Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    AL Curves

    Uploaded by

    Azifah
    This document provides information about AL series positive displacement pumps, including specifications for models AL05 and AL10. It lists performance details such as pressure rating, port size, displacement, operating RPM range and temperature range. Graphs show pump capacity and power curves in relation to viscosity and RPM. A formula is provided for calculating total power requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AL Curves

    Uploaded by

    Azifah
    13 views10 pages
    This document provides information about AL series positive displacement pumps, including specifications for models AL05 and AL10. It lists performance details such as pressure rating, port size, displacement, operating RPM range and temperature range. Graphs show pump capacity and power curves in relation to viscosity and RPM. A formula is provided for calculating total power requirements.

    Original Title

    AL-Curves

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about AL series positive displacement pumps, including specifications for models AL05 and AL10. It lists performance details such as pressure rating, port size, displacement, operating RPM range and temperature range. Graphs show pump capacity and power curves in relation to viscosity and RPM. A formula is provided for calculating total power requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views10 pages

    AL Curves

    Uploaded by

    Azifah
    This document provides information about AL series positive displacement pumps, including specifications for models AL05 and AL10. It lists performance details such as pressure rating, port size, displacement, operating RPM range and temperature range. Graphs show pump capacity and power curves in relation to viscosity and RPM. A formula is provided for calculating total power requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 10

    AL Series Positive Displacement Pumps

    L/MIN
    Ampco
    GPM RPM
    5
    0 100 200 300 400 500 600 700 800 900 900 AL Series
    16
    Max. Pressure Rating= 290 psi (Viscous Liquids) Model: AL05
    Please contact Ampco for assistance in sizing the
    4 AL05 pump on viscous liquids Standard Clearances
    CAPACITY

    12 3
    Standard Port Size = 1.0”
    Displacement =
    No Slip Curve 0.005 Gal/Rev
    8 2 (300 CPS and up)
    (0.019 L/Rev)

    4 1

    Operating Specifications:
    0 0
    • 0-1000 RPM Range
    Viscosity Correction Factor (v) • 290 PSI (20 bar) Max.
    20
    Pressure
    • Temperature Range
    15 -40 oF (-40oC) to
    Correction Factor

    250 oF (121oC)

    10

    Subject to change without notice


    5

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP)
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c
    Performance ratings are based on stand-
    (Metric units) Total Power (Kw) = (2x p + v)xnx c ard clearance rotors and single mechani-
    1000 cal seals. Contact manufacturer for rat-
    ings of other seal and rotor configurations
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph)
    n = speed (RPM)
    c = displacement (G/rev. or L/rev from table below)
    AL Series Model 05
    C (G/rev) .005
    C (L/rev) .020

    Ampco Pumps Company

    2045 West Mill Road


    Glendale, WI 53209 USA
    Phone: (800) 737-8671
    (414) 643-1852
    Website:
    www.ampcopumps.com
    AL Series Positive Displacement Pumps
    L/MIN

    GPM RPM
    0 100 200 300 400 500 600 700 800 900
    30 8
    7
    25 Max. Pressure Rating= 290 psi (Viscous Liquids)
    CAPACITY

    6
    20 5

    15 4
    3
    10

    5
    2
    Ampco
    1
    AL Series
    0 0
    0.0 .0 Model: AL10
    Standard Clearances
    .13 Standard Port Size = 1.0”
    0.25 Displacement =
    .25 0.0085 Gal/Rev
    (0.033 L/Rev)

    WKW
    WHP

    0.50 .38

    .50
    0.75 Operating Specifications:
    .63 • 0-1000 RPM Range
    • 290 PSI (20 bar) Max.
    1.00 .75 Pressure
    0 100 200 300 400 500 600 700 800 900 1000
    RPM • Temperature Range
    -40 oF (-40oC) to
    Viscosity Correction Factor (v) 250 oF (121oC)
    20

    15
    Correction Factor

    Subject to change without notice

    10

    Performance ratings are based on


    5 standard clearance rotors and single
    mechanical seals. Contact manufacturer
    for ratings of other seal and rotor config-
    urations

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP)
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c
    (Metric units) Total Power (Kw) = (2x p + v)xnx c
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph) Ampco Pumps Company
    n = speed (RPM)
    c = displacement (G/rev. or L/rev from table below) 2045 West Mill Road
    Glendale, WI 53209 USA
    AL Series Model 10 Phone: (800) 737-8671
    (414) 643-1852
    C (G/rev) .0085 Website:
    www.ampcopumps.com
    C (L/rev) .033
    AL Series Positive Displacement Pumps
    L/MIN

    GPM
    RPM
    0 100 200 300 400 500 600 700
    20
    70 18
    60 16
    CAPACITY

    Max. Pressure Rating= 175 psi (Viscous Liquids)


    50 14
    12
    40 10
    30 8
    6
    20
    4
    10 2 Ampco
    0 0
    0.0 .0
    AL Series
    Model: AL15
    0.50
    .50 Standard Clearances
    Standard Port Size = 1.5”
    1.00
    Displacement =
    1.00 0.025 Gal/Rev

    WKW
    WHP

    1.50 (0.095 L/Rev)

    2.00 1.50

    2.50 Operating Specifications:


    2.00
    • 0-800 RPM Range
    3.00 • 175 PSI (12.07 bar) Max.
    0 100 200 300 400 500 600 700 800
    RPM Pressure
    • Temperature Range
    Viscosity Correction Factor (v) -40 oF (-40oC) to
    20
    250 oF (121oC)

    15
    Correction Factor

    Subject to change without notice


    10

    Performance ratings are based on stand-


    5 ard clearance rotors and single mechani-
    cal seals. Contact manufacturer for rat-
    ings of other seal and rotor configurations

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP)
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c
    (Metric units) Total Power (Kw) = (2x p + v)xnx c
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph) Ampco Pumps Company
    n = speed (RPM)
    c = displacement (G/rev. or L/rev from table below) 2045 West Mill Road
    Glendale, WI 53209 USA
    AL Series Model 15 Phone: (800) 737-8671
    (414) 643-1852
    C (G/rev) .025 Website:
    www.ampcopumps.com
    C (L/rev) .095
    AL Series Positive Displacement Pumps
    L/MIN

    GPM
    RPM
    0 100 200 300 400 500 600 700
    40
    140
    35
    120 Max. Pressure Rating= 115 psi
    30
    100 25
    CAPACITY

    80 20
    60 15
    Ampco
    40 10
    20 5
    AL Series
    0 0
    Model: AL20
    0.0 .0 Standard Clearances
    .25 Standard Port Size = 2.0”
    0.50 Displacement =
    .50 0.050 Gal/Rev
    1.00 .75 (0.190 L/Rev)

    WKW
    1.00
    WHP

    1.50
    1.25
    2.00 1.50
    1.75
    2.50
    2.00
    3.00 2.25
    0 100 200 300 400 500 600 700 800
    RPM Operating Specifications:
    • 0-800 RPM Range
    Viscosity Correction Factor (v)
    20 • 115 PSI (7.93 bar) Max.
    Pressure
    • Temperature Range
    15 -40 oF (-40oC) to
    Correction Factor

    250 oF (121oC)

    10

    Subject to change without notice


    5

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP) Performance ratings are based on
    standard clearance rotors and single
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c mechanical seals. Contact manufacturer
    for ratings of other seal and rotor config-
    urations
    (Metric units) Total Power (Kw) = (2x p + v)xnx c
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph) Ampco Pumps Company
    n = speed (RPM)
    c = displacement (G/rev. or L/rev from table below) 2045 West Mill Road
    Glendale, WI 53209 USA
    AL Series Model 20 Phone: (800) 737-8671
    (414) 643-1852
    C (G/rev) .050 Website:
    www.ampcopumps.com
    C (L/rev) .190
    AL Series Positive Displacement Pumps
    L/MIN RPM
    GPM
    0 100 200 300 400 500 600
    300 80

    70
    250
    Max. Pressure Rating= 175 psi
    60
    200
    50
    CAPACITY

    150 40

    30
    Ampco
    100
    20
    AL Series
    50
    10
    175 PSI (12.07 BAR) Model: AL22
    145 PSI (10 BAR)
    0 0 Standard Clearances
    0 .0 Standard Port Size = 2.0”
    Displacement =
    0.106 Gal/Rev
    2.0
    2 (0.401 L/Rev)
    4.0

    WKW
    WHP

    4
    6.0

    6 8.0

    10.0
    8
    0 100 200 300 400 500 600 700 Operating Specifications:
    RPM
    • 0-700 RPM Range
    Viscosity Correction Factor (v) • 175 PSI (12.07 bar) Max.
    20
    Pressure
    • Temperature Range
    15 -40 oF (-40oC) to
    Correction Factor

    250 oF (121oC)

    10

    Subject to change without notice


    5

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP) Performance ratings are based on stand-
    ard clearance rotors and single mechani-
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c cal seals. Contact manufacturer for ratings
    of other seal and rotor configurations
    (Metric units) Total Power (Kw) = (2x p + v)x nx c
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph)
    Ampco Pumps Company
    n = speed (RPM)
    c = displacement (G/rev. or L/rev from table below) 2045 West Mill Road
    Glendale, WI 53209 USA
    AL Series Model 22 Phone: (800) 737-8671
    C (G/rev) .106 (414) 643-1852
    Website:
    C (L/rev) .401 www.ampcopumps.com
    AL Series Positive Displacement Pumps
    L/MIN
    RPM
    GPM
    0 100 200 300 400 500 600
    450 120

    400
    100
    350
    Max. Pressure Rating= 115 psi
    300 80
    CAPACITY

    250
    60
    200
    115 PSI (7.93 BAR)
    Ampco
    150 40
    90 PSI (6.21 BAR) AL Series
    Model: AL25
    100 60 PSI (4.14 BAR)
    20
    50
    0 0 Standard Clearances
    0 .0 Standard Port Size = 2.5”
    Displacement =
    2 0.164 Gal/Rev
    2.0
    (0.621 L/Rev)
    4
    4.0
    6

    WKW
    WHP

    8 6.0

    10
    8.0
    12
    10.0
    14
    0 100 200 300 400 500 600 700
    RPM Operating Specifications:
    Viscosity Correction Factor (v) • 0-700 RPM Range
    20
    • 115 PSI (7.93 bar) Max.
    Pressure
    15 • Temperature Range
    Correction Factor

    -40 oF (-40oC) to
    250 oF (121oC)
    10

    5 Subject to change without notice

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP)
    Performance ratings are based on stand-
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c ard clearance rotors and single mechani-
    cal seals. Contact manufacturer for
    ratings of other seal and rotor configura-
    (Metric units) Total Power (Kw) = (2x p + v)x nx c tions
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph)
    Ampco Pumps Company
    n = speed (RPM)
    c = displacement (G/rev. or L/rev from table below) 2045 West Mill Road
    Glendale, WI 53209 USA
    AL Series Model 25 Phone: (800) 737-8671
    C (G/rev) .164 (414) 643-1852
    Website:
    C (L/rev) .621 www.ampcopumps.com
    AL Series Positive Displacement Pumps
    L/MIN
    RPM
    GPM
    0 100 200 300 400 500
    600 160

    140
    500
    120 Max. Pressure Rating= 175 psi

    400
    100
    CAPACITY

    300 80

    60
    Ampco
    200
    40
    175 PSI (12.07 BAR) AL Series
    Model: AL33
    145 PSI (10 BAR)
    100 115 PSI (7.93 BAR)
    20
    90 PSI (6.21 BAR)
    60 PSI (4.14 BAR)
    0 0 Standard Clearances
    0
    15 PSI (1.03BAR)
    .0 Standard Port Size = 3.0”
    Displacement =
    2
    2.0 0.269 Gal/Rev
    4 (1.018 L/Rev)
    6 4.0

    WKW
    8 6.0
    WHP

    10
    8.0
    12
    10.0
    14
    16 12.0
    18
    0 100 200 300 400 500 600
    RPM Operating Specifications:
    Viscosity Correction Factor (v) • 0-600 RPM Range
    20
    • 175 PSI (12.07 bar) Max.
    Pressure
    15 • Temperature Range
    Correction Factor

    -40 oF (-40oC) to
    250 oF (121oC)
    10

    5 Subject to change without notice

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP)
    Performance ratings are based on stand-
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c ard clearance rotors and single mechanical
    seals. Contact manufacturer for ratings of
    other seal and rotor configurations
    (Metric units) Total Power (Kw) = (2x p + v)x nx c
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph)
    Ampco Pumps Company
    n = speed (RPM)
    c = displacement (G/rev. or L/rev from table below) 2045 West Mill Road
    Glendale, WI 53209 USA
    AL Series Model 33 Phone: (800) 737-8671
    C (G/rev) .269 (414) 643-1852
    Website:
    C (L/rev) 1.018 www.ampcopumps.com
    AL Series Positive Displacement Pumps
    L/MIN
    RPM
    GPM
    0 100 200 300 400 500
    250
    900
    800
    200
    700 Max. Pressure Rating= 115 psi
    600
    CAPACITY

    150
    500
    400 100 Ampco
    300 AL Series
    200
    100
    50
    Model: AL34
    0 0 Standard Clearances
    0 .0 Standard Port Size = 4.0”
    Displacement =
    2 0.380 Gal/Rev
    2.0
    4 (1.438 L/Rev)
    4.0
    6

    WKW
    WHP

    8 6.0

    10
    8.0
    12
    10.0
    14
    16 12.0
    0 100 200 300 400 500 600
    RPM Operating Specifications:
    Viscosity Correction Factor (v) • 0-600 RPM Range
    20
    • 115 PSI (7.93 bar) Max.
    Pressure
    15 • Temperature Range
    Correction Factor

    -40 oF (-40oC) to
    250 oF (121oC)
    10

    5 Subject to change without notice

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP)
    Performance ratings are based on
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c standard clearance rotors and single
    mechanical seals. Contact manufacturer
    for ratings of other seal and rotor config-
    (Metric units) Total Power (Kw) = (2x p + v)x nx c urations
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph)
    Ampco Pumps Company
    n = speed (RPM)
    c = displacement (G/rev. or L/rev from table below) 2045 West Mill Road
    Glendale, WI 53209 USA
    AL Series Model 34 Phone: (800) 737-8671
    C (G/rev) .380 (414) 643-1852
    Website:
    C (L/rev) 1.438 www.ampcopumps.com
    AL Series Positive Displacement Pumps

    Ampco
    AL Series
    Model: AL44

    Standard Clearances
    Standard Port Size = 4.0”
    Displacement =
    Viscosity Correction Factor (v) 0.60 Gal/Rev
    20 (2.27 L/Rev)

    15
    Correction Factor

    Operating Specifications:
    10 • 0-500 RPM Range
    • 175 PSI (12.07 bar) Max.
    Pressure
    5 • Temperature Range
    -40 oF (-40oC) to
    250 oF (121oC)
    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP)

    Subject to change without notice

    Performance ratings are based on stand-


    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c ard clearance rotors and single mechani-
    cal seals. Contact manufacturer for ratings
    of other seal and rotor configurations
    (Metric units) Total Power (Kw) = (2x p + v)xnx c
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph)
    n = speed (RPM) Ampco Pumps Company
    c = displacement (G/rev. or L/rev from table below)
    2045 West Mill Road
    AL Series Model 44 Glendale, WI 53209 USA
    Phone: (800) 737-8671
    C (G/rev) .60 (414) 643-1852
    Website:
    C (L/rev) 2.27 www.ampcopumps.com
    AL Series Positive Displacement Pumps

    Ampco
    AL Series
    Model: AL46

    Standard Clearances
    Standard Port Size = 6.0”
    Displacement =
    0.88 Gal/Rev
    (3.34 L/Rev)

    Viscosity Correction Factor (v) Operating Specifications:


    20
    • 0-500 RPM Range
    • 115 PSI (7.93 bar) Max.
    15 Pressure
    Correction Factor

    • Temperature Range
    -40 oF (-40oC) to
    10 250 oF (121oC)

    5
    Subject to change without notice

    0
    0 10 100 1,000 10,000 100,000
    Viscosity (cP)
    Performance ratings are based on
    (English units) Total Power (HP) = (.0007x p + .0051x v) xnx c standard clearance rotors and single
    mechanical seals. Contact manufacturer
    for ratings of other seal and rotor config-
    (Metric units) Total Power (Kw) = (2x p + v)xnx c urations
    1000
    Where: p = pressure (psi or bar)
    v = viscosity correction factor (from graph)
    n = speed (RPM) Ampco Pumps Company
    c = displacement (G/rev. or L/rev from table below)
    2045 West Mill Road
    AL Series Model 46 Glendale, WI 53209 USA
    Phone: (800) 737-8671
    C (G/rev) .88 (414) 643-1852
    Website:
    C (L/rev) 3.34 www.ampcopumps.com

    You might also like