Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Drilled Holes Poster

    Uploaded by

    Raneesh Mohamed
    This document provides guidelines for drilling holes in hollow metal profiles prior to hot dip galvanizing. It lists the minimum diameter holes allowed for different profile sizes and numbers of holes to ensure proper zinc flow and coating. For profiles longer than 10 meters or with dimensions not listed, consulting with Rotocoat is necessary to determine hole placement and numbers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Drilled Holes Poster

    Uploaded by

    Raneesh Mohamed
    29 views1 page
    This document provides guidelines for drilling holes in hollow metal profiles prior to hot dip galvanizing. It lists the minimum diameter holes allowed for different profile sizes and numbers of holes to ensure proper zinc flow and coating. For profiles longer than 10 meters or with dimensions not listed, consulting with Rotocoat is necessary to determine hole placement and numbers.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides guidelines for drilling holes in hollow metal profiles prior to hot dip galvanizing. It lists the minimum diameter holes allowed for different profile sizes and numbers of holes to ensure proper zinc flow and coating. For profiles longer than 10 meters or with dimensions not listed, consulting with Rotocoat is necessary to determine hole placement and numbers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    29 views1 page

    Drilled Holes Poster

    Uploaded by

    Raneesh Mohamed
    This document provides guidelines for drilling holes in hollow metal profiles prior to hot dip galvanizing. It lists the minimum diameter holes allowed for different profile sizes and numbers of holes to ensure proper zinc flow and coating. For profiles longer than 10 meters or with dimensions not listed, consulting with Rotocoat is necessary to determine hole placement and numbers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Hot dip galvanising

    DRILLING HOLES F O R Q UA L I T Y A N D S A F E T Y

    Hollow profile dimensions Smallest diameter ø for stated number of holes: Internal diameter ø for stated number of holes:

    1 2 4 1 2 4
    < 15 mm < 15 mm < 20 x 10 mm ø 8 mm ø 14 mm
    < 20 mm < 20 mm < 30 x 15 mm ø 8 mm ø 16 mm
    < 30 mm < 30 mm < 40 x 20 mm ø 12 mm ø 10 mm ø 25 mm
    < 40 mm < 40 mm < 50 x 30 mm ø 14 mm ø 12 mm ø 30 mm
    < 50 mm < 50 mm < 60 x 40 mm ø 16 mm ø 12 mm ø 10 mm ø 40 mm ø 25 mm
    < 60 mm < 60 mm < 80 x 40 mm ø 20 mm ø 12 mm ø 10 mm ø 40 mm ø 25 mm
    < 80 mm < 80 mm < 100 x 60 mm ø 20 mm ø 16 mm ø 12 mm ø 40 mm ø 35 mm ø 25 mm
    < 100 mm < 100 mm < 120 x 80 mm ø 25 mm ø 20 mm ø 12 mm ø 50 mm ø 40 mm ø 25 mm
    < 120 mm < 120 mm < 160 x 80 mm ø 30 mm ø 25 mm ø 20 mm ø 60 mm ø 50 mm ø 40 mm
    < 160 mm < 160 mm < 200 x 120 mm ø 40 mm ø 25 mm ø 20 mm ø 80 mm ø 50 mm ø 40 mm
    < 200 mm < 200 mm < 260 x 140 mm ø 50 mm ø 30 mm ø 25 mm ø 100 mm ø 60 mm ø 50 mm
    For hollow profiles and tubes longer than 10 meters, or with dimensions not listed in this table, it is necessary to contact Rotocoat prior to hot-dip galvanising.
    In consultation with Rotocoat can be determined how many holes should be drilled and in which position in order for the zinc to flow properly.

    FOR MORE INFORMATION ROTOCOAT.NL


    member of

    You might also like