Finishes for Wood / Wall / Metal Surfaces

PRODUCT CODE 0053

Tractor Enamel
Asian Paints Tractor Enamel is an solvent based wood, metal and masonry finish for interiors that offers clean
shades and excellent gloss.

PRODUCT BENEFITS

Gloss Finish Durability

Tractor Enamel imparts a long lasting glossy The consistent and assured quality of Tractor SOLVENT BASED

finish to your wood, metal and masonry surfaces, Enamel gives you a durable finish at an
keeping them looking like new for longer. economical price.

Clean Shades
Tractor Enamel offers better and cleaner shades * All Asian Paints products contain no added
Lead, Mercury, Arsenic or Chromium
from April 2008.

PRODUCT FEATURES
WASHABILITY COLOURS AVAILABLE COVERAGE

BEST IN CLASS

HIGH
43* On smooth primed mild steel
surface by brushing

MEDIUM
1 COAT
LOW
*17 Direct shades and 26 tinted
shades. 140 - 170
sq.ft/ltr**
AVAILABLE PACKS FINISH
2 COATS
MATT LOW SHEEN HIGH SHEEN HIGH GLOSS 75 - 95
sq.ft/ltr**

SMOOTH
500 ml 1 ltr 4 ltr 10 ltr 20 ltr

Shelf life: 3 years from date of manufacture in original tightly Refer to sheen levels in technical details **Actual coverage may vary from the quoted coverage due
closed containers away from direct sunlight and excessive to factors such as method and condition of application and
heat. Also available in 50 ml, 100 ml and 200 ml. surface roughness and porosity.

HOW TO APPLY
PAINT APPLICATION PROCESS
APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
VISCOSITY** PERIOD
STEP 1
SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
STEP 2
METAL PRIMER (METAL) /
0005 / 0006 BRUSH 8 - 10 BRUSH 30 - 40
DECOPRIME ST WT (MASONRY) / MTO* 6 - 8 HRS
0359 / 0360 SPRAY 12 - 15 SPRAY 20 - 25
WOOD PRIMER (WOOD)

STEP 3
KNIFING PASTE FILLER (METAL / WOOD) 0016 BASED ON BASED ON 6 - 8 HRS
WALL PUTTY (MASONORY) WATER OR MTO*
1354 REQUIREMENT REQUIREMENT 4 - 6 HRS
PUTTY KNIFE
STEP 4
SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN

STEP 5
METAL PRIMER (METAL) /
0005 / 0006 BRUSH 4 - 10 BRUSH 30 - 40
DECOPRIME ST WT (MASONRY) / MTO* 6 - 8 HRS
0359 / 0360 SPRAY 12 - 15 SPRAY 20 - 25
WOOD PRIMER (WOOD)

STEP 6
SANDING SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN
STEP 7
FIRST COAT BRUSH 8 - 10 BRUSH 55 - 60
TRACTOR ENAMEL 0053 MTO* SPRAY 25 - 30 6 - 8 HRS
SPRAY 22 - 25
BRUSH / SPRAY

STEP 8
SECOND COAT BRUSH 8 - 10 BRUSH 55 - 60
TRACTOR ENAMEL 0053 MTO* SPRAY 25 - 30 6 - 8 HRS
SPRAY 22 - 25
BRUSH / SPRAY / ROLLER

1. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
2. Ensure that the metal substrates are free from oil, grease and rust before paint application.
*
Mineral Turpentine Oil
**As measured through a Ford cup B4.
Finishes for Wood / Wall / Metal Surfaces

HOW TO CHOOSE COLOURS

Browse through Asian Paints colour tools to help you find the right colour combination

COLOUR SPECTRA FAN DECK TRACTOR ENAMEL SHADECARD

ADDITIONAL INFORMATION

POST PAINTING CARE PRECAUTIONS

For removing stains. Sponge clean with a > Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
mild soap solution and wipe clean. Ensure a this level within 4 hrs of application.
drying time of 1 week before cleaning. > Do not over-thin or over-extend the brush.
> Tint using Asian Paints machine colourants only
> Stir well and strain before use.
TECHNICAL DETAILS > Tinted paints need thorough shaking immediately after tinter addition as well as before use.

a. Drying time: Surface dry time 3 hrs

b. Sheen levels: 75 - 85 on tin plate at 20 GH
c. Flash point IS 101/1987 Part 1 Sec 6: 35 SAFETY FEATURES
Deg C (95 Deg F)
d. Stability of thinned paint: To be used > Kindly refer to the MSDS for Asian Paints Tractor Enamel which gives detailed information on
within 24 hours safety measures while handling the paint, which is available on request.
> Store the container with the lid tightly closed in an upright position, in a cool, dry place.
> Keep out of reach of children and away from eatables.
> May be harmful if swallowed. In case of ingestion seek immediate medical attention.
> Wear eye protection during application. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
> In case of skin contact immediately wash skin with soap and plenty of water. Get medical
attention if irritation develops or persists.
> Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding
and surface preparation to avoid dust inhalation
> Do not pour leftover paint down the drain or in water courses.
> In the event of spills, contain spillage using sand or earth.
> No added Lead, Mercury or Chromium compounds.
Version No. VN01/01/2014

Version No. VN01/01/2014. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India