Rolls-Royce Corporation

M250-C20

COMMERCIAL SERVICE
LETTER
(CSL)

Technical Publications
Index

March 3, 2020
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1001 M250 Authorized Maintenance Centers (AMCs), Reissue 11 06--11--18

Publications, Rolls-Royce Telephone Contacts, Warranty, 03--31--97
Training, and Unapproved Parts

1002 Approved Lubricants--Engine Oil System Cancelled--Ref:

Ops. And Maint.
Manual

1003 Fuels Approved for use in The 250--C20 Series Engines Cancelled--Ref:
Ops. And Maint.
Manual

1004 Time Between Overhauls Cancelled--Ref:

Ops And Maint.
Manual

1005 250--C20 Series Engine Time Limited Parts Cancelled--Ref:

Ops. And Maint.
Manual

1006 Compressor Installation 250--C20 Engine Cancelled--Ref:

Ops. And Maint.
Manual

A--1007 Dual Element Fuel Pump Drive Shaft Inspection 11--16--72 4 09--01--94

1008 O--Ring Added Between Oil Filter Element And Standpipe Cancelled--Ref:
Illus. Parts
Catalog

1009 Early Lightoff or Afterfire 01--20--72

1010 Field Inspection Instructions For Determination Of Proper Cancelled

Sealing Of The Throttle Shaft

1011 CECO Field Service Information 01--21--72 3 10--15--93

1012 CECO Fuel Control Idle Speed Adjustment Cancelled

1013 CECO Fuel Control Throttle Shaft O--Ring Seal Replace- 08--25--72 3 03--31--76
ment

1014 AVGAS Mixture Using 100/130 Aviation Gasoline With Cancelled--Ref:

Commercial Jet A Turbine Fuel In Cold Weather Operation Ops. And Maint.
Manual

1015 Compressor Salt Water Contamination Removal Cancelled--Ref:

Ops. And Maint.
Manual

1016 Oxide Discoloration of Hot Section Components 02--13--73

1017 Maximum Continuous Power and Maximum Cruise Power 02--13--73

Ratings

M250--C20 INDEX
Revised March 3, 2020 PAGE 1 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1018 Maintenance Action--Engine Operation Beyond Limit of Cancelled--Ref:

107oC Oil Temperature. Ops. And Maint.
Manual

1019 Water Washing the Compressor in Cold Weather Cancelled--Ref:

Ops. And Maint.
Manual

1020 Contamination Removal (Water Rinse) Instructions Using Cancelled--Ref:

Water Only Ops. And Maint.
Manual

1021 Required 250--C20 Field Inspections Cancelled--Ref:

CSL--1007

1022 Starter Generator and Starter Generator Gearshaft Mating Cancelled--Ref:

Spline Wear Ops. And Maint.
Manual

A--1023 Extreme Turbine Outlet Temperature Effects on Turbines 08--01--73 4 09--05--75

1024 Inspection of MC--40 Fuel Control And Governor Speed 10--25--73

Rotor Weights

1025 Single Element Fuel Pump Shouldered Drive Shaft Inspec- Cancelled--Ref:
tion Ops. And Maint.
Manual

1026 Model 250 Engine Log Book Cancelled

03--24--08

1027 250--C20B Engine Time Between Overhauls Cancelled--Ref:

Ops. And Maint.
Manual

1028 250--C20B Engine Life Limited Parts Cancelled--Ref:

Ops. And Maint.
Manual

1029 Fuel System Leakage -- Inspection And Trouble Shooting Cancelled--Ref:

Ops. And Maint.
Manual

1030 250 Series Engines -- Cost Effect of Modular Overhaul Cancelled--Ref:

Ops. And Maint.
Manual

1031 250--C20 Engine Ground Starting Above 5000 Feet 07--08--74

1032 Purging of the CECO Fuel Control 07--15--74

1033 Bleed Valve Cleaning Cancelled--Ref:

Ops. And Maint.
Manual

1034 CECO Fuel Control Flushing Procedure to Remove 01--16--75

Suspected Internal Contamination

M250--C20 INDEX
Revised March 3, 2020 PAGE 2 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1035 CECO Power Turbine Governor Flushing Procedure to 01--16--75

Remove Suspected Internal Contamination

1036 Model 250 Reporting 02--20--75 8 02--07--11

1037 Power Turbine (N2) Rub Cancelled--Ref:

Ops. And Maint.
Manual

1038 CECO Fuel Control Cut--Off Valve Lever Adjustment 03--21--75

1039 Cleaning of the 250--C20/C20B Bendix AL--AA1 Power Cancelled--Ref:

Turbine Governor PG Air Circuit Ops. And Maint.
Manual

1040 Use of Unapproved Parts, Engines, Major Modules, or 07--10--75 7 02--12--02

Piece Parts That May Have Been in Long Term Storage in
Rolls-Royce Commercial Engines

1041 Proper Use And Mixture Ratios of Fuel System Icing 09--23--75
Inhibitor “PRIST”

1042 Cancelled Prior to Publication

1043 Cancelled Prior to Publication

1044 Noisy 250 Series Engine Fuel Pumps 11--26--75 4 06--08--04

1045 Replacement Interval of Fuel Inlet Filter Strainer in Bendix Cancelled--Ref:

Fuel Control Ops. And Maint.
Manual

1046 Model 250 Bendix Fuel System Certified Installation Kits 01--30--76 3 06--01--79

1047 CECO MC--40 Fuel System Daily Deceleration Check Cancelled--Ref:

Ops. And Maint.
Manual

1048 250 Compressor Erosion Inspection Cancelled--Ref:

Ops. And Maint.
Manual

1049 Troubleshooting The Start Derich System On Bendix Cancelled--Ref:

250--C20/C20B Ops. And Maint.
Manual

1050 250--C20C Engine Time Between Overhauls Cancelled

1051 250--C20C Engine Life Limited Parts Cancelled

1052 Oil Foaming And Oil Pressure Fluctuations 03--09--78

1053 Auto Reignition Control Box Assembly 06--30--76

M250--C20 INDEX
Revised March 3, 2020 PAGE 3 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1054 Engine Operating Procedures Cancelled--Ref:

Ops. And Maint.
Manual

1055 Gearbox, Wet Spline Starter--Generator Gearshaft (Cus- 03--31--78

tomer Option)

1056 Field Cleaning Procedure Relative to Carbon Caused Cancelled--Ref:

Turbine N2 Lockup. All Series I and II Model 250 Engines Ops. And Maint.
Manual

1057 Five Micron Low Pressure and High Pressure Filter 01--14--77
Elements--Approved Sources

1058 Increase Of Measured Gas Temperature (TOT) Starting Cancelled--Ref:

Limit Ops. And Maint.
Manual

1059 Fuel System Tubing -- Recommended Scheduled Inspec- 10--29--76

tions

A--1060 Power Turbine Outer Coupling Nut Inspection 10--27--76 5 07--22--94

1061 Fuel System -- Installation of High Pressure Fuel Filter As- 03--31--78
sembly

1062 Engine N2 Operating Speed Recommendation Cancelled--Ref:

CEB--A--1174

1063 Part Number 6853282 and 6887113 Third--Stage Turbine Cancelled

Wheel Replacement Schedule for Casting Sub--surface
Porosity

1064 100 Hour Cleaning of the 250--C20B Lubrication System Cancelled--Ref:

Ops. And Maint.
Manual

1065 Model 250--C20 Series Engine Idle Speed Setting for En- Cancelled--Ref:
gines Equipped with P/N 6887113 or 6888633 Third-- Stage CEB--A--1174
Turbine Wheels

1066 Part Number 6887113 and 6888633 Third--Stage Turbine Cancelled--Ref:

Wheel N2 Operating Restriction and Alternatives -- Over- CEB--A--1174
view

1067 250--C20/C20B Bendix DP--N1/N2 Fuel Control Air Circuit-- Cancelled--Ref:

Field Cleaning Ops. And Maint.
Manual

1068 250--C20/C20B Bendix DP--N1/N2 Fuel Control PR--PG Cancelled--Ref:

Valve Assembly--Field Cleaning Ops. And Maint.
Manual

1069 DDA Model 250 Customer Questionnaire Cancelled

M250--C20 INDEX
Revised March 3, 2020 PAGE 4 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1070 Application of Sealing Compound to the Nozzle Of The Cancelled--Ref:

Compressor Bleed Valve Assembly Ops. And Maint.
Manual

1071 Compressor Case Bolt Tightening Sequence Cancelled--Ref:

Ops. And Maint.
Manual

1072 250--C20F Engine Time Between Overhauls Cancelled--Ref:

Ops. And Maint.
Manual

1073 250--C20F Engine Life Limited Parts Cancelled--Ref:

Ops. And Maint.
Manual

1074 Inspection of FACET Low Pressure Fuel Filter Element Cancelled

(DDA P/N 6895177; Kit P/N 6895028)

1075 Cancelled Prior to Publication

1076 Turbine To Compressor Coupling Cancelled--Ref:

Ops. And Maint.
Manual

1077 Cancelled Prior to Publication

1078 Compressor Case Stator Vane To Rotor “Rub” 03--30--79

1079 High Pressure Fuel Filter (CECO Fuel System) Cancelled--Ref:

CEB--A--1095

1080 Model 250/225 Fuel System--Operational and Maintenance 05--11--79 2 11--01--88

Guidelines

1081 Air Purge of Low Pressure (LP) Fuel Filter for Single Cancelled--Ref:
Element Fuel Pumps on Boost Pump Equipped Aircraft Ops. And Maint.
Manual

1082 Lubrication System Troubleshooting 06--07--79 7 09--14--09

1083 Use of Silicone Base Molybdenum Disulphide and Nickel 07--06--79 2 02--15--80
Base Anti--Seize Compounds

A--1084 Third--Stage Turbine Wheels, Full or Center Slot Blade 07--15--79 4 09--01--94
Shroud Configuration, Replacement After Hot Start--Series
II Engines

1085 Recall of “PRIST” Packaged in Cans Manufactured By Cancelled

Continental Can Company

1086 Cancelled Prior to Publication

1087 Purchase of Detroit Diesel Allison Commercial Model 250 07--12--79

Engines

M250--C20 INDEX
Revised March 3, 2020 PAGE 5 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1088 Fuel Pump Filter By--Pass Valve--Periodic Operational Cancelled--Ref:

Check Ops. And Maint.
Manual

1089 Oil System Inspection and Maintenance Requirements on Cancelled--Ref:

Model 250--C20B, C20F, B17B, and B17C Engines Ops. And Maint.
Manual

1090 Fire Extinguisher Material (Cleaning) 09--28--79 1 12--01--80

1091 Fully Slotted Third--Stage Turbine Wheels, P/N 6887113 Cancelled--Ref:

CEB--A--1174

A--1092 Engine Flameouts Due to Snow or Ice Ingestion -- Warning 09--15--80 3 10--06--05

1093 Engine Oil Change Time Interval Cancelled--Refs:

Ops. And Maint.
Manual

1094 Bendix Gas Producer Turbine Fuel Control and Power 07--30--80
Turbine Governor “Stiff” Throttle Controls

1095 Special Inspections for Engines Operated in Volcanic Ash 06--02--80 5 01--05--07

1096 Compressor Case--Sealing of Cracked Plastic Liner Cancelled--Ref:

Ops. And Maint.
Manual

1097 Engine N1 Ground Operation and Speed Restriction Cancelled--Ref:

CEB--A--1174

1098 Sundstrand Grease Part Number Change 08--18--80

1099 Compressor Water Rinse On Engines with Water--Alcohol 07--30--80

Augmentation System Installed

1100 Fuel/Control System Air Leak Safety Warning 09--15--80 2 11--22--10

1101 Flight in Turbulence -- Safety Warning 09--30--80

1102 Heavy Maintenance Inspection Compliance -- Optional Gas Cancelled

Producer Turbine Replacement

1103 Spectrographic Oil Analysis Programs (SOAP) Versus 09--30--80 3 11--01--96

Magnetic Drain Plug Lights--Safety Warning

1104 Cancelled Prior to Publication

1105 Model 250 Series Engine Identification Cancelled

04--07--08

1106 Cancelled Prior to Publication

1107 Turbine “U” Ring Installation And Pressure Test Cancelled--Ref:

Ops. And Maint.
Manual

M250--C20 INDEX
Revised March 3, 2020 PAGE 6 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1108 List of Model 250 Publications Indicating the Latest Revision Cancelled
as of March 30, 1982

1109 Cancelled Prior to Publication

1110 250--C20J Engine Time Between Overhauls Cancelled--Ref:

Ops. And Maint.
Manual

1111 250--C20J Engine Life Limited Parts Cancelled--Ref:

Ops. And Maint.
Manual

1112 Inspection of No. 6 And 7 Bearing Pressure Oil Nozzle after Cancelled--Ref:
Removal Ops. And Maint.
Manual

1113 250 Series II Plugs for Bleed Air Port of Compressor Scroll 12--15--83 1 02--29--84

1114 Cancelled Prior to Publication

1115 Cancelled Prior to Publication

1116 Cancelled Prior to Publication

1117 Cancelled Prior to Publication

1118 Benefits of an External Scavenge Oil Filter 08--01--84 2 07--28--05

1119 TBO Extension Program, 250 Series Engines 09--14--84 3 04--30--96

1120 Model 250 Rework Parts Policy Cancelled

1121 Commercial Engine Bulletin Distribution 07--13--84

1122 Returning of CEB Compliance Sheets with 250 Engine 12--01--85 1 08--07--98
Module to be Repaired

1123 Commercial Engine Bulletin Classification 06--16--86 4 06--19--19

1124 Cancelled Prior to Publication

1125 Model 250 Alignment Build Procedures 12--01--85 1 05--27--86

1126 Guidelines for Operation of “On Condition” Modules 04--01--88

1127 Identification of Allison Power Parts (APP) 08--01--85 1 01--31--90

1128 Cancelled Prior to Publication

1129 Allison Recommended Bulletin Compliance for Turbine 09--30--85

Reliability

1130 Field Vibration Test Procedure 10--17--86 10 06--19--19

M250--C20 INDEX
Revised March 3, 2020 PAGE 7 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1131 Cancelled Prior to Publication

1132 Model 250 Module Serial Number Assignment 07--15--86

1133 Return of Parts for Field Investigation at Allison or Allison 04--20--86 2 10--01--96
Authorized Maintenance Centers (AMC)

1134 Correction of Typographical Error in the Log Book CEB List 06--16--86
Turbine S/N CAT 24028 And Up

1135 Contamination Removal (Water Rinse) Instructions Using 06--23--86 11 12--20--19

Water Only

1136 Publication Authorization Procedures 11--03--86 5 11--01--96

1137 Alert Document Compliance 01--31--87 3 10--01--96

1138 Allison 250--C20R Series Engine Designations and Conver- 04--01--87 2 08--01--91
sion Bulletin Information

1139 Longer Life Igniter Plugs 08--20--87 3 10--01--96

1140 Chafe Wrapping of Stainless Steel Tube Assemblies 05--01--88

1141 Warning Tags Attached to Fuel, Oil, Air Tubes, Fittings and 09--10--87 2 09--26--00
Associated Components on 250 Series Engines

1142 Guidelines for Operation of Manually Activated Fuzz 11--01--88

Burning Engine Chip Detectors

A--1143 Operational Warning--Height Velocity Diagram (Not a Cancelled

Restriction Nor a Limitation) 07--18--06

1144 Cancelled Prior to Publication

1145 Warning--Use of Proper Compressor Scroll To Pc Filter 05--01--88

Tube Assemblies

1146 Serial Number Effectivity, Allison Commercial Engine 05--01--88

Bulletins

1147 Commercial Engine Bulletin Incorporation Philosophy 04--30--88

1148 Installation of New Gas Produces Tiebolt Nut, P/N Cancelled

23039751

1149 Rolls-Royce Customer Training 08--01--88 21 05--27--15

1150 250 Series I and II Coated Compressor Wheels 08--01--88 1 04--01--89

1151 Cancelled Prior to Publication

1152 Cancelled Prior to Publication

M250--C20 INDEX
Revised March 3, 2020 PAGE 8 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1153 Translation of Allison Technical Publications into Foreign 11--01--88

Languages

1154 Use of Eastern European, United Kingdom, and Peoples 04--01--89 7 03--26--14
Republic of China Specification Fuels in Rolls--Royce M250
Engines

A--1155 Use of Salvaged or Scrapped Parts in Allison Model 250 12--01--88 1 08--15--91
Engines

1156 Auto Relight Kit Availability 12--01--88

1157 Cancelled Prior to Publication

1158 Cancelled Prior to Publication

1159 Seal Shelf Life (Age Control) 05--01--89 1 08--22--11

1160 Operation of Bendix Fuel Controls and Power Turbine 04--14--89

Governors Exposed to Fire or Severe Overtemperature

1161 Engine Tube Inspection, Aircraft Equipped with Aero 05--01--89

Engineering Air Conditioning

1164 Purolator/Facet External Scavenge Oil Filter Inspection 02--01--90 3 05--03--10

1165 Heavy Maintenance Inspection (HMI) Compliance Option A Cancelled

A--1166 Maintenance Warning -- External Lines 11--15--90 2 07--08--19

1167 Allison Auto Reignition Control System 12--31--89

1168 Model 250 Logbook Changes 11--15--94

1169 N2/NR Speed Setting 03--15--92

1170 Model 250 Engine Designations and Applications 11--30--91 5 07--13--15

1171 Model 250 Engine Mean Time Between Removal Experi- 01--31--91 2 05--30--94
ence and Recommendations on use of Overhauled First--
Stage Turbine Nozzles

1172 Compressor Case, Blade and Vane Erosion/Corrosion 02--28--91 5 05--20--13

Inspection

1173 “B” Nut Warning Placard Cancelled

1175 Cancelled Prior To Publication

1176 Optimized Start Technique for Allison 250--C20 Series and 12--15--92
C20R Series Engines

1177 “Premature Engine Removals due to Metal Generation from 04--30--93

the 2 1/2 Bearing”

M250--C20 INDEX
Revised March 3, 2020 PAGE 9 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1178 Unapproved Hot Engine Cool Down Procedure 03--01--93 1 11--13--01

1179 Recommendations in Conjunction with Engine Oil Change 04--30--93 1 04--15--98

1180 Operation and Maintenance Manual Publications Concern- 04--30--93

ing Magnetic Chip Detector Guidelines

1181 Authorized Allison Repair/Overhaul Facilities for the Allison Cancelled--Ref

Model 250 Engine Ops & Maint
Manual

1183 Change in Commercial Engine Bulletin Index Format 06--15--93

A--1186 Inspection, Rework, and Overhaul of Parts Manufactured 02--15--94 1 11--30--94

by Anyone Other Than Allison and/or Allison Approved
Vendors and Suppliers

1187 Model 250 Power By The Hour/Fleet Hour Agreement 09--30--94 6 Cancelled
Program 02--22--08

1188 Handling of Fluorocarbon Elastomer Preformed Packings 02--01--95

and/or Seals

1189 Allison Model 250 Engine Customer Support and Service Cancelled
Parts Telephone Numbers 02--01--02

1190 Cancelled Prior to Publication

1191 Use of Rolls-Royce Military Surplus Parts in Commercial 01--27--95 5 04--23--02

Engines Reissue

1192 Troubleshooting Guide for Bendix Fuel Control Systems 06--30--97

Used on Helicopters

1193 Recommended Use of Airframe Accessory Filter for 09--15--97

Remote Area Fueling

1195 Identification of A New Fuel Pump Vendor 11--01--95 1 06--30--97

1196 Optional Removal or Installation of Compressor Discharge 05--15--97

Tube to Fireshield Packing

1197 Model 250 Publications Procurement Policy 02--15--96 3 03--03--08

1198 Letterhead, Model 250 Commercial Engine Bulletins, 11--15--95

Commercial Service Letters and Installation Bulletins

1199 Manufacturing Origin Request Procedure 02--20--96 3 07--23--04

1200 Brokering of Rejected Series II Compressor Wheels 09--15--96

1201 Rolls--Royce Part or Assembly Modification 07--31-96 2 05--22--02

1202 No--Go Gages for Spline Inspection 11--15--97 Cancelled 02--10--14

M250--C20 INDEX
Revised March 3, 2020 PAGE 10 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1204 Disposition of Old Engine and Module Data Plate 10--15--97 3 02--24--16

1205 Return of Model 250 Field Parts for Investigation at 06--30--97 4 04--06--15
Rolls--Royce

1207 Commercial Engine Bulletin, CECO Fuel Pump 09--02--97

Spline Inspection

1208 Use of High Thermal Stability (HTS) or Third Generation 09--15--97 2 02--13--12
Oils

1209 Commercial Operation of Military T63 Engines 04--30--98 2 10--12--09

1210 Hot Corrosion -- Sulfidation 02--10--00 1 05-25-04

1211 Inconel Bellows Incorporation in All 250 AlliedSignal 02--27--98

(Bendix) Fuel Controls

1213 OEM Engine Warranty 04--15--99 1 07--08--16

A--1217 Model 250 Engine Cautions For Changes In Engine Noise 09--15--99

1218 Alternate Consumable Materials List 04--19--00 3 09--17--12

1219 Rolls-Royce Model 250/Aviall Parts And Technical Cancelled

Publication Distribution 01--25--02

1220 Manufacturing Tooling Marks On Tubing Assemblies 04--11--00 1 04--27--09

1221 Model 250 Lip Seals 09--07--00 3 05--16--14

1222 Engine -- New Publications Prices 08--01--00 1 08--24--00

Reissue

1223 Installation of The Enhanced Power Turbine Kit Hardware, 11--28--00

Series II Turboshaft Engine

1224 Special Pricing For 1st--stage Nozzle Shield Cancelled

07--18--06

A--1225 Honeywell Extension Of Inconel Bellows Special Pricing 12--20--00

1226 Second Stage Nozzle Special Pricing Policy Cancelled

03--15--10

1228 Black Oxide Removed From Specified Gears 04--05--01 1 04-08-03

1229 Use Of AN503-8-8 Screws In Honeywell Products 04--25--01

1230 Operations In Methane Laden Atmosphere 09--19--01

1231 Handling Instructions For Bare Metal Parts 09--19--01 1 10--19--01

Reissue

M250--C20 INDEX
Revised March 3, 2020 PAGE 11 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1232 Shipment Of Fuel System Components 11--15--01

1233 Rolls-Royce Model 250 Engine Customer Support And Cancelled

Service Telephone Numbers 03--20--08

1234 MTU Manufactured Parts 01--08--02 1 02--02--17

1235 Fuel System Contamination 04--23--02 2 07--20--09

1236 Compressor Splined Adapter Wear 01-13-03 1 01--22--03

Reissue

1237 Overhaul Manual MPI Requirements 01-13-03 1 01--22--03

Reissue

1238 Gearbox Bore Alignment Check 05-02-03 1 08--27--04

1239 Position Statement On Use of Red Dye Contaminated Fuel 02-27-03

1240 Goodrich Pump and Engine Control Systems, Inc. (GPECS) 08--26--04 1 09--17--04
AOG Hotline Reissue

1242 250 Engine Wash Procedures 05--27--04

1243 Cancellation Notice -- Cancellation of AMC--OIL’s and 05-13-04

AMC--IL’s

1244 Power Turbine Rotor Clamping 05-10-04

1245 Inspection for Engine Damage Following Failure of Non- 05-26-04 1 06--23--04
Rolls-Royce Provided Engine Hardware Reissue

1247 Model 250 E--Pubs Technical Publications Cancelled

03--20--08

1248 Improved Honeywell Power Turbine Governor Program Cancelled

01--05--09

1249 Suspect Repairs 10--31--05

1251 Oil Filter Cap 10--12--07

1252 M250 Engine Warranty Guidelines 11--15--06 2 07--27--16

1253 Maintenance of Turbine Oil Check Valve 02--07--07 1 09--07--09

1254 Quick Disconnect Magnetic Plug Installation 02--07--07 1 11--17--15

1255 Release of New Blisk Compressor Wheels 03--01--07

1257 Rolls--Royce Model 250 Fleet Hour Agreement Program Cancelled

10--07--09

1260 Rolls--Royce use of Self Adhesive Labels on Certain Parts 06--30--08

M250--C20 INDEX
Revised March 3, 2020 PAGE 12 OF 13
 Rolls--Royce
COMMERCIAL SERVICE LETTER INDEX

Date Revision Date

CSL No. Title/Description Published Number Revised

1261 Rolls--Royce Model 250 Series II Engines Compressor 05--01--09

Shafting Reminder

1262 TOTALCARE Comprehensive Maintenance Solution for the 10--07--09

M250 Engine

1263 Jet A--1 Fuel System Icing Inhibitor (FSII) Notice 07--26--10

1264 Rolls--Royce M250 Power Turbine Governor Assembly 03--21--11 1 11--11--16

Replacement Reminder

1265 Helicopter Wreckage in Brazil 08--06--12

1266 AD Note 2012--14--06 AMOC 08--06--12

A--1267 No. 2 Bearing Installation Information 03--04--13 1 03--24--14

A--1268 Enhanced Awareness of Outer Combustion Cracks (OCC) 03--04--13

1269 Release of New Accessory Seals 03--24--14 4 01--05--16

1270 New Directional PTO Seal Installation (For Single Lip Seal 08--08--14
Engines Only)

1271 Engine Control System-- Identification Plate Change 08--24--15

1272 Outer Combustion Case Leak TEC Inspection Video 10--19--16

1273 Release of B--Nut Tool (23083893) and Definition 10--24--16

1274 Electronic Availability of Commercial Service Letters 02--14--17 1 09--14--18

1275 Engine Assembly-- Parts Mutilation Manual 10--17--17

A--1276 First Stage Turbine Wheel Failure Followed By Inflight 12--05--17

Power Loss Due to Over--Temperature Engine Operation

A--1277 Enhanced Awareness of Loose or Broken Split Line Bolts/ 02--09--18

Studs

1278 Engine Preservation and Storage 04--24--19

1280 Engine-- Radiosotopes 11--07--19

1281 Oil Pressure Regulating Valve Adjustment 12--12--19

M250--C20 INDEX
Revised March 3, 2020 PAGE 13 OF 13