Pelco - Spectra IV IP H264 Series Network Dome System Specification Sheet
Pelco - Spectra IV IP H264 Series Network Dome System Specification Sheet
Pelco - Spectra IV IP H264 Series Network Dome System Specification Sheet
Product Features
• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks
• Simultaneous IP and Analog Video and Control
• H.264, MPEG-4, and MJPEG Compression
• Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,
DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QoS, HTTP, HTTPS, LDAP
(client), SSH, SSL, SMTP, FTP, and 802.1x (EAP)
• Multilevel Password Protection
• 3 Autofocus, High Resolution Integrated Camera/Optics Packages
• Autotracking
• Horizontal Zone and Window Blanking
• Sensitivity Down to 0.0015 Lux PAL (36X Models)
• On-Screen Compass and Tilt Display
• Up to 2 Simultaneous Video Streams
• Web Viewing • ONVIF v1.02 Conformant
• Open IP Standards • Bidirectional Full-Duplex Audio
Spectra® IV IP dome systems incorporate all of the features and All cameras in Spectra IV IP dome drives feature an EXview HAD™
functions of Spectra IV (including analog), while allowing you to imager for increased sensitivity and LowLight™ technology allowing
control and monitor video over an IP network from virtually anywhere the cameras to compensate for scenes where minimal light is present.
in the world. Spectra IV IP is a high-speed dome with a built-in Both the 29X and the 36X cameras feature built-in motion detection
100Base-TX network interface for live streaming to any network and advanced 128X wide dynamic range (WDR) that enables the
application. system to compensate for scenes where dramatic contrasts in lighting
are present. The 36X day/night camera’s electronic image stabilization
Spectra IV IP supports two simultaneous video streams. The two digitally reduces blurring of the camera image due to vibration caused
streams can be compressed in MJPEG, MPEG-4, and H.264 formats by external sources, such as wind and traffic.
across several resolution configurations. The streams can be
configured in a variety of frame rates, bit rates, and group of pictures Web Interface
(GOP) structures for additional bandwidth administration. The H.264 Spectra IV IP uses a standard Web browser for powerful remote
compression video files are up to 20 times smaller than MJPEG, setup and administration.
making network video storage more affordable.
Network protocols such as Secure Sockets Layer (SSL) configuration
Spectra IV IP allows you to view and control analog video while for security certificates, Secure Shell (SSH) for remote logon, and
viewing, recording, and controlling network IP video. There is no need Quality of Service (QoS) for priority or guarantee data flow can be
to abandon your current analog infrastructure if you are making the managed using a Web browser.
move to network video as a recording solution. Continue to monitor
and control video in the analog domain while recording video in the Video Systemization
network domain, and let Spectra IV IP’s professional compression Spectra IV IP easily connects to Pelco IP and hybrid systems such as
method do the work for you without the need for external encoders. Endura® version 1.5 (or later), MPEG-4; Endura version 2.0 (or later),
H.264; Digital Sentry® version 7.3 (or later); DX8100 version 2.0 (or
Spectra IV IP dome system consists of a back box, a dome drive, and
later); DX4700/DX4800 Series 1.1 (or later); DX4700HD/DX4800HD
a lower dome. These three system components are interchangeable
Series v2.0 (or later); and DVR5100 version 1.5.4 (or later). The camera
with other Spectra IV IP dome systems, making retrofitting and
also features open architecture connectivity to third-party software.
application adjustments simple.
Pelco offers an application programming interface (API) and software
Spectra IV IP features several back box options. All back boxes feature developer’s kit (SDK) for interfacing with Pelco’s IP cameras.
built-in memory, which can be used to store camera and location-
specific dome settings, including labels, presets, patterns, and zones.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
CAMERA/OPTICS
Day/Night (36X) Day/Night (29X) Day/Night (23X)
Signal Format NTSC (DD436) NTSC (DD429) NTSC (DD423)
PAL (DD436-X) PAL (DD429-X) PAL (DD423-X)
Scanning System Interlace/Progressive selectable Interlace/Progressive selectable 2:1 Interlace
Image Sensor 1/4-inch EXview HAD™ 1/4-inch EXview HAD 1/4-inch EXview HAD
Effective Pixels
NTSC 768 (H) X 494 (V) 768 (H) X 494 (V) 768 (H) X 494 (V)
PAL 752 (H) X 582 (V) 752 (H) X 582 (V) 752 (H) X 582 (V)
Horizontal Resolution
NTSC >540 TV Lines >540 TV Lines 540 TV Lines
PAL >540 TV Lines >540 TV Lines 540 TV Lines
Lens f/1.4 (focal length, 3.3 ~ 119 mm) f/1.4 (focal length, 3.3 ~ 95.7 mm) f/1.6 (focal length, 3.6 ~ 82.8 mm)
Zoom 36X optical, 12X digital 29X optical, 12X digital 23X optical, 12X digital
Zoom Speed (optical range) 3.2/4.6/6.6 seconds 3.2/4.6/6.6 seconds 2.9/4.2/5.8 seconds
Horizontal 57.2° at 3.3 mm wide zoom; 57.2° at 3.4 mm wide zoom; 54° at 3.6 mm wide zoom;
Angle of view 1.7° at 119 mm telephoto zoom 2.2° at 95.7 mm telephoto zoom 2.5° at 82.8 mm telephoto zoom
Focus Automatic with manual override Automatic with manual override Automatic with manual override
Maximum Sensitivity 90% scene reflectance; f/1.4; 27 dB gain; 90% scene reflectance; f/1.4; 27 dB gain; 35 IRE
35 IRE (245 mV equivalent) 35 IRE (245 mV equivalent)
NTSC/EIA 0.55 lux at 1/60 sec (color) 0.55 lux at 1/60 sec (color) 0.65 lux at 1/60 sec (color)
0.018 lux at 1/2 sec (color) 0.018 lux at 1/2 sec (color) 0.15 lux at 1/60 sec (B-W)
0.055 lux at 1/60 sec (B-W) 0.055 lux at 1/60 sec (B-W)
0.0018 lux at 1/2 sec (B-W) 0.0018 lux at 1/2 sec (B-W)
PAL/CCIR 0.45 lux at 1/50 sec (color) 0.45 lux at 1/50 sec (color) 0.55 lux at 1/50 sec (color)
0.015 lux at 1/1.5 sec (color) 0.015 lux at 1/1.5 sec (color) 0.12 lux at 1/50 sec (B-W)
0.045 lux at 1/50 sec (B-W) 0.045 lux at 1/50 sec (B-W)
0.0015 lux at 1/1.5 sec (B-W) 0.0015 lux at 1/1.5 sec (B-W)
Sync System Internal/AC line lock, phase adjustable Internal/AC line lock, phase adjustable Internal/AC line lock, phase adjustable
using remote control, V-Sync using remote control, V-Sync using remote control, V-Sync
White Balance Automatic with manual override Automatic with manual override Automatic with manual override
Shutter Speed Automatic (electronic iris)/Manual Automatic (electronic iris)/Manual Automatic (electronic iris)/Manual
NTSC 1/2 ~ 1/30,000 1/2 ~ 1/30,000 1/2 ~ 1/30,000
PAL 1/1.5 ~ 1/30,000 1/1.5 ~ 1/30,000 1/1.5 ~ 1/30,000
Iris Control Automatic iris control with manual Automatic iris control with manual Automatic iris control with manual
override override override
Gain Control Automatic/OFF Automatic/OFF Automatic/OFF
Video Output 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms
Video Signal-to-Noise >50 dB >50 dB >50 dB
Wide Dynamic Range 128X 128X —
Electronic Image Stabilization Integrated/Selectable — —
Auto Sharpness Integrated/Selectable Integrated/Selectable —
Video Motion Detection Integrated Integrated —
TECHNICAL SPECIFICATIONS
VIDEO
Video Encoding H.264 base profile, MPEG-4, and MJPEG
Video Streams Up to 2 simultaneous streams; the second
stream is variable based on the setup of the
primary stream
Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5,
4, 3, 2, 1 (dependent upon coding, resolution,
and stream configuration)
*Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments.
†
This product is not compatible with QuickTime version 7.6.4 for Windows XP
or Windows Vista. If you have this version installed on your PC, you will
need to upgrade to QuickTime version 7.6.5.
TECHNICAL SPECIFICATIONS
• Variable Scan Speed: Scan Speed Can Be Configurable Between • Freeze Frame During Presets
1 to 40°/sec
• Pan Motion Allows 0.1° to 150°/sec Pan Speed
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
• Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D,
Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional
Translator Card
• Digital Position and Zoom Control and Feedback Through Pelco D Protocol
• Built-in Menu System for Setup of Configurable Functions
• “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
• Configurable Zoom Speeds
• Freeze Frame During Presets
TECHNICAL SPECIFICATIONS
19.0 (7.5)
In-Ceiling (Indoor)
• Built-in Memory Stores Camera/Dome Settings
13.2 • Single Back Box for Suspended or Hard Ceiling Applications
(5.2)
• Requires 13.35 cm (5.25 in.) Space Above Ceiling and 8.25 cm (3.25 in.) Below
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
8.8 • Quick Disconnect to Dome Drive
(3.5)
• Aluminum Construction
15.0 (5.9) • Suitable for Use in Environmental Air Handling Spaces
20.8 (8.2)
25.2 (9.9)
Environmental In-Ceiling
• Built-in Memory Stores Camera/Dome Settings
11.0 • Single Back Box for Hard Ceiling Applications
(4.4)
• Requires 11.18 cm (4.40 in.) Space Above Ceiling and 10.92 cm (4.30 in.) Below
• Includes Heater and Fan
10.9 • Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
(4.3)
• Quick Disconnect to Dome Drive
15.0 (5.9) • Aluminum Construction
21.8 (8.6)
TECHNICAL SPECIFICATIONS
Heavy-Duty Pendant
DUAL WALL Available only with 29X and 36X models
CONSTRUCTION
• Standard and Environmental Models
25.65
(10.1)
• Built-in Memory Stores Camera/Dome Settings
19.05
(7.5) • Quick Disconnect to Dome Drive
• Dual Wall Construction
• Heavy-Duty Polycarbonate Dome Bubble
• Aluminum Trim Ring with Barrel-Type Key Locks
24.64 Ø15.57
(Ø 6.13)
• Optional Protective Cage
(9.70)
• Environmental Model Includes Sun Shield, Fan, and Heater
21.64
(8.52)
14.99
(5.90)
TECHNICAL SPECIFICATIONS
GENERAL Heavy-Duty
Environmental Pendant (Assumes no wind chill factor)
Construction
Maximum 60°C (140°F) absolute maximum;
Back Box
50°C (122°F) sustained maximum
In-Ceiling Aluminum
Minimum –51°C (–60°F) absolute minimum; minimal
Pendant Aluminum
icing at sustained minimum of –45°C (–50°F);
Heavy-Duty Aluminum
prevents icing at sustained minimum of
Stainless Steel 316 stainless steel; gray, polyurethane
–40°C (–40°F); de-ices 2.5 mm (0.1 inch)
powder coated finish
within 3 hours after power-up
Dome Drive Aluminum, thermo plastic
Stainless Steel (Assumes no wind chill factor)
Lower Dome
In-Ceiling Acrylic Maximum 60°C (140°F) absolute maximum;
Pendant Acrylic 50°C (122°F) sustained maximum
Heavy-Duty Polycarbonate, 0.09-inch thick Minimum –51°C (–60°F) absolute minimum; minimal
Stainless Steel Acrylic icing at sustained minimum of –45°C (–50°F);
Light Attenuation prevents icing at sustained minimum of
Smoked f/0.5 light loss –40°C (–40°F); de-ices 2.5 mm (0.1 inch)
Clear Zero light loss within 3 hours after power-up
Chrome f/2.0 light loss Effective Projected Area (EPA) 132.257 sq cm (20.5 sq in.) without mount;
Gold f/2.0 light loss 303.225 sq cm (47 sq in.) with IWM Series
Cable Entry (back box) mount
In-Ceiling 0.75-inch conduit fitting
Pendant Through 1.5-inch NPT pendant mount MECHANICAL
Weight (approximate) Unit Shipping (Dome Drive Only)
In-Ceiling 2.4 kg (5.2 lb) 3.6 kg (7.9 lb)
Environmental In-Ceiling 2.8 kg (6.2 lb) 4.5 kg (9.9 lb) Pan Movement 360° continuous pan rotation
Standard Pendant 3.0 kg (6.5 lb) 5.0 kg (11.0 lb) Vertical Tilt Unobstructed +2° to –92°
Environmental Pendant 3.5 kg (7.6 lb) 5.4 kg (11.9 lb) Manual Pan/Tilt Speeds
Heavy-Duty In-Ceiling* 3.3 kg (7.3 lb) 5.4 kg (11.9 lb) Pan 0.1° to 80°/sec manual operation, 150°/
Heavy-Duty Pendant* 4.5 kg (9.8 lb) 7.3 kg (16.1 lb) sec Turbo
Heavy-Duty Environmental
Pendant* 4.5 kg (9.8 lb) 7.3 kg (16.1 lb) Tilt 0.1° to 40°/sec manual operation
Stainless Steel 4.6 kg (10.1 lb) 7.3 kg (16.1 lb) Preset Speeds
Environment Pan 400°/sec
In-Ceiling Indoor Tilt 200°/sec
Environmental In-Ceiling Outdoor For variable-speed operation, an appropriate
Pendant, Standard and controller is required; (with nonvariable speed
Environmental Indoor/outdoor control, Spectra IV IP pan/tilt speed is
Heavy-Duty In-Ceiling Indoor 20°/sec)
Heavy-Duty Pendant,
Standard & Environmental Indoor/outdoor
Stainless Steel Indoor/outdoor
AUDIO
Operating Temperature Streaming Bidirectional: full or half duplex
In-Ceiling 0° to 50°C (32° to 122°F) Input/Output Terminal block, analog for microphone and
Standard Pendant (Assumes no wind chill factor) speaker; 600-ohm differential; 1 Vp-p
Maximum 45°C (113°F) absolute maximum; 35°C (95°F) maximum signal level
sustained maximum Compression G.711 PCM 8 bit, 8 kHz mono at 64 kbit/sec
Minimum –4°C (25°F) sustained minimum
Environmental In-Ceiling
and Environmental Pendant (Assumes no wind chill ELECTRICAL
factor) Ports RJ-45 connector for 100Base-TX
Maximum 60°C (140°F) absolute maximum; Auto MDI/MDI-X
50°C (122°F) sustained maximum Autonegotiate/Manual setting
Minimum –51°C (–60°F) absolute minimum; prevents Cabling Type Cat5 or better for 100Base-TX
icing at sustained minimum of –45°C (–50°F);
Input Voltage 18 to 32 VAC; 24 VAC nominal
de-ices 2.5 mm (0.1 inch) within 3 hours after
22 to 27 VDC; 24 VDC nominal
power-up
Heavy-Duty In-Ceiling 0° to 50°C (32° to 122°F) Input Power
Heavy-Duty Pendant 0° to 50°C (32° to 122°F) absolute maximum; 24 VAC 23 VA nominal (without heater);
0° to 50°C (32° to 122°F) sustained maximum 73 VA nominal (with heater)
24 VDC 0.7 A nominal (without heater);
3 A nominal (with heater)
Fuse 1.25 A
Auxiliary Outputs 2
Alarm Inputs 7
*Add 0.90 kg (2 lb) to the total weight if the system includes a lower dome cage.
RELATED PRODUCTS
Pelco by Schneider Electric Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
3500 Pelco Way, Clovis, California 93612-5699 United States to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
services are the property of their respective companies.
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 Product specifications and availability are subject to change without notice.
www.pelco.com www.pelco.com/community ©Copyright 2014, Pelco, Inc. All rights reserved.