cc1278_cat07_emer_exit_signs:exit signs 6/11/07 11:17 Page 292

CONVERTALITE

• Fully compatible with high frequency circuits The latest range of Convertalite conversion kits delivers
optimum performance for a diverse choice of fluorescent
• Extensive range, covering a diverse choice of
lamp types and wattages. The new QX series of modules
fluorescent lamps
simplifies the selection of kit for T8 lamps, the same
• Low profile design for easy integration module being suitable for magnetic and high frequency

• Full 5 pole isolation, preventing mains ballast circuits. Each module now has 4 pole output switching

lock-out plus an additional relay pole to isolate the switched live

in emergency mode. Consequently, lock-out of the ballast
• Rapid conversion service
is prevented when it returns to mains mode. Low profile
• EasiCheck central addressable self-test options modules and unique chamfered battery end caps, easing
integration into shallow luminaires, are standard
throughout. All Convertalite kits can be modified to
292 operate with the advanced EasiCheck self-test system.
Emergency - Conversion Kits
cc1278_cat07_emer_exit_signs:exit signs 6/11/07 11:17 Page 293

LAMP OPTIONS OPTIONS

• See selection table • 3 hour duration. Mode of operation dependant on host
luminaire

MATERIALS
• Module case - steel, white finish CONVERSION SERVICE
• Battery end caps - polycarbonate To ensure satisfactory operation, a full conversion service is offered
• Batteries - sealed nickel cadmium by Cooper Lighting and Security. This gives complete peace of
mind that the conversion is carried out and certified to all required
standards, providing:
INSTALLATION NOTES • Total warranty of converted luminaire
• CE marking of converted luminaire. Note: It is a legal
• Suitable for fitting integral to host luminaire, where thermal and
requirement to remove the existing and re-apply a new CE
electro-magnetic test results permit
mark to the luminaire after it has been converted and
• Remote mounting of complete kit, or of batteries only, available.
compliance with CE requirements established
Contact Technical Support for full details
• Conformance to ICEL 1004, when luminaires supplied for
• Supplied complete with low profile end caps for mounting
conversion have BSI Kitemark and F marking 293
batteries and LED with 1000mm lead
• Conversion in a facility that is BS EN ISO9001 approved

DIMENSIONS
SPECIFICATION
W W
To specify state: Electronic emergency conversion kit for fluorescent
L
L lamps with low profile module featuring 4 pole output switching
y le
and additional isolating relay pole, with time delay function to
tter du
Ba Mo prevent lock-out of mains ballast on return to normal mode, suitable
for high frequency and magnetic control gear circuits, sealed nickel
D
D cadmium battery sets, mounted using uniquely profiled end caps
for ease of integration, as Menvier Convertalite range,
Description L (mm) W (mm) D (mm) Fixing Centres (mm) part no. ________
QX/HC/HD/HE modules 216 38 28.5 205
EH modules 216 38 36.5 205

2 cell battery & caps 160 33 33 150 TECHNICAL SPECIFICATION

3 cell battery & caps 220 33 33 210
4 cell battery & caps 280 33 33 270
5 cell battery & caps 340 33 33 330 Supply voltage 230V ± 10%, 50-60 Hz
Supply current 50 mA maximum
Battery charge current 0.25 A nominal
Battery discharge current 1.1 A nominal
Ta (ambient) 50° C
Tc (case) 75° C
Battery cell 1.2V 4AH Ni-cad
Emergency lumen output / BLF See selection table
Normal lumen output Full rated output of lamp (maintained circuits)
Recharge period 24 hour (14 hour for 1 hour duration)

Emergency - Conversion Kits

CONVERTALITE
cc1278_cat07_emer_exit_signs:exit signs 6/11/07 11:17 Page 294

CONVERTALITE
SELECTION TABLE
This table indicates the most suitable choice of module and the corresponding resulting ballast lumen factor with batteries indicated

Lamp Type Conversion Kit Battery Ballast Lumen Lamp Type Conversion Kit Battery Ballast Lumen
(incl batteries) Configuration Factor (BLF) (incl batteries) Configuration Factor (BLF)
Compact Fluorescent Linear Fluorescent
10W 2D BQX18 3 cell 3.6V 0.24 14W T5 (HE) BQX14 3 cell 3.6V 0.14
16W 2D BQX18 3 cell 3.6V 0.18 21W T5 (HE) HC1 4 cell 4.8V 0.09
24W T5 (HO) HE1 6 cell 7.2V 0.08
7W TC BQX18 3 cell 3.6V 0.21
28W T5 (HE) HD2 5 cell 6.0V 0.08
11W TC BQX18 3 cell 3.6V 0.21
35W T5 (HE) HD2 5 cell 6.0V 0.07
10W TC-DE BQX18 3 cell 3.6V 0.19 39W T5 (HO) HE1 6 cell 7.2V 0.07
13W TC-DE BQX18 3 cell 3.6V 0.19 49W T5 (HO) HE1 6 cell 7.2V 0.07
18W TC-DE BQX 3 cell 3.6V 0.10
18W T8 BQX18 3 cell 3.6V 0.14
26W TC-DE BQX 3 cell 3.6V 0.09
294 36W T8 BQX 3 cell 3.6V 0.09
18W TC-T HC1 4 cell 4.8V 0.06 58W T8 CQX 4 cell 4.8V 0.06
26W TC-T HD1 5 cell 6.0V 0.06 70W T8 DQX 5 cell 6.0V 0.05
32W TC-T HD1 5 cell 6.0V 0.06
100W T12 EH 6 cell 7.2V 0.05
42W TC-T HD1 5 cell 6.0V 0.08

18W TC-L BQX18 3 cell 3.6V 0.12

36W TC-L BQX 3 cell 3.6V 0.07
40W TC-L EH 6 cell 7.2V 0.13
55W TC-L EH 6 cell 7.2V 0.10

When performing photometric designs, the K and S lumen reduction factors of 0.85 and 0.85 respectively should be applied. See page 429
for Design Guide.

CATALOGUE NUMBERS

Description Module & Battery Weight

Conversion Kit (kg)
18-36W T8 conversion BQX 0.80
36-65W T8 conversion CQX 1.00
65-70W T8 conversion DQX 1.20
14-21W T5 conversion HC1 1.00
26-42W TC conversion HD1 1.20
28-35W T5 conversion HD2 1.20
24-54W T5(HO) conversion HE1 1.40
40-55W TC conversion EH 1.40
Emergency - Conversion Kits

A wide range of enclosures for remotely mounting the module & battery, or batteries only, are available. Contact Technical Support for full
details.