W2526_7_03_036_061_26 9/6/03 3:42 AM Page 47

Pipe Hangers
'B' Center of pipe
'A' to top of hanger. Material: Steel (Stainless Steel Type 304
(Rod Size) 'C' Rod Take-Out
Hanger Rod
available up to 2" (50))
Center of pipe to
Not Included bottom of hanger rod. Standard Finish: Pre-Galvanized
'D' Top of pipe to Service: Designed for suspending insulated
'C' bottom of hanger rod pipe (with shield) or non-insulated pipe allowing
nut. for vertical adjustment.
'B'
'D'
Feature: Captive adjusting nut in NFPA rod
sizes.
Ordering: Specify part number and finish.
B3174C Approvals: Underwriters' Laboratories Listed
B3174F for 3/4" (20) thru 4" (100) in steel only.

Figure B3174 Twirl Adjustable Band Hanger

(Available with felt lining as B3174F-size or plastic coated as B3174C-size)
Nominal Rod Size Design Load Wt./C
Part No. Pipe Size 'A' 'B' 'C' 'D' Lbs. kN Lbs. kg

Pipe Hangers
1 1 3 15 3 11
B3174- /2 /2" (15) /8"-16 2 /32" (62.7) 1 /4" (44.4) 1 /16" (42.9) 200 (.89) 12 (5.4)
3 3 3 9 25 1
B3174- /4 /4" (20) /8"-16 2 /16" (65.1) 1 /32" (45.2) 1 /4" (31.7) 200 (.89) 12 (5.4)
3
B3174-1 1" (25) /8"-16 211/16" (68.3) 125/32" (45.2) 11/8" (28.6) 200 (.89) 13 (5.9)
B3174-11/4 11/4" (32) 3
/8"-16 31/8" (79.4) 21/32" (51.6) 13/16" (30.2) 200 (.89) 13 (5.9)
1 1 3 15 9 5
B3174-1 /2 1 /2" (40) /8"-16 3 /32" (88.1) 2 /32" (57.9) 1 /16" (33.3) 200 (.89) 14 (6.3)
3
B3174-2 2" (50) /8"-16 331/32" (100.8) 217/32" (64.3) 15/16" (33.3) 200 (.89) 18 (8.1)
1 1 3 11 9
B3174-2 /2 2 /2" (65) /8"-16 4 /16" (119.1) 3" (76.2) 1 /16" (39.7) 240 (1.06) 27 (12.2)
3
B3174-3 3" (80) /8"-16 53/8" (136.5) 33/8" (85.7) 119/32" (40.5) 280 (1.24) 30 (13.6)
B3174-31/2 31/2" (90) 3
/8"-16 6" (152.4) 33/4" (95.2) 123/32" (43.6) 320 (1.42) 32 (14.5)
3 9 1 3
B3174-4 4" (100) /8"-16 6 /16" (166.7) 4 /16" (103.2) 1 /4" (44.4) 400 (1.78) 47 (21.8)

'A'
(Rod Size) 'B' Center of pipe Material: Steel
Hanger Rod Not to top of hanger.
Included Standard Finish: Dura-Copper®
'C' 'C' Rod Take-Out
Center of pipe to Service: Designed for suspending copper
'D' bottom of hanger rod.
'B' tubing allowing for vertical adjustment.
'D' Top of pipe to (Available with plastic coating to provide
bottom of hanger rod B3174CTC additional separation between tubing and
B3174CT nut.
hanger).
Ordering: Specify part number and finish.
Figure B3174CT Twirl Adjustable Band Hanger
(Available with plastic coating as B3174CTC-size)
Nominal Rod Size Design Load Wt./C
Part No. Tubing Size 'A' 'B' 'C' 'D' Lbs. kN Lbs. kg
1 1 3 1 1 3
B3174CT- /2 /2" (15) /8"-16 2 /8" (54.0) 1 /2" (38.1) 1 /8" (34.9) 200 (.89) 12 (5.4)
B3174CT-3/4 3
/4" (20) 3
/8"-16 2" (50.8) 13/8" (34.9) 15/32" (29.3) 200 (.89) 13 (5.9)
3 1 7 3
B3174CT-1 1" (25) /8"-16 2 /16" (52.4) 1 /16" (36.5) 1 /32" (27.8) 200 (.89) 13 (5.9)
B3174CT-11/4 11/4" (32) 3
/8"-16 2" (50.8) 13/8" (34.9) 7
/8" (22.2) 200 (.89) 13 (5.9)
1 1 3 1 1 7
B3174CT-1 /2 1 /2" (40) /8"-16 2 /8" (54.0) 1 /2" (38.1) /8" (22.2) 200 (.89) 13 (5.9)
3
B3174CT-2 2" (50) /8"-16 215/16" (74.6) 25/16" (58.7) 17/16" (36.5) 200 (.89) 16 (7.2)
B3174CT-21/2 21/2" (65) 3
/8"-16 37/16" (87.3) 213/16" (71.4) 111/16" (42.9) 240 (1.07) 25 (11.3)
3
B3174CT-3 3" (80) /8"-16 315/16" (100.0) 35/16" (84.1) 17/8" (47.6) 280 (1.24) 28 (12.7)
1 1 3 3 9
B3174CT-3 /2 3 /2" (90) /8"-16 4 /16" (106.4) 3 /16" (90.5) 11/4" (31.7) 320 (1.42) 27 (12.2)
3 1 5 1
B3174CT-4 4" (100) /8"-16 4 /4" (107.9) 3 /8" (92.1) 1 /16" (27.0) 400 (1.78) 30 (13.6)

All dimensions in charts and on drawings are in inches. Dimensions shown in

parentheses are in millimeters unless otherwise specified. 47
W2526_7_03_036_061_26 9/6/03 3:42 AM Page 48

Pipe Hangers
'A'
(Rod Size) Material: Steel
Hanger Rod B3170NFC
Not Included
Standard Finish: Pre-Galvanized
Service: Designed for suspending insulated pipe
'B'
Center of pipe to top of
(with shield) or non-insulated pipe allowing for ver-
'C' tical adjustment.
knurled hanger rod nut.
'C' Ordering: Specify part number and finish.
'D' Rod Take-Out
'B'
Center of pipe to B3170NFF Approvals: Underwriters' Laboratories Listed for
bottom of hanger rod. 1
/2" (15) thru 4" (100). Complies with Federal
'D' Specification WW-H-171E Type 10 and
Top of pipe to bottom of
hanger rod nut. Manufacturers Standardization Society MSS SP-69 &
SP-58 Type 10, and the National Fire Protection
Association Code (NFPA).
Figure B3170NF Adjustable Swivel Ring
(Available with plastic coating as B3170NFC-size or felt lined as B3170NFF-size)
Nominal Rod Size Design Load Wt./C
Part No. Pipe Size 'A' 'B' 'C' 'D' Lbs. kN Lbs. kg
1 1 3 3 1 1
B3170NF- /2 /2" /8"-16 2 /8" 1 /4" 1 /16" 180 11
Pipe Hangers

(15) (60.3) (31.7) (27.0) (.80) (5.0)

B3170NF-3/4 3
/4" (20) 3
/8"-16 23/8" (60.3) 15/16" (33.3) 11/16" (27.0) 180 (.80) 12 (5.4)
3 5 1 1
B3170NF-1 1" (25) /8"-16 2 /8" (66.7) 1 /2" (38.1) 1 /16" (27.0) 180 (.80) 13 (5.9)
B3170NF-11/4 11/4" (32) 3
/8"-16 27/8" (73.0) 111/16" (42.9) 11/8" (28.6) 180 (.80) 14 (6.3)
B3170NF-11/2 11/2" (40) 3
/8"-16 31/8" (79.4) 115/16" (49.2) 11/4" (31.7) 180 (.80) 14 (6.3)
3 1 5 3
B3170NF-2 2" (50) /8"-16 3 /2" (88.9) 2 /16" (58.7) 1 /8" (34.9) 180 (.80) 16 (7.2)
B3170NF-21/2 21/2" (65) 3
/8"-16 4" (101.6) 25/8" (66.7) 17/16" (36.5) 200 (.89) 25 (11.3)
3
B3170NF-3 3" (80) /8"-16 41/2" (114.3) 31/8" (79.4) 15/8" (41.3) 250 (1.11) 29 (13.1)
B3170NF-31/2 31/2" (90) 3
/8"-16 415/16" (125.4) 39/16" (90.5) 113/16" (46.0) 300 (1.33) 33 (14.9)
3 3 5 5
B3170NF-4 4" (100) /8"-16 5 /16" (131.8) 3 /8" (92.1) 1 /8" (41.3) 360 (1.60) 40 (18.1)
1
B3170NF-5 5" (125) /2"-13 523/32" (145.2) 41/8" (104.8) 15/8" (41.3) 480 (2.13) 83 (37.6)
1
B3170NF-6 6" (150) /2"-13 613/16" (173.0) 51/16" (128.6) 2" (50.8) 630 (2.80) 91 (41.3)
1
B3170NF-8 8" (200) /2"-13 81/16" (204.8) 65/16" (160.3) 21/4" (57.1) 970 (4.31) 130 (58.9)

'A' (Rod Size)

Hanger Rod Not Material: Steel
Included Standard Finish: Pre-Galvanized
Service: Designed for suspending insulated
'B'
Center of pipe to top of pipe (with shield) or non-insulated pipe allowing
'C'
knurled hanger rod nut. for vertical adjustment.
'C'
'D' Ordering: Specify part number and finish.
Rod Take-Out
'B'
Center of pipe to Approvals: Complies with Federal Specification
bottom of hanger rod.
WW-H-171E Type 10 and Manufacturers
'D'
Standardization Society MSS SP-69 & SP-58
Top of pipe to bottom of
hanger rod nut. Type 10.
Note: For pipe sizes 2" (50) and under, use
B3170NF.
Figure B3170 Adjustable Swivel Ring
Nominal Rod Size Design Load Wt./C
Part No. Pipe Size 'A' 'B' 'C' 'D' Lbs. kN Lbs. kg
1 1 1 5 7
B3170-2 /2 2 /2" (65) /2"-13 4" (101.6) 2 /8" (66.7) 1 /16" (36.5) 300 (1.33) 29 (13.1)
1
B3170-3 3" (80) /2"-13 41/2" (114.3) 31/8" (79.4) 15/8" (41.3) 300 (1.33) 34 (15.4)
1 1 1 15 9 13
B3170-3 /2 3 /2" (90) /2"-13 4 /16" (125.4) 3 /16" (90.5) 1 /16" (46.0) 300 (1.33) 42 (19.0)
5
B3170-4 * 4" (100) /8"-11 53/16" (131.8) 35/8" (92.1) 15/8" (41.3) 475 (2.11) 54 (24.5)
5 23 1 5
B3170-5 5" (125) /8"-11 5 /32" (145.2) 4 /8" (104.8) 1 /8" (41.3) 475 (2.11) 97 (44.0)
3 1
B3170-6 6" (150) /4"-10 7" (177.8) 5 /16" (128.6) 2" (50.8) 950 (4.22) 113 (51.2)
3
B3170-8 8" (200) /4"-10 8" (203.2) 65/16" (160.3) 21/4" (57.1) 950 (4.22) 140 (63.5)
1 1
* Available for /2"-13 rod size. Specify as B3170-4-R /2

All dimensions in charts and on drawings are in inches. Dimensions shown in

48 parentheses are in millimeters unless otherwise specified.
W2526_7_03_036_061_26 9/6/03 3:43 AM Page 49

Pipe Hangers
Material: Steel
Standard Finish: Dura-Copper®
Service: Designed for suspending copper tubing,
'A' allowing for vertical adjustment. (Available with
(Rod Size) plastic coating to provide additional separation
Hanger Rod between tubing and hanger).
Not Included
Ordering: Specify part number, rod size and finish.
'C' 'B'
Note: Sizes 21/2" (65) thru 4" (100) available for
Center of pipe to top of
3
/8"-16 rod size.
'D' knurled hanger rod nut.
'C'
Approvals: Complies with Federal Specifications
'B' Rod Take-Out WW-H-171E Type 10 and Manufacturers
Center of pipe to Standardization Society MSS SP-69 & SP-58 Type 10.
bottom of hanger rod.
'D'
Top of pipe to bottom
of hanger rod nut.
B3170CT

Pipe Hangers
B3170CTC

Figure B3170CT Adjustable Swivel Ring

(Available with Plastic Coating as B3170CTC-size)
Nominal Rod Size Design Load Wt./C
Part No. Tubing Size 'A' 'B' 'C' 'D' Lbs. kN Lbs. kg

1 1 3 1 1 31
B3170CT- /2 /2" (15) /8"-16 2 /16" (52.4) 1 /8" (28.6) /32" (24.6) 180 (.80) 8 (3.6)
3 3 3 5 5 1
B3170CT- /4 /4" (20) /8"-16 2 /16" (58.7) 1 /16" (33.3) 1 /32" (26.2) 180 (.80) 10 (4.5)
3 1 9 5
B3170CT-1 1" (25) /8"-16 2 /2" (63.5) 1 /16" (39.7) 1 /32" (29.3) 180 (.80) 10 (4.5)

B3170CT-11/4 11/4" (32) 3

/8"-16 21/2" (63.5) 19/16" (39.7) 1" (25.4) 180 (.80) 12 (5.4)

B3170CT-11/2 11/2" (40) 3

/8"-16 215/16" (74.6) 2" (50.8) 15/16" (33.3) 180 (.80) 12 (5.4)
3 1 1 3
B3170CT-2 2" (50) /8"-16 3 /8" (79.4) 2 /8" (54.0) 1 /16" (30.2) 180 (.80) 12 (5.4)
1 1 1 1 9 3
B3170CT-2 /2 2 /2" (65) /2"-13 4 /16" (103.2) 2 /16" (65.1) 1 /8" (34.9) 200 (.80) 31 (14.0)
1 15 3 1
B3170CT-3 3" (80) /2"-13 3 /16" (100.0) 3 /4" (69.8) 1 /4" (31.7) 250 (1.11) 33 (14.9)
1 1 1 7 1 1
B3170CT-3 /2 3 /2" (90) /2"-13 4 /16" (112.7) 3 /4" (82.5) 1 /2" (38.1) 300 (1.33) 38 (17.2)
1 11 9 9
B3170CT-4 4" (100) /2"-13 4 /16" (119.1) 3 /16" (90.5) 1 /16" (39.7) 360 (1.60) 40 (18.1)
1
B3170CT-5 5" (125) /2"-13 515/16" (150.8) 45/16" (109.5) 125/32" (45.2) 480 (2.13) 95 (43.1)
5
B3170CT-6 6" (150) /8"-11 611/16" (169.9) 53/16" (131.8) 21/8" (54.0) 630 (2.80) 118 (53.5)

All dimensions in charts and on drawings are in inches. Dimensions shown in

parentheses are in millimeters unless otherwise specified. 49
W2526_7_03_036_061_26 9/6/03 3:43 AM Page 50

Pipe Hangers
'B'
'A'
Bottom of pipe to Material: Steel (Stainless Steel Type 304
(Rod Size) top of hanger.
B3172C available)
Hanger Rod
'C'
Not Included Center of pipe to Standard Finish: Plain or Electro-Plated
top of hanger.
'E' 'D' Service: Designed for suspending non-insu-
Rod Take-Out lated pipe allowing for vertical adjustment.
Center of pipe to
bottom of hanger rod. Ordering: Specify part number and finish
'E'
Adjustment Approvals: Complies with Federal
Top of pipe to top
'D' 'C' of hanger rod nut Specification WW-H-171E Type 7 and
inside the hanger. Manufacturers Standardization Society
'B' 'F' MSS SP-69 & SP-58 Type 7.
Minimum thread
length of hanger rod.
B3172F

Figure B3172 Adjustable Band Hanger

(Available with plastic coating as B3172C-size or felt lined as B3172F-size)
Pipe Hangers

Nominal Rod Size

Part No. Pipe Size 'A' 'B' 'C' 'D'

B3172-1/2 1
/2" (15) 3
/8"-16 25/8" (66.7) 23/16" (55.6) 17/16" (36.5)

B3172-3/4 3
/4" (20) 3
/8"-16 25/8" (66.7) 21/16" (52.4) 15/16" (33.3)
3 11 1 5
B3172-1 1" (25) /8"-16 2 /16" (68.3) 2 /16" (52.4) 1 /16" (33.3)
1 1 3 7 9 13
B3172-1 /4 1 /4" (32) /8"-16 3 /16" (87.3) 2 /16" (65.1) 1 /16" (46.0)
1 1 3 11 3
B3172-1 /2 1 /2" (40) /8"-16 3 /16" (93.7) 2 /4" (69.8) 2" (50.8)
3 3 1
B3172-2 2" (50) /8"-16 4 /16" (106.4) 3" (76.2) 2 /4" (57.1)
1 1 1 7 7 7
B3172-2 /2 2 /2" (65) /2"-13 4 /8" (123.8) 3 /16" (87.3) 2 /16" (61.9)
1 1 1
B3172-3 3" (80) /2"-13 6" (152.4) 4 /4" (107.9) 3 /4" (82.5)
1 1 1 1 1 1
B3172-3 /2 3 /2" (90) /2"-13 6 /8" (155.6) 4 /8" (104.8) 3 /8" (79.4)
1 3 1 1
B3172-4 4" (100) /2"-13 6 /4" (171.4) 4 /2" (114.3) 3 /4" (82.5)
1 3 3
B3172-5 5" (125) /2"-13 7 /4" (196.8) 5" (127.0) 4 /4" (120.6)
3
B3172-6 6" (150) /4"-10 10" (254.0) 611/16" (169.9) 53/16" (131.8)
3
B3172-8 8" (200) /4"-10 117/8" (301.6) 79/16" (192.1) 613/16" (173.0)

Design Load Wt./C

Part No. 'E' 'F' Lbs. kN Lbs. kg

B3172-1/2 11/4" (31.7) 21/2" (63.5) 610 (2.71) 11 (5.0)

3 1
B3172- /4 1" (25.4) 2 /2" (63.5) 610 (2.71) 12 (5.4)
11 1
B3172-1 /16" (17.5) 2 /2" (63.5) 610 (2.71) 12 (5.4)
1 1 1
B3172-1 /4 1 /4" (31.7) 2 /2" (63.5) 610 (2.71) 14 (6.3)
1 3 1
B3172-1 /2 1 /16" (30.2) 2 /2" (63.5) 610 (2.71) 16 (7.2)
3 1
B3172-2 1 /16" (30.2) 2 /2" (63.5) 610 (2.71) 23 (10.4)
1 1 1
B3172-2 /2 1 /4" (31.7) 3 /2" (88.9) 970 (4.31) 28 (12.7)
5 1
B3172-3 1 /8" (41.3) 3 /2" (88.9) 970 (4.31) 41 (18.6)
1 3 1
B3172-3 /2 1 /8" (34.9) 3 /2" (88.9) 970 (4.31) 44 (19.9)

B3172-4 13/8" (34.9) 31/2" (88.9) 1250 (5.56) 81 (36.7)

B3172-5 11/4" (31.7) 4" (101.6) 1250 (5.56) 100 (45.3)

1 1
B3172-6 2 /8" (54.0) 4 /2" (114.3) 1600 (7.11) 160 (72.6)
1
B3172-8 2" (50.8) 4 /2" (114.3) 1800 (8.00) 260 (117.9)

All dimensions in charts and on drawings are in inches. Dimensions shown in

50 parentheses are in millimeters unless otherwise specified.
W2526_7_03_036_061_26 9/6/03 3:43 AM Page 51

Pipe Hangers
Material: Steel
Standard Finish: Dura-Copper®

'A' 'B' Service: Designed for suspending copper

(Rod Size) Bottom of pipe tubing allowing for vertical adjustment.
Hanger Rod to top of hanger. (Available with plastic coating to provide
Not Included 'C' additional separation between tubing and
Center of pipe
to top of hanger. hanger).
E''
'D' Ordering: Specify part number and finish.
Rod Take-Out
Center of pipe to Approvals: Complies with Federal
bottom of hanger
rod. Specification WW-H-171E Type 7 and
'D' 'E' Manufacturers Standardization Society
'C' Adjustment MSS SP-69 & SP-58 Type 7.
'B' Top of pipe to top
of hanger rod nut
inside the hanger.
'F'
Minimum thread
length of hanger rod.

Pipe Hangers
B3172CT

Figure B3172CT Adjustable Band Hanger B3172CTC

(Available with plastic coating as B3172CTC-size)
Nominal Rod Size
Part No. Tubing Size 'A' 'B' 'C' 'D'

B3172CT-1/2 1
/2" (15) 3
/8"-16 29/16" (65.1) 21/4" (57.1) 11/2" (38.1)
3 3 3 9 1 3
B3172CT- /4 /4" (20) /8"-16 2 /16" (65.1) 2 /8" (54.0) 1 /8" (34.9)
3 9 1
B3172CT-1 1" (25) /8"-16 2 /16" (65.1) 2" (50.8) 1 /4" (31.7)
1 1 3 3 1 5
B3172CT-1 /4 1 /4" (32) /8"-16 2 /4" (69.8) 2 /16" (52.4) 1 /16" (33.3)

B3172CT-11/2 11/2" (40) 3

/8"-16 31/8" (79.4) 25/16" (58.7) 19/16" (39.7)
3
B3172CT-2 2" (50) /8"-16 311/16" (93.7) 25/8" (66.7) 17/8" (47.6)
1 1 1 1 3 5
B3172CT-2 /2 2 /2" (65) /2"-13 4 /2" (114.3) 3 /16" (81.0) 2 /16" (58.7)
1 7 1
B3172CT-3 3" (80) /2"-13 5" (127.0) 3 /16" (87.3) 2 /2" (63.5)
1 1 1 3 15
B3172CT-3 /2 3 /2" (90) /2"-13 5 /4" (146.0) 3 /16" (100.0) 3" (76.2)
1 1 3 1
B3172CT-4 4" (100) /2"-13 6 /4" (158.7) 4 /16" (106.4) 3 /4" (82.5)

Design Load Wt./C

Part No. 'E' 'F' Lbs. kN Lbs. kg

B3172CT-1/2 17/16" (36.5) 21/2" (63.5) 610 (2.71) 12 (5.4)

3 3 1
B3172CT- /4 1 /16" (30.2) 2 /2" (63.5) 610 (2.71) 12 (5.4)
15 1
B3172CT-1 /16" (23.8) 2 /2" (63.5) 610 (2.71) 12 (5.4)
1 7 1
B3172CT-1 /4 /8" (22.2) 2 /2" (63.5) 610 (2.71) 12 (5.4)
1 1
B3172CT-1 /2 1" (25.4) 2 /2" (63.5) 610 (2.71) 13 (5.9)
1 1
B3172CT-2 1 /16" (27.0) 2 /2" (63.5) 610 (2.71) 16 (7.2)
1 1 1
B3172CT-2 /2 1 /4" (31.7) 2 /2" (63.5) 970 (4.31) 30 (13.6)
3 1
B3172CT-3 1 /16" (30.2) 2 /2" (63.5) 970 (4.31) 32 (14.5)
1 7 1
B3172CT-3 /2 1 /16" (36.5) 2 /2" (63.5) 970 (4.31) 40 (18.1)

B3172CT-4 17/16" (36.5) 21/2" (63.5) 970 (4.31) 49 (22.2)

All dimensions in charts and on drawings are in inches. Dimensions shown in

parentheses are in millimeters unless otherwise specified. 51
 Brackets
1" Material: Steel
(25.4)

Standard Finish: Plain or Electro-Plated

'A'
7
Service: Designed for suspending light loads
/16" Dia.
(11.1) at fixed distances from walls or structures.
Ordering: Specify part number and finish.
For 3/8"-16 rod.
Hanger Rod
Not Included

'B'
Steel Size
'C'

13
/16" Dia.
(20.6)
2 Holes

1"
(25.4)

Figure B3068 Light Duty Welded Bracket

Design Load Wt./C
Part No. 'A' 'B' 'C' Steel Size Lbs. kN Lbs. kg
1 1 1
B3068-1 10" (254.0) 6 /2" (165.1) 9" (228.6) /4" x 1 /2" (6.3 x 38.1) 730 (3.25) 284 (128.8)
1 1 1
B3068-2 14" (355.6) 10 /2" (266.7) 13" (330.2) /4" x 1 /2" (6.3 x 38.1) 730 (3.25) 429 (194.6)
1 3
B3068-3 20" (508.0) 16 /2" (419.1) 19" (482.6) /8" x 2" (9.5 x 50.8) 730 (3.25) 1279 (580.1)

11/4"
3
/8" Dia. Material: Steel
(31.7) (9.5)
9 Standard Finish: Plain or Electro-Plated
/16" Dia.
(14.3)
Service: Designed for supporting pipe from
2 Holes
walls or structures where lateral adjustment is
required.
'B' Ordering: Specify part number and finish.
Brackets

o
'A' 45

15/8"
B22 Channel (41.2)

B32 Channel

2"
(50.8)
11/4"
(31.7)

Figure B3064 Adjustable Strut Bracket

Design Load Wt./C
Part No. 'A' 'B' Lbs. kN Lbs. kg

B3064-1 15" (381.0) 12" (304.8) 1200 (5.34) 660 (299.4)

B3064-2 21" (533.4) 18" (457.2) 800 (3.56) 1004 (455.4)

B3064-3 27" (685.8) 24" (609.6) 600 (2.67) 1346 (610.5)

All dimensions in charts and on drawings are in inches. Dimensions shown in

142 parentheses are in millimeters unless otherwise specified.
 Threaded Accessories

'C'
Material: Steel (Stainless steel available)
'B'
'A' Standard Finish: Plain or Electro-Plated
Thread Size
'E'
Design Service: Designed as a support, guide, or
Load 2 Hex Nuts Included anchor for pipe.
'TL' 'TL' Ordering: Specify part number and finish.
Thread Length
'D' Approvals: Underwriters' Laboratories Listed
for 3/4" (20) thru 12" (300). Complies with Federal
Design Specification WW-H-171E Type 24 and
Load 3 Manufacturers Standardization Society
MSS SP-69 & SP-58 Type 24.
Design
Load 1

B3188NS - Non-standard (NS) U-bolts are available

upon request. Specify dimensions other than standard.
B3188DI - For Ductile Iron Pipe.

B3188C
Plastic Coated

Figure B3188 Standard U-Bolt

(Available with plastic coating as B3188C-size)
Nominal Thread Size Thread Length
Part No. Pipe Size 'A' 'TL' 'B'
B3188-1/2 1/2" (15) 1/4"-20 21/8" (54.0) 15/16" (23.8)
B3188-3/4 3/4" (20) 1/4"-20 21/8" (54.0) 11/8" (28.6)
B3188-1 1" (25) 1/4"-20 21/8" (54.0) 13/8" (34.9)
B3188-11/4 11/4" (32) 3/8"-16 21/8" (54.0) 111/16" (42.9)
B3188-11/2 11/2" (40) 3/8"-16 21/2" (63.5) 2" (50.8)
B3188-2 2" (50) 3/8"-16 21/2" (63.5) 27/16" (61.9)
B3188-21/2 21/2" (65) 1/2"-13 3" (76.2) 215/16" (74.6)
B3188-3 3" (80) 1/2"-13 3" (76.2) 39/16" (90.5)
B3188-31/2 31/2" (90) 1/2"-13 3" (76.2) 41/16" (103.2)
B3188-4 4" (100) 1/2"-13 3" (76.2) 49/16" (115.9)
B3188-5 5" (125) 1/2"-13 3" (76.2) 521/32" (143.6)
B3188-6 6" (150) 5/8"-11 33/4" (95.2) 63/4" (171.4)
B3188-8 8" (200) 5/8"-11 33/4" (95.2) 83/4 " (222.2)
B3188-10 10" (250) 3/4"-10 4" (101.6) 107/8" (276.2)
Accessories
Threaded

B3188-12 12" (300) 7/8"-9 41/4" (107.9) 127/8" (327.0)

B3188-14 14" (350) 7/8"-9 41/4" (107.9) 141/8" (358.8)
B3188-16 16" (400) 7/8"-9 41/4" (107.9) 161/8" (409.6)
B3188-18 18" (450) 1"-8 43/4" (120.6) 181/8" (460.4)
B3188-20 20" (500) 1"-8 43/4" (120.6) 201/8" (511.2)
B3188-24 24" (600) 1"-8 43/4" (120.6) 241/8" (612.8)
B3188-30 30" (750) 1"-8 43/4" (120.6) 301/8" (765.2)

All dimensions in charts and on drawings are in inches. Dimensions shown in

158 parentheses are in millimeters unless otherwise specified.