S30 NON-METALLIC CONTAINMENT DUTY PUMP

TECHNICAL DATA SHEET

SERIES
CONTAINMENT DUTY BALL VALVE PUMPS
The only complete line of AODD pumps featuring superior fluid containment;
protecting your people, environment, and pump.

PERFORMANCE
SUCTION / DISCHARGE PORT SIZE
• 3” ANSI Flange or 80mm DIN Flange
CAPACITY
• 0 to 280 GPM (0 to 1060 LPM)
AIR DISTRIBUTION VALVE
• No-lube, no-stall design
BAR

20 (34)
PSI

SOLIDS-HANDLING 40 (68) Performance based on water at ambient temperature.

60 (102)
• Up to .75 (19 mm) 7 100
100 P 80 (136) AIR CONSUMPTION IN SCFM
SI (6.8
HEADS UP TO Bar) AIR PRESSURE IN PSI

• 100 psi or 231 ft. of water 6

100 (170)

(7 bar or 70 meters) 80
80 P 120 (204)
SI (5
MAXIMUM OPERATING PRESSURE 5
.44 B
ar)
• 100 psi (7 bar)
140 (238)
DISPLACEMENT/STROKE 60
HEAD

4 60 PSI
• 1.0 Gallon / 3.78 liter (4.08 B
ar)
WEIGHTS
3
• Polypropylene 271 lbs (123 kg) 40
• PVDF 208 lbs (94 kg) 40 PSI (2
.72 Bar)
2

20
20 PSI (1.3
1 6 Bar) Air
Inlet Pressu
re

0
0 20 40 60 80 100 120 140 160 180 200 220 240 GPM

0 50 150 250 350 450 550 650 750 850 LPM

CAPACITY

DIMENSIONS
18.80 478
STANDARD ENCAPSULATED DISCHARGE PORT
3" STANDARD 125# FLANGE CONFIGURATION 16.19 411
MUFFLER
1" NPT EXHAUST PORT FOR OPTIONAL .75 [4] HOLES EQUALLY SPACED
5.00 127
MUFFLER STYLES OR PIPING EXHAUST ON A 6.00 [152] BOLT CIRCLE
AIR IN SUBMERGED APPLICATIONS 37.01 940
AIR INLET
3/4 NPT

2X 22.42 569

4X .75 19 2X 6.51 165

40.66 1033

2X 11.00 279

20.25 514
4X 1.00 25 2X 15.00 381 4.94 125

SUCTION PORT 4.85 123 5.00 127

3" STANDARD 125# FLANGE CONFIGURATION
.75 [4] HOLES EQUALLY SPACED
ON A 6.00 [152] BOLT CIRCLE

Warren Rupp, Inc. • A Unit of IDEX Corporation

800 N. Main St., Mansfield, Ohio 44902 USA ISO 9001 Certified
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867 ISO 14001 Certified
EXPLANATION OF PUMP NOMENCLATURE
S
Your Model
#: __ ____ __ __ __ __ __ __ __ __ __ ____
(fill in from
pump nameplate)

Pump Pump Check Design Wetted Diaphragm/ Check Valve

Non-Wetted Porting Pump Pump Kit
Config. Size Valve Level Material Check Valve Seat Material Options Style Options Options

Model #: S XX X X X X X X X X X XX
PUMP BRAND DIAPHRAGM/CHECK VALVE MATERIALS 7 Dual Porting (ANSI)
S SANDPIPER® 3 PTFE Pumping, PTFE - Santoprene, 8 Top Dual Porting (ANSI)
Backup Driver / PTFE 9 Bottom Dual Porting (ANSI)
PUMP SIZE 4 Santoprene Pumping, Santoprene
30 3” Driver / Santoprene PUMP STYLE
6 PTFE Pumping, PTFE-Neoprene Backup Driver/PTFE D with Electronic Leak Detection (110V)
CHECK VALVE TYPE
E with Electronic Leak Detection (220V)
B Ball CHECK VALVE SEAT
M with Mechanical Leak Detection
K PVDF
DESIGN LEVEL V with Visual Leak Detection
P Polypropylene
3 Design Level
PUMP OPTIONS
NON-WETTED MATERIAL OPTIONS
WETTED MATERIAL 0 None
P 40% Glass Filled Polypropylene
K PVDF
1 40% Glass Filled Polypropylene w / PTFE Coated Hardware KIT OPTIONS
P Polypropylene
Porting Options CONSULT FACTORY
A ANSI Flange

MATERIALS
D DIN Flange

Material Profile: Operating

Temperatures:
POLYPROPYLENE: A thermoplastic polymer. Moderate tensile
and flex strength. Resists stong acids and alkali. Attacked by
180°F
82°C
32°F
0°C
CAUTION! Operating temperature limitations are as follows: chlorine, fuming nitric acid and other strong oxidizing agents.
Max. Min.
PVDF: (Polyvinylidene Fluoride) A durable fluoroplastic with 250°F 0°F
CONDUCTIVE ACETAL: Tough, impact resistant, ductile. Good 190°F -20°F
excellent chemical resistance. Excellent for UV applications. 121°C -18°C
abrasion resistance and low friction surface. Generally inert, 88°C -29°C
High tensile strength and impact resistance.
with good chemical resistance except for strong acids and
oxidizing agents. SANTOPRENE®: Injection molded thermoplastic elastomer with 275°F -40°F
no fabric layer. Long mechanical flex life. Excellent abrasion 135°C -40°C
EPDM: Shows very good water and chemical resistance. Has 280°F -40°F
resistance.
poor resistance to oils and solvents, but is fair in ketones and 138°C -40°C
alcohols. UHMW PE: A thermoplastic that is highly resistant to a broad 180°F -35°F
range of chemicals. Exhibits outstanding abrasion and impact 82°C -37°C
FKM (FLUOROCARBON): Shows good resistance to a wide 350°F -40°F
resistance, along with environmental stress-cracking resistance.
range of oils and solvents; especially all aliphatic, aromatic and 177°C -40°C
halogenated hydrocarbons, acids, animal and vegetable oils. URETHANE: Shows good resistance to abrasives. Has poor 150°F 32°F
Hot water or hot aqueous solutions (over 70°F(21°C)) will attack resistance to most solvents and oils. 66°C 0°C
FKM.
VIRGIN PTFE: (PFA/TFE) Chemically inert, virtually impervious. 220°F -35°F
HYTREL®: Good on acids, bases, amines and glycols at room 220°F -20°F Very few chemicals are known to chemically react with PTFE; 104°C -37°C
temperatures only. 104°C -29°C molten alkali metals, turbulent liquid or gaseous fluorine and a few
fluoro-chemicals such as chlorine trifluoride or oxygen difluoride
NEOPRENE: All purpose. Resistance to vegetable oils. Gener- 200°F -10°F
which readily liberate free fluorine at elevated temperatures.
ally not affected by moderate chemicals, fats, greases and 93°C -23°C
many oils and solvents. Generally attacked by strong oxidizing Maximum and Minimum Temperatures are the limits for which these materials can be
acids, ketones, esters and nitro hydrocarbons and chlorinated operated. Temperatures coupled with pressure affect the longevity of diaphragm pump
aromatic hydrocarbons. components. Maximum life should not be expected at the extreme limits of the
temperature ranges.
NITRILE: General purpose, oil-resistant. Shows good solvent, 190°F -10°F
oil, water and hydraulic fluid resistance. Should not be used with
highly polar solvents like acetone and MEK, ozone, chlorinated
88°C -23°C
Metals:
hydrocarbons and nitro hydrocarbons. ALLOY C: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.
NYLON: 6/6 High strength and toughness over a wide tem- 180°F 32°F STAINLESS STEEL: Equal to or exceeding ASTM specification A743 CF-8M for corro-
perature range. Moderate to good resistance to fuels, oils and 82°C 0°C sion resistant iron chromium, iron chromium nickel and nickel based alloy castings for
chemicals. general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
For specific applications, always consult the Chemical Resistance Chart.

5 YEAR LIMITED PRODUCT WARRANTY USE ONLY GENUINE SANDPIPER PARTS

EX
CLUSIVE
5 Year Guarantee for defects in material or workmanship. See All certification, standards, guarantees & warranties
FE
sandpiperpump.com/content/warranty-certifications originally supplied with this pump will be invalidated by the use of
AT U R E
for complete warranty, including terms and conditions, limitations service parts not identified as “Genuine
and exclusions. SANDPIPER Parts.”

Warren Rupp, Inc. • A Unit of IDEX Corporation

800 N. Main St., Mansfield, Ohio 44902 USA
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867 SP_DS_TemplateDataSheet_0817