OWNER’S MANUAL

0309-04-GUS—10.04
© 2004 Gibson Guitar Corp.
To the new Gibson owner:

Congratulations on the purchase of your new Gibson electric guitar – the world’s most famous

electric guitar from the leader of fretted instruments.

Please take a few minutes to acquaint yourself with the information in this booklet regarding

materials, electronics, “how to,” care, maintenance and more about your guitar.

And then begin enjoying a lifetime of music with your new Gibson.
The Components of the Solidbody Electric Guitar 4
Gibson Innovations 6
The History of Gibson Electric Guitars 8

DESIGN AND CONSTRUCTION

Body 14
Neck and Headstock 14
Pickups 15
Controls 17
Bridge 19
Tailpiece 21

CARE AND MAINTENANCE

Finish 22
Your Guitar on the Road 23
Things to Avoid 24
Strings 25
Install your Strings Correctly 26
String Gauge 27
Brand of Strings 27
4
Strap Stopbar Tune-o-matic Three-way 12th Fret
Button Tailpiece Bridge Pickups Toggle Switch Marker/Inlay Neck Fret Fingerboard Nut Headstock

The Components
of the Solidbody
Electric Guitar
Featuring a Les Paul
Standard in Heritage
Cherry Sunburst
Input Jack Tone Volume Binding Body Single Truss Machine Tuning
Controls Controls Cutaway Rod Heads Keys
Cover
 5
Strap Stopbar Tune-o-matic 12th Fret
Button Body Tailpiece Bridge Pickups Neck Marker/Inlay Fret Fingerboard Nut Headstock

Three-way
Toggle
Switch

The Components
of the Solidbody
Electric Guitar
Featuring a V-Factor Faded
in Worn Cherry

Input Jack Tone Volume Pickguard Truss Machine Tuning

Control Controls Rod Heads Keys
Cover
6
Here are just a few of the Gibson innovations that have reshaped the guitar world:

1894 – First archtop guitar

1922 – First ƒ-hole archtop, the L-5
1936 – First professional quality electric guitar, the ES-150
1947 – P-90 single-coil pickup introduced
1948 – First dual-pickup Gibson, the ES-300
1949 – First three-pickup electric, the ES-5
1949 – First hollowbody electric with pointed cutaway, the ES-175
1952 – First Les Paul guitar
1954 – Les Paul Custom and Les Paul Jr. introduced
1955 – Les Paul Special introduced
1957 – First humbucking pickup
1958 – Flying V and Explorer introduced
 7
1958 – First semi-hollowbody guitar, the ES-335
1961 – SG body style introduced in the Les Paul line
1963 – Firebird guitars and Thunderbird basses introduced
1969 – Les Paul Personal and Professional with low-impedance pickups introduced
1979 – L.P. Artist with active electronics introduced
1982 – First solidbody acoustic, the Chet Atkins CE
1983 – Les Paul Studio introduced
1990 – Les Paul Classic introduced
1996 – Les Paul SmartWood introduced
1998 – Double-Cutaway Les Paul Standard introduced
2002 – Gibson Digital Guitar introduced
8
A BRIEF HISTORY OF GIBSON ELECTRIC GUITARS
Gibson’s legendary acoustic engineer, Lloyd Loar, was experimenting with electric
instruments in 1924, at the dawn of electronic amplification. However, Gibson’s strug-
gle to dominate the banjo market took precedence through the 1920s, and it wasn’t
until the mid-1930s that the company once again turned its attention to electric
guitars. In 1935 Gibson’s Walt Fuller designed a pickup that was introduced on the
E-150, an aluminum-body lap steel. Early in 1936, the pickup was put in a midline
archtop model and named the ES-150 – ES for Electric Spanish, 150 for the retail
price of $150 for the guitar and amplifier set.

The original ES-150 bar pickup with its hexagonal housing is now known as the
“Charlie Christian” pickup, because it was installed on the ES-150s and ES-250s that
Christian used to establish the new concept of electric jazz guitar.

Gibson made several improvements in pickup design before World War II, although
many players still consider the “Christian” pickup to be the best jazz pickup ever
 9
made. Immediately after World War II, Gibson introduced the P-90 single-coil, with six
adjustable polepieces and a black plastic cover, usually with “dog-ear” mounting
extensions. The P-90 is still in production and still sets the industry standard for a sin-
gle-coil pickup.

The first postwar Gibson electrics followed the prewar concept of an electric guitar as
a conventional acoustic archtop with a pickup installed on the top. Gibson added a
second pickup to the ES-300 in 1948 and then became the first company to offer a
three-pickup model with the introduction of the ES-5 in 1949.

Although the advantages of a solidbody guitar had been known to Hawaiian steel gui-
tarists for almost twenty years, it took the persuasive powers of Les Paul, the world’s
most famous guitarist in the early 1950s, to convince Gibson to make a “Spanish
style” solidbody. Gibson designed the new model with a carved top, not only to give it
the look of a traditional archtop – a style invented by Gibson – but also to make it dif-
ficult for other makers to copy. Les, who had been playing a homemade solidbody gui-
tar, nicknamed The Log, since 1941, specified a maple top cap to increase sustain,
10
coupled with a mahogany back to lighten the weight. Les also specified the famous
“goldtop” finish.

The Les Paul Model debuted in 1952. The bridge and tailpiece were upgraded when
Gibson introduced the patented tune-o-matic bridge in 1954, and the original single-
coil pickups were upgraded with the introduction of Gibson’s patented humbuckers in
1957. Otherwise, the original Les Paul is essentially the same guitar today as it was
when it was introduced.

In 1954 the growing popularity of the Les Paul Model prompted Gibson to expand the
line. On the high end, the Les Paul Custom sported an ebony finish and low frets for
fast action, and it immediately gained two nicknames: the Black Beauty and the
Fretless Wonder. On the more affordable end, the Les Paul Jr. featured a flat “slab”
top and a single pickup, and it became the best-selling Les Paul of the 1950s.

One year after the Les Paul Jr., Gibson offered a two-pickup version of the slab-body
model called the Les Paul Special. The Special was further distinguished by its yellow
stained “TV” finish.
 11
The double-coil humbucking pickup, invented by Gibson engineer Seth Lover, debuted
in 1957 on the Standard and Custom, introducing the sound that would shape rock
and roll music in the 1960s.

In 1958, Gibson introduced more important design innovations than in any other
year in the company’s history. Gibson president Ted McCarty combined the look of an
ƒ-hole archtop with the performance of a solidbody and came up with a completely
new type of guitar – the semi-hollowbody ES-335. McCarty also designed two radical-
ly modern solidbody shapes: the Flying V and Explorer.

The body of the Les Paul Jr. received a pair of rounded horns to become Gibson’s first
double-cutaway solidbody. And the finish color on the Les Paul Model was changed to
Cherry Sunburst, which let the grain of the maple top show through. The model name
was changed to Les Paul Standard, and the sunburst Standards from 1958-60 would
become some of the most valuable collectibles in the guitar world. All of this happened
in 1958.
12
The new Les Paul Jr. set in motion a complete redesign of the Les Paul line. In 1959
the Special went to the rounded-horn double-cutaway shape and was renamed the SG
Special (SG for Solid Guitar). In 1960, all four models were revamped and given a new
“SG” body shape, featuring a thinner, double-cutaway body with pointed horns. The
Custom, Standard and Jr. retained the Les Paul designation through 1962, after which
they became SG models.

Gibson’s design innovation continued into the 1960s when Ted McCarty hired leg-
endary automotive designer Ray Deitrich to design a Gibson. The result was the
Firebird series, and the companion Thunderbird bass series of 1963. The Firebirds
“reversed” conventional designs, with their elongated treble-side horn and treble-side
tuners. They also introduced neck-through-body construction and smaller “mini-hum-
bucking” pickups to the Gibson line.

In response to the rising demand for 1950s-style Les Pauls, the carved-top models
were reintroduced in 1968. A new model, the Les Paul Deluxe, featuring mini-hum-
bucking pickups appeared in 1969. The Special was revived in the 1970s and the Jr.
 13
reappeared in the 1980s. The Flying V, Explorer and Firebird were also brought back
into regular production, as musical styles began to catch up with these ahead-of-their-
time designs.

While the original four Les Paul models continued as the foundation of the line, Gibson
offered new variations, such as the Studio, Classic and Double-Cut Standard, in order
to give musicians all the features they wanted in a Les Paul guitar. In the 50-plus years
of the Les Paul, Gibson has offered more than 100 different variations. In 2003
Gibson honored Les Paul for his achievements as a performer, recording innovator and
guitar designer by presenting him a special Artist for Eternity award.

As Gibson celebrated the 50th anniversary of the Les Paul in 2002, the company
rocked the guitar world once again by introducing the first digital electric guitar. It rep-
resents the biggest advance in electric guitar design since the instrument was invent-
ed, and moreover, it serves notice that Gibson electric guitars will continue to epito-
mize the highest levels of Quality, Prestige and Innovation.
14
DESIGN AND CONSTRUCTION

Body. The solidbody guitar was invented to increase sustain, produce a brilliant tone and
eliminate feedback caused by a vibrating top. These qualities are enhanced by wood with
high density, such as maple. Les Paul would have preferred for his model to have had a solid
maple body, but density translates to weight, and a solid maple Les Paul Model would have
been exceedingly heavy. A compromise was reached, with lighter-weight mahogany used for
the main part of the body and maple for the top cap. Most of the carved-top Les Pauls have
the combination maple/mahogany body, while the “slab” or flat top models have a solid
mahogany body. Flying V’s, Explorers and Firebirds have a solid mahogany body.

Neck and Headstock. Mahogany is a time-proven material for guitar necks, and the necks
of most Gibson USA models are constructed of a single piece of mahogany. The
 15
Firebird or Thunderbird IV bass neck is made of nine-ply mahogany and walnut (or all
mahogany laminates), and it extends completely through the body. Fingerboards are of
ebony or rosewood.

Neck Specifications. Gibson designs its guitar necks to complement and enhance the
unique characteristics of each model. Neck profiles can be “rounded ’50s” or “slim
’60s” (or a slight V-shape available only on the BluesHawk). Scale length (string
length) is 24 3/4" on the Les Paul, X-Factor and SG models, 25 1/2" on the Chet
Atkins, Americana and Hawk models and 34" on basses.

Pickups. Humbucking (double-coil): Most Les Pauls have double-coil humbucking

pickups, which were designed to do what their name says: “buck” the hum caused by
fluorescent lights, rheostats and other electrical interference. They accomplish this
with two coils of wire, wound in opposite directions so that they cancel out interference.
Also, they produce a powerful sound that is the foundation of rock and roll music.
16
Gibson produces humbuckers in a variety of subtle variations, achieved by the use
of different magnets and different combinations of winding turns. In addition, some
Les Pauls have humbuckers without the metal cover pieces, which results in a hotter
signal. For individual model and pickup specs, please refer to Gibson’s website,
www.gibson.com.

P-90 (single-coil): Only a few Gibsons – some Les Paul Jr.’s, Les Paul Specials and
Melody Makers – have single-coil P-90 pickups. Some have the original “dog-eared”
covers; those without the “dog ears” are nicknamed “soapbar” because the original
cream-colored plastic covers on the 1952 Les Paul Model resembled bars of soap.
When the P-90 was introduced in 1946, it was the most powerful pickup of its kind.
And it still is. Among the many examples of the P-90 sound are Carlos Santana’s Les
Paul Special on Santana’s classic recordings, Leslie West’s Les Paul Jr. with the group
Mountain, and The Who’s Pete Townshend with an SG Special on Live at Leeds and at
Woodstock.
 17
Pickup adjustments. Although the pickups on each Les Paul are set to Gibson stan-
dards at the factory, they can be adjusted. The height of the pickup can be adjusted
by the two screws found at either end of the pickup, in the mounting ring. Individual
string volume can be adjusted by turning the polepiece screws. Bringing the pickup or
pole screw closer to the strings makes the signal stronger or “hotter.”

Controls. The standard Gibson electronic configuration is two pickups, four knobs and
a pickup selector switch. The four knobs provide individual tone and volume control
for each pickup. Models with only three knobs provide individual volume and master
tone control. Single pickup models have only two knobs – for volume and tone control
– and no pickup selector.

Volume controls: The two knobs closest to the fingerboard control the volume of the
pickups. The volume knob nearest the bridge controls the “front” or neck pickup; the
knob nearest the edge of the guitar controls the “back” or bridge pickup.
18
Tone controls: The knob or knobs farthest away from the fingerboard control tone. The
tone knob nearest the bridge controls the “front” or neck pickup; the knob nearest the
edge of the guitar controls the “back” or bridge pickup.

The tone controls are the “treble roll off” or “cut” variety. The tonal quality of the
instrument is darkened by the reduction of treble rather than the addition of bass. The
tone control turned all the way counterclockwise results in maximum reduction of tre-
ble and produces the “darkest” sound. The tone control turned clockwise to its maxi-
mum position allows the pickup’s full harmonic frequencies to pass through, produc-
ing the guitar’s brightest sound.

Pickup selector switch: The selector switch has three positions. The position toward
the neck selects only the “front” or neck pickup. The position toward the bridge of the
guitar selects only the “back” or bridge pickup. The middle position engages both pick-
ups. The tone and volume controls will only be active when the corresponding pickup
is selected. On models with three pickups, the selector switch activates the front pick-
 19
up (front position), the middle and back pickup together (middle position), and the
back pickup (back position).

The Tune-o-matic Bridge. The Tune-o-matic bridge allows for adjustment in overall bridge
height and individual string length. Height is adjustable up and down by means of
thumb nuts under the bridge at either end. Each string saddle is adjustable forward
and back with a small standard screwdriver. Action adjustment (up and down) is set at
the factory to the correct height for playing comfort and for buzz-free action. Raising
the bridge will result in stiffer action; lowering the bridge will result in faster action but
may also result in fret buzz. Climatic or humidity changes, or changes in string gauge,
may necessitate a bridge adjustment.

Any change – in bridge height, string gauge or climate – can affect the intonation and
cause a guitar to play out of tune in some fret positions. When this happens, the string
length needs to be adjusted, and this is accomplished by moving the individual sad-
20
dles forward (toward the neck) or backward (toward the tailpiece). The screw heads are
on the pickup side of the bridge, although there are many Gibsons that have the screw
heads facing the tailpiece. To check intonation, compare the pitch of a string that is
fretted at the 12th fret against the harmonic at the 12th fret (accomplished by touch-
ing the string lightly with the left hand, without pressing it all the way to the fret). If
the fretted note is higher than the harmonic, the string should be lengthened by mov-
ing the saddle toward the tailpiece until the two notes are the same. If the fretted note
is lower than the harmonic, the string length should be decreased.

The tune-o-matic bridge was designed to adjust for string changes (gauge or type) and
other physical changes but not for problems with intonation due to string wear. Should
a string lose its intonation due to wear, we strongly recommend changing the string
and not the bridge setting.
 21
Adjustable Stopbar Tailpiece. The stopbar tailpiece may be adjusted up or down to change
the downward pressure across the bridge. There is usually no need to adjust the stop-
bar unless the strings are moving out of the saddles, in which case the stopbar should
be lowered.
22
CARE AND MAINTENANCE

Finish. A Gibson instrument always attracts attention, whether it is on a concert stage

before thousands or on a guitar stand in a home studio. After the classic body lines of
a Gibson, the finish makes the strongest impression.

Perspiration acids, heavy fingerprinting, dust and grime from on-the-job usage are
unavoidable. However, a minute or two spent with Gibson’s instrument care products
– guitar polish, fretboard conditioners, string cleaner/lubricant and polishing cloth –
will restore a finish to like-new condition.

Gibson’s nitrocellulose lacquer finish not only looks great, it is also easily repairable –
by a professional. Minor scratches and dings can be fixed without completely refin-
ishing the instrument.
 23
Keeping Your Guitar on the Road. Your Gibson is a durable instrument. It is likely to out-
live you – if you take care of it. In determining whether conditions might be harmful
to your guitar, the rule of thumb is, if you are comfortable, then your guitar will be com-
fortable. Here are some conditions to avoid.

Heat and cold: Gibson’s nitrocellulose finish can expand or contract to adjust to
extreme temperatures and humidities – but not to sudden changes in temperature or
humidity. Just as a hot drink will crack a chilled glass, the finish of a Les Paul will
crack if a guitar that has been sitting in the trunk of a car in wintertime is suddenly
exposed to the warm air of a heated room. In these conditions, let the guitar warm up
gradually inside the case before opening the case.

Rain: Water wipes off the instrument’s finish easily, but if allowed to remain, it can
cause ugly water spots in the lacquer.

Sun: Avoid direct rays of the sun on your Gibson. Direct sunlight can blister or dis-
color the finish.
24
More Things to Avoid. When using a shoulder strap for a standing playing position, check
that all contact points and strap fasteners are secure.

Guitar stands with rubber supports that contain dye or plasticizers can “eat away” at
the lacquer finish or leave a stain on your guitar that goes through the lacquer finish
and into the wood. These stains are permanent and this sort of damage is not covered
under your warranty. We recommend covering the rubber parts of the stand with a soft
cotton cloth (such as a guitar polishing cloth) and using a guitar stand only for tem-
porary “storage” of your instrument.

Avoid sharp blows to any part of your instrument. Be particularly alert to possible blows
to the back of the headstock, machine heads (tuners) and in the neck heel area. Many
headstock breaks are the result of a guitar being knocked over or dropped while it’s still
in the case, so do not stand the case on its end.

Should major adjustments become necessary, contact your local authorized Gibson
dealer or service center.
 25
Strings. Fresh strings are a vital part of that “new instrument” sound. When strings
begin to go dead, a guitar loses its edge, and as the strings undergo further wear and
tear they go “dead.” Your Gibson will sound its best with new strings.

How often should you change strings? That depends on how much you play your gui-
tar, how hard you play and also on your individual body chemistry. Some professional
musicians change strings before every show in order to maintain the brightest edge on
their sound. More casual players may only need to change strings every month or two.
For some players, even light perspiration shortens the life of their strings. The sound
of the strings is the only sure way to judge whether or not they need to be changed.
And if one string needs to be changed, the others can’t be far behind. To maintain tonal
balance, change the whole set.

When changing strings, we recommend changing one string at a time in order to main-
tain tension on the neck and bridge. The pressure of the strings holds the bridge and
saddles in place, and removing all the strings could necessitate a new setup.
26
Use high quality strings. The most obvious action you can take to maximize the life
and performance of your strings is to use high quality strings. Your Gibson comes from
the factory with a set of strings made by Gibson and designed exclusively for Gibsons.
Although the string set from the Gibson factory is suitable for virtually any style of
music, Gibson offers a variety of string styles and gauges for specialized purposes.

Install your strings correctly. Improperly installed strings can slip, which will cause your
Gibson to constantly go out of tune. To correctly install strings:

1. Be certain the first winding of the string around the machine head
stem (tuner post) goes over the exposed tip of the new string. The rest of
the winding should then go under the exposed tip of the new string. When
pressure is applied by tightening the string to pitch, a clamping action
keeps the string from slipping around the machine head stem.

2. Be certain the string is wrapped around the tuner post an adequate

 27
number of times. For unwound strings, at least five turns around the
machine head stem are necessary. For wound strings, two or three turns
are adequate.

What gauge strings should be used? Your Gibson guitar comes strung with “10’s” –
which means the high-E string is .010 inches in diameter. The low-E is .046 inches
in diameter. The set is designed so that all six strings have the same amount of ten-
sion, ensuring that the action and the volume will be consistent across the entire fin-
gerboard. Gibson offers “9’s,” “11’s” and a variety of other gauges and compositions,
all of which are balanced for consistent tension.

What brand of strings should be used? Gibson has been offering its own strings since
1907, and Gibson has more experience than any other string maker when it comes to
matching strings to Gibson guitars. Gibson strings are manufactured to exacting stan-
dards to achieve the highest level of quality and performance.
A LIFETIME OF MUSIC
Your Gibson electric guitar is a lifetime investment. With proper care, it will not only
maintain its value as a top quality instrument, it will also continue to pay musical div-
idends for generations to come.

Your investment in the world’s finest electric guitar is supported by the #1 Customer
Service team in the musical instrument industry. To contact a Gibson Customer Service
Representative call 1.800.4GIBSON or email us at service@gibson.com.

For more information on Gibson

products and accessories, please visit
www.gibson.com or call 1.800.4GIBSON.
309 Plus Park Boulevard Nashville, TN 37217 USA 1.800.4GIBSON www.gibson.com