Catalog HY14-2502/US Flow Control Valves

Technical Information Series F

General Description
Series “F” flow control valves provide precise control of
flow and shut-off in one direction, and automatically
permit full flow in the opposite direction.
Operation
A two-step needle allows fine adjustment at low flow by
using the first three turns of the adjusting knob. The
next three turns open the valve to full flow, and also
provide standard throttling adjustments.
Features
• The exclusive “Colorflow” color-band reference scale on
the valve stem is a great convenience and time-saver in
setting the valve originally and in returning it to any
previous setting.
• A simple set screw locks the valve on any desired setting.
• A tamperproof option (T) feature is also available to
prevent accidental or intentional adjustment of flow
setting.

Specifications Performance Curves

Maximum Brass: 140 Bar (2000 PSI); Controlled Flow vs. Pressure Drop
Operating except for F1600 brass Needle Full Open
PSI Bar 100 SSU, Hydraulic Oil, S.G. = 0.857
Pressure which is 35 Bar (500 PSI) 160 11.0

F Steel &
Stainless
345 Bar (5000 PSI) for
200 thru 1020; 140 9.7 Models 400
Steel: 207 Bar (3000 PSI) for and 620 (#4) Model 200
120 8.2
all other sizes
Pressure Drop

100 6.8
Return Check Models 400 Models 600
H Poppet, Nominal
Cracking Pressure
0.4 Bar (5 PSI) 80 5.7
and 620 and 820

60 4.1
Poppets Soft seal poppet in brass
200 - 820 sizes 40 2.7
Solid metal 416 stainless steel
20 1.4
poppet on all other sizes and
styles 0
LPM 3.8 7.6 11.4 15.1 18.9 22.7 26.5 30.3
Operating -40°C to +121°C (-40°F to +250°F) 0
GPM 1 2 3 4 5 6 7 8
Temperature Flow

Controlled Flow vs. Pressure Drop Controlled Flow vs. Pressure Drop
Needle Full Open Needle Full Open
PSI Bar 100 SSU, Hydraulic Oil, S.G. = 0.857 PSI Bar 100 SSU, Hydraulic Oil, S.G. = 0.857
160 11.0 160 11.0

140 9.7 140 9.7

Model
1620
120 8.2 120 8.2
Model 800 Models 1600 Models 2020
Pressure Drop

Pressure Drop

and 1020 2000, 2400, and 2420

100 6.8 100 6.8
and 3200
80 5.7 80 5.7
Models 1200
and 1220
60 4.1 60 4.1
Model 1600 Model 3220
40 2.7 40 2.7

20 1.4 20 1.4

0 0
LPM 18.9 37.9 56.8 75.7 94.6 113.6 132.5 151.4 LPM 75.7 151.4 227.1 302.8 378.5 454.2 529.9 605.6
0 0
GPM 5 10 15 20 25 30 35 40 GPM 20 40 60 80 100 120 140 160
Flow Flow
2502-F2.p65, dd

F4 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
Catalog HY14-2502/US Flow Control Valves
Ordering Information Series F

F
Options Series Size Material Needle Other Seal Design
Options Options Compound Series
NOTE:
Not required
when ordering.

Code Description Code Description

Omit NPTF/SAE Omit Nitrile (Standard)
8 BSPT V Fluorocarbon
9 BSPP

200 * 800*† 1600 * 2400 Code Description

400 *† 820* 1620 2420
420 * 1020 2000 3200 Omit Standard Knob
600 *† 1200 * 2020 3220 T* Tamperproof
620 1220 F Finger Screw
* Sizes available in Brass
† Sizes available in Stainless Steel * Not available above
1200 size.

Code Description Code Description

B Brass Omit Standard
S Steel 4 Fine Metering
SS * Stainless Steel (200, 400,
Series F Brass Valves can be
used for both air and oil service.
* Available in 400, 600 and 800
600, 620 sizes)
F
sizes.

Model Weight Model Weight

Number kg (lbs.) Number kg (lbs.)
F200 0.1 (0.3) F1220 1.2 (2.6)
F400 0.2 (0.5) F1600 2.3 (5.1)
F420 0.2 (0.5) F1620 2.3 (5.1)
F600 0.3 (0.7) F2000 3.7 (8.1)
F620 0.3 (0.6) F2020 3.7 (8.1)
F800 0.7 (1.5) F2400 4.6 (10.2)
F820 0.5 (1.0) F2420 4.6 (10.2)
F1020 0.8 (1.8) F3200 7.9 (17.4)
F1200 1.2 (2.6) F3220 7.9 (17.4)

2502-F2.p65, dd

F5 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA
 Catalog HY14-2502/US Flow Control Valves
Dimensions Series F

Inch equivalents for millimeter dimensions are shown in (**)

E
D

Controlled Flow
H

C
Closed
FAST
B
Open

G
A
F Sq. (Both Ends)

F Model Max Flow

Number LPM (GPM) A B C D E F G H
F200 11 1/8–27 NPTF 39.1 35.3 50.8 32.5 16.0 7.9 19.1
(3) (1.54) (1.39) (2.00) (1.28) (0.63) (0.31) (0.75)
F400 19 1/4–18 NPTF 45.5 40.4 66.8 42.2 20.6 10.4 20.6
(5) (1.79) (1.59) (2.63) (1.66) (0.81) (0.41) (0.81)
H F420 11
(3)
7/16–20 UNF
#4 SAE
41.4
(1.63)
37.6
(1.48)
68.3
(2.69)
42.9
(1.69)
20.6
(0.81)
10.4
(0.41)
19.1
(0.75)
F600 30 3/8–18 NPTF 55.4 49.5 69.9 44.5 25.4 12.7 25.4
(8) (2.18) (1.95) (2.75) (1.75) (1.00) (0.50) (1.00)
F620 19 9/16–18 UNF 47.7 42.7 79.2 48.8 25.4 12.7 20.6
(5) #6 SAE (1.88) (1.68) (3.12) (1.92) (1.00) (0.50) (0.81)
F800 57 1/2–14 NPTF 68.6 61.5 87.4 56.6 31.8 16.0 30.2
(15) (2.70) (2.42) (3.44) (2.23) (1.25) (0.63) (1.19)
F820 30 3/4–16 UNF 56.9 51.1 88.9 53.8 28.4 14.2 25.4
(8) #8 SAE (2.24) (2.01) (3.50) (2.12) (1.12) (0.56) (1.00)
F1020 57 7/8–14 UNF 68.6 61.5 101.6 65.0 31.8 15.7 30.2
(15) #10 SAE (2.70) (2.42) (4.00) (2.56) (1.25) (0.62) (1.19)
F1200 95 3/4–14 NPTF 85.9 71.4 98.6 65.5 38.1 19.1 35.1
(25) (3.38) (2.81) (3.88) (2.58) (1.50) (0.75) (1.38)
F1220 95 1 1/6–12 UN 85.9 71.4 117.3 76.5 38.1 19.1 35.1
(25) #12 SAE (3.38) (2.81) (4.62) (3.01) (1.50) (0.75) (1.38)
F1600 151 1–11 1/2 NPTF 123.7 106.9 127.0 81.8 44.5 22.4 47.8
(40) (4.87) (4.21) (5.00) (3.22) (1.75) (0.88) (1.88) *
F1620 151 1 5/16–12 UN 130.8 114.0 142.7 88.9 57.2 28.4 47.8
(40) #16 SAE (5.15) (4.49) (5.62) (3.50) (2.25) (1.12) (1.88) *
F2000 265 11/4–11 1/2 NPTF 130.0 113.3 143.0 98.6 57.2 28.7 47.8
(70) (5.12) (4.46) (5.63) (3.88) (2.25) (1.13) (1.88) *
F2020 265 1 5/8–12 UN 140.2 123.4 165.1 108.0 69.9 35.1 47.8
(70) #20 SAE (5.52) (4.86) (6.50) (4.25) (2.75) (1.38) (1.88) *
F2400 379 1 1/2–11 1/2 NPTF 136.4 119.6 143.0 113.5 69.9 35.1 47.8
(100) (5.37) (4.71) (5.63) (4.47) (2.75) (1.38) (1.88) *
F2420 379 1 7/8–12 UN-2B 143.5 126.7 184.2 127.0 76.2 38.1 47.8
(100) #24 SAE (5.65) (4.99) (7.25) (5.00) (3.00) (1.50) (1.88) *
F3200 568 2–11 1/2 NPTF 146.1 129.3 165.1 134.9 88.9 44.5 47.8
(150) (5.75) (5.09) (6.50) (5.31) (3.50) (1.75) (1.88) *
F3220 568 2 1/2–12 UN 163.6 139.4 228.6 155.7 101.6 50.8 47.8
(150) #32 SAE (6.44) (5.49) (9.00) (6.13) (4.00) (2.00) (1.88) *
* = Hex
2502-F2.p65, dd

F6 Parker Hannifin Corporation

Hydraulic Valve Division
Elyria, Ohio, USA