Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 148 views

    Sensor Caudal

    Uploaded by

    jcudris
    This document describes the IR-Opflow precision flowmeter manufactured by JLC International. It uses a patented rotor design in a corrosion-resistant PVDF body to precisely measure volumetric flow. As liquid flows through, it turns the rotor which interrupts an infrared beam to generate pulses proportional to flow. Accuracy is ±1-3% and repeatability is ±0.1%. It is available in six sizes from 0.1-120 lpm with optional cartridge or integrated filter models.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Sensor Caudal

    Uploaded by

    jcudris
    148 views3 pages
    This document describes the IR-Opflow precision flowmeter manufactured by JLC International. It uses a patented rotor design in a corrosion-resistant PVDF body to precisely measure volumetric flow. As liquid flows through, it turns the rotor which interrupts an infrared beam to generate pulses proportional to flow. Accuracy is ±1-3% and repeatability is ±0.1%. It is available in six sizes from 0.1-120 lpm with optional cartridge or integrated filter models.

    Original Title

    sensor caudal

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the IR-Opflow precision flowmeter manufactured by JLC International. It uses a patented rotor design in a corrosion-resistant PVDF body to precisely measure volumetric flow. As liquid flows through, it turns the rotor which interrupts an infrared beam to generate pulses proportional to flow. Accuracy is ±1-3% and repeatability is ±0.1%. It is available in six sizes from 0.1-120 lpm with optional cartridge or integrated filter models.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    148 views3 pages

    Sensor Caudal

    Uploaded by

    jcudris
    This document describes the IR-Opflow precision flowmeter manufactured by JLC International. It uses a patented rotor design in a corrosion-resistant PVDF body to precisely measure volumetric flow. As liquid flows through, it turns the rotor which interrupts an infrared beam to generate pulses proportional to flow. Accuracy is ±1-3% and repeatability is ±0.1%. It is available in six sizes from 0.1-120 lpm with optional cartridge or integrated filter models.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Innovations in instrumentation for control, test and measurement

    IR-Opflow PVDF Precision Flowmeters

    Corrosion resistant flow sensor


    Manufactured in PVDF (polyvinylidene fluoride) the
    IR-Opflow Sensor is a precise volumetric flow meter.
    Incoming liquid is forced into a twisting motion by
    spiral surfaces molded into the inflow section. This
    causes a miniature rotor to turn, virtually friction
    free. Each time the rotor spins, the blade interrupts a
    beam of infrared light generating a series of pulses
    that can be measured.
    The precision of the IR-Opflow is not influenced
    by either the pressure or volume variations.
    The patented rotor design prevents air or gas bub-
    bles from becoming trapped in the flowtube,
    making the IR-Opflow flowsensor not only rugged but
    extremely accurate.

    Typical features: Technical Specifications:


    • Manufactured in PVDF (polyvinylidene fluoride) Accuracy: 10 Series ±1% of meas. value
    • Measuring range: 0.1-120 l/min. through six sizes 30 Series ±3% of meas. . value
    • Threaded or Hose Barb connections Repeatability ±0.1% of measured value
    • Accuracy: ±1% or ±3% of measured value Flow range: See specifications
    • Repeatability: ±0.1% of measured value Temperature range: -40 to 85˚C (-40° to 185° F)
    • Square wave Vdc frequency output Maximum pressure: 150 psi
    • Patented design and lightweight rotor minimizes Process connection: NPT, BSP or flexible hose
    wear, provides friction free rotational movement fitting, see table 1 and 2
    • Mountable in any position Materials: All wetted parts PVDF

    Electrical Specifications:
    Specifications:
    Power supply: 5 - 12 Vdc, 6 - 24 mA
    Type Flow range K-factor<5cSt Output 8 - 24 Vdc, 18 - 30 mA
    lpm (gpm) pulses/l Hz Pulse output: Push-Pull
    1 0.1-2.0 (0.03-0.53) 36,000 60-1200 Max. load: 2k2 Ohm
    2 0.3-9.0 (0.08-2.38) 8,000 40-1200 Frequency: 15-1,200 Hz , see specifications
    3 0.5-15.0 (0.13-3.96) 3,200 26.66-800 Signal cable: 3 feet, other lengths on request
    4 1.0-30.0 (0.26-7.93) 1,200 20-600
    Signal source: Opto-electronic (infrared)
    5 2.5-75.0 (0.66-19.8) 450 18.75-562
    6 4.0-120.0 (1.06-32.0) 225 15-450

    JLC International Phone: 800 599 4732 www.jlcinternational.com


    948 Lenape Drive Town Center 215 340 2650
    New Britain, PA 18901 Fax: 215 340 3670 jlcusa@jlcinternational.com
    Optional cartridge model features
    • Turbine meter accuracy with convenience of non-
    intrusive unit for cleaning
    • Rotor assembly removable for cleaning
    or replacement of flow tube
    • Patented design with ±1% or ±3% accuracy
    • Accuracy guaranteed when replacing cartridge
    • Electronics unaffected by replacement

    Cartridge specifications:
    Accuracy: 10 Series ±1% of meas. value
    30 Series ±3% of meas. value
    Repeatability: ±0.1% of measured value
    Flow range: Type 1, 2 and 3
    Temperature range: -40 to 85°C (-40 to 185°F)
    Maximum pressure: 150 psi
    Process connection: Flexible hose fitting, (o.d. 9mm)
    Materials: All wetted parts are PVDF

    Electrical specifications:
    Power supply: 5 - 12 Vdc, 6 - 24 mA
    Pulse output: Push-Pull
    Max. load: 2k2 ohms
    Frequency: 26.66 - 1,200 Hz, see specifications

    Table 1 Table 2
    NPT or BSP Dimensions (mm) Flexible hose fittings Dimensions (mm)
    Type A D d L Type A D E F G H I Tot L.
    1 9.5 1/4" 6.5 39 1 9.0 M12x1.5 8.7 1.5 6.5 6.9 39 96
    2 12.7 1/2" 13.0 47 2 12.0 M20x2 16.0 1.8 12.0 9.0 43 112
    3 12.7 1/2" 13.0 47 3 12.0 M20x2 16.0 1.8 12.0 12.0 43 116
    4 18.5 3/4" 17.0 63 4 16.0 M27x2 21.0 2.3 16.0 16.0 57 136
    5 24.5 1 1/4" 29.0 80 5 16.5 BSP 1”pl. 29.4 1.6 24.5 19.5 80 182
    6 24.5 1 1/4" 29.0 80 6 16.5 BSP 1”pl. 29.4 1.6 24.5 24.5 80 183

    JLC International Phone: 800 599 4732 www.jlcinternational.com


    948 Lenape Drive Town Center 215 340 2650
    New Britain, PA 18901 Fax: 215 340 3670 jlcusa@jlcinternational.com
    IR-Opflow Filters Ordering information
    Type 2-3 IR-Opflow XX X X X X
    Accuracy
    10 = ±1% of measured value
    30 = ±3% of measured value
    ~115 Output signal
    0 = square wave pulse
    5 = sinusoidal pulse
    Type 1

    Type
    1 = 0.1 - 2.0 lpm (0.03 - 0.53 gpm) *)
    2 = 0.3 - 9.0 lpm (0.08 - 2.38 gpm) *)
    70 3 = 0.5 - 15.0 lpm (0.13 - 3.96 gpm) *)
    ~130
    4 = 1.0 - 30.0 lpm (0.26 - 7.93 gpm)
    5 = 2.5 - 75.0 lpm (0.66 - 19.8 gpm)
    Technical specifications: 6 = 4.0 - 120.0 lpm (1.06 - 32.0 gpm)

    Connections: Filter 1 (A) M12 x 1.5 F (fits


    flowmeter type 1) Supply voltage
    and flexible hose fitting; 0 = 5 - 12 Vdc, 6 - 24 mA
    (B) Flexible hose fitting 1 = 8 - 24 Vdc, 18 - 30 mA
    on both sides
    Filter 2/3 Flexible hose fitting on Process connection
    both sides
    Mesh width: 100 Micron N = NPT
    Pressure drop filter: See graph H = Flexible hose fitting
    Filter housing material: PVDF B = BSP
    Filter material: PFA S = Metric Thread
    'O'- ring material: Viton *) Available in cartridge design, "H" only
    Examples:
    100.10H
    p.m. bar ±1%, square wave, type 1, 5 - 12 Vdc, Hose barbs
    150
    300.41N
    ±3%, square wave, type 4, 8 - 24 Vdc, NPT
    100

    50
    Pressure Loss Curve

    1 2 3 4 5 6 7 8 9 10

    JLC International Phone: 800 599 4732 www.jlcinternational.com


    948 Lenape Drive Town Center 215 340 2650
    New Britain, PA 18901 Fax: 215 340 3670 jlcusa@jlcinternational.com

    You might also like