Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 205 views

    AMM Assignment 2

    Uploaded by

    Rino Nelson
    The document contains 8 problems related to mechanics of materials. Problem 1 asks to determine stress values for a given state of stress. Problem 2 asks to find maximum shearing stress in a cylindrical boiler plate. Problem 3 asks to check stresses in a dam wall satisfy equilibrium equations. Problem 4 asks to find principal shears for a given state of stress. Problem 5 asks to find stresses at a point on a shaft under tension and torque. Problems 6-8 ask to determine strain and displacement values from given information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AMM Assignment 2

    Uploaded by

    Rino Nelson
    205 views2 pages
    The document contains 8 problems related to mechanics of materials. Problem 1 asks to determine stress values for a given state of stress. Problem 2 asks to find maximum shearing stress in a cylindrical boiler plate. Problem 3 asks to check stresses in a dam wall satisfy equilibrium equations. Problem 4 asks to find principal shears for a given state of stress. Problem 5 asks to find stresses at a point on a shaft under tension and torque. Problems 6-8 ask to determine strain and displacement values from given information.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains 8 problems related to mechanics of materials. Problem 1 asks to determine stress values for a given state of stress. Problem 2 asks to find maximum shearing stress in a cylindrical boiler plate. Problem 3 asks to check stresses in a dam wall satisfy equilibrium equations. Problem 4 asks to find principal shears for a given state of stress. Problem 5 asks to find stresses at a point on a shaft under tension and torque. Problems 6-8 ask to determine strain and displacement values from given information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    205 views2 pages

    AMM Assignment 2

    Uploaded by

    Rino Nelson
    The document contains 8 problems related to mechanics of materials. Problem 1 asks to determine stress values for a given state of stress. Problem 2 asks to find maximum shearing stress in a cylindrical boiler plate. Problem 3 asks to check stresses in a dam wall satisfy equilibrium equations. Problem 4 asks to find principal shears for a given state of stress. Problem 5 asks to find stresses at a point on a shaft under tension and torque. Problems 6-8 ask to determine strain and displacement values from given information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Indian Institute of Technology Design and Manufacturing, Kancheepuram

    Course Name: Advanced Mechanics of Materials Course No: MEC521T

    Assignment – 2

    Due Date: 17.02.2021

    1. The state of stress at a point is characterized by the components


    σx=100MPa, σy= -40MPa, σz=80MPa and τxy= τyz= τzx=0
    Determine the extremum values of the shear stress, their associated normal stress,
    octahedral shear stress and its associated normal stress.
    2. A cylindrical boiler, 180 cm in diameter is made of plates 1.8 cm thick and is subjected to
    an internal pressure 1400 kPa. Determine the maximum shearing stress in the plate at point
    P and the plane on which it acts.

    3. The corss section of the wall of a dam is shown in Figure. The pressure of water on face
    OB is also shown. With the axes Ox and Oy, the stress at any point (x,y) are given by
    (γ=specific weight of water and ρ=specific weight of dam material)
    𝜌 2𝛾 𝛾 𝛾
    σx=-γy, σy= − 𝑥+ − 𝜌𝑦, σz=0 and τxy= τyx= − 𝑥
    𝑡𝑎𝑛𝛽 𝑡𝑎𝑛3 𝛽 𝑡𝑎𝑛2 𝛽 𝑡𝑎𝑛2 𝛽
    τzx= τyz =0

    Check if these stress components satisfy the differential equations of equilibrium. Also
    verify if the boundary conditions are satisfied on face OB.

    4. The state of stress at a point P is characterized by the components


    σx=12.31 MPa, σy= 8.96MPa, σz= 4.34 MPa and
    τxy= 4.20 MPa, τyz= 5.27 MPa, τzx=0.84 MPa
    Find the values of the principal shears and the associated normal stresses.
    Indian Institute of Technology Design and Manufacturing, Kancheepuram

    Course Name: Advanced Mechanics of Materials Course No: MEC521T

    5. A solid shaft of diameter d=√10 cm is subjected to a tensile force P = 10,000 N and a


    torque, T = 5000 Ncm. At a point A on the surface, determine the principal stresses, the
    octahedral shearing stress and the max. shearing stress.

    6. Consider the displacement field

    u= [y2i+3yzj+(4+6x2)k]10-2

    What are the rectangular strain components at the point (1,2,0)?

    7. The displacement field of a body is given by


    u= [(x2+y)i+(3+z)j+(x2+2y)k]10-6

    Determine the principal strains at (3, 1, -2) and the direction of the minimum principal
    strain.

    8. Given the following system of strains for 2D case


    εxx=5+x2+y2+x4+y4
    εyy=6+3x2+3y2+x4+y4
    γxy=10+4xy(x2+y2+2)

    Determine whether the above strain field is possible. If it is possible, determine the
    displacement components in terms of x and y, assuming that u=v at the origin.

    You might also like