I/O Module Configurator: Controller # - Process Area
I/O Module Configurator: Controller # - Process Area
I/O Module Configurator: Controller # - Process Area
IP Address |_|_|_| . |_|_|_| . |_|_|_|. |_|_|_|; Subnet Mask |_|_|_| . |_|_|_| . |_|_|_|
Peer Network Name |_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_| (up to 16 ASCII char's)
Peer Network Controller Name |_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_| (up to 16 ASCII char's)
Alias Name |_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_| (up to 16 ASCII char's)
(3)
Rack # 1 Enclosure ID: __________________
(4) 1 2 3 4 5 6 7 8 9 10 11 12
Module #
(5)
Module Type
(6)
Jumper comb
(3)
Rack # 2 Enclosure ID: __________________
(4) 1 2 3 4 5 6 7 8 9 10 11 12
Module #
(5)
Module Type
(6)
Jumper comb
(3)
Rack # 3 Enclosure ID: __________________
(4) 1 2 3 4 5 6 7 8 9 10 11 12
Module #
(5)
Module Type
(6)
Jumper comb
(3)
Rack # 4 Enclosure ID: __________________
(4) 1 2 3 4 5 6 7 8 9 10 11 12
Module #
(5)
Module Type
(6)
Jumper comb
(3)
Rack # 5 Enclosure ID: __________________
(4) 1 2 3 4 5 6 7 8 9 10 11 12
Module #
(5)
Module Type
(6)
Jumper comb
(1)
Optional; assigned per user's convenience. (Refer to user-generated Site and Network Maps.)
(2)
Optional; assigned per user's convenience. (Refer to user-generated Site Map.)
(3)
Optional; assigned per user's convenience. (Refer to user-generated Site Map.)
(4)
Module # = Slot number in rack.
(5)
Module Type: AI = Analog Input; AO = Analog Output; DCI = DC Digital Input; ACI = AC Digital Input CI =
Contact Input; DCO = DC Digital Output; ACO = DC Digital Output; RO = Relay Output.
(6)
Jumper Comb: specify: none ( - ), 2-position (2), or 10-position (10)
I/O Module Channel Assignment Configurator
(1)
1. Network # |____|
(2)
2. Network Name |_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|
(3)
2. Controller Name |_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_| Alias Name |_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|_|
Rack # 1 2 3 4 5 (4)
(5) (5) (5) (5)
Slot # 1 5 9 Slot # 2 6 10 Slot # 3 7 11 Slot # 4 8 12
(6) (6) (6) (6)
Module Type ____ Module Type ____ Module Type ____ Module Type ____
9 9 9 9
10 10 10 10
11 11 11 11
12 12 12 12
13 13 13 13
14 14 14 14
15 15 15 15
16 16 16 16
(1)
Optional; assigned per user's convenience.
(2)
Assigned in Peer Network configuration.
(3)
Assigned in Peer Network configuration.
(4)
To specify rack, encircle appropriate number.
(5)
This configurator is intended for four contiguous slots; specify by encircling appropriate numbers (e.g., 1, 2, 3,
4 or 5, 6, 7, 8 or 9, 10, 11, 12).
(6)
Specify Module Type: AI = Analog Input; AO = Analog Output; DCI = DC Digital Input; ACI = AC Digital Input
CI = Contact Input; DCO = DC Digital Output; ACO = DC Digital Output; RO = Relay Output
(Ensure that Module Type specified here agrees with that entered in the I/O Module Configurator.)
(7)
To specify rack, encircle appropriate number.