R820 R819
121
R1562
1
R1563
121
80
80
R1565
C739
C741 C738 C732
Q1512 R787
R1567
C1582
R799
R1574
R1575 R800
R811
C733
C1578 IC1511 R1578
R827
C1585
R1580 R806
4
R1582
C1594
R807
C1595
36 R1590
R822 R821
25
24 R1592 R801
R1572 R792
37
R1571 R1593 R818

C1596
IC703
R1598
R803
160
C1577
41
41
R1570 R810
13
C1609
48
R829
27
28
R1569
28
160
27
12 IC701
11
R705
R1559 4040
R708
C743
R711 R759
C1614
C1573 C1617 F1502 R795 R805

R782
R1601
C1607
F1506
C1606
R797
R740
C1176 C1177
C1615 C1616
R758
C1618
R1616
C347 C354 C355

R1604
R1602
C1608
R1615
R737
R736
R1607 R790 R802 R830 R823

R1165
IC1702 R1732 C1735

R706
R769
R739
44 R742
KN1707
R344
F1701
R1710
F1707
C1733
C1715
C1734
R353
R350
A
C1180
R322
5
C312
R358 C357
R1720
R345
1
C339 C343 R563 C
208
208 C333 C360

C1731
11
77
C1732 104 104 53 53

IC301 C710
C1178
105
105
5
5
52
52 C530
C331
4 C535
F702
F705
C1179
C534 C525
1
1
8
8 R395 144
144 109
3 1
1 R392 IC506
109
3
C330
108
C518
1
R1166
B C369 108
1
4
4 5
R580
5
R391
C548
4
C329
C1170
R389
C376
C375
A
C519
1
R388
5
R581
2 R582
C520
2 1
R387
1
C328
C550
R1160
C1174
C1175
C522 C521
C374
C373
4 R386 C551
C327
3 4
3 X1701
C549
R385
157 R577
157
VC1701
C326
56
R578
C371
F503
C372
156 R384
7373
C1183
F511
36
156
36
1
1
C523
7
7 1
R383
156 37
37 72
1
208
157 208
157 IC305 C545
C334 IC504 7
R579
C359
7
F1111 C340 1
R1745
R1714
C346 C348 C353

5
4
F1105 4 IC1108 5 R321

C1184
C515
R343
IC101
R365
R205
R352
R145
C1739
R1744
C543 C540 C532 C531

R351 R348
R326 R336
4
C542 C536 R551 R545 C516 4 5

R139
D
R381
R319
C514
R111 C125 C539 R558 R552

C1738
R160
C140
R156
R206
R200
WARNING
IC122
C133 C126
R199
C108
IC105
D1702
C1723
R212
R213
C157 C154
IC118
IC116
R364 5 C161 R201

THIS PRODUCT X101 4 4
R129
C324 1 1
C325 4
4
C159 C171
1
R135
3
CONTAINS LEAD C101 3

104
C323 53 R324 5
C158
15 C122 C160
14
53
To Remote
14 4
IN SOLDER AND
1
C114
1 3 4
1
CN102
R331
CERTAIN ELECTRICAL IC117

52
52 1 3
11
5
5 88
PARTS CONTAIN
5 4
1 3
CN102
1.TXD
8
R335
CHEMICALS WHICH ARE R167 R164

R217
RXD
KNOWN TO THE STATE C146
IC124
R325 V+5D
R207
R223 C167 3 1
F110
C370 OF CALIFORNIA TO 208

R170
C169 R222 5 NC
C338
C337
R382 157 R126

CAUSE CANCER, BIRTH C168 IC119 4
156
R171 1 5.NC
R107
R103
DEFECTS OR OTHER L101 C163

6.GNDD
R311
R178
REPRODUCTIVE HARM.
66
C113
C342
C345
HEALTH & SAFETY CODE

C151 C150 C149 C148
C109
R179
R374
SECTION 25249.6
C110
PROPOSITION 65
1
CN101
1
R102
C116
C351
C352
1 3 1
R320
3 R180
IC106
C121
IC107
CN101
R181
R159
4 5
R106
5 4
11
R373
IC304 R128 C120

R182
208
208
25 24
25
24
157
C138
R115
C365
C117
E
R370
R183
C366 C367
R144 R149 R154
C152
R369 R363
C137
IC108
R116
15
R372
R185 R184
7 1
15
105
52
7 1
C128
R117
R202
C156
R211
C129
IC114 53
C102
48
48
14 1 C145
14 88 C141 C123 104
IC111 C134
C533 R197 R198 R210
8
8
14
R142 R168 R165 R162 R161 C130 R141 R136
C155 R147 14
C526
1 IC102
C135 C131 C127
1 R151 R152
1
144
144
54
48 11 7 54
1
25
7 R157 R150
C132
F112
C165
C527
R540
R539 F107
C136
C139
C528
R541 R220
SECOND R229
R542
R158 R232
IC121
109 R508 R507
CN501
109
1 24 IC113
27
R543
27
28
28
D508
C529
108108
E CN2502
IC109
R555 R554
C144
C501
KN1704
D506 D504 D502

0
1 5 MAIN ASS'Y F
13
13 1 1
DWG1570-
SDDAT1
SDDAT3
SDDAT2
MMCMD
XMMCD
MMCLK
F507
3 4
CN501
V+3D3
SDWP
GNDD
13.GNDD
10.MDT0
5.GNDD
1.GNDD
CONTACT SIDE
DNP2075-A
A
KN1705
CN501 (DNP2075-A)
DVJ-X1 69
5 6 7 8
1 2 3 4
SIDE B Q CN4505
CN1701 C
A
A MAIN ASSY 2 40
FIRST
1 17 1
C5052
R1765
C5055
B CN2007
C5054
1 39 R1526 R1520 R1528 R1767 R1764
C1728
C1724
CN701
IC1705
C1727
R1715
IC1705 R1768
Q1507
Q1508
Q1505
R1529 R17
R1639
Q1508 Q1505 Q1507 R1530 C1726
C5005
R1638
C1530
C1509
C5058 3 91 63
1 VR ADJ
R1642
R1519
R1577
Q1516
710mV
C5018
5
R771
R770
4
C1583
R779
R763
R762
R761
R755
R754
R747
R745
R731
R729
R724
R722
R720
R715
R713
C744
C1538 F1508
TP2
Q1515 R789 R752 R709 Q1515 81 1
C746 F1504
45
F703 5 7
R1641
Q1521 Q1518 R1584
R766
R767 R735
R781
C745
R733
C1537
Q1519 C1536 R1537 C1572 C1533
IC1503 IC1503 R1511
16
F706
F707
1
C1539
C726
R725
Q1517 Q1523 C715
R1640
4 1
F701
F704
Q1510 C723 Q1510 R1513
R765
9
R1555
Q1513
R1568
R1558
R780
C706
C707
C734 C709
Q1513
C5051
R817
R1553
R1551
R791 C1535
F1507
C1504
R796
R786 R151
C705
R1527
IC1312
R1532
C713
R151
R1554
R1552
81 120
IC1310 F1503 R1564
C703 C1513 C1518
45 82
1 72
B
C702
IC1508 C724 C722 1 IC1508
R812
C1528121
R804 C1512 C1522
08
C1597
50
C721 R784 36 R
R824
C735 R
C701 25
R734
R815
R768
C1600
R828
37
R775 C
24
C712
C708
C718
R751
R1521
R826 R825
C704
C714
IC1308
13
R774
C1610
R757 48
R793 1
12
C717
R794 IC1502 R1518 F150
IC1502 IC1513 IC1507 IC1306
061
R773 R1517
14
C1599
C1628
C1503
C1521
82
72
C719 25 26
R1600
C1527
R1522
R1523
R1608
C725 04 1
C1627 F1
C5017
R1505 C1506
C720
C716 IC1514 R1603
IC1514 R17
C1717
R1735
R1736
5 4 R1637
R1597
C1501
R1501
R738
1 3
27MHz
VR ADJ
IC1509 R1635
IC1707
IC1509 R741 C1590 9 8
R1734
R1729
IC1706 IC1707 F1509 IC1706
C1635
R1631
R1503
C1505
R1636 R303
R337
R334
F312 R1728 C17
C306 1 F303 C302
IC1302 IC1304 16
F309
TP1
R329
F1510 8
C356
IC307
C305 F306 1
R366
R359
IC307
C5090
C1598 R327 5
C F305 C301 8
5
F504
1
5
7
104
C378
1
53
R394 R368
501 4
IC1102
C304
5
4
3
4
F311 1 49 16
25
C5057
IC306 F512 C553 R301 C377 IC306 R328
C303
C5007 R308
R396
8
109
4
3
144
C1736
C318 1 3
54 R302 28 R316
R393
R315
801
C5089
1
5 4
1
R1733
R314
C5008
F1716
R390
R313
C1711
1 2
IC303 IC303 C1741

C5076
1 27 4
C1740 3
IC1105 C313 C316 1 7
C1742
C5010
C1743
IC1101 C314 C315
C317
R1740
C5009
4 5
R307
R342
R341
IC1708 R306
63
651
R349 R332
1
1
37
7
R1706 IC1708
27 73 802 751
C1712
IC1704 IC1704 C1185
C512
1
7
R367 F1717
5
R572
C546
4
F502 R357
C513
5
F510
D C1182
F1112
R399
C5073
C5077
F1106
1 4
R1709
R1708
Q1701
F109 53 R378
R101
F101
C162 R397
41
Q1701
C5003
F105
1 20 R215
25
8 R234 5 R172
R174
R216
1
C5006
R235 R173 R225
8
7
CN102
7 1 R226
R233
R230
10 IC120 11
IC120 IC907
R236
R188
R187
8 14
C111
R196 R195 R194 R193 R192 R191 R190 R189
IC123
6
IC123
C170 C115 R155
C368
R175
R131
R130
R177 F310
R169
1
F304
R105
R109
R110
CN101
R104
R121
802
R114
R113 R120 R124 R125
R138 R143 R148 R153
42
52
R122
IC906
E
51
R132
1 7
R108
R140
R146
R137
R133
84
1
C106
F108
8 41
14 8 F106
IC115
C105
IC104 IC115 IC110 1

F102
IC112
IC104 IC112 IC110 IC908 10 1 10 1 10 1 10
IC103 1 IC103 54
C104
C147
C153
45
7 1
1
C142
C164
C119
R119
C118 C112
11 20 11 20 11 20 11 R118
20
R127
C166 C5070
C107
R112 R163 R123

R204 R203 R186 R176 R166 R134
E CN2502
F509
R214
R523
R524
R509
R514
R513
R517
R516 C517
R510
R521
R520
IC904
CN501
C5016
R522
13
IC905
82
72
24 28
C124
C5002
C508
27
R518 25 12
R515
C503
F111
C507
R512
C5004
F
D503
D501
D507
F104
C5015
D505
36
R511
1 13 1 C103
37 48
R502 R503
F508
R505
F501
C504
R506 C502 C505 R504
A IC503 R501 C506 IC503
70 DVJ-X1
1 2 3 4
5 6 7 8
Q CN4505 Q CN4501 Q CN4506 SIDE B

CN1703 CN1702 A
1 30
C5038
R1765
C5037
R1767 R1764
R1768 C1710 0 1 A
R1763 R1633 01 1 B
R1703 0 1 2 3 0 1 2 3 4 5 6 7 8 9
R1634 C
C5005
C5019 0 1
R1589
C1530
C1509
Q1516
91 63 C1525
C1524
C1520
C1519
C1516
C1515
C1709
R1630
R1614
R1613
R1595
R1587
R1621
R1588
C5039
Q1515 81 C1707
R1534
Q1518
C5012
R1641
C5040
R1531
C1533 Q1519 Q1521

R1511 C1383
Q1517
Q1523
IC1503
R1596
16
1
C1373
C1508
C1502
R1502 C1708
R1504 R1611 C1375 C1374 C1372 C1371 C1385 C1384 C1382 C1381
R1640
C1623
R1513 C1546 R1632
91 63 R1620
8
27 27
C1514
C1580 1 1
C1634
C1624 R1625
82 45 82 45
R1609
C5041
R1514
C1621
IC1312
C1556
IC1310
C1555
81 1
R1527
R1532
C1568
120 R1515
C1513 C1518 C1620

C1632 72 1 72 1 B
C1528121
C1512 C1522 28 54
C1584
R1525 C1586 28 54
C1361 C1360 C1365 C1364
8
9
R1524 R1585 C1343
25 C1357
C1347 C1353
R1556 R1560 R1545 C1589 C1346 C1345 C1344 C1356 C1355 C1354
R1617
R1618
R1624
27 27
1
61
C1588
24 C1567 C1579 C1545 1 1

R1561 R1573 R1549 82 45 82 45
IC1308
R1521 25 36 C1587
13
73
42
1 IC1306
12
C5043
IC1502 R1518 F1505 C1631
C1541
IC1507
061
R1517 IC1513 24
C5042
C1599 13 72 1 72 1
C1503
C1521
31
84
R1623 C5085
21 1 54 54
R1566
C5086 28 28
R1600
C1527
R1522
R1523
C1337
R1608
1 C1511 C1333 C1332 C1336

R1583 R1581 R1576
F1501 R1510 C5091 C1329

R1505 C1506
C1319
C1601
R1509 C1629 C1318 C1325

C1317 C1316 C1315 27 C1328 C1327 C1326
27
F1104
C1507
F1110
R1725 1
C1717
R1735
R1736
12 1 1
C R1507 45 45
C1501
R1501
C1611 R1579
82 82
R1508
27MHz
VR ADJ
R1591
IC1707
R1506 C1630
R1734
R1729
IC1706
R1631
R1503
C1505
IC1302
IC1304
R1104
R1728 C1725 C1128

TP1 R1156 7 1
1 1
C1105
72 72
1
R1153
R1123
R329
R1120
8 54
C5044
1 52
C356
IC307
1 R1154 R1142 R1143 28 28 54

5 C1308
802
8 C1120
C
35
C1309
1
5
C1305 C1304
28 8 14
27
C5046
IC1102 C1111
5
4
3
4
C5045
1 49
R1136
16 C1101
328 R1718
308
1
R1122
8
4
3
R1733 C1736
318 1 3
R1146
316
R1704
C1737
1
C5001
5 4
C1114
F1716
R1126
R1133
R1167
C1711 C5047
1 2 C1104
R1121
C5083
R1140
C1741
53 R1119 104
4
C1740 3 C1102
C1721
C1116 C1115
501
1 7 54 1
3 1
4 5
C1117
C1742 R1743 IC1105

25
IC1101
401
C1743
751
R1148 R1138 R1135 R1131
R1740 R1741
R1141
R1124
651 R1168 501

4 5
1
R1170
7
IC1708
R1125
R1706
C1704 C1185 R1169

R1155
C5011
17
5
C1181
R1149
C1182
D
F1112
R1151
R399
F1106
R340
651
4
1
53 R378 104
R397 R312 F301
802 R1161 751
C308
501
F307
25
C307
7
C5006
R360
1
4
C5049 C5048
C982
R354
R361
C983 C981
R398 IC907
7
1
C984 C980
R355 27 1
F911
R371
C368
C5013
F905
C5050
C987
C966 28 54
R952 C978
651
C977
1
28 R953 R946
802 751 C5079 27
R966
R965
129 R945 R927 192

IC906
R967
C961
R926
391
821
E
C976
R935
C958
C954
C965
R920
R934 R901
C955
C975
C956
F906
5
C5024
8
C5078
C985
C974
C950
R919
R912
C973 C922
C964
1 4
IC908
C909
C949
C972
C963
1 36
R902
73
C971
441
54 1
C970
C941 C940 C939
1 C962
54 C969
C944
C945
C937
C924
C968
C934
C5070
C925
56
C951
652
C933
C967
C959
C960
F912
C957
46
C953
C952
R585 1
C942
R938
R917
R922
R936
C5014
F904
R918 C913 C912 C911 C910
901
IC904 C979
27
IC905
F505
27 1
801 37
C914
R562
C538
27 28 C986
C943
F513
C524
F
C5015
C5080
F909
F903
4
28
3
C5084 54
R904 C903 C902
(DNP2075-A)
A
DVJ-X1 71
5 6 7 8
F
E
B
A
D
C
72
B
B
SIDE A
1
1
Motor
Q CN4507
D CN2401 To Pickup Assy C CN2404
CN2005
To Loading
4.2 DVPL ASSY
CN2002 CN2001 CN2003
W
U
HB
HW-
HW+
HV+
HU-
HU+
GND
Contact Side CN2001 CN2003
INSW
CN2008
Contact Side
5.HV-
1.VCC
C2208
DOWN
C2209
1.GND 15.VRCOM Contact Side
DVPL ASSY
10.V
UP
C2303
R2129
R2106
R2108
DOWN CN2002 RF- VR780
Q2002
R2011
Q2001
R2010
Q2001 CN2008 CN2001 GND GND
Q2002 C2020
RF+ 780LD
26 5.VCC MPD
4
26 11
C2304
V+5S 13 1 C 20.650LD
C2001
C2023 B GND 1.ST2+
GNDS
UP
2.ST2-
C2221
PDSW VSHF
C2000
C2213
C2133
R2109
R2222
3.ST1-
C2126
GNDS E T-
L2300
R2006
40
C2136
C2134
C2216 C2214 10.F T+ 4.ST1+
1
Q2201
V+ C2315
C2021
Q2201 A 25.F+
C2212
R2301
12S C2215 Q2003 R2111
Contact Side
D F-

Q2003
R2110
R2002
R2212
R2213
R2204
R2128
R2102
R2101
X2100
C2108
2
2
C2022 12 1 VREF
C2154 C2016 R2001 C2109 VR650
13
48
R2223
R2220
R2216
C2220
C2219
C2218
R2217
C2014
R2130
C2202 C2138
C2305
R2103
C2008 R2107
R2104
C2015
Q2202
C2110
C2107
C2007
Q2202
C2002
C2106
24
C2306
C2013
C2207
37
36 C2104
PCB
25 C2105
C2139
C2137
C2006
CN2007
45
CN2007
C2004 32
IC2000 CN2004 IC2000 17
C2003
89
R2005
R2004
C2012
8888 45
R2202
11
44
A CN701
89
LPS1 44 R2140
C2146
R2114
KN2002
C2112
C2005
GNDD CAUTION C2117 C2113
C2115
C2114
1 2 3
R2203
R2201
R2115
LPS2
C2111
27 1
C2011
C2009
R2112 C2116
C2322
C2323
REPLACE WITH SAME C2103

PC
C2121
R2003
C2010
IC2100
DVJ-X1
IC2101
IC2100
IC2101 CN2005 C2124

TYPE NO.466.125 MFD.
C2143
C2102
1
BY Littelfuse.Inc. C2120
C2125 C2122
1 16
C2118
R2113
C2119
EMP FOR IC2303
IC2200
C2135
C2320
IC2200 IC2300 F2301 C2140
R2105
C2300
IC2300 R2310 C2101
C2149
R2120
54 R2205 C2123 C2127
1
28
1
C2204
R2100
132
1
C2206 R2206
C2313
133 176
IC2303
C2302
132
R2207
466.125
IC2303 176
4
5
3
3
R2300
R2134
C2141
C2205
C2301
R2208 133 C2129 C
C2211
21 C2100
C2210
R2210
C2131
R2214
KN2001 R2133
IC2301
42
C2128
C2132
IC2301 C2203 C2152 R2132

C2130
C2151
IC2302
R2305
R2215
IC2302 L2116
R2136
R2150
C2150
C2147
R2156
R2155 C2148
R2152
R2117 R2154
C2312
C2321
R2163
R2302 R2121 R2153
R2303 C2310 R2127 R2151
C2307
R2304 R2123
R2306
C2309
C2308
R2124
R2137
L2102
DC FC R2135
L2110
L2111
L2112
L2113
L2114
L2115
L2101
L2103
L2104
L2105
DWX2341 DVPL
L2106
L2107
L2108
L2109
(DNP2076)
115.5 130.5
CN2004
4
4
T CN4701
B
SIDE A
B
F
C
D
A
73
SIDE B
B
8
8
Q CN4507
CN2008
FEPEN
FBAL HU+ HW+ INSW LOAD
EC FEPCK VFOSHORT HV+ HB V FG
F+
6LD T+
7VRSW 6VRSW V+5S
OFTR
4
6VR 7VR
PDSW U W
FEPDT 7LD F- GNDS
T- GNDS
MPD HU- HV- HW- V+12S
1
A D
CN2008
F B
VHALF VA5V
GNDD REMO
7
7
REMI VD3V GNDA
C
RF+ VREF1
ATTENTION
CN2004
VA3V RF- E NARF
XRST
ARF
RFENV EN CAS DE LPS1
1
REMPLACEMENT GNDD
DVJ-X1
DES FUSIBLES IC2303 GNDR LPS2
3
VREF BDO
N'UTILISER QUE
FE LA REFERENCE EMN
CN2005
RFAS 466.125 DE CHEZ
1
GNDD XDMUTE1
DRAMVD1R5
Littelfuse.inc.
TE EMP
XDMUTE2
IC2302
VD3V
SPGAIN
CN2004
GNDD
6
6
FEDRV
TEDRV ST2
VD1R5
ST1
ST2- ST1-
B DVPL ASSY
(DNP2076)
LF YG-M4 ST1+
DWX2341 DVPL ST2+

To Loading
CN2005
T CN4701
Motor
5
5
SIDE B
B
1 2 3 4
4.3 SPCN, STCN, INSW, SLMB and SDCB ASSYS
SIDE A SIDE A
A
C STCN ASSY D SPCN ASSY

CN2401 B
Contact CN2002
CN2405
Side
STEPPING
YG-M4
4 MOTOR 13 1
1
CN2401
DOWN
Side
CN2402
CN2402
DWX2342
B
SPINDLE
UP
MOTOR
STCN
Side
CN2404
DWX2343
Contact
CN2404
SPCN
B
CN2403
(DNP2076-A)
2
CN2003
1
(DNP2076-A)
C T SLMB ASSY
F INSW ASSY SLOTSW
SLOTSW
OPEN SIDE
S5001 S4
70
INSIDE 2
SW
YG-A3
R
2 1
2 1
S4
70
CN5001
CN4701
CN5001
DWS1344
3
1 2 3
D CN4701
SLMB
1
1.LPS1
(DNP2079-A) 2.GNDD
3.LPS2
B CN2004
(DNP2078-A)
E SDCB ASSY
R2510
YG-M4 R2509
CARD IN SW
E CN2501
R2504
S2501
1 3
13
R2508
CN2502
C2501
C2502
R2507 R2501 A
R2505
CN501
1
R2503
R2502
CN2502
R2506 Contact
R2511 Side UP
SDCB DWX2344
F
(DNP2076-A)
C D E F T C D E F T
74 DVJ-X1
1 2 3 4
5 6 7 8
SIDE B SIDE B
A
C STCN ASSY D SPCN ASSY

CN2401 B
CN2002
DWX2342
CN2405
DWX2343
SPCN GND
YG-M4
LF
YG-M4
CN2402
STCN
LF
INSW
CN2404
B
CN2003 (DNP2076-A)
(DNP2076-A)
F INSW ASSY T SLMB ASSY C
SLOTSW
SLOTSW
S4702
YG-M2
DWS1342 S4701
INSW
SLMB CN4701
3
CN5001 CN4701 D
LF
1
3.LPS2
(DNP2079-A) 2.GNDD
1.LPS1
B CN2004
(DNP2078-A)
E SDCB ASSY
S2501
E
LF
DWX2344
SDCB
CN2502
CARD IN SW
YG-M4
F
(DNP2076-A)
C D E F T C D E F T
DVJ-X1 75
5 6 7 8
4 3 1 2
DVJ-X1 76
G I
F
M CN3401
IC3003
CN3001
CN3001
W3002 W3001 16
1 DWG1582 DWG1583 1 16
S3011 S3024
S3019 S3020 S3021 S3022 S3023
AUDIO DELETE MEMORY MENU T.MENU SETUP RET
MT
KEY4 W3015 W3011 W3007

GNDAD W3006
W3016 W3012 W3008
W3019 V+5AD GNDAD
VOL0 GNDAD E
W3023
W3022
TRESL
VOL1
W3017 W3013 W3009

W3024
GNDAD
W3025
W3027
W3026 VINYL
W3021 GLOAD GNDAD VOL0

W3018 W3014 W3010
W3028 VLDMFL V+5AD GNDAD
GNDAD 3 2 1
22
W3041
W3040
SRDY
22
W3044
GNDD
FLAC1 S3026 VR3001

JOGX2SW
S3004 W3042 S3005 S3006

JOGX2LED
S3003 1 IC3003 FLAC2

W3020
W3049
W3048
GLOAD
TXD
W3045
UP
W3046
ELOOP EM RELOOP LPCALL

TOUCH/BRAKE
S3025 S3027 ENTER

GNDD
VLDMFL
W3038
0 V+5AD
W3043
GNDD
V+5D GNDD W3039
L3001
W3070 VOL1
GNDD
FL_SDO
W3176
W3066
FL_SCLK
LEFT RIGHT
JOG2
W3067
CN3002
S3028
W3047
FL_LAT
1
1
JOG1
J_SDO
SIN
W3068
VINYL
GNDD
FL_BK 3 2 1
J_SCLK
FLAC4
W3065 VR3002
JOGX2LED
V+5D
JOGX2SW
GNDD
W3071
W3069
W3072
GLOAD
V+5D
GNDAD
W3101
CN3004
VLDMFL
GNDD DOWN
W3062
W3078
W3074
D
TRESL
W3073
MT
V+5D
W3108
W3111
W3109
W3110
W3107
GLED
W3106
W3104
9
W3079
W3093
1
ADCT
W3077
ADIN
KEY4A
SOUT
SCLK
C3002
XCS
RELEASE/START
W3102
C3004
W3076
W3075
W3103
W3097
GLED
V+5D
VLED
W3064
1
1 1
W3105
W3100 GNDD
CN3004
W3099
W3096
W3063
W3094
W3092
W3098
W3095
TCH
CN3003
C3047
JOGX2
GLED
VLED
CN3002 S3032
CN3003
W3129
D3021
GNDD
W3130
O CN40 Q CN4503 V+5D
D3003
JOGMODE C
S3029
D3003
D3020
1
D
T.RST
D3016
S3201
1
S3030
S
D3205
W3148
W3147
W3146
CN3201
W3145
D3017
ADIN
ADCT
9
GNDAD
V+5AD
CN3201
TEMPO
9
W3151
B
D3018
S3031
M.TEMPO
VR3201
D3019
SLDB ASSY I G DIPB ASSY
A
SIDE A
4.4 DIPB, SLDB, RSWB, LED1 and LED2 ASSYS
4 3 2 1
B
F
C
D
A
77
G H I J K
SIDE A
(DNP2077-A)
RSWB
ASSY
8
8
J3006
D3010
1.GNDD
DWS1346 S3009 S3007
S3008
2.SW0
D3006
C
A
RSWB
1
J3101
D3009 D3007
J3006
D3005
REV
1
FWD
T REV
D3010
D3008
S3018
D3006
H
J3006
(DNP2077-A)
S3101
D3024
D3023 D3022
W3141 W3061
GLED GLED
DWG1579
W3140 W3128 W3060
T FWD
1 J3006 V+5D VLED
S3017
VLED
D3303
J3303
GLED
D3008
W3139 W3127
1 W3144 GNDD
GNDD W3091
(DNP2077-A)
W3126
GLED
VLED
D3011 W3125 GLED

J3302
S3010
REC
DIPB
GNDAD
W3143
KEY1
SW0
7
7
LED2
GNDAD
KEY0B
W3138
GLED
VLED
VLED
W3037
W3036
W3124 GNDAD
LED1 ASSY
W3135
W3134
1.FLED W3137
W3122
W3121
W3123 KEY0B
S CN4201
LED2 ASSY
GLED D3012
1
J3302 CN3005
D3013
1
TMODE
S3016
CN3005
J3302
DWG1578
DVJ-X1
W3005
1
1.FLED
LOOP IN
2.GLED
9 1
LED1 9 1
S3001
2.GLED
1
J3302
W3120
W3090
DWG1575
GNDAD
CN3301
D3301 1 5 5.GLED GLED
W3119
TEX/WAV
4.NC
3.NC VLED
W3118
S3015
2.NC
1 5
KEY1
1.VLED KEY0A
GNDAD
W3089
VLED
W3117
W3088
CN3201 SW0
W3116 W3087
W3035
J
ADIN
W3115 W3086
W3058
W3057
W3034
W3033
K
W3177 ADCT W3085
DISPLAY
REVERSE
W3059
6
6
S3014
GNDAD
W3004
LOOP OUT
S3002
DWG1580
W3032
KEY2
D3014 W3031
CN3202

D3015 KEY3
VR3202
ADCT
W3030
8
VOL0
W3150 X3001 W3029
VOL1
CN3202
1
1
1.GLED
5.VLED
ANGLE
S3013
W3003
W3084
2.NC
3.NC
4.NC
W3056
SRDY
V+5D
W3055 W3054
ZERO POINT ADJ

V+5D
(DNP2077-A)
V+5D
DWG1581
W3083
DWS1347
W3114 W3053
W3082 C3011
SLDB
GNDD
5
5
GNDD XRESET W3052
W3149
W3081
GLED
STITLE
CNVSS XRESET
S3012
W3080
O CN4001
W3051
13
W3050
W3113
FLAC3
RELOOP
W3112
13
S3003
FLAC4
CN3003
CN3003
W3111
V+5D
GNDD
JOG1
IC3003
GNDAD
W3110
JOG2
AUDIO
S3011
W3109
W3002
1
J_SDO
W3028
W3027
IC3003
T.RST
W3108
J_SCLK
DWG
1
W3106
GNDD
EM RE
1
W3176
S3004
TCH W3104 VLDMFL
W3105 W3026 VINYL
GNDD
W3079 GLOAD
5
F
E
B
A
D
C
78
Q3011
Q3016
Q3010
Q3003
Q3017
Q3006
Q3005
Q3018
Q3020
Q3007
Q3002
Q3009
Q3019
Q3012
Q3201
Q3013
Q3014
Q3015
Q3004
IC3001
IC3007
IC3002
Q3008
IC3004
IC3006
SIDE B
1
1
H
RSWB DWS1346
2.SW0
R3033 R3034
C
1
MANUAL SOLDER
A
B
S3009
K
C3019 1.GNDD
S3007
S3008
(DNP2077-A)
D3007 D3009 R3035
J3006
C3022 D3005 Q3003 Q3005
J3006
ASSY
RSWB
R3061 R3063 R3065
S3101
FWD REV
REVERSE
R3085 R3089 R3093
YG-A3
LF
Q3007
G H I J K
Q3006
R3064 R
S3018
R3062 R3066
T REV
R3086 R3090 R3094
Q3008
R3043 R3087 R3091 R3095
J
J3006
D3022 Q3004 D3023 D3024
D3008
D3010
LED2
R3088 R3092 R3096 GLED
D3006
ASSY
0
GLED V+5D
VLED
GND
Q3017
SW0
1
1
Q3016
Q3018
D3301
0 1 2 3
VLED
J3006
GNDD
S3017
GNDD
D3011
T FWD
GLED
D3303

R
C3301 R3301
R3042
2
2
Q3009 C3302
GLED R3076
VLED
D3304
GLED
C3036
S3010
D3302
REC
YG-A3
R3302
YG-A3
R3097
C3034
R3067
0 1 2 3 4 5 6 7 8 9
SW0
LF
LF
KEY0B
B
A
C
GNDAD
LED1
CN3301
VLED
GNDAD
1
LED2
KEY1
GNDAD
KEY0B
DWG1578
J3302
LED1 ASSY
GLED
VLED
DWG1579
J3302
GLED
R3009 C3012
C3016 R3013 R3014
Q3010 R3050 C3025
1
1
R3026 R3044 C3023

G DIPB ASSY
DVJ-X1
5
R3036 C3020
S3016
MMCL
CUEL
1.VLED
TMODE
VLED
R3032 C3018
1.FLED
1 9
2.GLED
KEY1A
KEY0B
KEY0A
2.NC
D3012
1.FLED
1.GLED
5.PLAYL
9.GNDAD
R3068 3.NC
CN3005
2.GLED
R3041
J3302
4.NC
S3001
CN3005 5.GLED
CN3201
GLED
D3013
CN3005
CONTACT SIDE
LOOP IN
R3069
GNDAD
J3302
VLED S CN4201
R3027 Q3011
KEY0A
S3015
C3032 R3113
I
3
3
TEX/WAV
SW0
R3040 C3033
ADIN
3
KEY1
ADCT
VLED
R3112
DIPB
GNDAD
GNDAD REVERSE
81 80
R3025 C3015 81
80 IC
VR3202
S3014
C3010 30
04
R3039
DISPLAY
3
GNDAD
CN3202 R3203
D3014
C3013
S3002
2
10
5
0 ADCT
R3028
0
10
LOOP OUT
D3015
C3207
KEY2 51
R
1 51
R3070 R3202
1
1
R3071
4.NC
1 3.NC
2.NC
R3015
CN3202
5.VLED
1.GLED
KEY3 50
50
R3020
SLDB ASSY
VOL0
J CN3301
R3016 R3106
VOL1 X3001
YG-A3
R3079
30 3
R3023
R3022
R3024
R3019
R3077
C3009
0 31
R3101
C3030 31
VR3201
R3105
R3107
R3102
SRDY
R3017
4
C3029 V+5D
4
R3083
GLED
S3013
R3012
V+5D
ZERO POINT ADJ
V+5D
R3098
ANGLE
R3100
R3080
C3042
R3021
R3018
R3078
R3038 R3082
LF
C3003 R3081
R3010 C3039 R3099 C3044
GNDD C3038
88
R3006 GNDD
11
XRESET
C3040 R3205
C3006 CNVSS C3041
XRESET
4
55
IC3006
C3005 C3011 R3206

R3108
S3012
1
6
STITLE
1
R3207
5
R3104 FLAC4
FLAC3 R3109
13
3
4
FLAC3
3
4
C3045
GNDD
V+5D
IC3001
FLAC4 JOG1
SLDB
LF
C3208
R3037
10.JOG2
JOG1
11
88
D3205
J_SDO
R3011
JOG2 J_BK S3201
S3003
RELOOP
IC3007 4
5
5
J_XSTB
1
R3111 J_SDO
V+5D
T.RST
Q3201
5.J_SCLK
S3011
CN300
GNDD
003
NDAD
AUDIO
J SCLK
N3003
DWS13
O CN40
C3040 R3205
C3006 CNVSS C3041
XRESET
4
55
IC3006
C3005 C3011 R3206
R3108
S3012
1
6
STITLE
1
R3207
5
R3104 FLAC4
FLAC3 R3109
13
3
4
FLAC3
3
4
C3045
GNDD
V+5D
IC3001
FLAC4 JOG1
LDB
LF
C3208
R3037
10.JOG2
JOG1
11
88
D3205
J_SDO
R3011
JOG2 J_BK S3201
S3003
RELOOP
IC3007
4
5
5
J_XSTB
1
R3111 J_SDO
V+5D
T.RST
Q3201
5.J_SCLK
S3011
GNDD
AUDIO
J_SCLK
GNDAD
TCH R3209
CN3003
IC3003
CN3003
VLDMFL
C3021 R3110 1.GLOAD
GNDD
1
O CN4001
CN3003
R3030 R3029
VLDMFL
DWS1347
VINYL GNDD TCH
GLOAD
JOGX2SW
5
5
EM RELOOP V+5D
S3004
JOGX2LED
C3201
L3001 SIN
2.ADIN
C3007
9.VLED
3.ADCT
8.GLED
4.V+5AD
5.KEY4A
7.TRESL
MT C3047
1.GNDAD
6.GNDAD
VINYL
1
5
1
TRESL VLDMFL R3007
JOGX2SW ADCT
ADCT
IC3002
3
3
4
CONTACT SIDE
4
D3201
JOGX2LED
C3024 GLOAD R3204
R3008 C3008 R3004 MT D3204
CONTACT SIDE CN3002 ADIN
TRESL
V+5AD
21 1 SOUT
(DNP2077-A)
ADIN

XCS
S3019
GNDAD
2
22
DELETE
KEY4
SRDY GNDD D3202
1
CN3002
9
R3045 GNDD SCLK
D3203
V+5D
V+5D
NC
FLAC4
GNDD
SIN
C3202
FLAC3
Q CN4503
CN3201
5.NC
1.SOUT
R3201
TXD GNDD CONTACT SIDE
C3204
CN3002
GLOAD
NC
FLAC2
SRDY
NC
GLED 9.SCLK
TXD
XCS
FLAC1
FLAC2
V+5AD
GLOAD
VLDMFL
C3002
C3203
22.VLDMFL
20.FLAC1
15.RXD
10.GNDD
GNDD
GNDD
2
GNDD
LPCALL
6
6
S3005
FL_SDO
V+5D
FL_BK
FL_SCLK
FL_LAT
V+5AD
GLED
GNDAD
S3020
MEMORY VLED
C3026
VLED
R3051
CN3201
R3031
S3025
C3004
LEFT
VOL1
GNDAD
GLED
S3028
DOWN
UP
S3026
R3046
R3047
DVJ-X1
R3053
R3052 ADCT
S3021
MENU
ADIN
S3027
V+5D
RIGHT
1
C3017
VOL0
GNDAD
V+5AD
GLED
CONTACT SIDE
ENTER
GNDAD
7
7
S3022
VLED
9
GNDAD
R3048
ADIN
S3006
ADCT
T.MENU
V+5AD
5.KEY4A
V+5D
GNDD
GNDAD R3003
VOL0
GNDAD
GNDAD
TRESL
GLED R3072 R3073 R3074
C3014
C3031
1.VLED
D3016
CN3001 D3017
CN3004
D3018
CN3001
1
R3075
Q3002
1.GLOAD C3046 R3005
S3023
VLDMFL 11.V+5D CN3004
SETUP
KEY3A R3059
FLAC1 KEY4A C3043
R3049 FLAC2 ELSW
D3020
R3060
VOL1
GNDAD
V+5AD
5.GNDD
D3019
M CN3401
D3003
C3035 FL_SCLK 15.TXD

RXD
Q3014
Q3015
Q3012
NC
Q3019
D3004
16
Q3013
S3032
FL_SDO
JOGX2
FL_LAT R3058
CN3001 10.FL_BK R3055
R3057 R3056
S3030
S3024
RET
S3031
VR3002
D3021
VR3001
TEMPO
R3054 C3037
C3028
R
M.TEMPO
GNDAD
JOGMODE
C3027
Q3020
S3029
TOUCH/BRAKE RELEASE/START
YG-A3
8
8
(DNP2077-A)
G I
SIDE B
79
E
A
D
C
F
B
1 2 3 4
4.5 MFLB, KSWB and EJTB ASSYS
SIDE A
A
M MFLB ASSY
MFLB DWG1576
MAIN FL
115.25
W3162
W3161
Q3401
V+5D
W3160
W3158
W3159
W3157
1 6 14
1
V3401
U EJTB ASSY CN3501
C3506
EJTB 1.RXD
W217
2.TXD 1 6
3.GNDAD 1 6 CN3501
DWS1348
W219
4.ELSW
5.KEY3A GNDAD W3501
W218
6.V+5D S3503
W225
S3502
S3501
1
E.LOCK 1
STOP
1.TXD 6
EJECT LOCK UNLOCK W3502 2.RXD
GNDAD 3.DTR
W3503 4.CTS
5.V+5D
6.GNDD
W3504
1 7.NC
7 CN3502
1
7
D
S KSWB ASSY
9
CN4201
K
9
DW
NEXT
CN4201
G CN3005 KS
A
W134
W133
W210
W147
D4202
1
FWD
S4204
W159
S4206
1
W211
E
D4201
W212
D4214
D4216
D4204
W214
W213
S4203
REV
PREV
S4205
K
A
M S U
80 DVJ-X1
1 2 3 4
5 6 7 8
SIDE A
A
CN3402
PC
4.GNDAD
2.KEY3A
3.ELSW
1.V+5D
6.RXD
5.TXD
1
CN3402
66
DC FC
C3401
(DNP2077-A)
11.FL_SCLK
9.FL_SDO
15.VLDMFL
3.GNDAD
8.FL_LAT
16.GLOAD
5.KEY3A
7.FL_BK
14.FLAC1
13.FLAC2
4.ELSW
12.GNDD
6.V+5D
1.RXD
2.TXD
10.NC
GLOAD
GNDD
VLDMFL
B
C3409
N FL
W3170
W3164
W3165
W3163
W3169
Q3401
W3166
C3410
E
W3167
GNDD
W3168
C3408
FLAC1
FLAC2 W3156 CN3401
16 1
94 96
96 16 1
CN3401
(DNP2077-A)
C
W220
C3506
W217
G CN3001
C3508
C3507
W219
C3509
1 5 CN3503
6 9
(DNP2078-A)
K
CARD
DWS1343
W131
KSWB
W108
A
D4213
W134
W133
D4209
D4202
PLAY/PAUSE
CUE
D4203
E
D4211
D4207
D4201
S4202
S4201
D4204
D4208
W130
K
W214
(DNP2078-A)
M S U
DVJ-X1 81
5 6 7 8
1 2 3 4
SIDE B
A
M MFLB ASSY
CN3402
CN3402
6 1
6.RXD
5.TXD
4.GNDAD
3.ELSW
2.KEY3A
1.V+5D
WARNING
THIS PRODUCT
CONTAINS LEAD
C3401
IN SOLDER AND
CERTAIN ELECTRICAL MF
D3401
C3409
B PARTS CONTAIN
VLDMFL
GLOAD
D3402
CHEMICALS WHICH ARE
Q3401 KNOWN TO THE STATE
D3403
R3409
R3408
GNDD
GNDD
OF CALIFORNIA TO
C3410 CAUSE CANCER, BIRTH
R3410
DEFECTS OR OTHER
Q3401 REPRODUCTIVE HARM.
E
HEALTH & SAFETY CODE
GLOAD
10.NC
11.FL_SCLK
12.GNDD
13.FLAC2
14.FLAC1
15.VLDMFL
16.GLOAD
1.RXD
2.TXD
3.GNDAD
4.ELSW
5.KEY3A
6.V+5D
7.FL_BK
8.FL_LAT
9.FL_SDO
SECTION 25249.6
GNDD C3408
PROPOSITION 65
FLAC1 FLAC2
1 CN3401 16
94
96
CN3401
U EJTB ASSY CN3501

C3505
16
16
11
A3
6 CN3501 1.RXD
GNDAD V+5D
R3507 2.TXD
R3503 1
3.GNDAD
4.ELSW
IC3501
R3506 5.KEY3A
C3502 R3501
V+5D 6.V+5D
9
V+5D
C3503
8 8
EJECT
STOP
S3501
S3502
R3505
1 C3501 E.LOCK
7.NC
R3504
2.RXD 5.V+5D
1.TXD 4.CTS
R3502
6.GNDD
S3503
EJTB
3.RXD
1.GND
4.DTR
2.TXD
5.NC
9 6
GNDAD UNLOCK LOCK
3.DTR
DWS1348
7.GND
8.NC
CN3502
LF
9.NC
6.NC
CN3503
7
1
D
S KSWB ASSY
PLAY/PAUSE
CARD
VLED
Q4203 D4210
GLED
C4205
D4202
R4207
D4209
R4206 Q4202
D4211 D4212 C4203
E
CUE
S4202
Q4
S4201
C4206 D4205
D4207
R4204 D4203 D4201

R4208
GNDAD
D4208
C4210
R4201
R4205
KSWB
R4203 D4204
D4206
C4204
R4202
M S U
82 DVJ-X1
1 2 3 4
5 6 7 8
SIDE B
A
LF
G (DNP2077-A)
MFLB DWG1576
R3401
R3405
B
RE
R3403
C3402
E
R3404
GNDD
H
R3407
FL_BK
FL_LAT
C3404
FL_SDO
.
V+5D
DE
C3405
R3406
C3407
R
C3406
R3402
YG-A3
6 1
14
(DNP2077-A)
C
YG-A3
1.RXD R
2.TXD
3.GNDAD
4.ELSW
5.KEY3A
6.V+5D
EJECT
S3501
3504
3502
CK EJTB
DWS1348
LF
D
(DNP2078-A)
CN4201
9
CN4201
R
YG-A3
CONTACT SIDE
9.GLED
VLED
G CN3005
FWD
MMCL
GLED
VLED
CUEL
5.PLAYL
D4202 KEY1A
GLED
KEY0B
NEXT
C4209 KEY0A
S4206
S4204
1.GNDAD
1
VLED
D4215
R4214 R4212 C4201

Q4201
D4217 C4207 E
D4214
D4201
DWS1343
C4208
R4209
D4216
GNDAD
GNDAD
R4201
PREV
REV
C4202
KSWB
S4205
S4203
GNDAD
D4204 R4210
R4213
R4211
LF
(DNP2078-A)
M S U
DVJ-X1 83
5 6 7 8
1 2 3 4
4.6 JFLB and JOGB ASSYS
SIDE A SIDE A
A
Q4001 IC4002 Q4009
G CN3003
O JFLB ASSY CN4001
1 13
CN4001
1 13
W136
B
W139
W224
PC
W135
W137
W138
W140
C4011
IC4002
W141
77 46 44
77 46 44
W156 W151 W188

C
W154
W152
W148 E
W155
W150
Q4009
C4001
C4005
W153
W164
V4001
W162
R4032
R4031
Q4001
W189
W174
W161
C4006
D W169
W167
DWG1571
W191 W168
W172 W190
JFLB
W170
W192
W193 CONTACT SIDE=UP

3
CN4003
CN4003
1 4 4 6 37
4 6 37
1 4
1
CN4002
1 2 4
DC FC
SHEET SW
CN4002
E
SPACER
R
D4101
YG-A3
JOGB
DWG1572
CN4101
(DNP2078-A)
1 2
1
3
CN4101
P JOGB ASSY
1
(DNP2078-A)
F
O P O P
84 DVJ-X1
1 2 3 4
B
F
C
D
A
85
SIDE B
O P
0 1 A
B
0 1 2 3 0 1 2 3 4 5 6 7 8 9
C
(DNP2078-A)
0 1
LF
8
8
R4028 D4002
C4019
C4102
R4102
V+5D
R4030
GNDD R4003
(DNP2078-A)
R4029 D4001 Q4001
GLOAD
GLOAD
V+5D
CN4002
R4027
FLAC3
R4101
R4103
C4101
1
1.JOG1 1 4
R4002 2.JOB2
R4001 3.V+5D
GNDD
CN4002
R4023 D4006 4.GNDD
R4021
V+5D
Q4008 CN4101
77
VLDJ
4
R4020
JOGB ASSY
R4022
VLDJ
C4012 R4009
6
Q4007
C4013
R4008
Q4006
GNDD
R4007 R4016
V+5D
C4007 R4015
7
7
R
Q4005
DWG1571
R4017 R4006
VLDJ
R4014
CN4001
Q4004
31
C4014 31 30
FLAC3 30 R4005
C4008 R4013
R4004
C4015 R4012
YG-A3
Q4002
1
Q4003
JFLB
1.FLAC3
VLDJ
R4011
G CN3003
2.FLAC4 C4009
3.JOB1 GNDD 50
GLOAD
4.JOG2 R4010
C4002
GLOAD
CN4001
50
5.J_SD0
DVJ-X1
6.J_BK R4026
LF
7.J_XSTB 51 1
8.V+5D 1
IC4003
P
1
51
0 C4004
9.FL_SCLK 10
10.GNDD
11.TCH 0
12.VLDMFL 10
13.GLOAD 01
13
40
C4017 IC
CONTACT SIDE
R4025
FLAC4
GLOAD
80 80
81 81
VLDJ
C4018
GLOAD
C4003
6
6
VLDJ
VLDJ
46
37
44
GLOAD
GLOAD
O JFLB ASSY
FLAC4
VLDJ

R4024
D4005
2
CN4003
C4010
R4018 D4004 1
R4019 3
1
Q4009
D4003
3.GNDD
5
5
1.TCH
2.NC
CN4003 SHEET SW
E
SIDE B
O P
Q4601
IC4001
IC4003
Q4008
Q4002
Q4005
Q4007
Q4006
Q4004
Q4003
1 2 3 4
4.7 CMPB, MJCB and DOUT ASSYS
SIDE A SIDE A
A
L CMPB ASSY
S3701
1 3 DJ NORMAL R DOUT ASSY

W3131
JA3701
W3142
W3132
12.V+5D
9.GNDD
2.GNDV
4.GNDV
6.GNDV
8.GNDV
10.MODE
11.GNDD
1.MAIN V
CMPB DWG1577
3.C CR
5.C CB
C3706
C3704
7.C Y
12 W3133 R
C3701
B 12 V+5D
C3703
1 OPEN SIDE
CN3701
YG-A3
1
CONTACT SIDE=UP
(DNP2077-A)
CN3701
DWG1574
JA4601
DOUT
Q MJCB ASSY
DOUT
W216
CN4602
SYNC IN
4
1 5 2
4
CN4602
7 8
W175
3 4 10
9
W176
JA4503
C JA4505
1
W181 W180 JA4504
VIDEO AUDIO JA4501 C4602
NP
2.GNDD
4.GNDD
JA4502 W179 GNDF
3.DOUT
1.V+5D
S-VIDEO W119
W182 GNDF C4531 R4506
GNDV Q4504
Q4504 (DNP2078-A)
W204
C4507
C4523 C4529
C4522 W205
CN4509
W301
W227
4
GNDD GNDD
4
W127 W116
DOUT
GNDA W206
GNDA GNDD
C4516
GNDD
C4517 V+5D
1
1
C4512
W207
CAUTION V+5D
CN4509
W226
12.MAINV
10.CR/PR
5.GNDV
1.V+5D
REPLACE IC
GNDV
CB/PB
GNDV
Y
GNDD
MODE
GNDD
GNDV
CN4506
W126
LINKS AS MARKED W105

GNDA
CN4506
1
1
W208
GLOAD
W196
W104
D
A CN701
12
12
W197 V+5D W103
CONTACT SIDE
W125
DWG1573
MJCB
W114
Q4503 Q4503
W113
1.FLAC1 IC4501 491.250

2.FLAC2
3.FLAC3
IC4501
R4511 MFD.BY
IC4501 4.FLAC4 LITTELFUSE INC.
IC4504 491.800 30.VLD_OFF2
1
CONTACT SIDE
V CN101
W199
CONT2
IC4506 491002. CONT1
1
CN4505
IC4504 GNDD
IC4507
5.VLOAD
IC4507 491.250 ROUT
J4502
IC4504
6.GLOAD
C4520
IC4508 491.500 25.GNDA

30 30
7.V+12A
IC4507 MFD.BY LOUT
J4502
GNDA
V+5D
LITTELFUSE INC. PRE V

GNDV
A CN703
IC4506 IC4510 49102.5 MAIN V

GNDV
GNDV
IC4506
C4521
IC4511 49102.5 MAINDC

CN4501
GNDV
W112
IC4508 IC4512 491003. MAINC

10 11
E IC4514 49101.6 GNDV

W198
CN4501
10
10
PREDC
WHITE
11
MFD.BY
B CN2006 V CN102
GNDV
PREC
8.GNDA
9.V+5V
W223 LITTELFUSE INC. GNDV
IC4508
MAINY
IC4512
10.GNDV
IC4513 ICP-N20 GNDV
CN4505
PREY
MFD.BY GNDV
G CN3002
Y
1
1
1.V+3R3 IC4512
J4504
ROHM CO.LTD. GNDV

11
CN4503
W201
W122
IC4511 2.V+3R3
FLAC3
J4504
CB/PB
FLAC4
3.V+3R3 1.VLDMFL 17.GNDD GNDV

4.GNDD GLOAD SYNCIN CR/PR
GNDA
15.GNDD
1 2
5.GNDD IC4511 FLAC1 1.GNDV

11
NC D OUT
IC4510 6.GNDD
GNDD
1
GNDD
GNDD W102
5.FLAC2 GNDD
W123
7.V+12S
CONTACT SIDE
SRDY MODE
8.V+12S
1717
GNDA GNDD
W200
W183
9.GNDS IC4510 10.SRDY

A CN702
RXD
RXD
10
10.GNDS GLED
11.V+5S 1.V+12S 10.TXD TXD
10.GNDV
CN4508
CN4508
2.GNDS GNDD
V+12A
W221
GNDD
SCLK
GNDD
3.GNDS GNDV
W111
5.GNDD
W202
IC4513
CN4507
4.V+5S V+5V XCS

IC4513
CN4507
W120
GNDD
W186 GNDA
SIN
5.GNDD
CN4503
SOUT
1
GNDD 1.GNDD
V+3D2
11
11
V+3D3
CONTACT SIDE
20 22
1.V+3D1
W222
GNDA
1
W203
IC4514
15.V+5D
11.VLED
IC4514
22.SOUT
20.GNDA
4
22
4
FLAC4
NC
FLAC3
NC
SCLK
GNDA
XCS
SIN
F
GNDD
R
YG-A3
(DNP2078-A)
L Q R L Q R
86 DVJ-X1
1 2 3 4
5 6 7 8
SIDE B SIDE B
A
L CMPB ASSY
R3704
JA3701
C3708
R3703
C3705
R3702
C3702
S3701
C3707
LF
NORMAL DJ
R3707
R3706
R
C3709
R3705
R3701
1.MAIN V
DOUT ASSY
C3710
2.GNDV
12 3.C CR
4.GNDV
D3702
5.C CB B
R3708
D3701
V+5D 6.GNDV
MANUAL SOLDER
JA4601
7.C Y
CN3701 8.GNDV
1
9.GNDD 11.GNDD
CMPB CN3701
10.MODE 12.V+5D
YG-A3
(DNP2077-A)
R
DOUT
R4607
Q MJCB ASSY
R4604
C4603
R4605
CN4602
Q4601
LF
JA4501
MANUAL SOLDER
GNDV
R4603
JA4502
CN4602
JA4504
R4602
4
GNDF
D4511
C4601 D4503 JA4505 R4538

R4601 C4506
D4502
1
GNDV
DOUT
R4606
R4535
C4505
C4511 C4515 C
R4537
R4502
JA4503
Q4506
4.GNDD
3.DOUT
2.GNDD
1.V+5D
Q4505 Q4506
D4509
C4519 C4518
GNDF C4514 C4510
D4501
GNDV
Q4505
R4523
GNDF R4518
R4534 D4510
R4525 R4524 R4519 R4522
Q4504
CN4509
(DNP2078-A) C4504 Q4504

R4505
C4530 R4528
R4530
R4527
4
4.GNDD GNDD
3.DOUT R4517 R4521
CN4509
R4531 R4536 C4509 C4513
LF MJCB
GNDA GNDA
2.GNDD GNDD
1
1.V+5D
19.GNDV 11.GNDV
18.MAINDC 10.MAINY
V+5D ATTENTION CN4506
12.MAINV
10.CR/PR
GNDA
5.GNDV
MODE
CB/PB
GNDV
17.GNDV 9.GNDV
GNDD
GNDD
GNDV
GNDV
1.V+5D
16.MAINC 8.PREY REMPLACER LE IC
15.GNDV 7.GNDV
LINKS COMME INDIQUE
Y
14.PREDC 6.Y
13.GNDV 5.GNDV
12.PREC 4.CB/PB
30.VLD_OFF2
CN4506
CN4506
GLOAD
3.GNDV 1
CN4501
2.CR/PR
20.MAIN V
29.CONT2
28.CONT1
IC4515
22.PRE V
27.GNDD
25.GNDA
23.GNDA
21.GNDV
26.ROUT
CN4501
24.LOUT
1.GNDV
6
1
A CN701
1 3
5 4
IC4515 D
3
4
12
V+5D R4512
C4508
56
11
IC4503
R4516 IC4503
LITTELFUSE INC.
Q4503
33
44
Q4503
IC4501 491.250
IC4512 491003.
R4515
17.FLAC3 IC4501
18.NC R4503 IC4501
DE CHEZ
19.FLAC4
20.GNDA 1.VLDMFL
GNDD
V CN101
21.SIN 2.GLOAD
3.FLAC1
V+5D
CN4505
22.SOUT 1.FLAC1
1
IC4504
IC4513 ICP-N20
4.NC
IC4508 491.500
IC4507 491.250
IC4506 491002.
IC4504 491.800
5.FLAC2
LITTELFUSE INC.
2.FLAC2
J4502
6.SRDY
J4502
30
IC4504
7.GNDA 3.FLAC3
LITTELFUSE INC.
8.RXD 4.FLAC4 IC4507

ROHM CO.LTD.
9.GLED
10.TXD 5.VLOAD
R4550
DE CHEZ
IC4507
11.VLED 6.GLOAD
R4552 12.XCS 7.V+12A
R4551
13.GNDA IC4506
A CN703
IC4506
14.SCLK
8.GNDA
R4553
15.V+5D
16.NC IC4508
CN4501
9.V+5V
IC4511 49102.5
IC4508
E
GNDV
11 10
10.GNDV
IC4514 49101.6
R4554
V CN102
R4555
CN4501
R4556 R4557
IC4512 IC4512
DE CHEZ
R4558
FLAC3
CN4505
J4504
R4559
DE CHEZ
G CN3002
1.V+3R3
IC4511
1
IC4511 2.V+3R3
CN4503
R4560 3.V+3R3
R4561
4.GNDD
R4562
5.GNDD IC4510
GNDD
GNDD
IC4510 6.GNDD
1
17.GNDD
1
FLAC4
7.V+12S
17
8.V+12S
GNDA
SYNCIN
GNDD
GNDD
15.GNDD 9.GNDS
B CN2006
10
A CN702
J4504
D OUT 10.GNDS
IC4510 49102.5
CN4503
GNDD 11.V+5S
CN4508
MODE 10.GNDA
GNDD
CN4508
GNDD 9.V+12A
10.SRDY 8.GNDV IC4513
CN4507
7.V+5V
1
RXD 1.V+12S IC4513

TXD 6.GNDD
GNDD 5.GNDD
GNDA
R4532 4.GNDD
CN4507
SCLK 2.GNDS
5.GNDD 3.V+3D2
11
GNDD
2.V+3D3
20 22
XCS 1.V+3D1
GNDA
3.GNDS
SIN IC4514 IC4514
1
SOUT
1.GNDD F
4.V+5S
4
L Q R (DNP2078-A)
L Q R
DVJ-X1 87
5 6 7 8
1 2 3 4
4.8 PSWB and SW POWER SUPPLY ASSYS
SIDE A SIDE A
A
N PSWB ASSY
DWS1349
R
W3152 DWS1345 AN4301
YG-A3
AC IN AC IN
PSWB LIVE
C4301
W3153
HOT W3155
DWS1349 W3154
S4301
POWER SW
NEUTRAL
J4301
DWS1345
2
1
ORANGE
WHITE
J4301
(DNP2077-A)
V SW POWER SUPPLY ASSY
E
Q J4504
CN102
F CN101
(DWR1378)
N V Q J4502 N V
88 DVJ-X1
1 2 3 4
5 6 7 8
SIDE B SIDE B
A
N PSWB ASSY
MANUAL SOLDER
AC IN
HOT
MANUAL SOLDER
J4301
PSWB
POWER SW S4301
AN4301
LF J4301
(DNP2077-A)
E
CN102
CN101
F
(DWR1378)
N V N V
DVJ-X1 89
5 6 7 8
1 2 3 4
5. PCB PARTS LIST

NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
A
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω 56 x 10 1 561 RD1/4PU 5 6 1 J
47k Ω 47 x 10 3 473 RD1/4PU 4 7 3 J
0.5 Ω R50 RN2H R 5 0 K
1Ω 1R0 RS1P 1 R 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω 562 x 10 1 5621 RN1/4PC 5 6 2 1 F
B LIST OF PCB ASSEMBLIES

DVJ-X1
Mark Symbol and Description
/KUC
1..MAIN ASSY DWG1570
NSP 1..DVPB ASSY DWM2175

2..DVPL ASSY DWX2341
2..STCN ASSY DWX2342
2..SPCN ASSY DWX2343
2..SDCB ASSY DWX2344
C NSP 1..SUB1 ASSY DWM2176

2..DIPB ASSY DWG1575
2..MFLB ASSY DWG1576
2..CMPB ASSY DWG1577
2..LED1 ASSY DWG1578
2..LED2 ASSY DWG1579
2..PSWB ASSY DWS1345
2..RSWB ASSY DWS1346
2..SLDB ASSY DWS1347
NSP 1..SUB2 ASSY DWM2181

2..JFLB ASSY DWG1571
2..JOGB ASSY DWG1572
D
2..MJCB ASSY DWG1573
2..DOUT ASSY DWG1574
2..KSWB ASSY DWS1343
2..SLMB ASSY DWS1344
2..EJTB ASSY DWS1348
1..INSW ASSY DWS1342
> 1..SW POWER SUPPLY ASSY DWR1378
PARTS LIST OF DVJ-X1/ KUC

E
AMAIN ASSY
SEMICONDUCTORS
IC117
IC305
M51957BFP
M65774BFPA
IC1103,IC1108,IC1708,IC504 MM1561JF
IC1502,IC1506 ADV7172KST
IC1504,IC301,IC302 MM1562FF
IC1707 BU2288FV
IC1512 NJM2068M
IC113 DYW1734
IC111 HD6417709SHF200B
IC1507 NJM78L05UA
IC1508 HY57V161610DTC-8
IC1703 NJU7013F
IC1510 PCM1742KE
IC103,IC109,IC1301-IC1312 K4S561632E-TC75
IC1513 PD0274A
F IC702,IC703 K4S561632E-TC75
IC903 PD6449A
IC1105,IC303,IC904-IC907 K4S641632F-TC75
IC1501,IC1505 LA73054
IC701 PE5337A
IC1104 LM1881M
IC1511 PM0033A
90 DVJ-X1
1 2 3 4
5 6 7 8
IC121,IC902 PQ070XZ02ZP C1108,C1119,C115,C1184,C1548 CCSRCH471J50
IC1102 SN74LV08APW C1743,C309,C312,C516 CCSRCH471J50
IC1702 TC4W53FU C1723 CCSRCH4R0C50
C167,C168 CCSRCH7R0D50 A
IC1503 TC74HC4053AFT
IC108 TC74LCX16245AFT C103,C1107,C111,C1110,C1111 CEHVW101M6R3
IC114 TC74LCX32FT C1128,C1171,C1181,C1182,C1301 CEHVW101M6R3
IC104,IC110,IC112,IC115,IC120 TC74LCX541FT C1386,C1504,C1536,C1538,C1541 CEHVW101M6R3
IC101,IC102 TC74VHC04FT C1549,C1593,C1619,C1627 CEHVW101M6R3
C164-C166,C1702,C1704,C1706 CEHVW101M6R3
IC123 TC74VHC125FT
IC1509 TC74VHC157FT C1731,C1740,C304,C306,C308 CEHVW101M6R3
IC1101 TC7S66FU C311,C368,C377,C501,C503 CEHVW101M6R3
IC122,IC1704 TC7SH04FU C513,C515,C524,C553,C558 CEHVW101M6R3
IC105,IC116,IC118,IC124,IC1514 TC7SH08FU C560,C710,C734,C906,C907 CEHVW101M6R3
C916,C979,C986,C987 CEHVW101M6R3
IC1705 TC7SH08FU B
IC1701,IC901 TC7SHU04FU C1509,C1530,C1546,C1580 CEHVW470M10
IC106,IC107 TC7SZ08FU C1586,C1588,C1603,C1604,C1613 CEVW470M16
IC306,IC307 TC7SZ126FU C1620,C1632,C1708,C1710,C1714 CEVW470M16
IC119 TC7SZU04FU C1118 CEVWNP1R0M50
C1623,C1634 CEVWNP220M16
IC908 TC7WH125FU
IC1706 TC7WH34FU C1170,C1173,C125,C140,C1501 CKSRYB103K50
IC503 TE4300PF C1534,C1599,C1606,C1629,C1635 CKSRYB103K50
IC507 TK11116CS C1724,C1725,C318,C370,C502 CKSRYB103K50
IC505 TMS320DA150PGE160 C538,C539,C546,C729,C909 CKSRYB103K50
C101,C102,C104-C108 CKSRYB104K16
IC1106,IC1107 XC2S150E-6PQ208C
IC304 XC2S50-5PQ208C C1101,C1102,C1104-C1106,C1109 CKSRYB104K16 C
IC506 XCA56367PV150 C1112-C1117,C112,C1120-C1127 CKSRYB104K16
Q1501,Q1503-Q1505,Q1507,Q1508 2SA1576A C1129,C113,C1130-C1139,C114 CKSRYB104K16
Q1510-Q1515,Q1517 2SA1576A C1140-C1159,C116,C1160-C1169 CKSRYB104K16
C117,C1172,C1174-C1179,C118 CKSRYB104K16
Q1518,Q1519,Q1521 2SD2114K
Q1516,Q1523 DTC114YK C1180,C1183,C1185,C119-C124 CKSRYB104K16
Q1701 DTC124EUA C126-C130,C1302-C1309,C131 CKSRYB104K16
Q1502,Q1506,Q1509 RN4982 C1310-C1319,C132,C1320-C1329 CKSRYB104K16
D502,D504,D506,D508 DAN202K C133,C1330-C1339,C134 CKSRYB104K16
C1340-C1349,C135,C1350-C1359 CKSRYB104K16
D501,D503,D505,D507 DAP202K
D1701 KV1837K C136,C1360-C1369,C137 CKSRYB104K16
D1501 UDZS6.2B C1370-C1379,C138,C1380-C1385 CKSRYB104K16 D
C139,C141,C142,C144-C150 CKSRYB104K16
COILS AND FILTERS C1503,C1506,C1507,C151 CKSRYB104K16
F106,F109,F110,F1509-F1511 DTF1069 C1511-C1513,C1515,C1516 CKSRYB104K16
CHIP BEAD
F1716,F1717,F509,F703,F906 DTF1069 C1518,C1519,C152,C1520-C1522 CKSRYB104K16
CHIP BEAD C1524,C1525,C1527,C1528,C153 CKSRYB104K16
F910 CHIP BEAD DTF1069 C1533,C1535,C1537,C154,C1540 CKSRYB104K16
C1543,C1544,C155,C1550-C1556 CKSRYB104K16
F1708-F1715 CHIP BEAD DTF1070 C1558,C1559,C156,C1560-C1566 CKSRYB104K16
L101 LCYA1R5J2520
L1701 LCYA2R2J2520 C1568,C1569,C157,C1570,C1571 CKSRYB104K16
F101,F102,F1101-F1106 EMI FILTER VTF1171 C1573,C1574,C1576-C1578,C158 CKSRYB104K16
C1582,C1584,C1585,C1587,C1589 CKSRYB104K16 E
F111,F112,F1301-F1304 EMI FILTER VTF1171
C159,C1590,C1592,C1594-C1598 CKSRYB104K16
F1501-F1504,F1701-F1706 VTF1171 C160,C1600-C1602,C1605 CKSRYB104K16
EMI FILTER
F301-F306,F501-F507 EMI FILTER VTF1171 C1607-C1609,C161,C1610-C1612 CKSRYB104K16
F701,F702,F706,F901-F905 VTF1171 C1614-C1618,C1625,C1626,C1628 CKSRYB104K16
EMI FILTER C1630,C1631,C1636,C1637,C170 CKSRYB104K16
C1701,C1703,C1705,C1707,C1709 CKSRYB104K16
CAPACITORS C171,C1711-C1713,C1715-C1717 CKSRYB104K16
C905 CCSRCH100D50
C1622,C1633 CCSRCH101J50 C1719,C1726,C1732-C1734,C1736 CKSRYB104K16
C169 CCSRCH102J50 C1741,C1742,C301-C303,C305 CKSRYB104K16
C307,C310,C313-C317 CKSRYB104K16
C904 CCSRCH120J50 F
C1727-C1729 CCSRCH221J50 C319-C367,C369,C371-C376 CKSRYB104K16
C378,C5001-C5020,C5024 CKSRYB104K16
C1720 CCSRCH330J50
C5037-C5052,C5054,C5055 CKSRYB104K16
DVJ-X1 91
5 6 7 8
1 2 3 4
C5057,C5058,C5070,C5073 CKSRYB104K16 R950,R954-R964 RAB4C560J
C5076-C5079,C508,C5080 CKSRYB104K16 R1519,R1527,R1529 RS1/16S1000F
C5083-C5086,C5089-C5091,C512 CKSRYB104K16
A C514,C518-C523,C525-C537 CKSRYB104K16 R232,R908,R914 RS1/16S1001F
R1550 RS1/16S1201F
C540,C541,C544,C545 CKSRYB104K16 R1504,R1513,R1515,R1549,R1561 RS1/16S1500F
C547-C552,C554-C557,C559 CKSRYB104K16 R1573,R1740,R1741 RS1/16S1500F
C561 CKSRYB104K16 R1605,R1627 RS1/16S1502F
C1510,C1517,C1526,C1531 CKSRYB105K10
C109,C110,C1547,C1557,C1575 CKSRYB105K6R3 R1606,R1628 RS1/16S2201F
R229 RS1/16S2700F
C1581,C162,C163,C1721 CKSRYB105K6R3 R1546 RS1/16S3001F
C504-C507,C517,C543 CKSRYB105K6R3 R220 RS1/16S3300F
C701-C709,C712-C728 CKSRYB105K6R3 R1638,R1640,R1743 RS1/16S3301F
C730-C733,C736-C746 CKSRYB105K6R3
C901-C903,C908,C910-C915 CKSRYB105K6R3 R1510,R1525,R1544,R1572 RS1/16S4701F
B R1639,R1641 RS1/16S5601F
C917-C978,C980-C985 CKSRYB105K6R3 R1555,R1568,R1584 RS1/16S56R0F
C1621,C1624 CKSRYB152K50 R1509,R1524,R1543,R1571 RS1/16S6800F
C542 CKSRYB222K50 R1604 RS1/16S75R0F
C1735 CKSRYB332K50
C1737 CKSRYB472K50 R1609,R1625 RS1/16S8201F
VR1501 CCP1436
VC1701 (20pF) VCM1012 Other Resistors RS1/16S###J
RESISTORS OTHERS
R1129,R1132,R1139,R1145,R511 RAB4C0R0J X501 CERAMIC OSCILLATOR CSS1616
R921,R924,R928,R931,R933 RAB4C101J X101 CRYSTAL RESONATOR DSS1144
R701,R712,R719,R727 RAB4C102J (65.975MHz)
C R743,R744,R808,R813,R814 RAB4C102J X1701 CRYSTAL RESONATOR VSS1146
R102,R104-R106,R113,R120 RAB4C103J (27.000MHz)
R124,R125,R145,R155,R164 RAB4C103J X901 CRYSTAL RESONATOR VSS1159

R167,R177,R189-R196,R703 RAB4C103J (27.000MHz)
R718,R725,R733,R967 RAB4C103J CN1701 PH CONNECTOR B10B-PH-SM3
R1108-R1111,R1115-R1117 RAB4C220J CN102 PH CONNECTOR B6B-PH-SM3
R1120-R1123,R1128,R1130,R1131 RAB4C220J CN501 13P FFC CONNECTOR VKN1417
R1133-R1138,R1140,R1144,R1146 RAB4C220J CN1702 17P FFC CONNECTOR VKN1421

R1148,R115,R1152,R1159,R116 RAB4C220J CN1703 30P FFC CONNECTOR VKN1434
R1167-R1169,R117,R1170 RAB4C220J CN701 40P FFC CONNECTOR VKN1794
R118,R119,R123,R127 RAB4C220J KN1701-KN1708 VNF1109
D
R136-R138,R141-R144 RAB4C220J EARTH METAL FITTING
R147-R154,R157,R159 RAB4C220J
R161-R163,R165,R166,R168
R176,R178-R186,R197,R198
R202,R210,R301,R302
RAB4C220J
RAB4C220J
RAB4C220J
BDVPL ASSY
SEMICONDUCTORS
R306,R307,R310,R311 RAB4C220J IC2000 AN22022A
IC2200 BD7905BFS
R317,R318,R320,R322,R323 RAB4C220J > IC2303 FUSE (0.125A) DEK1086
R326,R327,R331,R332 RAB4C220J IC2300 MM1478DFBE
R335,R336,R338,R339,R346 RAB4C220J IC2100 MN103S71F
R348,R349,R351,R352,R357 RAB4C220J
R363-R365,R367,R369,R370 RAB4C220J IC2101 PEA006B8
E
IC2301 PQ070XZ02ZP
R372,R373,R375-R377,R379 RAB4C220J Q2001, Q2002 2SA1577
R383,R385,R387,R542,R543 RAB4C220J Q2202 2SJ599-Z
R560,R578,R579,R704 RAB4C220J Q2201 DTC124EK
R709-R711,R752,R758-R760 RAB4C220J
R769,R776,R782,R789,R790 RAB4C220J Q2003 UM5K1N
R795,R797,R798,R802,R803 RAB4C220J COILS AND FILTERS

R805,R823,R830,R910,R911 RAB4C220J L2300 CHIP COIL OTL1009
R507,R508,R563 RAB4C223J L2101-L2116 CHIP BEAD VTL1075
R515,R522-R524 RAB4C330J
R573,R574,R584,R586 RAB4C472J
CAPACITORS
F C2113 CCSRCH101J50
R112,R203,R204,R819-R822 RAB4C560J
C2016, C2204, C2205 CCSRCH151J50
R824-R829,R925,R929,R932 RAB4C560J
C2308, C2310 CEHAR100M16
R937,R939-R944,R947,R948 RAB4C560J
C2207, C2303, C2305 CEHAR101M10
92 DVJ-X1
1 2 3 4
5 6 7 8
C2020, C2022, C2302, C2312 CEHAR470M16 CN2402 12P FFC CONNECTOR DKN1205
CN2401 13P FFC CONNECTOR DKN1275
C2014, C2114, C2115, C2121, C2139 CKSRYB102K50 CN2403 ZR CONNECTOR S2B-ZR-SM3A
C2146, C2149, C2150, C2154 CKSRYB102K50 A
C2218-C2220 CKSRYB102K50
C2109, C2211
C2000-C2004, C2006-C2008, C2013
CKSRYB103K50
CKSRYB104K16 ESDCB ASSY
SWITCHES AND RELAYS
C2015, C2021, C2023, C2101 CKSRYB104K16 S2501 DSG1074
C2105-C2108, C2110, C2111 CKSRYB104K16
C2116, C2117, C2120, C2122 CKSRYB104K16 CAPACITORS
C2127-C2132, C2138, C2141, C2142 CKSRYB104K16 C2501 CKSRYB104K16
C2203, C2206, C2301, C2304 CKSRYB104K16
C2306, C2307, C2309, C2313 CKSRYB104K16

RESISTORS
All Resistors RS1/16S###J
C2320, C2321, C2323 CKSRYB104K16
C2100, C2102-C2104, C2300 CKSRYB105K6R3 B
C2118 CKSRYB122K50 OTHERS
C2124, C2136, C2137, C2140 CKSRYB182K50 CN2501 SD CONNECTOR DKN1241
CN2502 FLEXIBLE CONNECTOR SFW13R-2ST
C2125 CKSRYB222K50
C2010, C2112 CKSRYB273K16
C2123, C2135
C2119, C2208, C2209
C2011, C2134
CKSRYB471K50
CKSRYB472K50
CKSRYB473K16
FINSW ASSY
SWITCHES AND RELAYS
S5001 CSN1031
C2133 CKSRYB474K10
C2009 CKSRYB561K50 OTHERS
C2126 CKSRYB562K50 CN5001 ZR CONNECTOR S2B-ZR-SM3A
C2202, C2315 DCH1195 C
RESISTORS
R2010
R2011, R2302-R2304
DCN1130
DCN1133
GDIPB ASSY
SEMICONDUCTORS
R2114, R2115, R2201-R2203 DCN1143 IC3004 PEG012A
R2151-R2154, R2163 RAB4C0R0J IC3003 PST994D
R2117 RAB4C103J IC3001, IC3002 TC7SET08FU
IC3006, IC3007 TC7WH34FU
R2155 RAB4C560J Q3002-Q3020 DTC124EUA
R2305 RS1/16S1001F
R2112 RS1/16S1502F D3005, D3007, D3009, D3011, D3021 SLI-343URCW
R2306 RS1/16S2000F D3012-D3015, D3019, D3022-D3024 SLI-343YCW
R2214, R2215 RS1/4S2R0J D
D3003 SLR-343BBT
D3006, D3008, D3010 SLR-343EBT
Other Resistors RS1/16S###J D3016-D3018, D3020 TLGE68TG
OTHERS SWITCHES AND RELAYS

CN2005 KR CONNECTOR 2P B2B-PH-K S3001-S3003, S3007-S3009 DSG1079
CN2004 KR CONNECTOR 3P B3B-PH-K S3004-S3006, S3010-S3032 VSG1024
CN2008 4P TOP POST B4B-EH
CN2007 40P FFC CONNECTOR DKN1196 CAPACITORS
CN2003 4P FFC CONNECTOR DKN1223 C3017, C3022 CCSRCH101J50
C3002 CEAT331M10
CN2002 13P FFC CONNECTOR DKN1275 C3004 CEAT470M16
X2100 CHIP CERALOCK DSS1107 E
C3047 CEHAS101M10
(16.93MHz) C3011 CEHAT470M16
0 PCB BINDER VEF1040
KN2001, KN2002 VNF1084 C3012, C3015, C3018, C3020, C3023 CKSRYB102K50
WRAPPING TERMINAL C3025 CKSRYB102K50
C3005-C3007, C3009, C3027-C3031 CKSRYB103K50
C3036, C3044, C3045 CKSRYB103K50
CSTCN ASSY
OTHERS
C3003, C3013, C3014, C3032, C3033 CKSRYB104K16
C3010 CKSRYB105K10
CN2404 4P FFC CONNECTOR DKN1223 C3008 CKSRYB221K50
CN2405 4P FFC CONNECTOR VKN1409
RESISTORS
F
VR3001, VR3002 (10KB) DCS1045
DSPCN ASSY
OTHERS
Other Resistors RS1/16S###J
DVJ-X1 93
5 6 7 8
1 2 3 4
OTHERS C3302 CKSRYB103K50
X3001 CERAMIC RESONATOR DSS1147
0 2P CABLE HOLDER 51048-0200 OTHERS
A CN3004, CN3005 52492-0920 0 2P CABLE HOLDER 51048-0200
FFC CONNECTOR 9P
CN3003 FFC CONNECTOR 13P 52492-1320
CN3002 FFC CONNECTOR 22P

CN3001 B TO B CONNECTOR 16P
52492-2220
DKN1286
LCMPB ASSY
SEMICONDUCTORS
J3006 JUMPER WIRE 2P D20PYY0210E D3701, D3702 1SS355
J3302 JUMPER WIRE 2P D20PYY0225E
SWITCHES AND RELAYS
S3701 DSH1025
HRSWB ASSY
SWITCHES AND RELAYS
CAPACITORS
B C3701, C3706 CEAT102M6R3
S3101 DSK1021 C3703, C3704 CEAT471M6R3
C3709, C3710 CKSRYB104K16
OTHERS
0 2P CABLE HOLDER 51048-0200 RESISTORS
R3701, R3703, R3704, R3706 RS1/16S75R0F
ISLDB ASSY
SEMICONDUCTORS
OTHERS
JA3701 BNC SOCKET 4P AKX1053
Q3201 DTC124EUA CN3701 12P FFC CONNECTOR VKN1272
D3201-D3204 1SS355
D3205 TLGE68TG
MMFLB ASSY
C
SWITCHES AND RELAYS
S3201 VSG1024 SEMICONDUCTORS
Q3401 2SB1237X
CAPACITORS D3403 1SS355
C3208 CCSRCH101J50 D3401 UDZS8.2B
C3203 CKSRYB103K50
C3201, C3204, C3207 CKSRYB104K16 CAPACITORS
C3404-C3407 CCSRCH221J50
RESISTORS C3401, C3409 CEAT470M16
VR3201 DCV1013 C3408 CEAT470M63
VR3202 (1 kohm) RCP1110 C3402 CKSRYB104K16
D
RESISTORS
OTHERS All Resistors RS1/16S###J
CN3202 BOTTOM CONNECTOR 53095-0510 OTHERS
V3401 FL TUBE DEL1052
CN3402 B TO B CONNECTOR 6P DKN1287
JLED1 ASSY
SEMICONDUCTORS
0 FL HOLDER
CN3401 B TO B CONNECTOR 16P
DNF1688
VKN1368
D3301 NSPB500-0008
E
CAPACITORS
C3301 CKSRYB103K50
NPSWB ASSY
SWITCHES AND RELAYS
> S4301 RSA1001
RESISTORS
All Resistors RS1/16S###J OTHERS
> AN4301 1P AC INLET AKP7032
OTHERS > J4301 CONNECTOR ASSY DKP3566
0 2P CABLE HOLDER 51048-0200 0 PCB BINDER VEF1040
CN3301 BOTTOM CONNECTOR 52084-0510
KLED2 ASSY OJFLB ASSY

SEMICONDUCTORS
F SEMICONDUCTORS IC4001 UPD16306B
D3303 NSPB500-0008 Q4001 2SB1237X
Q4002-Q4008 2SC4081
CAPACITORS Q4009 2SD2395
94 DVJ-X1
1 2 3 4
5 6 7 8
D4003, D4006 1SS355 C4529 CEAT470M10
D4001 UDZS10B C4504, C4506 CKSRYB103K50

D4004 UDZS20B C4508, C4509, C4513, C4530 CKSRYB104K16 A
D4005 UDZS22B C4522, C4523 CQMA152J50
CAPACITORS RESISTORS
C4012-C4015 CCSRCH181J50 R4506 RD1/2VM271J
C4011 CEAT470M16 R4511 RD1/2VM470J
C4005, C4006 CEHAT100M50 R4553-R4562 RS1/10S0R0J
C4001 CEHAT470M16 R4518, R4519, R4522-R4525, R4538 RS1/16S75R0F
C4018 CKSRYB102K50 Other Resistors RS1/16S###J
C4002-C4004, C4007-C4010 CKSRYB103K50 OTHERS

0 11P CABLE HOLDER 51048-1100
RESISTORS JA4502 4P MINI DIN SOCKET AKP7116
B
R4031, R4032 RD1/2VM101J 4505 BNC SOCKET AKX1054
Other Resistors RS1/16S###J CN4505 KR CONNECTOR B10B-PH-K
CN4507 4P TOP POST B4B-EH
OTHERS
CN4001 FFC CONNECTOR 13P 52492-1320 J4502 JUMPER WIRE 11P D20PYY1110E
CN4003 FLEXIBLE CONNECTOR 5597-03APB JA4504 2P PIN JACK DKB1045
V4001 FL TUBE DEL1053 J4504 CONNECTOR ASSY 11P DKP3664
0 FL HOLDER DNK3959 CN4503 FFC CONNECTOR 22P HLEM22S-1
CN4002 KR CONNECTOR S4B-PH-K CN4509 4P PLUG KM200IB4
JA4501 REMOTE CONTROL JACK RKN1004
PJOGB ASSY
JA4503 2P PIN JACK VKB1123
C
SEMICONDUCTORS CN4508 17P FFC CONNECTOR VKN1248
D4101 GP1A038RBK
CAPACITORS
C4101, C4102 CKSRYB104K16
RDOUT ASSY
SEMICONDUCTORS
RESISTORS Q4601 2SC2412K
CAPACITORS
OTHERS C4602 CEAT470M16
CN4101 KR CONNECTOR B4B-PH-K C4601 CKSRYB103K50
C4603 CKSRYB104K16 D
QMJCB ASSY
SEMICONDUCTORS
RESISTORS
R4602 RS1/16S1801F
R4603 RS1/16S3901F
> IC4501, IC4507 (250mA) AEK7002 Other Resistors RS1/16S###J
> IC4508 (500mA) AEK7005
> IC4504 (800mA) AEK7008
> IC4514 (1.6A) AEK7012
OTHERS
> IC4506 (2A) CN4602 4P SOCKET KP200IB4L
AEK7013
JA4601 1P PIN JACK (AU, BLK) VKB1074
> IC4510, IC4511 (2.5A) AEK7014
> IC4512 (3A) AEK7015
> IC4513
IC4503
ICP-N20
TC7SET04FU SKSWB ASSY
SEMICONDUCTORS
E
IC4515 TC7SET08FU
Q4201-Q4203 DTC124EUA
Q4504 2SC1740S D4214, D4216 NSPB500-0008
Q4503 2SD1859X D4213 SLI-343URCW
Q4505, Q4506 2SD2114K D4201-D4204 SLI-343YCW
D4509, D4510 1SS355 D4207-D4209, D4211 SLR-343BBT
D4511 NNCD6.2MF
SWITCHES AND RELAYS
D4501, D4503 UDZS5.6B S4201, S4202 DSG1079
S4203-S4206 VSG1024
CAPACITORS
C4531 CEANP220M10 CAPACITORS F
C4507, C4512, C4516, C4517 CEAT102M6R3 C4209 CCSRCH101J50
C4521 CEAT221M10 C4203-C4208 CKSRYB103K50
C4520 CEAT221M25
DVJ-X1 95
5 6 7 8
1 2 3 4
RESISTORS
A OTHERS
TSLMB ASSY
SWITCHES AND RELAYS
S4701, S4702 DSG1017
OTHERS
CN4701 KR CONNECTOR S3B-PH-K
UEJTB ASSY
SWITCHES AND RELAYS
S3503 DSH1049
S3501, S3502 VSG1024
CAPACITORS
C3501 CCSRCH101J50
C3503 CKSRYB103K50
C3502 CKSRYB104K16
RESISTORS
C
OTHERS
CN3501 B TOB CONNECTOR 6P VKN1358
96 DVJ-X1
1 2 3 4
5 6 7 8
6. ADJUSTMENT
6.1 SLDB ZERO POINT ADJUSTMENT
A
1. SLDB Assy Adjustment

Slider Zero Point Adjustment
Adjustment Condition Open the control panel and the player is the normal operation state.
Set the TEMPO range to ±6%.
Adjustment point VR3202

Measurement point TEMPO indication
B
Measuring Instrument None
Adjustment Value Visual inspection
Procedures 1 Set the slide-knob position of TEMPO VR (VR3201) to "0" on the panel-scale position
indication.
2 Adjust VR3202 (ZERO POINT ADJ) so that the value of TEMPO indication becomes
0.00%.
Symptom of an The position of the slide knob corresponding to TEMPO 0.00% on the FL display does
adjustment error not match "0" printed on the panel.
Adjustment Point C
Value of TEMPO indication
2
Precision screwdriver
(small)
VR3202
1
VR3201
SLDB ASSY SIDE B E
ADIN
1
VR3201 ADCT
9
CN3201
VR3202
4
2
1
DVJ-X1 97
5 6 7 8
1 2 3 4
2. MAIN Assy Adjustment

Master Clock Free-running Adjustment
A
Adjustment Condition SYNC signal is no input. No disc
Adjustment point VC1701
Measurement point TP1
Measuring Instrument Frequency counter
Adjustment Value 27MHz ± 20Hz
Procedures Adjust VC1701 so that the frequency of TP1 becomes 27MHz ± 20Hz.
Symptom of an adjus Displays are disrupted, not correct, or stop.
B tment error
Color Difference System Y-level Adjustment

Adjustment Condition In progressive output selection, FCC composite (T2-C1) playback (between a sink tip
and white)
Adjustment point VR1501
Measurement point TP2
Measuring Instrument Oscilloscope
C Adjustment Value 710mVp-p ± 2%

Procedures Adjust VR1501 so that the value of TP2 becomes 710mVp-p ± 2%.
Symptom of an adjus Displays too dark or bright. Improper color.

tment error
Adjustment Point
MAIN ASSY SIDE A
VC1701
TP1 VR1501
VR ADJ
E 27MHz TP2
VR ADJ
710mV
98 DVJ-X1
1 2 3 4
5 6 7 8
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 SERVICE MODE
A
Typesmode
1. Check of Service Modes
for the version and error log
The unit
The is provided
version withlog
and error three
canmicrocomputers: a microcomputer
be checked on the that controls
screens displayed key
in Service input and FL/LED display (display u com.)
mode.
a mechanism-control microcomputer that drives the disc loading mechanism and servo mechanism, and a system control
microcomputer that controls the whole system. The following test modes are provided for diagnosis of each microcomputer.
How to enter Service mode
~•Mode for checking
In Service mode therekey input
are two in theone
screens: display block and
for displaying for display
the version functions
of each software item, and another for displaying
In this
themode, key input and the display function associated with such input can be checked.
error log.
• Hold the MASTER TEMPO button pressed for about 10 seconds to display the version of each software item.
Ÿ•Mode for checking
The version operation
of each software item of the displayed
is also mechanical and
on the servo blocks
dot-matrix (using
display of the FLadisplay.
connected PC)
In •this
Themode, once
version yousoftware
of the have connected a PC via
for the MAIN, the section,
player CN301 connector, which
and operation is directly
section can beconnected
selectedto thebymechanism-control
one one by
microcomputer
pressing theonright
the or
MAIN Assy through
left (cross) button arepeatedly.
special device, operation of the mechanical and servo blocks can be checked.
B
! Mode for checking audio output (using a connected PC)

In this mode, once you have connected a PC via the CN201 connector, which is directly connected to the system control
microcomputer on the MAIN Assy Ver through
1.00
a special device, audio output can be checked.
Before entering this mode, it is necessary to disconnect the CN1101 connector on the MFLB Assy and remove the upper unit
(jog and display block), because the communication line is shared between audio output and display functions.
⁄ Mode for checking the load on the Jog dial

In this mode, the load (light/heavy) on the Jog dial while it is rotated is subjectively measured.
Selectable with the right or left (cross) button
PL 1.00
@ Mode for checking the error log
In this mode, the latest 16 errors can be checked. C
¤ Mode for checking the version of the software program

In this mode, the version of the software program for each microcomputer can be checked.
SUB 1.00
In the screen of the each software version, shows the region number on the top right of screen.
D
DVJ-X1 SERVICE MODE 02
MAIN : Ver 1.00

PLAYER : Ver 1.00
SUB : Ver 1.00
When the HYPER JOG MODE button is pressed while displaying the version indication screen, switch to the error log screen.
E
The screen shows the error log and the disc type selected when an error was generated. Up to 16 errors are
displayed, with No. 1 error the latest.
ERROR CHECK MODE
1 E-7202 DVD 9 E-7001 ERR
2 E-7201 CD 10 E-7002 ERR
3 E-7201 CD 11
4 E-8302 CD 12
5 E-8302 CD 13
6 E-8302 CD 14
7 E-8302 CD 15
8 E-9101 ERR 16
DVJ-X1 99
5 6 7 8
1 2 3 4
How to quit Service mode

Press the MASTER TEMPO button to quit Service mode.
A
List of error codes

When an error is detected, one of the following error codes is displayed on the FL display.
Error code Description Checkpoint

E-7001 ATAPI system (drive) error Check the connection with the player section.
E-7002 DMA FPGA device error
E-7003 CAP FPGA device error
E-7004 CAP FPGA memory error
B E-7005 VMC FPGA device error

E-7006 VMC FPGA memory error
Unrecoverable: Turn the power off. Displayed when a device error is reported by the
E-7007 AV1 device error
The error indication will be cleared. CPU during communication upon initialization.
E-7008 GSL device error Check the connection, power voltage, and clock
waveform of the device in failure.
E-7009 GSL memory error
E-7010 TI DSP device error
E-7011 MOT DSP device error
E-7012 TE4300 device error
E-7013 VDEC device error
E-7014 VDEC memory error
C
E-7017 AV1 memory error
E-7015 FPGA download error Unrecoverable: Turn the power off. Check the device and the serial-communication system.
The error indication will be cleared.
E-7016 "No ID number" input error Input the ID number.
E-7202 Incompatible region number The error indication is cleared when A disc having an incompatible region number was loaded.
the EJECT process is finished.
E-7201 TOC not readable
E-8301 Error during startup The error indication is cleared when Apart from abnormality of the player section,
E-8302 Error during playback the EJECT process is finished or defectiveness of the disc may be the cause.
startup is completed successfully.
E-8303 Other error of the player section
E-9101 Error in mechanical operations The error indication is cleared when
D the EJECT process is finished or Check the slot mechanical system.
LOAD IN is completed.
Warning indications
The following warning indications are displayed on the FL display.
Warning display Description

ROM ERROR This is displayed when any abnormality is detected in the program area of the flash memory.
DRIVE ERR This is displayed when any abnormality is detected in the player section during initialization.
E
NOT VIDEO FORMAT This is displayed when a DVD other than video-formatted DVDs (VR format, DVD-A, etc.) is loaded.
DISABLE DJ MODE This is displayed during DVD playback in DJ mode, while the areas that cannot be controlled in DJ mode are
being played back.
100 DVJ-X1
1 2 3 4
5 6 7 8
2. Mode for checking buttons and their indications, as well as the load on the JOG dial
• To enter this mode, while holding the TEMPO and RET. buttons pressed, turn on the power.
A
• When this mode is entered, "SERVICE" is displayed on the dot matrix section of the FL display.
Mode for checking buttons and their indications

• When the EJECT LOCK switch is unlocked, the mode is for checking buttons and their indications, and when the EJECT
LOCK switch is locked, the mode is for checking the load on the JOG dial.
• In this mode, when any button is pressed, the corresponding indication is displayed on the FL display, and the
corresponding LED lights up.
Controls Dot FL display Other part of the FL display LED lit
PLAY/PAUSE PLAY PLAY/PAUSE
CUE CUE CUE
IN/REALTIME CUE IN IN/REALTIME CUE B
OUT/OUT ADJAST OUT OUT/OUT ADJAST
RELOOP/EXIT RELOOP 3
EMERGENCY LOOP All dots lit on FL All dots lit on FL All dots lit on LED
CUE/LOOP CALL CALL 6
ENTER ENTER 7
HOT CUE (A) HOTCUE A HOT CUE(A) red
HOT CUE (B) HOTCUE B HOT CUE(B) red
HOT CUE (C) HOTCUE C HOT CUE(C) red
REC MODE REC MODE HOT CUE(A), (B), (C) red
PREVIOUS (4) PREVIOUS 0
NEXT (¢) NEXT - C
REV (1) REV 1 CARD
FWD (¡) FWD ¡ =
AUDIO AUDIO HOT CUE(C) amber
SUB.TITLE SUBTITLE HOT CUE(B) amber
ANGLE ANGLE HOT CUE(A) amber
DISPLAY DISPLAY HOT CUE(C) green
TEXT/WAVE TEXTWAVE HOT CUE(B) green
TIME MODE/AUTO CUE TIMEACUE HOT CUE(A) green
TITLE + TITLE + 2
TITLE - TITLE - 1
DELETE DELETE 4 D
MEMORY MEMORY 5 CARD
MENU MENU TEMPO WIDE
T.MENU T.MENU TEMPO ±16%
SETUP SETUP TEMPO ±10%
RET. RET. TEMPO ±6%
EJECT EJECT
STOP STOP
Cross button for left (2) LEFT Direction is also displayed in Area 0
Cross button for up (5) UP Direction is also displayed in Area 0
Cross button for right (3) RIGHT Direction is also displayed in Area 0
E
Cross button for down (∞) DOWN Direction is also displayed in Area 0
JOG MODE JOG MODE ! VINYL
TEMPO TEMPO TEMPO ±6%, ±10%, ±16%,WIDE
MASTER TEMPO MT MASTER TEMPO
TEMPO RESET T.RESET TEMPO RESET
HYPERJOG MODE HYPERJOG HYPER JOG
TOUCH SENSOR TOUCH SW ~
While the JOG dial is rotated in the forward direction JOG 3
While the JOG dial is rotated in the reverse direction 2 JOG
When DIRECTION is switched to reverse REV indication REV
When EJECT LOCK is locked *Mode for checking the load on the JOG dial EJECT LOCK indication
F
DVJ-X1 101
5 6 7 8
1 2 3 4
(FL DISPLAY) 8 : Dot matrix display

4 5
A
1 2 3 9 TOUCH/BRAKE, RELEASE/START, 6
TEMPO slider
0 =
-
C
Indications of read-in values for the TOUCH/BRAKE and RELEASE/START controls and TEMPO slider
The read-in values for the TOUCH/BRAKE and RELEASE/START controls and TEMPO slider are displayed as a bar in
Area 9 of the FL display:
Area "mloop" : As the TOUCH/BRAKE control is turned clockwise, the number of dots on the display increases.
Area "mcue" : As the RELEASE/START control is turned clockwise, the number of dots on the display increases.
Area "play ad" : As the TEMPO slider is moved toward the + side, the number of dots on the display increases.
Mode for checking the load on the JOG dial

This mode is entered when the EJECT LOCK switch is locked. In this mode, the maximum rotation speed of the JOG dial
D and the time required for changing rotation speeds are displayed.
0. 0 : 0ms
Time (msec)
Maximum rotation speed
Measurement method
• After locking the EJECT LOCK switch, rotate the JOG dial with full force, either clockwise or counterclockwise.
Then the number is displayed.
• If the maximum rotation speed is 7.0 times or more, the time required for rotation speeds decreasing from 3.0 times to
1.5 times is displayed.
• For the second measurement and afterwards, the average value of the measurement results is displayed.
E
Management value Adjust plate

Jog management value: 170 ± 25 (msec)
-3
To decrease -2 +2 To increase
the load -1 +1 the load
0
Load adjustment method

Remove the screw fixing the adjust plate, then screw it into the hole corresponding to the value (-1, -2, -3, +1, or +2)
for a load to be added:
-1, -2, -3 : To decrease the load
F +1, +2 : To increase the load
102 DVJ-X1
1 2 3 4
5 6 7 8
3. Serial control terminals

• The serial control terminals for checking the ID number and the player section are provided inside the rear panel A
(hidden inside the slit of the rear panel) and inside the main unit (6-pin connector).
• To use the terminals, a PC with an RS-232C serial communications terminal, and either of the special device for level
conversion dedicated for the hidden connector inside the slit of the rear panel or a special device for downloading, such
as the CDJ-1000, are required.
• Do NOT use both terminals simultaneously, because these terminals are internally connected.
The terminal is hidden inside the slit.

B
Y CB PB CR PR COMPOSITE
NORMAL
DJ
MODE
DIGITAL AUDIO OUT VIDEO OUT
OUT
CONTROL
SYNC IN
L S ID number label
R S
PREVIEW OUT
CN102
C
6-pin connector
4. How to input the ID number

• If error E-7016 is displayed, the ID number must be input.
• For inputting the ID number, a PC with an RS-232C serial communications terminal, the special device for level
conversion, and the ID data disc (a special DVD disc on which the ID-number data) are written are required.
This product is a player, please use a disc for recorder as ID data disc.
Procedures
1 Check the ID number. The 9-digit ID number is written on the label attached to the bottom of the main unit. D
2 Connect the RS-232C terminal of the PC and the DVJ-X1 using a special device. (See next page.)
• When the special device for level conversion is used, connect the card cable to the hidden connector inside the slit of
the rear panel.
• When a special device for downloading, such as the CDJ-1000, is used, open the bottom plate of the main unit to
reveal the 6-pin connector and connect the special device with the connector.
• As the hidden connector inside the rear panel and the 6-pin connector inside the main unit are internally connected,
they must not be connected simultaneously.
3 Start up the terminal software of the PC (communication speed: 4800 bps, parity: none, STOP bit: 1).
4 Turn on the power of the DVJ-X1. E

If error E-7016 is displayed, press the ENTER key on the PC several times to confirm that "R" is returned.
5 Enter "2MC" to confirm that "R" is returned. Use uppercase alphabetics for input.
6 Enter the 9-digit ID code then "ID" and confirm that "R" is returned.
If you type a wrong number for the ID code, type the correct numbers again.
7 Load the special DVD disc into the player.

Wait for the unit to start up then enter "IW" to confirm that "R" is returned.
If error E11 is returned, wait a few moments then enter "IW" again.
F
8 Enter "EJ" to eject the disc, then turn off the power of the DVJ-X1 then turn it back on. Check that no error is displayed.
DVJ-X1 103
5 6 7 8
1 2 3 4
[ Connection Diagram ]
A MAIN Assy
RS-232C Jig
CN102
RS-232C Jig Schematic Diagram
To. MAIN ASSY (CN102)

R2 CN3
10k DTA124
Q1
1 TXD
2 RXD
CN2
3 V+5V
+ 4 NC
1
C4 C5 +
10/50
C6
0.01 R3 2
X 5 NC
10/50 10k 6 GNDD
B2B-PH
To. Personal Computer (RS-232C)
1 16 B6B-PH
C1 +
10/50 2 15
3 14 NC
1
6 NC C2 + Q2
2 10/50
4 13
DTC124 X: Short Connector
C 7 5 12 NC
(DVJ-X1: OPEN)
3 6 11 NC
8
4 7 10
9 8 9
5 NC
C3
IC1
CN1 10/50 +
MAX1M
XM2C-0192-111 MAX232EPE
Parts List
SEMICONDUCTORS
IC1 : MAX232EPE
Q1 : DTA124
Q2 : DTC124
D CAPACITORS
C1, C2, C3, C4, C5 : CEAT100M50
C6 : CKSQYF103Z50
RESISTORS
R2, R3 : RD1/2VM103J
OTHERS
CN1 (RS-232C CONNECTOR) : XM2C-0192-111
CN2 (2P CONNECTOR) : B2B-PH
CN3 (6P CONNECTOR) : B6B-PH
E
5. Player test mode
• To use Player Test mode, a PC with an RS-232C serial communications terminal and the special device for level
conversion are required.
• Start up the terminal software of the PC and set as follows: Communication speed: 4800 bps, parity: none, STOP bit: 1.
• Turn on the power of the DVJ-X1 and wait until the "POWER ON" indication disappears. Then press the ENTER key on
the PC several times to confirm that "R" is returned.
• Then enter "1MC" to confirm that "R" is returned.
• Use uppercase alphabetics for input.
• Load the special DVD disc into the player then press the STOP button so that the player enters Stop mode.
F Then, the commands indicated in the list below can be received by the player.
104 DVJ-X1
1 2 3 4
5 6 7 8
The commands described here are for testing the mechanical and servo systems, and no audio or video output is available.
In the following list of commands, ?? indicates a decimal number. A
Command Name Description
BK Address Block During CD playback, address mode is set to block. During DVD playback, address mode is fixed at block.
TR Address Track During CD playback, address mode is set to track.
IX Address Index During CD playback, address mode is set to index.
TM Address Time During CD playback, address mode is set to time.
SA Start Up After turning on all the servos, the unit enters Pause mode on the innermost track.
??PL Play The unit traces the signals on the disc (but not audio or video playback) until it reaches the
designated address, then enters Pause mode. (?? indicates an address, and if the address is
not designated, the unit will not operate. Without address input, the unit will hang.)
PA Pause The unit enters Pause mode immediately.
B
??SE Search After searching for the designated location, the unit enters Pause mode.
RJ Reject After turning off all servos, the unit stops rotation of the disc.
OP Open The unit opens the disc tray and disables any further operation.
??EC Error Count The error rate is calculated.
?A Address Request During CD playback, the address (TNO:INDEX:AMIN:ASEC:AFRAME) is returned.
?B Block Number Request During CD playback, the block number (AMIN:ASEC:AFRAME) is returned.
During DVD playback, the block number is returned.
?I Index Number Request During CD playback, the index number (TNO:INDEX) is returned.
?R Track Number Request During CD playback, the track number (TNO) is returned.
?T Time Code Request During CD playback, the time code (AMIN:ASEC) is returned.
?Q TOC Information Request During CD playback, the TOC information (FTNO:ETNO:AMIN:ASEC:AFRAME) is returned. During DVD playback, the total C
capacity obtained from the lead-in is returned. (With 0?Q, the total capacity of the lower layer of a dual disc is returned.)
?E Error Rate Request The error rate is returned.

0TM All Servo Off All the servos are turned off.
1TM LD On/Off The output of the laser diode is toggled (ON/OFF) when this command is issued repeatedly.
2TM Focus Servo On/Off The focus servo is toggled (ON/OFF) when this command is issued repeatedly.
3TM Spindle On/Off The spindle servo is toggled (ON/OFF) when this command is issued repeatedly.
4TM Tracking Servo On/Off The tracking servo is toggled (ON/OFF) when this command is issued repeatedly.
6TM Address Read Periodic operation starts, and reading of the address data starts.
9TM Disc Search Data on disc detection and disc data necessary for the focus servo are collected.
10TM CD Select CD is selected. D
11TM DVD Select DVD is selected.
12TM Focus Position Adjust Focus-position adjustment is performed.
13TM Tracking Balance Adjust Tracking-balance adjustment is performed.
15TM Focus Gain Adjust Focus-gain adjustment is performed.
16TM Tracking Gain Adjust Tracking gain adjustment is performed.
18TM Focus Jump Up Focus jump to the upper layer of the disc is performed.
19TM Focus Jump Down Focus jump to the lower layer of the disc is performed.
?SP Spindle Set The step among the four preliminarily determined steps of the rotation speeds is set (0-3).
??RP RPM Set The rotation speed of the spindle (rpm) is designated.
?W Rotation Speed Request With ?W, "highest rotation speed/goal rotation speed" is returned, and with ?WO, "current playback-speed E
rate/current rotation speed" is returned.
?L Layer Number Request During DVD playback, the number of the current layer is returned.
?D Disc Type Request The disc type is returned: bit 0: with adaptor for 8-cm disc, bit 1: 8-cm disc, bit 2: opposite,
bit 3: dual, bit 4: multi-session, bit 5: RW, bit 6: WO, bit 7: DVD, bit 8: RVD + RW.
?V Version Number Request The version number is returned.
??MF Multi Jump Fwd The unit jumps by the designated number of tracks toward the outermost track.
??MR Multi Jump Rev The unit jumps by the designated number of tracks toward the innermost track.
NF Slider Move Fwd The slider is moved by about 11.1875 µm toward the outermost track.
NR Slider Move Rev The slider is moved by about 11.1875 µm toward the innermost track.
Note: This command moves a built-in player directly. Operation may become abnormal when executed this command during normal
playback. Please execute this command after setting to the STOP state by all means. F
DVJ-X1 105
5 6 7 8
1 2 3 4
<Supplements>
¶ How to designate an address for a search
A There are the following four ways of designating an address for a search:
Address Block
When the BK command is issued, the address mode is set to block (During CD playback: absolute time [AMIN:ASEC:
AFRAME], during DVD playback: sector).
Example: During CD playback: For searching 2 min 3 sec 4 frame, designate BK20304SE
During DVD playback: For searching 250000 sector, designate BK250000SE.
As the sector for the innermost track of a DVD is 196608 (30000 h = 0 LBA), a number less than this cannot be
designated.
Address Track
When the TR command is issued, the address mode is set to track. This command is available only for a CD.
Example: For searching the 5th piece of music, designate TR5SE.
B Address Index
When the IX command is issued, the address mode is set to index (TNO:INDEX). This command is available only for a CD.
Example: For searching Index 3 of the 2nd piece of music, designate IX203SE.
Address Time
When the TM command is issued, the address mode is set to time (absolute time, AMIN:ASEC). This command is available
only for a CD.
Example: For searching 2 min 3 sec, designate TM203SE.
Once the address mode is set, it will be retained until it is changed the next time.
¶ How to calculate the error rate (Error count)

The error rate between the current point and the designated address is calculated.
C Example: To calculate the error rate between 20 min 0 sec 0 frame and 21 min 0 sec 0 frame and to display the result
during CD playback: BK200000SE210000EC?E
To calculate the error rate between 40000H and 41000H and to display the result during DVD playback:
262144SE266240EC?E (designated in decimal)
¶ How to start up the servos manually

Servo operations can be controlled manually in detail.
Note that incorrect use of test-operation commands may damage the player.
To start up the servos manually, the following commands must be executed in the order shown here:
10TM : For starting CD, select CD. Select one or the other.
11TM : For starting DVD, select DVD.
D 1TM : To turn on the laser diode (CD)
9TM : To detect installation of a disc
3TM : To turn on the spindle (2000 rpm)
9TM : Disc-search
2TM : To turn on the focus servo
12TM : For rough focus-position adjustment
13TM : For tracking-balance adjustment
4TM : To turn on the tracking servo
12TM : For focus-position adjustment
15TM : For focus-gain adjustment
16TM : For tracking-gain adjustment
6TM : To start reading at an address
0TM : To turn off the servos
E
¶ Description of other commands
TOC Information Request
TOC information regarding a CD is in the following format:
Example: In case of 0116704307: Starting track No. = 01, Ending track No. = 16, Recorded time: 70:43:07
Multi Jump Fwd/Rev

The address is jumped by the designated number of tracks toward the innermost/outermost track of the disc (physical track,
not number of pieces of music).
Example: To jump by 100 tracks from the current point toward outermost track: 100MF
Slider Move Fwd/Rev

The slider is moved by about 11.1875 µm toward the outermost/innermost track. You can move the slider to your desired
F
position by executing this command repeatedly.
106 DVJ-X1
1 2 3 4
5 6 7 8
7.1.2 POWER ON SEQUENCE
Player section MAIN CPU CPU for the Operation section

A
Power on Power on Power on
Canceling reset of Canceling reset of Canceling reset of the

SODC (IC2100), Pin 45 CPU (IC111), Pin 193 CPU (IC3004), Pin 12
Initial setting Initial setting for the CPU Initial setting for the CPU
Initialization of the SDRAM

Initialization of "POWER ON" is indicated B
loading mechanism on the FL display.
Program transfer from

FLASH to SDRAM All LEDs, including the
Data and clock output buttons but excluding
from Pins 164 and 165 the REV LED, light up.
of the CPU (IC111).
Program transfer to the When data transfer to
FPGA the FPGA is finished, Long press processing
A disc can be loaded FPGA_DONE (Pin 125) of the key In the power ON
before communication becomes high.
between the main CPU Program transfer to the
and the player section DSP (IC505, IC506)
starts.
C
After a disc is loaded, loading Canceling reset of

and startup processes begin. peripheral devices
Once communication
Communications with the with the main CPU is
established, the
Operation section start. "POWER ON"
indication disappears.
Communications with the
ATAPI system start.
Input of statuses of keys,
Checking peripheral If the result of the check output of display data
is NG, error E70** is D
devices generated.
After a disc is loaded, loading Long press processing

and startup processes begin. of the key In the power ON
If a disc is loaded,
the playback process
starts.
Reading data, etc. Distinction CD

between
DVD/CD
DVD E
DVD playback CD playback

process process
DVJ-X1 107
5 6 7 8
1 2 3 4
Sequence of Starting Up the Drive
Note:
A Install a disc after turning the unit on.
Disc installation Detection by the Inside switch is Focus gain adjustment
performed only for the first disc.
Carriage shifted to the focus position Tracking gain adjustment
CD
Canceling offset for DVD
FE, TE, AS, PFENV, LNSC, and JIT Tracking open
Light emitted from the CD laser Tracking balance adjustment
Focus search, detection of disc presence,

Adjustment of tracking-error amplitude
B tentative judgment of medium type by
No disc present
measuring the distance between the focus
pseudo-S-curve waveform and the actual Off-track threshold adjustment
S-curve waveform
Disc present
Tracking close
Spindle starts rotating at 2,000 rpm. Unloading
Focus gain adjustment
CD DVD
Light emitted from the CD laser Light emitted from the DVD laser Tracking gain adjustment
Focus search
C After the medium type is judged according
to the disc reflectivity, FE, TE, AS, and Lens-error gain adjustment
RFENV amplification gains are switched.
Learning focus-error attenuation
Canceling offset for
FE, TE, AS, PFENV, LNSC, and JIT
Reading lead-in data:
CD: If the total duration of data areas in Yes
DVD the TOC is less than 30 minutes
Focus on
DVD: Depending on control data and disc
CD
capacity
Final judgment of CD/DVD by detecting

No
D a sync signal
Detection of the 8-cm adaptor
Coarse adjustment of focus position

CD
DVD
Offset adjustment of the tracking actuator After tracking open,
the spindle starts Searching for
rotating at 5,000 rpm. 0m01s time point
Tracking balance adjustment
Adjustment of tracking-error amplitude Spindle starts

Searching for 30000H rotating at 3,100 rpm.
E Off-track threshold adjustment
Measuring eccentricity
Tracking on
Accurate adjustment of focus position
Start of acquiring addresses
108 DVJ-X1
1 2 3 4
5 6 7 8
DVJ-X1 109
5 6 7 8
1 2 3 4
7.1.3 DVJ-X1 BLOCK CHART(DJ MODE)
A
DVD / CD
IC2000 SDRAM SDRAM

(AN22022A) 256M × 2 High-speed decoding of 64M × 4
FEP compressed video data
(MPEG2) is performed.
ATAPI IC903
B IC2100 IC701 IC304
(PD6449A)
(MN103S72F) (PE5337A) (XCS50-5PQ208C)
MPEG Video
SODC GSL DMA Controller
Decoder
1 Navigation function for DVD
High-speed decoding of 2 Superimposing characters and
IC2101 a frame onto the picture for
compressed audio data
(PEA006B8) preview video output
(Dolby digital, linear
1M Flash ROM
PCM, etc.) is performed. 3 Menu operations
4 Synchronized playback
IC505 IC305
IC2200 (TMS320DA150PGE160) (M65774BFPA)
(BD7905BFS) [DSP] 1-Chip DVD
C 6ch Driver Audio Decoder Decoder
DRIVE UNIT The following data are stored:

· Stream data
SDRAM
· Compressed audio data
64M × 1
· Audio data
1 Process of changing playback speed

SDRAM 2 Key control functions for
256M × 2 MASTER TEMPO
3 Detection of BPM and WAVE data
4 Production of CD digital output
D
IC113 IC506
(DYW1734-) (XCA56367PV150)
32M Flash ROM [DSP] Audio DSP
with SRAM
IC111
(HD6417709SHF200B)
CPU
A driver is built into the FL tube
for the main FL display.
IC3004 JOG FL
Main FL
E (PEG012A)
01 • 001 IC4001
Control CPU
000 : 00 : 00 FL Driver
with
&&&& 123
FL Controller
JOG (Turn Table)

Sensor
All Panel Keys
^ CUE
and
Switches
110 DVJ-X1
1 2 3 4
5 6 7 8
SDRAM SDRAM
SDRAM
256M × 6 256M × 6 It functions only for the
16M × 1
Progressive output in NTSC,
and does not function for the
Progressive output in PAL.
IC1106 IC1511
(XC2S150E-6PQ208C) (PM0033A) B
VIDEO OUT 1
[FPGA] Progressive
Video Memory Controller Encoder COMPONENT
(for Main Monitor)
Storing video data in memory cells
and outputting them according to
operation
IC1107 IC1502
VIDEO OUT 1
(XC2S150E-6PQ208C) (ADV7172KST)
(for Main Monitor)
[FPGA] Video Encoder
Video Capture C
1 Creation and display of thumbnails
2 Composition of animated pictures IC1506 VIDEO OUT 2
(IC1107), characters & frame (IC305), (ADV7172KST) (for Preview Monitor)
and thumbnails Video Encoder
3 Adjustment of the size of the output picture
SDRAM The only digital output signal available

64M × 1 during DJ mode is that of CD, and
subcodes are not attached.
AUDIO OUT
(DIGITAL) D
IC1513 IC1510 AUDIO OUT
(PD0274A) (PCM1742KE) (2ch Analog)
AQE IC Audio DAC
IC503
(TE4300PF) SD Memory
SD/MMC Memory Card I/F
Card Controller
: Video Signal Line

: Audio Signal Line (DVD)
: Audio Signal Line (CD)
DVJ-X1 111
5 6 7 8
1 2 3 4
7.1.4 DVJ-X1 BLOCK CHART(NORMAL MODE)
A
DVD / CD
IC2000 SDRAM
(AN22022A) 256M × 2
FEP
ATAPI
B IC2100 IC701 IC304
(MN103S72F) (PE5337A) (XCS50-5PQ208C)
SODC GSL DMA Controller As this chip serves as a single-chip
DVD decoder and processes both
video and audio signals, as with
general DVD players, DJ
IC2101
operations are not possible.
(PEA006B8)
1M Flash ROM
DVD
IC305
IC2200 (M65774BFPA)
(BD7905BFS) 1-Chip DVD
C 6ch Driver Decoder
DRIVE UNIT
SDRAM
64M × 1
SDRAM
256M × 2
CD
D
IC113 IC506
(DYW1734-) (XCA56367PV150)
32M Flash ROM [DSP] Audio DSP
with SRAM
IC111
(HD6417709SHF200B)
A driver is built into the CPU
FL tube for the main
FL display.
IC3004 JOG FL
Main FL
E (PEG012A)
01 • 001 IC4001
Control CPU
000 : 00 : 00 FL Driver
with
&&&& 123
FL Controller
JOG (Turn Table)

Sensor
All Panel Keys
^ CUE
and
Switches
F The switches and jog dial that are

operable during DJ operations are
disabled.
112 DVJ-X1
1 2 3 4
5 6 7 8
SDRAM
It functions only for the Progressive
16M × 1
output in NTSC, and does not
function for the Progressive
output in PAL.
IC1511
(PM0033A) B
VIDEO OUT 1
Progressive
Encoder COMPONENT
(for Main Monitor)
It only distributes video data.

The same video data are distributed
to the Main Video output and
Preview Video output.
IC1107 IC1502
VIDEO OUT 1
(XC2S150E-6PQ208C) (ADV7172KST)
(for Main Monitor)
[FPGA] Video Encoder
Video Capture C
IC1506 VIDEO OUT 2

(ADV7172KST) (for Preview Monitor)
Video Encoder
SDRAM For CD and DVD digital output. If the Stream output signals
64M × 1 in DTS or Dolby digital format are connected to an appropriate
amplifier, 5.1-channel surround sound is enabled.
AUDIO OUT
(DIGITAL)
D
IC1513 IC1510 AUDIO OUT
(PD0274A) (PCM1742KE) (2ch Analog)
AQE IC Audio DAC
IC503
(TE4300PF) SD Memory
SD/MMC Memory Card I/F
Card Controller
Operations that are enabled using the

SD Memory Card are not available in
Normal mode. E
: Video Signal Line

: Audio Signal Line (DVD)
: Audio Signal Line (CD)
DVJ-X1 113
5 6 7 8
1 2 3 4
7.1.5 DISASSEMBLY
Diagnosis of the MAIN Assy 1 Diagnosis of the control panel section

A 1 Remove the eight screws. 1 Remove the seven screws.
2 Open the bottom case Assy slightly with the MAIN Assy
attached so that it can swing open hinged at the bottom.
(As the flexible cable to be removed in Step 3 below is not
very long, be careful not to open the bottom case Assy too 1 1 1
far.)
1 1
1
B 1 1
Bottom case Assy
2
1 1
1 1 1
Front side
Bottom view
1 1
Front side
Bottom view
C
3 Disconnect the flexible cable. 2 Remove the two screws.
4 Hook the bottom case Assy onto the chassis, as shown in the
2 2
photo below.
D Rear view
4
MAIN Assy
3 While holding card ejector pressed, detach the control panel
section.
4
CN701
3
Card ejector
E
3
CN501
Note:
To reconnect the 40-pin flexible cable to the connector (CN701),
hold the flexible cable with both hands and push it straight in.
3
Diagnosis
114 DVJ-X1
1 2 3 4
5 6 7 8
Styling the flexible cable of the SDCB Assy

4 Hook the control panel section onto the chassis, as shown
in the photo below. A
Control panel section
4
B
1
CN2502
4
SDCB Assy
Lead tape R4
3 Fix the flexible cable to the hook with a
Diagnosis piece of lead tape R4.
4 Fold the flexible cable as shown in
the photo so that the cable will not
touch the drive.
PCB location of the control panel section
2 Pinch the flexible cable with the hook.
D
EJTB Assy MFLB Assy RSWB Assy
DIPB Assy
5 Fix the flexible cable to the lib section

with a piece of lead tape R4.
Lead tape R4
JFLB Assy
E
SLDB Assy LED1 Assy JOGB Assy LED2 Assy KSWB Assy
Bottom view
DVJ-X1 115
5 6 7 8
1 2 3 4
2 Jog section
A 1 Remove the five screws. 5 Remove the SW ring by removing the three screws.
2 Disconnect the flexible cable.
3 Remove the jog section by pulling it out toward front.
5 SW ring
Control panel section
5
1
5
1 1
B 2 SW spring 31
SW spring 31
3
1 1
Bottom view
C Jog section
6 Peel the sheet SW off.

4 Unhook the upper part of the jog section.
Sheet SW
4
Lower part of the jog section Upper part of the jog section Exchange
116 DVJ-X1
1 2 3 4
5 6 7 8
3 Player Section
Notes for replacing the sheet SW 1 Remove the earth plate by removing the four screws.
A
1 Do NOT warp the sheet SW.
2 No dirt or foreign object must be attached to the adhering 1
surface of jog holder 2. If glue remains on the adhering 1
surface, remove it completely using alcohol.
3 When gluing on a new sheet SW, properly position it so that
it will not ride on the rib of jog holder 2.
1
4 Evenly adhere the whole gluing face of the sheet SW,
including the contact, to jog holder 2, taking care that there
are no air bubbles in the glue. If there are air bubbles,
leaving dry spots on the sheet SW, replace the sheet SW 1
with a new one. Do NOT reuse the sheet SW.
1 B
5 Adhere the SW Cushion HH48/2 to their appointed positions.
6 Before plugging the flexible cable back into the connector of

the sheet SW, be sure to release the lock of the connector
of the JFLB Assy then lock it again after reconnection. Earth plate
As the earth plate for grounding is hooked to the front plate,

5 SW cushion HH48/2
×18
be careful not to bump it against the front plate when removing i
it.
C
2 Remove the mechanism holder plate by removing the four
screws.
3 Remove the six screws and one flexible cable.
4 Remove the player section.
Sheet SW
3
4 3 D
2
3 2
Jog holder 2
3 3
2 3
3
2
Mechanism holder plate E
Earth spring
A earth spring is attached between the mechanism holder

plate and the slot-in mechanism section. Be sure not to lose it.
DVJ-X1 117
5 6 7 8
1 2 3 4
4 Traverse mechanism G11 Assy-S
A
5 Remove the DVPL Assy by removing the two screws. 1 Remove the slot-in mechanism G5 Assy by unhooking the
four hooks.
DVPL Assy
1 1
5
5 5
1
1
B Bottom view 1
6 Disconnect the two connectors and three flexible cables.
DVPL Assy
6
6
Slot-in mechanism G5 Assy
6 6 6
C
2 Remove the screw.

3 Remove the SPCN Assy by unhooking the hook.
Bottom view 4 Disconnect the spindle motor flexible cable.

5 Disconnect the connector and the flexible cable.
6 Remove the traverse mechanism G11 Assy-S by removing
the three screws.
7 Remove the four float spring G11s.
D 8 Remove the four dampers.
6
SPCN Assy
9 Remove the slot-in mechanism section.
Slot-in mechanism
section
5
9
6
6 6
E
4 2
Damper 3 5
8
7
Float spring G11 Traverse mechanism G11 Assy-S
118 DVJ-X1
1 2 3 4
5 6 7 8
7 Remove the Weight G11 by removing the three screws. Cleaning the pickup lens A
8 Remove the INSW Assy and inside SW base by removing
the screw.
Before shipping out the product, be sure to clean the following

positions by using the prescribed cleaning tools :
Weight G11 7
Cleaning liquid : GEM1004
Cleaning paper : GED-008
7
7 B
Pickup lens C
Short-circuited points on the pickup

On the service part of the traverse mechanism G11 Assy-S, the
two points shown in the photo below are short-circuited by
soldering to prevent current overload. After replacing the
traverse mechanism G11 Assy-S with a new one, be sure to
INSW Assy Inside SW base finish wiring of the pickup flexible cable then open those circuits
by removing the solder.
Bottom view
Exchange DVD
CD
Bottom view
DVJ-X1 119
5 6 7 8
1 2 3 4
7.1.6 On Discharge of the Capacitor
If the power voltage of the capacitor (C52,C51,C5) in the SW POWER SUPPLY Assy is high (about 11 V) even one
minute after the power is turned off.
The voltage will be no danger of electric shock.
A C5 C51 C52
SIDE A
E
7.1.7 CLEANING
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:
Position to be cleaned Cleaning tools
Pickup leneses Cleaning liquid : GEM1004

Cleaning paper : GED-008
120 DVJ-X1
1 2 3 4
5 6 7 8
7.2 PARTS
7.2.1 IC
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
A
List of IC
AN22022A, PEG012A, MN103S71F, HD6417709SHF200B
AN22022A (DVPL ASSY : IC2000)

• FEP
Block Diagram
VHALF
VREF2
VREF1
AGCO
AGCG
GND3
GND1
OFTR
VCC3
VCC2
VCC1
BDD
B
28 27 32 31 27 22 42 41 38 45 15 19
LEVEL
LEVEL
Cont
Cont
DFLTON 23
BDD DFTR
DFLTOP 24
Dat Dat
AGC 8 DTRD
DCFLT 21 Cont
Vel Adj.
9 IDGT
REG SIF 10 SEN

RFENV 29
BST Cont 11 SCK
PEAK 30 HOLD EQ
FC Cont 12 STDI C
VGA
2 LPC1
3 LPCO1
LPC
AMP 4 LPC2
5 LPCO2
RFINP 34
RFINN 35
TESTSG 33
VFOSHORT 6
DCRF 26
14 TEOUT D
RFOUT 25
Cont
FEOUT 18
FBAL
SW Differential
Phase Mirror
Det. Det.
FBAL 7 FBAL ADD ADD
EO EO EO EO
ASOUT 16
DPP
ADD
20 RFDIFO E
ADD
AMP
S-Line
J-Line 20 JLINE
36 37 39 40 48 1 43 44 46 47
VIN5
VIN6
VIN7
VIN8
VIN11
VIN12
VIN1
VIN2
VIN3
VIN4
DVJ-X1 121
5 6 7 8
1 2 3 4
Pin Function
No. Pin Name Pin Function
1 VIN12 3-beam sub (CD) input 2
A
2 LPC1 Laser pin input (DVD head)
3 LPCO1 Laser drive output (DVD head)
4 LPC2 Laser pin input (CD head)
5 LPCO2 Laser drive output (CD head)
6 VFOSHORT VFOSHORT control
7 FBAL Focus balance control
8 DTRD Data read signal input of data slice (for RAM)
9 IDGT Gate signal input of data slice-address block (for RAM)
10 SEN Serial enable input
11 SCK Serial clock input
B
12 STDI Serial data input/output
13 JLINE JLINE current setting
14 TEOUT Tracking error signal output
15 GND3 Ground 3
16 ASOUT All addition signal output
17 VHALF VHALF voltage output
18 FEOUT Focus error signal output
19 GND1 Ground 1
20 RFDIFO Radial differential output
C 21 DCFLT Capacitor connection pin for filter output

22 VREF2 VREF 2 voltage output
23 DFLTON Filter amplifier inverting output
24 DFLTOP Filter amplifier non-inverting output
25 RFOUT RF all addition amplifier output
26 DCRF Filter pin for DC cut of RF addition amplifier
27 OFTR OFTR output
28 BDO BDO output
29 RFENV RF envelope output
30 PEAK Peak envelope detecting filter
D 31 AGCG AGC amplifier gain control
32 AGCO AGC amplifier level control
33 TESTSG TEST signal input
34 RFINP RF signal non-inverting input
35 RFINN RF signal inverting input
36 VIN5 RF input pin 1 of inside division into 4 (CD)
38 VCC2 Power supply pin 2 (5V)
E 41 VCC3 Power supply pin 3 (3.3V)
42 VREF1 VREF1 voltage output
43 VIN1 RF input pin 1 of inside division into 4 (DVD)
45 VCC1 Power supply pin 1 (5V)
48 VIN1 3-beam sub (CD) input 1
122 DVJ-X1
1 2 3 4
5 6 7 8
PEG012A (DIPB ASSY : IC3004)

• Control CPU with FL Controller
Pin Function
A
No. Mark Pin Name I/O Pin Function
1 P96 /ANEX1 /SOUT4 VOL0 I/O VINYL SPEED ADJUST input TOUCH/BRAKE AD port
2 P95 /ANEX0 /CLK4 VOL1 I/O VINYL SPEED ADJUST input RELEASE/START AD port
3 P94 /DA1 /TB4IN JOG1 I/O Not used (connect to JOG1)
4 P93 /DA0 /TB3IN JOG1 I/O Pulse period measurement processing
5 P92 /TB2IN /SOUT3 I/O
6 P91 /TB1IN /SIN3 I/O
7 P90 /TB0IN /CLK3 I/O
8 BYTE BYTE I Connect to Vss when does not use external data bus.
9 CNVss − Processor mode switch Single chip mode: connect to Vss (pull_down)
B
10 P87 /XCIN I/O Not used (connect to GND)
11 P86 /XCOUT I/O Not used (connect to GND)
12 XRESET I Reset input
13 Xout O Oscillator output (16MHz)
14 Vss − GND
15 Xin I Oscillator input (16MHz)
16 Vcc − +5V
17 P85 /XNMI I Not used (external pull-up resistor)
18 P84 /XINT2 I/O Not used (connect to Vcc)
19 P83 /XINT1 I/O Not used (connect to Vcc)
20 P82 /XINT0 I/O Not used (connect to Vcc) C
21 P81 /TA4IN /XU I/O Not used (connect to Vcc)
22 P80 /TA4OUT /U I/O Not used (connect to Vcc)
23 P77 /TA3IN JOG2 I/O Two-phase pulse signal input
24 P76 /TA3OUT JOG1 I/O Two-phase pulse signal input Up count (clockwise), down count (counterclockwise) at falling edge
25 P75 /TA2IN /XW I/O Not used (connect to Vcc)
26 P74 /TA2OUT /W I/O Not used (connect to Vcc)
27 P73 /XCTS2 /XRTS2/TA1IN/XV I/O Not used (connect to Vcc)
28 P72 /CLK2 /TA1OUT/V J_SCLK I/O Serial clock signal (about 400kHz) for JOGFL
29 P71 /RxD2 /SCL/TA0IN/TB5IN I/O Not used (set the Low to output for NC), N ch open-drain output port
30 P70 /TXD2 /SDA/TA0OUT J_SDO I/O Serial data signal for JOG FL N ch open-drain output port D
31 P67 /TXD1 FL_SDO I/O Serial data signal for operating FL
32 P66 /RxD1 I/O Not used
33 P65 /CLK1 FL_SCLK I/O Serial clock signal for operating FL (about 1.6MHz)
34 P64 /XCTS1 /XRTS1/XCLKS1 I/O Not used
35 P63 /TXD0 SDO I/O Communication with main MPU
36 P62 /RxD0 SDI I/O Communication with main MPU External pull-up resistor (Insert it before buffer)
37 P61 /CLK0 CLK I/O Communication with main MPU (about 1MHz)
38 P60 /XCTS0 /XRTS0 XCS I/O Communication with main MPU
39 P57 /XRDY /CLKOUT SRDY I/O Communication with main MPU External pull-down resistor (Insert it before buffer)
40 P56 /ALE I/O Not used (set the Low to output for NC) E
41 P55 /XHOLD I/O Not used External pull-down resistor
42 P54 /XHLDA FL_LAT I/O Latch signal for operating FL External pull-down resistor
43 P53 /BCLK FL_BK I/O Blank signal for operating FL External pull-up resistor
44 P52 /XRD J_XSTB I/O Strobe signal for JOG FL External pull-up resistor
45 P51 /XWRH /XBHE J_BLK I/O Blank signal for JOG FL External pull-up resistor
46 P50 /XWRL /XWR I/O Not used External pull-up resistor
47 P47 /XCS3 TCH I/O JOG touch sensor
48 P46 /XCS2 I/O Not used
F
DVJ-X1 123
5 6 7 8
1 2 3 4

A
51 P43 /A19 TEMPO6 I/O TEMPO 0 LED 1: Lighting/0: Lights out
54 P40 /A16 TEMPOWIDE I/O TEMPO 3 LED 1: Lighting/0: Lights out
55 P37 /A15 MMCL I/O CADE LED 1: Lighting/0: Lights out
56 P36 /A14 CUEL I/O CUE LED 1: Lighting/0: Lights out
57 P35 /A13 PLAYL I/O PLAY/PAUSE LED 1: Lighting/0: Lights out
58 P34 /A12 REVERSE I/O DIRECTION REV LED 1: Lighting/0: Lights out
59 P33 /A11 CGREEN I/O HOT CUE (C) green LED 1: Lighting/0: Lights out
60 P32 /A10 CRED I/O HOT CUE (C) red LED 1: Lighting/0: Lights out
B 61 P31 /A9 CANBER I/O HOT CUE (C) amber LED 1: Lighting/0: Lights out
62 Vcc +V5 − Power supply
63 P30 /A8(/-/D7) BGREEN I/O HOT CUE (B) green LED 1: Lighting/0: Lights out
64 Vss GND − GND
65 P27 /A7(/D7/D6) BRED I/O HOT CUE (B) red LED 1: Lighting/0: Lights out
66 P26 /A6(/D6/D5) BANBER I/O HOT CUE (B) amber LED 1: Lighting/0: Lights out
67 P25 /A5(/D5/D4) AGREEN I/O HOT CUE (A) green LED 1: Lighting/0: Lights out
68 P24 /A4(/D4/D3) ARED I/O HOT CUE (A) red LED 1: Lighting/0: Lights out
69 P23 /A3(/D3/D2) AANBER I/O HOT CUE (A) amber LED 1: Lighting/0: Lights out
70 P22 /A2(/D2/D1) TRESL I/O TEMPO RESET LED 1: Lighting/0: Lights out
C 71 P21 /A1(/D1/D0) MT I/O MASTER TEMPO LED 1: Lighting/0: Lights out
72 P20 /A0(/D0/-) VINYL I/O JOG MODE(VINYL) LED 1: Lighting/0: Lights out
73 P17 /D15 /XINT5 LOCK I/O EJECT LOCK SW
74 P16 /D14 /XINT4 XREV I/O DIRECTION SW
75 P15 /D13 /XINT3 I/O Not used
76 P14 /D12 JOGX2LED I/O HYPER JOG LED 1: Lighting/0: Lights out
77 P13 /D11 LIN I/O IN/REALTIME CUE LED 1: Lighting/0: Lights out
78 P12 /D10 LOUT I/O OUT/OUT ADJAST LED 1: Lighting/0: Lights out
79 P11 /D9 JOGX2SW I/O HYPER JOG SW
80 P10 /D8 I/O Not used
D 81 P07 /D7 I/O Not used (connect to GND)
82 P06 /D6 I/O Not used (connect to GND)
89 P107 /AN7 /XKI3 ADCT I/O Tempo slider input AD port
90 P106 /AN6 /XKI2 ADIN I/O Tempo slider input AD port
E 91 P105 /AN5 /XKI1 MODEL I/O Destination setting AD port
92 P104 /AN4 /XKI0 KEY4 I/O Key input AD port
93 P103 /AN3 KEY3 I/O Key input AD port
96 AVSS GND − GND for A_D converter
98 VREF +5V − Reference voltage input for A_D converter
99 AVcc +5V − Power supply input for A_D converter
100 P97 /XADTRG /SIN4 I/O Not used (set the Low to output for NC)
F
124 DVJ-X1
1 2 3 4
5 6 7 8
MN103S71F (DVPL ASSY : IC2100)

• SODC
Pin Function
A
1 P2 XDMUTE1 O Driver IC mute control
2 P3 XDMUTE2 O Driver IC mute control
3 P4/EXCNT0 ILMUSK I Connect to VSS
4 VDD3 VDD3 − Power supply (VD3V)
5 VSS VSS − GNDD
6 P5/EXCNT1 INSIDE I Inside SW input of servo mechanism (L: ON)
7 P6/NSPCCS GSW O PU LD lighting selection (L: DVD H: CD)
8 P7/FADR17 FADR17/NSP O Address output to FLASH ROM
9 P8/FADR18 P8/FADR18 O Address output to FLASH ROM
B
10 FADR11 FADR11 O Address output to FLASH ROM
12 VDD15 VDD15 − Power supply (VD1R5)
16 NWE NWE O Write enable output to FLASH ROM
19 DRAMVDD15 DRAMVDD15 − DRAM power supply (DRAMD1R5)
20 DRAMVSS DRAMVSS − GND for DRAM C
21 VSS VSS − GNDD
30 FADR0 FADR0 O Address output to FLASH ROM D
31 VSS VSS − GNDD
33 FDT0 FDT0 I/O Data input/output to FLASH ROM
40 FDT7 FDT7 I/O Data input/output to FLASH ROM E
41 NCE NCE O Chip enable output to FLASH ROM
43 NOE NOE O Output enable to FLASH ROM
44 MMOD MMOD I Connect to VSS
45 NRST NRST I Hardware reset input
46 VSS VSS − GNDD
47 SCLOCK SCLOCK I/O NC
48 SDATA SDATA I/O NC
49 TxD/EXTRG0/MDATA TXD I/O NC
F
DVJ-X1 125
5 6 7 8
1 2 3 4

50 RxD/EXTRG1/MCLOCK RXD I/O NC
A
52 OSCI OSCI I Oscillator input
53 OSCO OSCO O Oscillator output (16.93MHz)
54 VSS VSS − GNDD
55 DRV0 DRV0(VRCAP) O NC
56 DRV1 DRV1(SPDRV) O Spindle motor control
57 DRV2 DRV2(FBAL) O Focus balance control
58 DRV3 DRV3(TBAL) O NC
59 DRV4 DRV4(STPM1P) O Stepping motor control
60 DRV5 DRV5(STPM1N) O Stepping motor control
B 61 DRV6 DRV6 O NC
62 DRV7 DRV7 O NC
63 VSS VSS − GNDD
64 DRV8 DRV8(FCSG) O NC
65 DRV9 DRV9 O PU monitor current DVD selection (H: ON, L: OFF)
66 DRV10 DRV10 O PU monitor current CD selection (H: ON, L: OFF)
67 DRV11 DRV11(LOAD) O Loading motor control
68 DRV12 DRV12(FEPCK) O Clock output to FEP
69 DRV13 DRV13(FEPDT) I/O Data input/output to FEP
70 DRV14 DRV14(FEPEN) O Enable output to FEP
C 71 DRAMVSS DRAMVSS − GND for DRAM
72 DRAMVDD15 DRAMVDD15 − DRAM power supply (DRAMD1R5)
73 DRAMVDD33 DRAMVDD33 − Power supply (VD3V)
75 FG FG I Spindle motor FG input
76 TX TX O NC
78 VSS VSS − GNDD
79 TSTSG TSTSG O EQ calibration signal to FEP
80 VFOSHORT VFOSHORT O VFO short control
D 81 JLINE JLINE O NC
82 BDO BDO I BDO (black dot out) input
83 OFTR OFTR I OFTR (off track) input
84 AVSSD AVSSD − GNDA
85 ROUT ROUT O NC
86 LOUT LOUT O NC
87 AVDDD AVDDD − Power supply (VA3V)
88 VCOF VCOF I VCO control voltage
89 TRCRS TRCRS I Input for TRCRS (track cross) generation
90 AVDDC AVDDC − Power supply (VA3V)
E 91 WBLIN WBLIN I Connect to VSS
92 CSLFLT CSLFLT I NC
93 RFDIF RFDIF I NC
94 AVSSC AVSSC − GNDA
95 PLFLT2 PLFLT2 I Connect a capacitor for PLL
96 PLFLT1 PLFLT1 I Connect a capacitor for PLL
97 AVSSB AVSSB − GNDA
98 ARF ARF I RF+ input
99 NARF NARF I RF- input
100 VHALF VHALF I Reference voltage (1.65V) input
F
126 DVJ-X1
1 2 3 4
5 6 7 8

101 RVI RVI I VREFH reference voltage/current control
A
102 VREFH VREFH I Reference voltage (2.2V) input
103 DSLF2 DSLF2 I Connect a capacitor for DSL (data slicer)
104 DSLF1 DSLF1 I Connect a capacitor for DSL (data slicer)
105 AVDDB AVDDB − Power supply (VA3V)
106 JITOUT JITOUT O Jitter monitor output
107 AVDDA AVDDA − Power supply (VA3V)
108 TECAPA TECAPA I NC
109 AD0 AD0(FE) I Focus error input
110 AD2 AD2(AS) I RFAS input
111 AD1 AD(TE) I Tracking error input
112 AD3 AD3(RFENV) I RF envelope input B
113 AD4 AD4(RFDIF) I Radial differential input

114 AD5 AD5(FEDRV) I Focus drive input
115 AD6 AD6(TEDRV) I Tracking drive input
116 AD7 AD7(T+) I Connect to VSS
117 AD8 AD8(T-) I Connect to VSS
118 AVSSA AVSSA − GNDA
119 PWM0 PWM0 O Focus drive control
120 PWM1 PWM1 O Tracking drive control
121 VSS VSS − GNDD
122 VDD3 VDD3 − Power supply (VD3V) C
123 IDGT IDGT O NC
124 DTR DTR O NC
125 MONI0/P9 BUSY/MONI0 I/O Monitor output
126 MONI1/P10 NAMUTE/MONI1 I/O Monitor output
127 MONI2/P11 NDMUTE1/MONI2 I/O Monitor output
128 MONI3/P12 NDMUTE2/MONI3 I/O Monitor output
129 MSTPOL/MONI4 MSTPOL/MONI4 I
130 DASPST/MONI5 DASPST/MONI5 I Connect to VSS
131 NEJECT/MONI6 NEJECT/MONI6 O NC
132 NTRYCL/MONI7 NTRYCL/MONI7 O NC D
133 DMARQ DMARQ O DMA request output to the host
134 NIOWR NIOWR I Host write input
137 NIORD NIORD I Host read input
138 IODRY IODRY O Ready output to the host
139 NDMACK NDMACK I Host DMA acknowledge input
140 INTRQ INTRQ O Interruption output to the host
141 NIOCS16 NIOCS16 O Data bus width selection
142 DA1 DA1 I Address input E
143 NPDIAG NPDIAG I/O
144 DA0 DA0 I Address input
147 DA2 DA2 I Address input
148 NCS1FX NCS1FX I Chip select input
149 NCS3FX NCS3FX I Chip select input
150 NDASP NDASP I/O
151 HDD15 HDD15 I/O Data input/output
F
DVJ-X1 127
5 6 7 8
1 2 3 4

A 152 HDD0 HDD0 I/O Data input/output
B 162 HDD11 HDD11 I/O Data input/output
C 172 VDDH VDDH − Power supply (VD5V)

173 NRESET NRESET I Reset input from the host
174 MASTER MASTER I Connect to VSS
175 P0/SERIAL LPS1 I Loading mecha SW input
176 P1/SERIAL LPS2 I Loading mecha SW input
128 DVJ-X1
1 2 3 4
5 6 7 8
HD6417709SHF200B (MAIN ASSY : IC111)

• CPU
Pin Function A
No. Pin Name I/O Pin Function No. Pin Name I/O Pin Function
1 MD1 I Clock mode setting 48 D4 I/O Data bus
2 MD2 I Clock mode setting 49 D3 I/O Data bus
3 Vcc-RTC − Power supply for RTC (2.0V) 50 D2 I/O Data bus
4 XTAL2 O NC 51 D1 I/O Data bus
5 EXTAL2 I Vcc 52 D0 I/O Data bus
6 Vss-RTC − Power supply for RTC (0V)*1 53 A0 I/O Address bus
7 NMI I pull down 54 A1 I/O Address bus
8 TI_BSREQ I Input data request of TI DSP 55 A2 I/O Address bus
9 TI_PCMREQ I Output data request of TI DSP 56 A3 I/O Address bus B
10 − I pull-up 57 VssQ − Power supply for input/output (0V)
11 − I pull-up 58 A4 I/O Address bus
12 DIS_REQ I Reception completion interrupt of operation block data 59 VccQ − Power supply for input/output (3.3V)
13 D31 I/O Data bus 60 A5 I/O Address bus
19 VssQ − Power supply for input/output (0V) 66 A11 I/O Address bus C
21 VccQ − Power supply for input/output (3.3V) 68 A13 I/O Address bus
22 D24 I/O Data bus 69 VssQ − Power supply for input/output (0V)
24 D22 I/O Data bus 71 VccQ − Power supply for input/output (3.3V)
27 Vss − Power supply (0V) 74 A17 I/O Address bus
29 Vcc − Power supply (2.0V) 76 A19 I/O Address bus D
32 D16 I/O Data bus 79 − − −
33 VssQ − Power supply for input/output (0V) 80 A22 I/O Address bus
34 D15 I/O Data bus 81 − − −
35 VccQ − Power supply for input/output (3.3V) 82 A23 I/O Address bus
36 D14 I/O Data bus 83 VssQ − Power supply for input/output (0V)
38 D12 I/O Data bus 85 VccQ − Power supply for input/output (3.3V)
E
40 D10 I/O Data bus 87 XBS − Bus cycle start signal
41 D9 I/O Data bus 88 RD − Read strobe
42 D8 I/O Data bus 89 XWE0/DQMLL − Write strobe
43 D7 I/O Data bus 90 XWE1/DQMLU − Write strobe
44 D6 I/O Data bus 91 XWE2/DQMUL − Write strobe
45 VssQ − Power supply for input/output (0V) 92 XWE3/DQMUU − Write strobe
46 D5 I/O Data bus 93 RDWR − Read/Write
47 VccQ − Power supply for input/output (3.3V) 94 AUDSYNC − Use with JTAG pin
DVJ-X1 129
5 6 7 8
1 2 3 4
A
95 VssQ- − Power supply for input/output (0V) 142 GSL_XIRQS I GSL XIRQS interruption
96 XCS0 O Chip select 0 143 GSL_XIRQ I GSL XIRQ interruption
97 VccQ − Power supply for input/output (3.3V) 144 SHMD0 − Clock mode setting
98 XCS2 O Chip select 2 145 Vcc-PLL1 − Power supply for PLL1 (2.0V)
99 XCS3 O Chip select 3 146 CAP1 − External capacitor pin for PLL1
100 XCS4 O Chip select 4 147 Vss-PLL1 − Power supply for PLL1 (0V)*2
101 XCS5 O Chip select 5 148 Vss-PLL2 − Power supply for PLL2 (0V)*2
102 XCS6 O Chip select 6 149 CAP2 − External capacitor pin for PLL2
103 P_XI O Progressive/interlace switch 150 Vcc-PLL2 − Power supply for PLL2 (2.0V)
B
104 XCSPRO2 O Chip select output for PM0033A 151 AUDCK − Use with JTAG terminal
105 CKE O CKE(SDRAM) 152 Vss − Power supply (0V)
106 XRAS3L O RAS3L(SDRAM) 153 Vss − Power supply (0V)
107 AV1_RST O AV-1 reset (H: reset) 154 Vcc − Power supply (2.0V)
108 CASL O CASL(SDRAM) 155 XTAL − XTAL connection pin
109 VssQ − Power supply for input/output (0V) 156 EXTAL − XTAL connection pin GND connection
110 MOT_RST O Reset output for Motorola DSP (H: reset) 157 TI_PCMACK O TI DSP output data acknowledge
111 VccQ − Power supply for input/output (3.3V) 158 TI_BSACK O TI DSP input data acknowledge
112 TI_RST O Reset output for TI DSP (H: reset) 159 FPGA_PRG O PRG for FPGA configration
113 VDEC_RST O Reset output for MPEG decoder (H: reset) 160 XIRQOUT O −
C 114 XDACK0 O DMA acknowledge 0 161 VssQ − Power supply for input/output (0V)
115 XDACK1 O DMA acknowledge 1 162 CKIO I Clock input (66MHz)
116 AQE_RST O PD0274A reset (H: reset) 163 VccQ − Power supply for input/output (3.3V)
DJ, normal CD mode/X normal DVD Serial data output for FPGA
117 AUDIO_SEL O 164 TxD0 O
(AV-1) mode switch configration/PM0033A
Serial clock output for FPGA
118 44/48 O 44.1/X48K selection 165 SCK0 O
configration/PM0033A
119 MUTE O Audio output stage mute (H: mute on ) 166 − − −
120 TDO − Use with JTAG terminal 167 − − −
121 BACK O NC 168 TXD2 O RS-232C communication output
122 BREQ I pull up 169 − − −
D 123 XWAIT I Hardware wait request 170 − − −
124 RESETM I pull up 171 MODE_SW I Normal mode/XDJ mode switching SW
125 FPGA_DONE I DONE for FPGA configration 172 − − −
126 RY/XBY I Connect to flash ROM 173 Vss − Power supply (0V)
127 ASEMD0 − Use with JTAG terminal 174 RxD2 I RS-232C communication input
128 ASEBRKAK − Use with JTAG terminal 175 Vcc − Power supply (2.0V)
129 FPGA_XINIT I INIT for FPGA configration 176 AV1_XINT2 I AV-1 INT2 interruption
130 AUDATA[3] − Use with JTAG terminal 177 VQE_RST O Reset of PM0033A and ADV7172 (H: reset)
131 AUDATA[2] − Use with JTAG terminal 178 DMA_RST O Reset output for DMA FPGA (H: reset)
132 Vss − Power supply (0V) 179 CAP_RST O Reset output for capture FPGA (H: reset)
E 133 AUDATA[1] − Use with JTAG terminal 180 VMC_RST O Reset output for VMC FPGA (H: reset)
134 Vcc − Power supply (2.0V) 181 VssQ − Power supply for input/output (0V)
135 AUDATA[0] − Use with JTAG terminal 182 CARD_RST − TE4300 reset (H: reset)
136 XTRST − Use with JTAG terminal 183 VccQ − Power supply for input/output (3.3V)
137 TMS − Use with JTAG terminal 184 − O −
138 TDI − Use with JTAG terminal 185 CAP_XINT I Capture FPGA interruption
139 TCK − Use with JTAG terminal 186 CARD_XINT I TE4300 interruption
140 VDEC_XINT I MPEG2 decoder interruption 187 DMA_XINT I DMA FPGA interruption
DONE signal selection (1: all, 0: DMA
141 AV1_XINTR I AV-1 INTR interruption 188 DONE_SEL I
FPGA only)
F
130 DVJ-X1
1 2 3 4
5 6 7 8
A
189 GSL_RST O GSL reset (H: reset) 199 MOT_EMPTY I Motorola FIFO empty signal input(EMPTY: High)
190 − − − 200 − I −
191 XDREQ0 I DMA request 0 201 − I −
192 XDREQ1 I DMA request 1 202 − I −
193 XRESET I Reset input 203 − I −
Chip active/hardware standby request
194 CA − 204 − I −
195 MD3 − Bus width setting for area zero 205 AVcc(3.3V) − Power supply for analog (3.3V)
196 MD4 − Bus width setting for area zero 206 − I −
197 MD5 − Endian setting 207 XTEST I pull-up B
198 AVss − Power supply for analog (0V) 208 AVss − Power supply for analog (0V)
GSL expansion I/O

Pin Port Name Initial setting Function with DVJ
AF8 − − −
AF9 − − −
AE8 SQUEEZ OUT At squeeze: High (external pull-down)
AE9 LETTER OUT At letter: High (external pull-down)
AD8 − − − C
AD9 − − −
AC8 − − −
AC9 − − −
DVJ-X1 131
5 6 7 8
1 2 3 4
8. PANEL FACILITIES
Operation panel
A
Buttons and controls with the mark are disabled when the mode select switch is set to NORMAL.
Buttons and controls with the mark are disabled when the mode select switch is set to DJ.
7. STOP button
Stops disc playback. When the eject/stop mode
1 2 3 4 5 6 7 8 9 10 select switch is set to LOCK, playback will not
40 41 42 43 44 45 46 47 stop unless the PAUSE mode is set first.
8. Eject/stop mode select switch
(UNLOCK/LOCK)
UNLOCK: If the EJECT (0) button is pressed
during playback, the disc stops and is ejected.
48 If the STOP button is pressed during playback,
49 the disc playback stops.
B 50 LOCK: If the EJECT (0) button is pressed dur-
51 ing playback, the disc will not be ejected. To
52 eject the disc, set the unit to pause, then press
53 the EJECT (0) button. Likewise, playback will
not stop if the STOP button is pressed during
39 54
playback; to stop disc playback, set the unit to
11 pause, then press the STOP button.
9. EJECT (0) button
38 12 When this button is pressed, disc rotation stops
and the disc is ejected from the loading slot. If
13 the eject/stop mode select switch is set to the
37 14 LOCK position, the disc will not be ejected un-
less the unit is set to pause before pressing the
15
36 EJECT (0) button
16 10. Mode select switch
C 35 17 (MODE NORMAL/DJ)
Located on the rear panel.
34 18 11. TOUCH/BRAKE response dial
Adjusts the disc deceleration speed (time to
playback stop) when the jog dial’s top surface
33 is touched with jog mode set to VINYL ON. Ro-
19 tate the dial counterclockwise to stop playback
32 quickly, and rotate dial clockwise to cause
31 slower deceleration.
12. RELEASE/START response dial
30 Adjusts the disc acceleration speed (playback
29 startup time) when the jog dial’s top surface is
released with jog mode set to VINYL ON. Ro-
D tate the dial counterclockwise to restart play-
28 back quickly, and rotate dial clockwise to cause
26 25 24 23 22 21 20 slower acceleration.
13. HYPERJOG MODE button/indicator
27 When hyper jog mode is set to ON with jog mode
set to VINYL ON, turning the jog dial causes the
rate of change of image and sound to increase
to 2x the rate of changed normally produced
(when the hyper jog mode is OFF).
1. POWER OFF (—)/ON (_) switch
Located on the rear panel. 14. JOG MODE select button
2. LOOP IN/REALTIME CUE button/indicator Each time pressed, sets VINYL mode alternately ON/OFF.
Real time cue VINYL mode ON: If surface of jog dial is touched during playback,
Loop-in point input playback stops, and if the dial is then rotated, image and sound are
3. LOOP OUT/OUT ADJUST button/indicator output in response to the amount of rotation. (if the angled surface
E Loop-out point input of the jog dial is rotated without touching the top, pitch bend opera-
Loop-out point adjust tion is enabled.)
4. RELOOP/EXIT button The current jog mode is memorized even when power is turned
5. EMERGENCY LOOP button off.
When this button is pressed, the current point is set as a loop-in VINYL mode OFF: The above operations are disabled even when
point; a loop-out point is set automatically and loop play begins be- the jog dial’s surface is touched.
tween the two points. 15. VINYL mode indicator
6. CUE/LOOP CALL button Lights when the jog mode is set to VINYL mode.
Press to turn cue point navigation mode ON/OFF. 16. TEMPO control range select button
Each time this button is pressed, the TEMPO control slider’s vari-
able range changes (±6%, ±10%, ±16%, WIDE).
When WIDE is selected, the variable range is +70 to –100% for DVD
playback, and ±100% for CD playback.
132 DVJ-X1
1 2 3 4
5 6 7 8
17. TEMPO control range indicator (±6, ±10, ±16, WIDE) 40. TIME MODE/AUTO CUE button
When control range is set to ±6%, the ±6 indicator lights. TIME MODE:
When control range is set to ±10%, the ±6 and ±10 indicators Each time the button is pressed, the time display switches alter- A
light. nately between playback elapsed time and remaining time (REMAIN).
When control range is set to ±16%, the ±6, ±10 and ±16 indica- ¶The time mode remains set in memory even when power is turned
tors light. off.
When control range is set to WIDE, the ±6, ±10, ±16 and WIDE AUTO CUE:
indicators light. Hold depressed for one second or more to set/release the auto cue
18. MASTER TEMPO button/indicator function.
Each time this button is pressed, the master tempo function turns Hold depressed for five seconds or more to switch the auto cue
alternately ON/OFF. level .
19. TEMPO control slider ¶The auto cue ON/OFF setting and auto cue level remains set in
When pulled forward (+), playback tempo is accelerated, and when memory even when power is turned off.
pushed away (–), tempo is slowed. 41. TEXT/WAVE select button
20. TEMPO RESET indicator When pressed in DJ mode, the display alternates between WAVE
When lighted, indicates that the playback tempo is set to normal display and CD-TEXT display (disc title / track title).
tempo “0”, regardless of the position of the TEMPO control slider. When pressed in NORMAL mode, alternates between CD-TEXT disc B
21. TEMPO RESET button title / track title display.
Pressing this button instantly resets the playback tempo to “0” (nor- 42. DISPLAY button
mal tempo), regardless of the current position of the TEMPO control When pressed in DJ mode, turns the hot cue, cue point, and play-
slider. Press the button once again to cancel the reset. back time guide display ON/OFF on the monitor connected to the
22. Jog dial display preview video output connector.
23. Jog dial (FWD+/REV–) When pressed in NORMAL mode, turns the disc information guide
display ON/OFF.
24. Disc loading slot
÷ When power is switched ON, the display function defaults to ON
25. Forced eject hole when the unit is in the DJ mode, and OFF (no display) in the NOR-
26. Memory card eject button MAL mode.
Press to remove memory card. 43. ANGLE button
Do not press when the memory card indicator is lighted.
Press to change the viewing angle during DVD playback (on sup-
27. Memory card slot ported discs only).
28. Memory CARD indicator ÷ In DJ mode, when the angle is changed both video and audio C
Lights when unit is accessing the memory card. playback temporarily stop (due to writing to buffer memory).
Do not remove memory card or turn off power when this indicator 44. SUBTITLE button
is lighted. During DVD playback, press to alternately turn subtitle display ON/
29. PLAY/PAUSE indicator OFF (on supported discs only).
Lights during playback, and flashes during pause mode. This function is disabled in DJ mode.
30. PLAY/PAUSE (3/8) button 45. AUDIO button
31. CUE indicator During DVD playback, press this button to change language or audio
Lights to indicate a cue point has been set, except during search channel (on supported discs only).
mode. Flashes during pause mode. ÷ In DJ mode, when the language/audio channel is changed, both
32. CUE button video and audio playback temporarily stop (due to writing to buffer
Cue point setting memory).
Back cue 46. DELETE button
Cue point sampler Press to delete cue points and loop points recorded in SD memory
33. Manual search buttons (REV1, FWD 1) card. D
34. Track search buttons 47. MEMORY button
(PREVIOUS4 , NEXT¢ ) Press to store cue points or loop points in SD memory card.
Use to return or advance play (unit of movement is by tracks when 48. Display
playing CDs, and by chapters when playing DVDs). 49. MENU button
During DVD playback, use to return to menu page or change page. Press to display DVD menu.
35. REV indicator 50. Top menu (T.MENU) button
Lights when direction select switch is set to reverse. Press to display a DVD’s top menu level.
36. DIRECTION FWD/REV select switch 51. SETUP button
Set to REV position for reverse playback. Press to display the setup menu.
37. HOT CUE REC MODE button 52. Return (RET.) button
Press to select the HOT CUE button’s function (record/call). When setup or other menus are displayed, press this button to re-
Defaults to call mode when power is switched on. turn to the previous menu or item.
38. HOT CUE (A, B, C) buttons/indicators 53. Cursor button (2/3/5/∞)
A, B, or C indicator lights red to indicate hot cue point record mode. Press to select cue points navigation and DVD menu settings. E
A, B, or C indicator lights green for hot cue point, and orange for hot 54. ENTER button
cue point; when an indicator is lighted, call mode is enabled for that Press to confirm cue point navigation and various DVD input set-
point; pressing the button initiates playback from the hot cue point. tings.
When indicator is not lighted, no hot cue point is recorded.
39. Title search buttons (TITLE +/–)
During DVD playback, titles are forwarded or reversed in the direc-
tion corresponding to the button pressed.
DVJ-X1 133
5 6 7 8
1 2 3 4
Display
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
29 28 27 26 25 24 23 22 21 20 19 18 17 16
B 1. Title number (TITLE 00-99) 18. BPM counter display

Indicates the DVD title number. Lights to indicate the beats per minute (BPM) of the currently play-
Not displayed during CD playback. ing track. Some tracks may not be measurable with the automatic
2. Chapter number (CHP 000-999) BPM counter.
Indicates the DVD chapter number. Does not light in NORMAL mode.
“CHP” is not displayed during CD playback. 19. Dot matrix display (50x7 dots)
3. Track number (TRACK 00-99) Used to display CD TEXT, WAVE display, guide messages and other
Indicates CD track number. data. In the case of CD TEXT, the maximum number of alpha-nu-
“TRACK” is not displayed during DVD playback. meric characters that can be displayed is 72 for disc titles and 48 for
4. Prohibited indicator ( ) track titles (when a display exceeds 9 characters in length, the dis-
Some DVD discs or players do not support certain functions or op- play will scroll). In the case of WAVE display, the varying volume
erations; if an effort is made to perform such operations, this indica- levels of the currently playing track are displayed, with the track sized
tor appears for about 2 seconds. to fit into the entire 50-dot display width.
5. Angle indicator ( ) For guide messages, “Dot Matrix Guide Display Mes-sages”.
During DVD playback, this mark appears to indicate a scene with
C 20. Play address display
variable angle.
6. Auto cue (A.CUE) indicator Displays a bar graph to allow an immediate visual grasp of the elapsed
Lights when auto cue is ON. Does not light during NORMAL mode. and remaining playing time of the currently playing track. The full
7. Remaining time (REMAIN) indicator scale bar length indicates the full track length.
Indicates that the current numerical display is of a track’s remaining The bar graph is off at the beginning of the track, and lights from
time. left to right.
The bar graph is lighted at the beginning of the track, and goes out
8. SRS indicator ( )
from left to right.
Lights when TruSurround function is selected. This function is disa-
When the remaining playing time falls below 30 seconds, the bar
bled in DJ mode.
graph flashes slowly; when less than 15 seconds are left, the bar
9. Disc indicator ( ) graph flashes quickly.
Lights during display of a CD TEXT disc title.
21. Cue memory indicator (M.CUE)
10. Minutes display (000-999 M) The selected chapter or track’s cue memory position is indicated by
11. Seconds display (00-59 S) the indicators beneath the play address display. Even if multiple
D 12. Frame display (00-74 F) memory points are located within the same block, only a single indi-
Display audio frame numbers. 75 frames are equivalent to one sec- cator lights. Does not light in NORMAL mode.
ond of normal play. Not displayed in NORMAL mode. 22. Loop memory indicator (M.LOOP)
13. Video frame display (00-29 VIDEO F) Displays the loop memory position for the selected track immedi-
Lights during DVD playback in DJ mode. 30 frames are equivalent to ately above the playback address display. Even if multiple memory
one second. Video frame display does not appear during CD play- points are located within the same block, only a single indicator lights.
back and in NORMAL mode. Does not light in NORMAL mode.
Since this unit controls video frames (1/30 second) based on the 23. RELOOP indicator
audio frame (1/75 second), combining the two will result in a maxi- Lights when loop-in points and loop-out points have been recorded
mum deviation of 1 frame. and loop playback is possible, as well as during loop play operation
14. TEMPO indicator itself.
Displays tempo variation produced when TEMPO control slider is Does not light in NORMAL mode.
operated. 24. EMERGENCY LOOP indicator
15. EJECT LOCK indicator Lights during loop operation in emergency loop mode.
E Lights when eject/stop mode select switch is set to LOCK position. Does not light in NORMAL mode.
If the EJECT (0) button or STOP button is pressed when this indica- 25. DTS indicator
tor is lighted, the indicator will flash for about 2 seconds. Lights during playback when DTS audio has been selected.
16. Tempo control range display (±6, ±10, ±16, WIDE) Not supported in DJ mode.
Lights to indicate the TEMPO control slider’s variable range as se- 26. GUI indicator
lected with the tempo control range select button. Does not light in Lights when setup menu, image adjust, disc information and other
NORMAL mode. onscreen menus are displayed.
17. Master tempo indicator (MT) 27. Dolby Digital indicator ( 2 D)
Lights when master tempo function is ON. Lights during playback when Dolby Digital audio has been selected.
Does not light in NORMAL mode. 28. Disc type indicator (DVD/CD)
Lights to indicate the type of disc being played.
29. Reverse indicator (REV)
Lights to indicate the Direction select switch is set to reverse (REV)
position.
F Does not light in NORMAL mode.
134 DVJ-X1
1 2 3 4
5 6 7 8
Jog dial display

31 32
30. Operation display 30 A
Displays play position, with one revolution equivalent to 135 frames. The display rotates
33
during playback, and stops during pause.
31. Cue point position display
Displays the position of cue points. 34
32. Audio/video memory status display
Flashes during writing to the audio/video memory; lights steadily when writing is completed.
While indicator is flashing, it may not be possible to record real time cue points or hot cue
points.
33. Jog touch detector indicator
When VINYL mode is set to ON, this indicator lights when the top panel of the jog dial is
touched.
34. VINYL mode indicator (Vinyl)
Lights when VINYL mode is set to ON.
B
Playing images from the DVJ-X1 on a television set
The example shown here is an illustration meant to depict the general display contents, and may differ somewhat from actual monitor
appearance.
This unit is equipped with both main video output (VIDEO OUT) and preview video output (PREVIEW OUT) connectors.
In NORMAL mode, both VIDEO OUT and PREVIEW OUT produce the same video signals.
In DJ mode, the outputs of the two connectors are different, as indicated below. Even in DJ mode, however, if a non-supported DJ
operation is attempted, the outputs will be the same as in NORMAL mode.
VIDEO OUT
This outputs only the DVD playback image; it should be connected to the main publicly viewed monitor.
PREVIEW OUT C
This outputs the images used by the DJ when operating the unit, and includes various additional guide messages and menus.
Main monitor image Preview monitor image
Guide
display area
A B C CUE
Angle Title number, Sub-screen for displaying points memorized in

indicator chapter number HOT CUE and CUE buttons
In reverse mode
displays “REV” Elapsed time within title
indicator
Play REV 1–010 40. 20

Chapter 3. 45. 67/ 4. 56 “Prohibited” mark and other E
indicators
Status indicator
Play: Normal playback Total time in chapter (min-
Loop: Loop playback utes / seconds)
Cue: Cue standby
Pause: Normal pause (standby) Chapter contents are displayed as minutes, seconds,
Scratch: Scratch operation and frames. When time mode is set to REMAIN, dis-
Search: Chapter/track search played numbers are preceded with a “minus” (–) sym-
1 : ¢ Forward search (scan) bol, for example, “-1.10.08”.
1 : 4 Reverse search (scan)
Reading: Recall hot cue, or cue point
DVJ-X1 135
5 6 7 8
1 2 3 4
A Discs Usable with This Unit

Types of discs playable on this unit The following discs cannot be played on this unit:
DVD video discs not marketed for region “1” or “All”
This unit is designed to support NTSC video format; discs or
DVD-RW discs recorded in VR format
their packaging should include messages indicating that they
DVD audio discs
are compatible with the NTSC format.
DVD-ROM
The following marks and logos are displayed on disc labels,
DVD-RAM
packaging, or jackets.
Video CDs
Types and Logos of playable discs CD-ROMs (MP3, etc.)
Photo CD
DVD video DTS-CD, etc.
B
Regarding copy-control CDs
This unit is designed to conform with audio CD standards. Op-
DVD-R (Note 1) DVD-RW (Note 2) eration is not guaranteed when playing CDs produced outside
the normal CD standards.
Notes:
CD CD-TEXT (Note 3) CD-R (Note 4) CD-RW (Note 4) Some DVD-R/DVD-RW and CD-R/CD-RW discs recorded on
standalone recorders or computer drives may not be playable
back on this player, due to a variety of reasons, including disc
characteristics, scratches, dirt, player lens dirt or condensa-
tion, etc.
Some discs recorded on computer drives may not be playable
C on this player, depending on the recording application used,
Note 1) About DVD-R disc playback: its settings, and operating environment. Be sure to use the
This player can play back DVD-R discs recorded in “DVD video” correct formatting for the discs used. For details, consult the
format. application author.
This unit cannot play DVD-R or DVD-RW discs recorded in
Note 2) About DVD-RW disc playback: video format unless they have been finalized.
This player can play back DVD-RW discs recorded in “DVD This unit cannot play DVD-RW discs recorded in VR format.
video” format. This unit cannot play partially recorded CD-R or CD-RW discs
When playing a disc that has been edited on a DVD recorder, that have not been finalized.
portions of the recording including links between tracks may For detailed information regarding the handling of DVD-R/DVD-
appear as a momentary still image. RW and CD-R/CD-RW discs, consult the handling precautions
When playing a disc that has been recorded or edited on a supplied with each disc.
DVD recorder, the locations of edited portions may shift some-
D what. Marks displayed on DVD
* For details, consult the Operating Instructions for your recorder.
The following symbols and marks may be displayed on DVD
Note 3) Regarding CD-TEXT display: labels or packaging:
The number of characters that can be displayed is up to 72 for
Mark Meaning
disc title, and 48 for track titles. When a display exceeds 8 char-
acters in length, the display will scroll. Only alpha-numerics and
2 Number of recorded audio tracks
a limited number of symbols can be displayed.
Note 4) CD-R/CD-RW discs: 2 Number of recorded subtitles

This player can play CD-R/CD-RW discs recorded in audio CD
format. 3 Number of recorded angles
E * For details, consult the Operating Instructions for your recorder.
16 : 9 LB Recorded aspect ratio
When playing 8cm CDs, always use an 8cm CD adapter
This unit cannot play 8cm DVDs. Region number. This player can play discs
1 ALL
marked with region “1” or “ALL”.
136 DVJ-X1
1 2 3 4

DVJX 1

Uploaded by

Copyright:

Available Formats

DVJX 1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DVJX 1

Uploaded by

Copyright:

Available Formats

ORDER NO.

DVJ-X1 KUC AC120V 1

For details, refer to "Important symbols for good services"

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

Downloaded from www.Manualslib.com manuals search engine

1. SAFETY PRECAUTIONS ANY MEASUREMENTS NOT WITHIN THE LIMITS

LEAKAGE CURRENT CHECK

[ Important symbols for good services ]

4. Shipping mode and shipping screws

5. Lubricants, glues, and replacement parts

Audio Cable Video Cable Forced Eject Pin

Control Cord Power Cord SD Memory Card

2. EXPLODED VIEWS AND PARTS LIST

16 Mirror mat Sheet VHL1012

2.2 EXTERIOR SECTION

6 Connector Assy PF04EE-D40

21 Eject Arm DNH2617 C

26 Flap Spring DBH1499

36 Lead Tape R4 DEB1529

51 Front Cover DEC2678

2.3 BOTTOM SECTION

> 6 SW POWER SUPPLY Assy DWR1378

11 Power Knob DNK4238 B

NSP 16 Chassis DNK4239

2.4 CONTROL PANEL SECTION

6 MFLB Assy DWG1576 56 Screw BPZ30P080FZK

11 9P Flexible Cable DDD1254

16 Eject Knob DAC2170

21 Slide VR Packin DED1172 C

26 Set Knob 2 DAC2162

46 Set Knob (SEARCH) DAC2157

2.5 JOG SECTION

6 JOG FL Filter (PC) DEC2608

16 JOG Holder 2 DNK4175

21 Gear Arm DNK4065 C

2.6 SLOT-IN MECHANISM SECTION

Mark No. Description Part No.

6 26P Flexible Cable DDD1257

16 Float Rubber D3 DEB1404

21 Float Fastener DBA1139

26 Loading Motor Assy-S DEA1008

31 Main Cam DNK3407

36 Clamper D4 Assy DXA1881

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM

B DVPL ASSY A MAIN ASSY

DMA CONTROLLER M65774BFPA

KSWB DIPB ASSY

3.2 BLOCK DIAGRAM (2/2)

CN101 J4502 CN4503

CN102 J4504 CN4505

G DIPB ASSY CN3001 CN3401

3.3 OVERALL WIRING DIAGRAM

JFLB ASSY JOGB ASSY

3.4 MAIN ASSY (1/10)

3.5 MAIN ASSY (2/10)

A A 2/10 MAIN ASSY (DWG1570)

A 1/10, 3/10-6/10, 8/10, 9/10

A 1/10, 3/10, 4/10

A 1/10, 3/10-6/10, 8/10, 9/10