INDEX NO.

300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

AH Hydraulic
Setting Tool
The Weatherford AH Hydraulic Setting Tool is used to convey and set the
UltraPak and BlackCat sealbore packers on a workstring. Heavy -duty
construction allows packer assembly to be worked through tight spots and into
horizontal sections. The packer is set by surface pressure, or a combination of
surface pressure and workstring tension. The packer can be tested from
surface down the annulus before the AH setting tool is released. The AH
setting tool can be released by right-hand rotation, or by optional shear release
using hydraulic pressure.

Features
• Heavy-duty construction for pushing tools into deviated or horizontal wells
• Mandrel seal allows annulus pressure-test before AH setting tool is
released
• Drillpipe connections available
• Automatic workstring fill and drain
• Adjustable start-to-set pressure
• Optional shear release when rotation is unavailable
• AH allows circulation before packer is set

Benefits
• Sets packers in high-angle and horizontal wells
• Allows packer assembly to be pushed into place
• High-strength mandrel sets packer with high-tailpipe loads
• Sets all permanent and retrievable sealbore packers
• Testing possible after setting to ensure packer integrity

Applications
• All wireline-set sealbore packer completions
• Completions with high-tailpipe loads
• Deviated and horizontal wells
• Large-casing packers

Weatherford products and services are subject to Weatherford’s standard terms and
1 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

SPECIFICATION GUIDE

Packer
OD Max OD Standard Thread Product
Bore
in/mm in/mm Connections Number
in/mm
2.688 3.750
2-3/8 EU 8RD 583-45-000
4-1/2 68.28 95.25
114.3 2.390 3.600
2-3/8 EU 8RD 583-46-000
60.71 91.44
5 2.688 3.968
2-3/8 EU 8RD 583-50-001
127.0 68.28 100.79
3.000 4.438
2-7/8 EU 8RD 583-55-000
5-1/2 76.20 112.73
139.7 2.688 4.438
2-7/8 EU 8RD 583-55-001
68.28 112.73
4.000 5.468
2-7/8 EU 8RD 583-74-001
7 101.60 138.89
177.8 3.250 5.468
2-7/8 EU 8RD 583-70-325
82.55 138.89
6.000 8.000
4-1/2 IF DP 583-96-000HD
152.40 203.20
9-5/8 4.750 8.000
2-7/8 EU 8RD 583-95-000
244.5 120.65 203.20
4.000 8.000
2-7/8 EU 8RD 583-94-005
101.60 203.20

Weatherford products and services are subject to Weatherford’s standard terms and
2 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

OPERATION

As pressure is applied to the tubing string, pressure enters the cylinder through the hole at the top of the lower
mandrel. This pressure creates a force down on the connector body, which in turn pushes down on the setting
sleeve. An equal and opposite force acts up on the lower mandrel. The locking nut in the packer mechanically holds
the setting force in the tool. These forces (when proper pressure is applied) combine to set the slips and pack-off the
element.
WARNING: Packer assemblies, which are plugged below the setting tool, do not require the use
of a ball in the AH Setting Tool. The use of a setting ball when the packer is plugged may
cause the setting tool to be differentially stuck in the packer.

SETTING PROCEDURE

Run the packer and setting tool to setting depth and drop the setting ball down the tubing. (The fall rate in fresh water
is approximately 100 ft/min.) After the ball has seated, apply pressure down the tubing (see setting tool usage chart)
and hold pressure for a minimum of 10 minutes. Pull tension to insure packer is set. After packer is set, release
pressure and set weight down on the packer. If desired, tension may be pulled again to insure packer is set. If
desired, pressure may be applied down the annulus above the packer to test packer seat. Pull slight tension on tool
and rotate tubing (12 to 15 rounds) to the right at the packer to release from the packer. Setting tool may now be
pulled from wellbore.

AH SETTING TOOL USAGE CHART

If you pressure to….. Then pull……. ON 4-1/2" and 5":

( PSI ) ( LBS. ) MAXIMUM COMBINED
*1,000 40,000 FORCE SHOULD NOT
1,500 35,000 EXCEED 30,000 LBS.
2,000 30,000 AT THE TOOL
2,500 25,000
3,000 20,000
3,500 15,000
4,000 10,000
4,500 5,000
5,000 0
* This is the minimum pressure that should be used if all four brass shear screws
are installed in the setting cylinder

Weatherford products and services are subject to Weatherford’s standard terms and
3 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

INSTALLATION ONTO THE PACKER

1.) Loosen set screws (10) and rotate setting sleeve (13) to adjuster nut (12).
2.) Stab the setting tool into the packer bore through the packer setting sleeve and screw top thread adapter (18)
into packer ( LEFT HAND THREADS ).
3.) Screw the setting sleeve (13) down until it shoulders against the packer setting sleeve.

ASSEMBLY

1.) Install o-ring (7) onto upper mandrel (2).

2.) Install cylinder stop (4) onto upper mandrel (2) and install set screws (3). [ On 9-5/8” X 6.0” install o-ring (26) in
top coupling (1).]
3.) Screw top coupling (1) onto upper mandrel (2). [ On 9-5/8” x 6.0” install set screw (27).]
4.) Screw lower mandrel (14) onto upper mandrel (2). [ On 9-5/8” x 6.0” install set screw (8).]
5.) Slide setting cylinder (6) over lower mandrel (14) until it rests on cylinder stop (4).
6.) Install o-rings ( 7 & 11 ) onto connector body (9).
7.) Slide connector body (9) over lower mandrel (14) and screw it into setting cylinder (6).
8.) Screw adjuster sub (12) onto connector body (9).
9.) Screw top thread adapter (18) onto seal mandrel (19) and install set screw (16).
10.) Install o-ring (17) into seal mandrel (19) and screw seal mandrel (19) onto lower mandrel (14). Install set screw
(15).
11.) [On 13-3/8”, install o-ring (28) in top thread adapter (18).]
12.) Install seal o-ring (21) into seal (20). Install seal (20) and seal spacer (22) onto seal mandrel (19).
13.) Install o-ring (23) onto seal mandrel (19) and screw seal mandrel cap (25) onto seal mandrel (19).
14.) Slide setting sleeve (13) over seal mandrel (19) and screw into adjuster sub (12). Install set screw (10).
15.) Install shear screws (5) into setting cylinder (6) and cylinder stop (4).

Weatherford products and services are subject to Weatherford’s standard terms and
4 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

DIMENSIONAL DATA E
C 1
P \ N: 583-45-000 DIMENSIONS (IN.)
SEAL
SIZE A B C D E
BORE B

4-1/2" 2.688" 42.750 4.250 N/A 20.063 3.060 F

2

P \ N: 583-45-000 DIMENSIONS (IN.)

SEAL
SIZE F G H J K
BORE 3
4
5
4-1/2" 2.688" 1.500 3.750 1.250 3.750 0.750

P \ N: 583-46-000 DIMENSIONS (IN.)

G
SEAL
SIZE A B C D E
BORE 6

4-1/2" 2.39" 40.750 4.250 N/A 14.000 3.250

P \ N: 583-46-000 DIMENSIONS (IN.)

SEAL 7
SIZE F G H J K
BORE 7
9
4-1/2" 2.39" 1.500 3.600 1.250 3.600 0.750
10

P \ N: 583-50-001 DIMENSIONS (IN.) 11

A 12
SEAL
SIZE A B C D E
BORE
5" 2.688" 43.250 4.250 N/A 16.310 3.750
13
P \ N: 583-50-001 DIMENSIONS (IN.) H
SEAL 14
SIZE F G H J K
BORE
5" 2.688" 1.500 3.750 1.250 3.968 0.750
D

15
16
J
17
18

19

20
21
22
21
20
23
K 24
25

Weatherford products and services are subject to Weatherford’s standard terms and
5 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

DIMENSIONAL DATA E
C 1
P \ N: 583-55-000 DIMENSIONS (IN.)
SEAL
SIZE A B C D E B
BORE
F
5-1/2" 3.000" 63.380 5.250 7.630 20.625 3.690 2

P \ N: 583-55-000 DIMENSIONS (IN.)

SEAL
SIZE F G H J K 3
BORE 4
5
5-1/2" 3.000" 1.500 4.438 1.250 4.438 0.750

P \ N: 583-55-001 DIMENSIONS (IN.)

G
SEAL
SIZE A B C D E 6
BORE
5-1/2" 2.688" 63.380 5.250 7.630 20.625 3.690

P \ N: 583-55-001 DIMENSIONS (IN.)

SEAL 7
SIZE F G H J K
BORE 7
9
5-1/2" 2.688" 1.500 4.438 1.250 4.438 0.750
10

P \ N: 583-70-325 DIMENSIONS (IN.) A

11
12
SEAL
SIZE A B C D E
BORE
7" 3.25" 60.130 5.250 7.630 24.310 3.690
13

P \ N: 583-70-325 DIMENSIONS (IN.) H

SEAL 14
SIZE F G H J K
BORE
7" 3.25" 1.500 4.438 1.250 5.468 0.750
D

15
16
J
17
18

19

20
21
22
21
20
23
K 24
25

Weatherford products and services are subject to Weatherford’s standard terms and
6 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

DIMENSIONAL DATA E
C 1
P \ N: 583-74-001 DIMENSIONS (IN.)
SEAL
SIZE A B C D E B
BORE
F
7" 4.00" 64.940 3.250 7.630 26.500 3.690 2

P \ N: 583-74-001 DIMENSIONS (IN.)

SEAL
SIZE F G H J K 3
BORE 4
5
7" 4.00" 1.500 4.438 1.250 5.468 0.750

P \ N: 583-76-001 DIMENSIONS (IN.)

G
SEAL
SIZE A B C D E 6
BORE
7-5/8" 4.25" 64.940 5.250 7.630 26.500 3.690

P \ N: 583-76-001 DIMENSIONS (IN.)

SEAL 7
SIZE F G H J K
BORE 7
9
7-5/8" 4.25" 1.500 4.438 1.250 5.468 0.750
10

P \ N: 583-95-325 DIMENSIONS (IN.) A

11
12
SEAL
SIZE A B C D E
BORE
9-5/8" 3.25" 60.625 5.250 7.630 26.500 3.690
13

P \ N: 583-95-325 DIMENSIONS (IN.) H

SEAL 14
SIZE F G H J K
BORE
9-5/8" 3.25" 1.500 4.438 1.250 5.468 0.750
D

P \ N: 583-95-000 DIMENSIONS (IN.)

SEAL 15
SIZE A B C D E 16
BORE J
17
9-5/8" 4.75" 69.063 5.250 7.630 31.880 3.690
18

P \ N: 583-95-000 DIMENSIONS (IN.)

SEAL
SIZE F G H J K 19
BORE
9-5/8" 4.75" 1.500 4.438 1.250 8.000 0.750
20
21
22
21
20
23
K 24
25

Weatherford products and services are subject to Weatherford’s standard terms and
7 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

E
DIMENSIONAL DATA
C F 1

P\N:583-96-000HD DIMENSIONS (IN.) 26

SEAL 27
SIZE A B C D E B
BORE
9-5/8" 6.00" 70.250 10.688 15.500 31.875 6.125 2

P\N:583-96-000HD DIMENSIONS (IN.)

SEAL
SIZE F G H J K 3
BORE 4
5
9-5/8" 6.00" 3.750 6.875 3.500 8.000 0.750

6
G

7
8
7
9
10

A 11
12

13

14
H

D
J

15
16

17
18

19

20
21
22
21
20
23
K 24
25

Weatherford products and services are subject to Weatherford’s standard terms and
8 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

PARTS LIST

ITEM 583-45-000 583-46-000 583-50-001

DESCRIPTION
NO 4-1/2" X 2.688" 4-1/2" X 2.390" 5" X 2.688"
1 TOP SUB NOT REQ'D NOT REQ'D NOT REQ'D
2 UPPER MANDREL 583-45-210 583-46-210 583-50-210
3 SET SCREW* NOT REQ'D NOT REQ'D NOT REQ'D
4 CYLINDER STOP NOT REQ'D NOT REQ'D NOT REQ'D
5 SHEAR SCREW* B20-C4-006 (4) B20-C4-004 (6) B20-C4-006 (4)
6 SETTING CYLINDER 583-50-750 583-46-750 583-50-750
7 O-RING* 050-90-337 (2) 050-90-336 (2) 050-90-337 (2)
8 SET SCREW* NOT REQ'D NOT REQ'D NOT REQ'D
9 CONNECTOR BODY 583-50-380 583-46-380 583-50-380
10 SET SCREW*3/8-16 X 3/8" 003-C6-006 (3) 003-C6-006 (3) 003-C6-006 (3)
11 O-RING* 050-90-329 050-90-329 050-90-329
12 ADJUSTER NUT NOT REQ'D NOT REQ'D NOT REQ'D
13 SETTING SLEEVE 583-45-470 583-46-470 583-50-476
14 LOWER MANDREL 583-50-220 583-46-220 583-50-220
003-C6-006 (3) 003-C6-006 (3) 003-C6-008 (3)
15 SET SCREW*
3/8-16 X 3/8" 3/8-16 X 3/8" 3/8-16 X 1/2"
16 SET SCREW*3/8-16 X 5/16" NOT REQ'D NOT REQ'D 003-C6-005 (3)
17 O-RING* 050-90-225 050-90-224 050-90-225
18 TOP THREAD ADAPTER NOT REQ'D NOT REQ'D 583-50-610
19 SEAL MANDREL 583-50-216 583-46-215 583-54-230
20 SEAL* 583-55-688 (2) 580-45-B390 (2) 580-55-688 (2)
21 O-RING* 050-90-141 (2) 050-90-137 (2) 050-90-141 (2)
22 SEAL SPACER 583-54-250 583-46-250 583-54-250
23 O-RING* 050-90-225 050-90-224 050-90-225
24 BALL* BRASS 080-00-913 1" 080-00-913 1" 080-00-913 1"
25 SEAL MANDREL CAP 583-54-240 583-46-240 583-54-240
*Common repair parts.

Weatherford products and services are subject to Weatherford’s standard terms and
9 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

PARTS LIST

ITEM 583-55-000 583-55-001 583-70-325

DESCRIPTION
NO 5-1/2" x 3.000" 5-1/2" x 2.688" 7" x 3.250"
1 TOP SUB 12BB-01 12BB-01 12BB-01
2 UPPER MANDREL 583-70-210 583-70-210 583-70-210
003-C6-006 (3) 003-C6-006 (3) 003-C6-012 (3)
3 SET SCREW*
3/8-16 x 3/8" 3/8-16 x 3/8" 3/8-16 x 3/4"
4 CYLINDER STOP 583-70-850 583-70-850 583-70-850
5 SHEAR SCREW* B20-C4-006 (4) B20-C4-006 (4) B20-C4-006 (4)
6 SETTING CYLINDER 583-70-860 583-70-860 583-70-860
7 O-RING* 050-90-342 (2) 050-90-342 (2) 050-90-342 (2)
8 SET SCREW* NOT REQ'D NOT REQ'D NOT REQ'D
9 CONNECTOR BODY 583-70-340 583-70-340 583-70-340
10 SET SCREW*3/8-16 X 3/4" 003-C6-012 (3) 003-C6-012 (3) 003-C6-012 (3)
11 O-RING* 050-90-329 050-90-329 050-90-329
12 ADJUSTER NUT 583-55-740 583-55-740 583-70-740
13 SETTING SLEEVE 583-55-475 583-55-475 583-70-470
14 LOWER MANDREL 583-70-220 583-70-220 583-70-220
003-C4-005 (3) 003-C4-005 (3) 003-C6-008 (3)
15 SET SCREW* 1/4-20 X 5/16" 1/4-20 X 5/16" 3/8-16 X 1/2"
003-C6-006 (3) 003-C6-005 (3) 003-C6-008 (3)
16 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 5/16" 3/8-16 X 1/2"
17 O-RING* 050-90-328 050-90-225 050-90-328
18 TOP THREAD ADAPTER 583-55-610 583-54-610 583-70-610
19 SEAL MANDREL 583-55-230 583-54-230 583-70-231
20 SEAL* 583-55-B510 (2) 580-55-688 (2) 581-70-B510 (2)
21 O-RING* 050-90-147 (2) 050-90-141 (2) 050-90-150 (2)
22 SEAL SPACER 583-55-250 583-54-250 583-70-250
23 O-RING* 050-90-330 050-90-225 050-90-331
24 BALL* BRASS 080-00-913 1" 080-00-913 1" 080-00-913 1"
25 SEAL MANDREL CAP 583-55-240 583-54-240 583-70-240
*Common repair parts.

Weatherford products and services are subject to Weatherford’s standard terms and
10 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

PARTS LIST

ITEM 583-74-001 583-76-001 583-95-325

DESCRIPTION
NO 7" X 4.000" 7-5/8" X 4.250" 9-5/8" X 3.250"
1 TOP SUB 12BB-01 12BB-01 12BB-01
2 UPPER MANDREL 583-70-210 583-70-210 583-70-210
3 SET SCREW*3/8-16 X 1/2" 003-C6-008 (3) 003-C6-008 (3) 003-C6-008 (3)
4 CYLINDER STOP 583-70-850 583-70-850 583-70-850
5 SHEAR SCREW* B20-C4-006 (4) B20-C4-006 (4) B20-C4-006 (4)
6 SETTING CYLINDER 583-70-860 583-70-860 583-70-860
7 O-RING* 050-90-342 (2) 050-90-342 (2) 050-90-342 (2)
8 SET SCREW* NOT REQ'D NOT REQ'D NOT REQ'D
9 CONNECTOR BODY 583-70-340 583-70-340 583-70-340
003-C6-012 (3) 003-C6-008 (3) 003-C6-012 (3)
10 SET SCREW*
3/8-16 X 3/4" 3/8-16 X 1/2" 3/8-16 X 3/4"
11 O-RING* 050-90-329 050-90-329 050-90-329
12 ADJUSTER NUT 583-70-740 583-70-740 583-70-740
13 SETTING SLEEVE 583-74-478 583-74-478 583-70-478
14 LOWER MANDREL 583-70-220 583-70-220 583-70-220
003-C4-008 (3) 003-C6-008 (3) 003-C6-008 (3)
15 SET SCREW* 1/4-20 X 1/2" 3/8-16 X 1/2" 3/8-16 X 1/2"
003-C6-008 (3) 003-C6-008 (3) 003-C6-008 (3)
16 SET SCREW* 3/8-16 X 1/2" 3/8-16 X 1/2" 3/8-16 X 1/2"
17 O-RING* 050-90-328 050-90-328 050-90-328
18 TOP THREAD ADAPTER 583-74-610 583-74-610 583-70-610
19 SEAL MANDREL 583-74-240 583-76-240 583-76-240
20 SEAL* 581-40-510 (2) 580-40-510 (2) 581-40-510 (2)
21 O-RING* 050-90-154 (2) 050-90-154 (2) 050-90-154 (2)
22 SEAL SPACER 583-74-255 583-76-255 583-76-255
23 O-RING* 050-90-337 050-90-338 050-90-338
24 BALL* BRASS 080-00-913 1" 080-00-913 1" 080-00-913 1"
25 SEAL MANDREL CAP 583-74-245 583-76-245 583-76-245
*Common repair parts.

Weatherford products and services are subject to Weatherford’s standard terms and
11 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.

 INDEX NO. 300
UNIT NO. 583-45
PN. 583-45 thru 96
DATE 05, APR 2002

PARTS LIST

ITEM 583-95-000 583-96-000HD

DESCRIPTION
NO 9-5/8" X 4.750" 9-5/8" X 6.000"
1 TOP SUB 12BB-01 583-95-IF610
2 UPPER MANDREL 583-70-210 583-95-210
003-C6-006 (3) 003-C6-008 (3)
3 SET SCREW*
3/8-16 X 3/8" 3/8-16 X 1/2"
4 CYLINDER STOP 583-70-850 583-95-850
5 SHEAR SCREW* B20-C4-006 (4) B20-C6-006 (6)
6 SETTING CYLINDER 583-70-860 583-95-860
7 O-RING* 050-90-342 (2) 050-90-360 (2)
8 SET SCREW*3/8-16 X 1/2" NOT REQ'D 003-C6-008 (3)
9 CONNECTOR BODY 583-70-340 583-95-340
003-C6-012 (3) 003-C6-008 (3)
10 SET SCREW* 3/8-16 X 3/4" 3/8-16 X 1/2"
11 O-RING* 050-90-329 050-90-349
12 ADJUSTER NUT 583-70-740 583-95-740
13 SETTING SLEEVE 583-95-475 870-95-470
14 LOWER MANDREL 583-70-220 583-95-220
003-C6-012 (3) 003-C6-010 (3)
15 SET SCREW* 3/8-16 X 3/4" 3/8-16 X 5/8"
003-C6-008 (3)
16 SET SCREW* NOT REQ'D
3/8-16 X 1/2"
17 O-RING* 050-90-328 050-90-345
18 TOP THREAD ADAPTER 583-95-615 583-96-610
19 SEAL MANDREL 583-95-235 583-96-216
20 SEAL* 581-95-510 (2) 582-60-510 (2)
21 O-RING* 050-90-157 (2) 050-90-162 (2)
22 SEAL SPACER 583-95-255 583-96-255
23 O-RING* 050-90-342 050-90-250
24 BALL* BRASS 080-00-913 1" 080-00-913 1"
25 SEAL MANDREL CAP 583-95-245 583-96-246
26 O-RING* NOT REQ'D 050-90-354
27 SET SCREW*3/8-16 X 3/4" NOT REQ'D 003-C6-012 (2)
28 O-RING* NOT REQ'D NOT REQ'D
*Common repair parts.

Weatherford products and services are subject to Weatherford’s standard terms and
12 of 12 conditions. For more information concerning the full line of Weatherford products and services,
please contact your authorized Weatherford representative. Unless noted otherwise,
trademarks and servicemarks noted herein are the property of Weatherford.

© 2002. Weatherford. All rights reserved.