1 2 3 4 5 6 7 8 9 10

DO NOT SCALE THIRD ANGLE PROJECTION DIMENSIONS IN MILLIMETRES

OPERATING PARAMETERS
A
A
HYDRAULIC TEST AND WORKING PRESSURES

HYDROSTATIC TEST PRESSURE SUPPLY: 570 bar (8265 psi)

HYDROSTATIC TEST PRESSURE PILOT: 570 bar (8265 psi)
HYDROSTATIC TEST PRESSURE RETURN: 120 bar (1740 psi)
DESIGN PRESSURE SUPPLY: 380 bar (5510 psi)
DESIGN PRESSURE PILOT: 380 bar (5510 psi)
50.8

DESIGN PRESSURE RETURN: 80 bar (1160 psi)

MAX WORKING PRESSURE SUPPLY: 345 bar (5000 psi)
MAX WORKING PRESSURE PILOT: 345 bar (5000 psi)
MAX WORKING PRESSURE RETURN: 60bar (870 psi)
B B
MAX RISING PILOT PRESSURE TO OPEN : 175 bar (2538 psi) (@ MAX WP and 0 Return pressure)
MIN FALLING PILOT PRESSURE TO CLOSE: 35 bar (508 psi) (@ MAX WP and 0 Return pressure)
DELATCH (DROPOUT) PRESSURE: 100bar (1450 psi) (With common Pilot and Supply pressure)
WORKING AND STORAGE TEMP

OPERATING TEMP -5 TO +40°C

DESIGN TEMP: -18 TO +40°C
STORAGE TEMP: -18 TO +50°C
FLOW RATE AND LEAKAGE

C LEAK RATE: 6 ml/hr (0.1cc/minute) maximum C

CROSS FLOW LEAKAGE (OPEN STROKE): Block Before Bleed
CROSS FLOW LEAKAGE (CLOSE STROKE): Block Before Bleed

77.6
FLOW P TO A @ 10 bar Dp (1450 psi): 10 l/min (2.64 USgal/min)
FLOW A TO R@ 10 bar Dp (1450 psi): 10 l/min (2.64 USgal/min)

Cv - P TO A: 0.2 (3.5 minimum orifice)

Cv - A TO R: 0.2

15.9
PHYSICAL PROPERTIES
D D
WEIGHT: 3.2kg dry (calcutated)
199.2 EXTERNAL VALVE MATERIALS: 316 STAINLESS STEEL

65.5

10
153.6 63.5 x 18 DEEP
38 4 PLACES

19

7.5
R E
E
O 5.0
P A 4 PLACES PP SCHEMATIC DIAGRAM
A

19
12

P
25.4

l O 0.1
24

38

53
PP R A ALL CENTRES
PP

35.5
R P
118.1 7.5 WITHIN AREA
WITHIN Ø14 0.8 r 0.05 INDICATED
4 PLACES 7.5 BY DIMENSIONS ( ).
F F
15

MANIFOLD MOUNTING DETAILS

NOTES : VALVE TYPES/USED ON Bifold Fluidpower Limited

Greenside way,Middleton, Manchester, M24 ISW
1.) O-RING MATERIAL CODE X - N = NBR FPS10/S1(M16C)/M/32/NO/X/3 Telephone (44) 0161 345 4777 Fax (44) 0161 345 4780

H = HNBR PROJECT TITLE PROJECT NO.

FPS10 SERIES SUBSEA DCV
G 2.) ALL DIMENSIONS NOMINAL UNLESS OTHERWISE STATED. DRAWING TITLE DRAWING NO. REV.
G
FPS10/H1(M16C)/M/32/NO/X/X-INST I0716 0
0 DRAWN DATE CHECKED DATE APPROVED DATE
24.06.13 KRG JRR ISSUED
KRG 24.06.13 JRR 24.06.13 MTD 24.06.13
REV DATE DRAWN CHECKED REVISION Copyright C 2013 BIFOLD FLUIDPOWER LTD. All Rights Reserved C.A.D. Produced Drawing DO NOT Change By Hand
1 2 3 4 5 6 7 8 9 10