Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

1-5/8" CELLFLEX Premium Attenuation Low-Loss Foam-Dielectric Coaxial Cable

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

PRODUCT DATASHEET

LCF158-50JFNA
1-5/8" CELLFLEX® Premium Attenuation Low-Loss Foam-Dielectric Coaxial Cable

CELLFLEX®1-5/8" premium attenuation low loss flexible cable; flame retardant / hologen free
jacket, radiation resistant jacket
FEATURES / BENEFITS
• Ultra Low Attenuation
The further reduced attenuation of CELLFLEX® premium attenuation coaxial cable results in
extremly efficient signal transfer in your RF system, especially at high frequencies.
• Complete Shielding
The solid outer conductor of CELLFLEX® coaxial cable creates a continuous RFI/EMI shield that
minimizes system interference.
• Low VSWR
Special low VSWR versions of CELLFLEX® coaxial cables contribute to low system noise. 1-5/8" CELLFLEX® Low-Loss Foam Dielectric
• Outstanding Intermodulation Performance Coaxial Cable
CELLFLEX® coaxial cable's solid inner and outer conductors virtually eliminate intermods.
Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS
factory.
• High Power Rating
Due to their low attenuation, outstanding heat transfer properties and temperature stabilized
dielectric materials, CELLFLEX® cable provides safe long term operating life at high transmit
power levels.
• Wide Range of Application
Typical areas of application are: feedlines for broadcast and terrestrial microwave antennas,
wireless cellular, PCS and ESMR base stations, cabling of antenna arrays, and radio equipment
interconnects.
• Meets or Exceeds: IEC 60754-1, -2; IEC 60332-1-1, -2;IEC 61034-1, -2; IEC 60332-3-24
(formerly IEC 60332-3-C)

Technical features
APPLICATIONS
Wireless
Applications Indoor TV & Radio HF Defense Mobile Radio Cable Solutions
Communication
STRUCTURE
Size 1-5/8
Jacket Option Black, Radiation resistant
Inner Conductor mm (in) 17.6 (0.69)
Dielectric mm (in) 42.4 (1.67)
Outer Conductor mm (in) 46.4 (1.83)
Jacket mm (in) 50.2 (1.98)
Cable Type Foam-Dielectric, Corrugated
TESTING AND ENVIRONMENTAL
Fire Performance Flame Retardant, LS0H
Meets/Exceeds: IEC 60754-1, -2; IEC 60332-1-1, -2;
IEC 61034-1, -2; IEC 60332-3-24 (formerly IEC 60332-3-C);
Flame Retardant Jacket
UL 1581; UL 1666; NFPA130 (ed. 2014) Ch.12 (NFPA70 ) via UL-1685/FT4/IEEE1202; NEC type
Specifications
CATVR;
CPR: https://products.rfsworld.com/userfiles/cpr/rfs-products-cpr-compliance.pdf
Installation Temperature °C(°F) -25 to 60 (-13 to 140)
Storage Temperature °C(°F) -70 to 85 (-94 to 185)
Operation Temperature °C(°F) -50 to 85 (-58 to 185)

LCF158-50JFNA REV : M REV DATE : 17 Nov 2020 www.rfsworld.com

All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at Page 1 of 4
time of ordering
PRODUCT DATASHEET
LCF158-50JFNA
1-5/8" CELLFLEX® Premium Attenuation Low-Loss Foam-Dielectric Coaxial Cable

ELECTRICAL SPECIFICATIONS
Impedance, Ohm Ω 50 +/- 1
Maximum Frequency GHz 2.75
Velocity, percent % 90
Capacitance pF/m (pF/ft) 74 (22.5)
Inductance, uH/m (uH/ft) µH/m (µH/ft) 0.185 (0.056)
Peak Power Rating kW 310
RF Peak Voltage Volts 5600
Jacket Spark Volt RMS 10000
Inner Conductor dc Resistance, Ω/1000 m
1.3 (0.4)
Ω/km (Ω/kft) (Ω/1000 ft)
Outer Conductor dc Resistance, Ω/1000 m
0.47 (0.14)
ohm/1000 m (Ohm/1000 ft) (Ω/1000 ft)
Return Loss (VSWR) Performance Standard for 40-2700 MHz, Premium according to B-Class
Min. Return Loss (Max. VSWR) dB (VSWR) Standard 20 (1.222), Premium 24 (1.135)/ 23 (1,152)
Phase Stabilized Phase stabilized and phase matched cables and assemblies are available upon request.
Temperature & Power Standard
MECHANICAL SPECIFICATIONS
Cable Weight, Nominal kg/m (lb/ft) 1.25 (0.84)
Minimum Bending Radius, Single
mm (in) 200 (8)
Bend
Minimum Bending Radius,
mm (in) 500 (20)
Repeated Bends
Bending Moment, Nm (lb-ft) Nm (lb*ft) 42 (31)
Tensile Strength N (lb) 2500 (562)
Recommended / Maximum
m (ft) 1.2 / 1.5 (4 / 5)
Clamp Spacing

LCF158-50JFNA REV : M REV DATE : 17 Nov 2020 www.rfsworld.com

All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at Page 2 of 4
time of ordering
PRODUCT DATASHEET
LCF158-50JFNA
1-5/8" CELLFLEX® Premium Attenuation Low-Loss Foam-Dielectric Coaxial Cable

ATTENUATION AND POWER RATING


Frequency, MHz dB per 100m dB per 100ft Power, kW
0.5 0.04 0.01 258
1 0.06 0.02 182
1.5 0.08 0.02 148
2 0.09 0.03 128
10 0.20 0.06 56.90
20 0.28 0.09 39.90
30 0.35 0.11 32.50
50 0.45 0.14 25
88 0.60 0.18 18.60
100 0.64 0.20 17.40
108 0.67 0.21 16.70
150 0.80 0.24 14
174 0.86 0.26 13
200 0.93 0.28 12.10
300 1.16 0.35 9.66
400 1.35 0.41 8.30
450 1.44 0.44 7.78
500 1.53 0.47 7.33
512 1.55 0.47 7.23
600 1.69 0.52 6.63
700 1.84 0.56 6.09
750 1.91 0.58 5.87
800 1.98 0.60 5.66
824 2.02 0.62 5.55
894 2.11 0.64 5.31
900 2.12 0.65 5.29
925 2.15 0.66 5.21
960 2.20 0.67 5.10
1000 2.25 0.69 4.98
1250 2.56 0.78 4.38
1400 2.73 0.83 4.11
1500 2.84 0.87 3.95
1700 3.06 0.93 3.66
1800 3.16 0.96 3.55
2000 3.36 1.03 3.34
2100 3.46 1.06 3.24
2200 3.56 1.08 3.15
2400 3.75 1.14 2.99
2500 3.84 1.17 2.92
2600 3.93 1.20 2.85

LCF158-50JFNA REV : M REV DATE : 17 Nov 2020 www.rfsworld.com

All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at Page 3 of 4
time of ordering
PRODUCT DATASHEET
LCF158-50JFNA
1-5/8" CELLFLEX® Premium Attenuation Low-Loss Foam-Dielectric Coaxial Cable

2700 4.02 1.23 2.79


2750 4.07 1.24 2.75

External Document Links Notes

LCF158-50JFNA REV : M REV DATE : 17 Nov 2020 www.rfsworld.com

All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at Page 4 of 4
time of ordering

You might also like