Primeline Antenna, Ultra High Performance, High Cross Polar Discrimination, Dual Polarized, 8 FT
Primeline Antenna, Ultra High Performance, High Cross Polar Discrimination, Dual Polarized, 8 FT
Primeline Antenna, Ultra High Performance, High Cross Polar Discrimination, Dual Polarized, 8 FT
UXA8-107AC
FEATURES / BENEFITS
Extremly high XPD performance for complete isolation between the radions in each polarization Antenna
8 ft (2.4m) to 12 ft (3.7m) diameters can be ordered in split reflector configuration too. The split design provides
a reduced packaging volume which minimises shipping cost.
The expected degradation of the XPD for split design reflectors is less than 2 dB due to the special method of
reassembling the reflector on site.
Frequencies ranging from 4 GHz to 15 GHz with support for one ultra wideband frequency range (5.725-7.125
GHz) to reduce antenna requirements and simplify logistic
Technical Features
GENERAL SPECIFICATIONS
Product Type Point to point antennas
Profile PrimeLine
Performance Ultra High, High Cross Polar Discrimination
Polarization Dual
Antenna Input CPR90G
Reflector 1-part
Radome flexible
Antenna color White RAL 9010
Swaybar 1: (3.0 m x Ø60 mm)
ELECTRICAL SPECIFICATIONS
Frequency GHz 10.7 - 11.7
3dB beamwidth degrees 0.8
Low Band Gain dBi 45.9
Mid Band Gain dBi 46.2
High Band Gain dBi 46.7
F/B Ratio dB 75.0
XPD dB 40.0
IPI dB 45.0
Max VSWR / R L VSWR / dB 1.06 ( 30.7 )
ETSI EN 302217 Range 1, class 3
Regulatory Compliance
FCC Category A
MECHANICAL SPECIFICATIONS
Diameter ft (m) 8 (2.4)
Elevation Adjustment degrees ±5
Azimuth Adjustment degrees ±5
Polarization Adjustment degrees ±5
Mounting Pipe Diameter minimum mm (in) 114 (4.5)
Mounting Pipe Diameter maximum mm (in) 114 (4.5)
Approximate Weight kg (lb) 180 (396)
Survival Windspeed km/h (mph) 200 (125)
Operational Windspeed km/h (mph) 190 (118)
STRUCTURE
Radome Material PVC coated fabric
All information contained in the present datasheet is subject to confirmation at time of ordering Page 1 of 2
PRODUCT DATASHEET
UXA8-107AC
Mount Outline
Dimension A mm (in) 2616 (103.4)
Dimension B mm (in) 1450 (57.1)
Dimension C mm (in) 460 (18.1)
Dimension D for 114mm (4.5in) Pipe mm (in) 190 (7.5)
Dimension E mm (in) 310 (12.3)
Dimension F mm (in) 1120 (44.1)
Wind Load
FST Side force max. @ survival wind speed N (lb) 6350 (1422)
FAT Axial force max. @ survival wind speed N (lb) 12380 (2773)
MT Torque maximum @ survival wind speed Nm (lb ft) 5960 (4400)
All information contained in the present datasheet is subject to confirmation at time of ordering Page 2 of 2