9050/51 Series

Filter Assemblies OPTIONAL

DIFFERENTIAL
PRESSURE DEVICES

Flows to 20 gpm (75 L/min)

Pressures to 10,000 psi (690 bar)
Port sizes 3⁄8", 1⁄2", and 3⁄4"
Stainless Steel
Notes and Specifications
Maximum Acceptable 10,000 psi (690 bar)
Working Pressure: 14,500 psi (1000 bar)
FULL FLOW
YA15 version FAST RESPONSE
BYPASS VALVE
Fatigue Pressure Rating: Contact factory
Typical Burst Pressure: 45,000 psi (3100 bar)
58,000 psi (4000 bar)
YA15 version
Temperature Range: Nitrile seals– 45°F to 225°F
(–43°C to 107°C)
Fluorocarbon seals–20°F STAINLESS STEEL
HEAD AND BOWL
to 250°F (–27°C to 121°C) (316 S12 GRADE)
140°F (60°C) maximum in ULTIPOR® III
ELEMENT
HWCF or water-glycol fluids
Dry Weights: R length– 19lbs. (8.7 kg)
S length– 30lbs. (13.5 kg)
Filter Element 9020–290 psid (20 bar)
Collapse Pressure: 9021–3000 psid (207 bar)

Pressure Drop Information

Figure 1. Housing Pressure Drop using Figure 2. Bypass Valve Pressure Drop Element Pressure Drop Factor.
fluid with 0.9 S.G. Housing Pressure drop using fluid with 0.9 S.G. Bypass valve Multiply actual flow rate times factor to
is directly proportional to specific gravity. pressure drops are directly proportional determine pressure drop with fluid at 150
to specific gravity. SUS (32 cSt), 0.9 S.G. Correct for other
viscosities by multiplying new viscosity in SUS/150 x new
S.G/0.9. FLOW (L/MIN) FLOW (L/MIN)
25 50 25 50
25 100
-1.5 -6 9020 Series Element ∆P factor (psid/gpm)
06 08
20 80 Length KZ KP KN KS KT
12
-1.0 60 -4
4" 1.90 0.82 0.54 0.35 0.21
∆P(PSID)

∆P(PSID)

15
∆P(BAR)

∆P(BAR)

8" 0.96 0.41 0.27 0.18 0.11

10 40
-0.5 -2
9021 Series Element ∆P factor (psid/gpm)
5 20
Length DP DT
-0 -0 4" 2.71 0.68
0 5 10 15 20 0 5 10 15 20
FLOW (GPM) FLOW (GPM) 18" 1.35 0.34

68
 Dimensional Drawings STANDARD HEAD “K” OPTION HEAD
1.10 IN. 1.10 IN. 4 CLEARANCE HOLES .512 IN. DIA. (13 MM)
28 MM 28 MM FOR CAP SCREWS - ON A 4.9 IN. DIA.
.5 IN. (12MM) CIRCLE PATTERN (124.5MM)

.98 IN. .79 IN. 30° 30°

OUTLET
25 MM

INLET
20 MM

OUTLET
INLET
3.86 IN.
.98 IN. .79 IN. 98 MM
25 MM 20 MM

30° 30°

DIFFERENTIAL
PRESSURE DEVICES
4.02 IN.
102 MM
MANIFOLD SEALS
SUPPLIED WITH
1.00 IN. ASSEMBLY
FOR “H” 25.4 MM
DIMENSION
SEE INDICATOR 5.71 IN.
SECTION 145 MM
4.09 IN.
104 MM

.63 IN.
PORT C/L 16 MM

4.47 IN. 4.09 IN.

113.5 MM 3.46 IN. 104 MM 3.35 IN.
88 MM 85 MM

10,000 PSI/20 GPM

9050/51 SERIES
R 7.95 IN. 202 MM MAX. R 7.95 IN. 202 MM MAX.
S 11.73 IN. 298 MM MAX. S 11.73 IN. 298 MM MAX.

3.15 IN. DIA.

3 IN. (75 MM) MIN. 80 MM
BOWL TO BE 1 3/16 IN. HEX CLEARANCE REQUIRED
TORQUED TO 39.8 FT. LBS. 30 MM FOR ELEMENT CHANGE

Ordering Information
Assembly P/N: H 905
TABLE 1 TABLE 2 TABLE 3 TABLE 4 TABLE 5 TABLE 6 TABLE 7 TABLE 8 TABLE 9

Element P/N: HC 902 F

TABLE 2 TABLE 5 TABLE 6 TABLE 1

Table 1. Seal Options Table 2. Element Options Table 3. Port Style Options Table 4. Port Size Options
Code Seals Code Rating Code Port Style Code Size Style Availability
H Nitrile 0 290 psid A* SAE J514 straight thread 06 3
⁄8" B,V
Z Fluorocarbon 1 3000 psid B* NPT 18 1
⁄2" A,B,K
V Autoclave type 12 3
⁄4" A,B
K Manifold mount
* Not available for 1000 bar variant.

Table 5. Filter Element Options Table 6. Length Options* Table 7. Bypass Valve Options Table 8. Differential Pressure Device Options
Code βx≥200 βx(c)=1000 Assembly Element Code Description Code Description
Code Code**
B 50 psid bypass 0 Unmachined indicator port
KZ <1 2.5 R 4
W Non bypass BH Plug in place of indicator
KP 3 5 S 8
PH Visual indicator with thermal lockout
KN 6 7 * Use code in second column
for element part no. E Visual indicator with no thermal
KS 12 12 lockout
** Nominal length in inches
KT 25 22 LH Electrical switch (SPDT) with 6" leads
DP* 3 5 Table 9. High Pressure Options
TH Electrical switch with DIN connector
DT* 17 15 Code Description
MH ‘TH’ type switch with matching wiring
*9051 only. YA 15 14,500 psi max. cap
See page 17 for filter specifications. pressure
QH Waterproof SPDT switch
See page 140.

FOR TECHNICAL ASSISTANCE CALL TOLL FREE 1-888-333-PALL (7255) ©Copyright 1998, 2000, Pall Corporation. All rights reserved. 69