TCOM-600

TIMES MICROWAVE SYSTEMS

TCOM -600 ®

Low Loss Low Passive Intermod Coax

Ideal for…
• -155 dBc Intermodulation Distortion
• Low Loss UHF/Microwave Interconnect
• Wireless Base Station Interconnect
• Flexible for Easy Routing

• TCOM standard is a UV Resistant Polyethylene jack-

®
Weatherability: TCOM-600 cables designed for out-
eted cable designed for 20-year service outdoor use. The door exposure incorporate the best materials for UV re-
bending and handling characteristics are significantly bet- sistance and have life expectancy in excess of 20 years.
ter than air-dielectric and corrugated hard-line cables. Connectors: A wide variety of connectors are available
TCOM - FR is a non-halogen (non-toxic), low smoke,
®
for TCOM-600 cable, including all common interface
fire retardant cable designed for in-building runs that can types, reverse polarity, and a choice of solder or non-
be routed anywhere except air handling plenums. TCOM- solder center pins. Most LMR connectors employ
FR has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’ crimp outer attachment using standard hex crimp
respectively. sizes.
TCOM - PUR has a polyurethane outer jacket designed
®
Cable Assemblies: All TCOM-600 cable types are
for multiple bending/flexing cycles in rugged tactical ap- available as pre-terminated cable assemblies. Refer to
plications. the section on FlexTech for further details.
Flexibility and bendability are hallmarks of the TCOM-
Part Description Stock
600 cable design. The flexible outer conductor enables
Part Number Application Jacket Color Code
the tightest bend radius available for any cable of similar TCOM-600 Outdoor PE Black 55005
size and performance. TCOM-600-FR Indoor-Riser CMR FRPE Black 55018
Low Loss is another hallmark feature of TCOM-600. TCOM-600-PUR Indoor/Outdoor PUR Black 55006
Size for size LMR has the lowest loss of any flexible cable TCOM-600-PUR-DB Outdoor/
Watertight
PUR Black 55041

and comparable loss to semirigid hard-line cables.

Passive Intermod is lower than –155 dBc exceed the Construction Specifications
Description
Material In. (mm)
performance levels for most wireless applications.
Inner Conductor Solid BCCAI 0.176 (4.47)
RF Shielding is 60 dB greater than typical single shielded
Dielectric Foam PE 0.455 (11.56)
coax (40 dB). The multi-ply bonded foil outer conductor Outer Conductor SPC Strip Braid 0.465 (11.81)
is rated conservatively at > 100 dB (i.e. >200 dB be- Overall Braid TC Braid over Al tape 0.500 (12.70)
tween two adjacent cables). Jacket (see table above) 0.590 (14.99)

132 (800) TMS-COAX • www.timesmicrowave.com

 TCOM-600
TIMES MICROWAVE SYSTEMS

Mechanical Specifications Electrical Specifications

Performance Property Units US (metric) Performance Property Units US (metric)
Bend Radius: installation in. (mm) 1.50 (38.1) Velocity of Propagation % 87
Bend Radius: repeated in. (mm) 6.0 (152.4) Dielectric Constant NA 1.32
Bending Moment ft-lb (N-m) 2.75 (3.73) Time Delay nS/ft (nS/m) 1.17 (3.83)
Impedance ohms 50
Weight lb/ft (kg/m) 0.160 (0.24)
Capacitance pF/ft (pF/m) 23.4 (76.6)
Tensile Strength lb (kg) 350 (158.9)
Inductance uH/ft (uH/m) 0.058 (0.19)
Flat Plate Crush lb/in. (kg/mm) 60 (1.07)
Shielding Effectiveness dB >100
DC Resistance
Inner Conductor ohms/1000ft (/km) 0.53 (1.74)
Outer Conductor ohms/1000ft (/km) 1.52 (5.0)
Environmental Specifications Voltage Withstand Volts DC 4000
Performance Property 0
F C o
Jacket Spark Volts RMS 8000
Installation Temperature Range -40/+185 -40/+85 Peak Power kW 40
Storage Temperature Range -94/+185 -70/+85 Passive Intermod dBc -155
Operating Temperature Range -40/+185 -40/+85

Attenuation vs. Frequency (typical)

10.0
(db per 100 feet)
Attenuation

1.0

0.1
10 100 1,000 10,000
Frequency (MHz)

Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 10,00
Attenuation dB/100 ft 0.4 0.6 1.0 1.2 1.8 2.6 3.5 3.9 4.1 4.6 7.6 10.6
Attenuation dB/100 m 1.5 1.9 3.3 4.1 6.0 8.6 11.4 12.7 13.4 15.2 24.9 34.7
Avg. Power kW 5.20 4.01 2.28 1.86 1.28 0.88 0.66 0.60 0.56 0.50 0.30 0.22

Calculate Attenuation =
(0.080075) • FMHz + (0.000256) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation:
VSWR=1.0 ; Ambient = +25°C (77°F)
Power:
VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading

(800) TMS-COAX • www.timesmicrowave.com 133

TCOM-600
TIMES MICROWAVE SYSTEMS

TCOM-600
Low Loss Low Passive Intermod Coax
1 2 3 4 TC-600-716M-RA
3190-395

TC-600-716FC EZ-600-716-MH TC-600-716MC

3190-375 3190-503 3190-502

5 6 7
8

EZ-600-NF-BH TC-600-NF-BH EZ-600-NMH-X

3190-589 TC-600-NFC-BH
3190-616 3190-466 3190-2627

9 10 TC-600-NMC-RA 12
11
3190-233

EZ-600-NMC-2-D TC-600-NMC EZ-600-TM

3190-2641 3190-357 3190-418

13 14 15 16

TC-600-TM-X
EZ-600-TM-X EZ-600-UM TC-600-UMC
3190-2530
3190-2531 3190-615 3190-213

Connectors


Part
Inner Outer Finish*
Stock VSWR ** Coupling Contact Contact Body Length Width Weight
Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g)
1. 7-16 DIN Female Straight Jack TC-600-716-FC 3190-375 <1.25:1 (2.5) NA Solder Clamp S/S 1.1 (28) 1.00 (25.4) 0.249 (112.9)
2. 7-16 DIN Male Straight Plug EZ-600-716-MH 3190-503 <1.25:1 (2.5) Hex Spring Finger Crimp S/S 2.0 (51) 1.30 (33.0) 0.254 (115.2)
3. 7-16 DIN Male Straight Plug TC-600-716-MC 3190-502 <1.25:1 (2.5) Hex Solder Clamp S/S 2.0 (51) 1.30 (33.0) 0.347 (157.4)
4. 7-16 DIN Male Right Angle TC-600-716M-RA 3190-395 <1.35:1 (2.5) Hex Solder Crimp S/S 1.4 (36) 1.40 (35.6) 0.354 (160.8)
5. N Female Bulkhead Jack EZ-600-NF-BH 3190-616 <1.25:1 (2.5) NA Spring Finger Crimp S/G 2.4 (61) 0.88 (22.4) 0.195 (88.5)
6. N Female Bulkhead Jack TC-600-NF-BH 3190-589 <1.25:1 (2.5) NA Solder Crimp S/G 2.4 (61) 0.88 (22.4) 0.195 (88.5)
7. N Female Bulkhead Jack TC-600-NFC-BH 3190-466 <1.25:1 (2.5) NA Solder Clamp S/G 2.2 (56) 0.94 (23.9) 0.214 (97.1)
8. N Male Straight Plug EZ-600-NMH-X 3190-2627 <1.25:1 (8.0) Hex/Knurl Spring Finger Crimp A/G 2.1 (53) 0.92 (23.4) 0.164 (74.4)
9. N Male Straight Plug EZ-600-NMC-2-D 3190-2641 <1.25:1 (6) Hex/Knurl Spring Finger Clamp A/G 2.1 (53) 0.92 (23.4) 0.202 (91.6)
10. N Male Straight Plug TC-600-NMC 3190-357 <1.25:1 (2.5) Hex Solder Clamp S/G 2.1 (53) 0.92 (23.4) 0.208 (93.4)
11. N Male Right Angle TC-600-NMC-RA 3190-233 <1.35:1 (2.5) Hex Solder Clamp S/G 2.1 (53) 0.92 (23.4) 0.280 (17.9)
12. TNC Male Straight Plug EZ-600-TM 3190-418 <1.25:1 (2.5) Knurl Spring Finger Crimp S/G 1.7 (43) 0.59 (15.0) 0.112 (50.8)
13. TNC Male Straight Plug TC-600-TM-X 3190-2530 <1.25:1 (6) Hex/Knurl Solder Crimp A/G 2.3 (57.6) 0.75 (19.0) 0.100 (45.6)
14. TNC Male Straight Plug EZ-600-TM-X 3190-2531 <1.25:1 (6) Hex/Knurl Spring Finger Crimp A/G 2.3 (57.6 0.75 (19.0) 0.100 (45.6)
15. UHF Male Straight Plug EZ-600-UM 3190-615 <1.25:1 (2.5) Knurl Spring Finger Crimp S/G 1.7 (43) 0.88 (22.4) 0.164 (74.4)
16. UHF Male Straight Plug TC-600-UMC 3190-213 <1.25:1 (2.5) Knurl Solder Clamp S/G 1.7 (43) 0.88 (22.4) 0.198 (89.8)
* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair

134 (800) TMS-COAX • www.timesmicrowave.com

 TCOM-600
TIMES MICROWAVE SYSTEMS

GK-S600TT

CS-A600T, CS-60120T, CS-

HG-600T 60170T

SC-600T CB-600T Hanger Block Hardware

Accessories
Part Stock
Type Number Code Description
Ground Kit GK-S600TT GK-S600TT Standard Grounding Kit (each)
Hoisting Grip HG-600T HG-600T Split/Laced Type (each)
Cold Shrink CS-A600T CS-A600T Cable to Antenna Junction (each)
Cold Shrink CS-60120T CS-60120T LMR-600 to -1200 Junction (each)
Cold Shrink CS-60170T CS-60170T LMR-600 to -1700 Junction (each)
Standard Entry
Port Cushion SC-600T-3 SC-600T-3 Three Cables (each)
Standard Entry Panels Full Range of Port Styles/Combinations Available
Hanger Blocks CB-600T CB-600T Dual Cable Support Block (kit of 10)
Hanger Block Supporting Hardware Complete Range of Supporting Hardware & Adapters Available

WR600
3190-1435
DBT-U
HX-4 Y1720 3192-001
3192-200 3190-203

CCT-01 CST-600 RB-CST TK-600-EZ

3190-1544 3192-052 3192-086 3190-1602

Install Tools
Part Stock
Type Number Code Description
Crimp Tool HX-4 3190-200 Crimp Handle
Crimp Dies Y1720 3190-203 Standard .610" Hex
Cutting Tool CCT-01 3190-1544 Cable and flush cut tool
Deburr Tool DBT-U 3192-001 Removes center conductor rough edges
Replacement Blade Kit RB-CST 3192-086 Replacement blade kit for all CST strip tools
Wrench WR600 3190-1435 15/16" Box Wrench (2 required for EZ-600-NMC-2)
Strip Tool CST-600 3192-052 Combination prep tool for T-COM 600 crimp/clamp connectors
Tool Kit TK-600EZ 3190-1602 Tool kit for LMR crimp/clamp connectors
(includes CCT-01, CST-600, HX-4, Y1720, Tool Pouch)

(800) TMS-COAX • www.timesmicrowave.com 135