SBR_FAHRER_1 Module Function value 2008 Description

Enables the parked car ventilation option, just set to aktiv. Tested on non-idrive professional HU. Gives you 2 programmable
timers to set when you would like the cabin fan to switch on.
2RAD STANDHEIZUNG X

Seat Belt Chime (Driver) ABG SBR_FAHRER_1 X Disables seat belt chime for driver side
Seat Belt Chime
(Passenger) ABG SBR_BEIFAHRER_1 X Disables seat belt chime for passenger side
Key Fob Ejected from When turning the engine off key fob will be ejected from socket. (Need to hold start/stop for extra 2 seconds) -- Does this
Socket upon Engine Stop CAS KOMFORT_EJECT X prevent the door from chiming if you leave the key in the slot?
Unlocks all doors when you remove key (2009: Only unlocks driver door if FOB set to unlock driver door only. Set FOB to
unlock all doors, and this will unlock all doors, too) (also works with Comfort Access when engine is shut off, might need
KOMFORT_EJECT activated) **Automatic door lock when you drive off must be enabled and must be the reason the doors
locked for this feature to work, i.e. if you press the Central Lock button before the drive-off lock kicks in, the doors will not auto-
Unlock Doors CAS ER_KEYOUT_AUTOVR X unlock.
Close Windows/Roof with
Fob CAS KOMFORTSCHLIESSUNG_FB X Closes windows + moon roof through Key Fob
Enables panic alarm. Must have alarm installed. Hold trunk botton on FOB for 5 secs to activate. Change from "nicht_aktiv"
Panic Mode CAS SONDERTASTE_PANIKALARM X to "panikalarm"
Disable Auto Dim Mirrors CAS SPIEGEL_ELEKTROCHROM X Switch to nicht_aktiv
Alarm beep on lock DWAI QUIT_AKUST_SCHAERF X Alarm beep on lock (one beep) (must have alarm installed)
Disable windows safety Opening doors will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling
feature FRM (NFRM) TUERAUF_STOP_MAUT X up, it will stop the operation. This feature disables it.
Disables side marker/signal light when headlights are on. Change the value to "nicht_aktiv". Module value might be longer
than SIDEMARKER_US. Here are some examples: SIDEMARKER_US_NFRM, SIDEMARKER_US_NF, or
SIDEMARKER_US_MIT_FRA_V. On some cars disabling this one value is enough to turn off everything and making the
changes below will also disable your angel eyes, so check after making this one change and only continue if you find your side
Side Marker Delete FRM (NFRM) SIDEMARKER_US (see Note) X markers are still on.
SPIEGEL_KOMFORT_EINKLAPP Fold side mirrors with FOB (CA also works 2009/01 E92). Requires that CAS > KOMFORTSCHLIESSUNG_FB also be set to
Fold mirrors w/ FOB FRM (NFRM) or ASP_KOMFORT_EINKLAPP X aktiv. Mirrors folded with the button inside the car cannot be unfolded via the FOB.
Bulb Testing Warning FRM (NFRM) KALTUEBERWACHUNG_BLK_HI X Cold testing bulbs in turn signal rear - change setting to nicht_aktiv
Bulb Testing Warning FRM (NFRM) KALTUEBERWACHUNG_BLK_VO X Cold testing bulbs in turn signal - change setting to nicht_aktiv
Bulb Testing Warning FRM (NFRM) KALTUEBERWACHUNG_KZL X Cold testing bulbs in number plate - change setting to Nnicht_aktiv
Bulb Testing Warning FRM (NFRM) KALTUEBERWACHUNG_NSW X Cold testing bulbs in reversing light - change setting to nicht_aktiv
Bulb Testing Warning FRM (NFRM) KALTUEBERWACHUNG_RL X
Warm testing bulbs in number plate light bulb - change setting to nicht_aktiv (For my 2006, it was just
Bulb Testing Warning FRM (NFRM) WARMUEBERWACHUNG_KZL_LI X WARMUEBERWACHUNG_KZL)
Disables the Daytime Running Lights (DRL) on Canadian models. This is sub-module FRM, my car did not have an NFRM
Disable DRLs FRM (NFRM) DRL_V_GEDIMMT X sub-module.
Right Parking lamp
malfunction error message FRM (NFRM) FEHLERMELDUNG_CC_SL_V_R X remove the warning from your BMW idrive when you install HID's or angel eyes
Auto Dimming Mirrors FRM (NFRM) SPIEGEL_ELEKTROCHROM X nicht_aktiv to turn off autodim mirror or aktiv to enable mirror
Bulb Testing Warning FRM (NFRM) WARMUEBERWACHUNG_BLK_HI X Warm testing bulbs in rear turn signals - change setting to nicht_aktiv
Warm testing bulbs in number plate light bulb - change setting to nicht_aktiv (For my 2006, it was just
Bulb Testing Warning FRM (NFRM) WARMUEBERWACHUNG_KZL_LI X WARMUEBERWACHUNG_KZL)
PWM_FRA_V_FKT_SIDEMARKER
Corner Activate on French and
E87 FRM (NFRM) SIDEMARKER_US_MIT_FRA_V X You must set PWM_FRA_V_FKT_SIDEMARKER to wert_02 and SIDEMARKER_US_MIT_FRA_V to aktiv.
Climate don't turn ON in
Auto mode IHK KLIMA_MIT_AUTO_0 X Set to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
Climate don't turn ON in
Auto mode IHK KLIMA_MIT_AUTO_1 X Set to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
Climate don't turn ON in
Auto mode IHK KLIMA_MIT_AUTO_10/15 X Set to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
Climate don't turn ON in
Auto mode IHK KLIMA_MIT_AUTO_2 X Set to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
Climate don't turn ON in
Auto mode IHK KLIMA_MIT_AUTO_0 X Set to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
Climate don't turn ON in
Auto mode IHK KLIMA_MIT_AUTO_1 X Set to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
Climate don't turn ON in
Auto mode IHK KLIMA_MIT_AUTO_10/15 X Set to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
Climate don't turn ON in
Auto mode IHK KLIMA_MIT_AUTO_2 X Set to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
Wiper wipes to End
position after turning
engine off JBBF (2JBBF) ZYCLUS_VOLLEND_KLR_AUS X When Wiper is Wiping, and you turn engine off, it will now keep on going until it returns to the home (bottom) position.
LICHT_AUT_WERT_1, Set all 3 to aktiv, change the sensitivity of your automatic light sensor in your Dash! Only works if you do NOT have iDrive. If
Auto Headlight Sensitivity LICHT_AUT_WERT_2, you have CCC iDrive, see the option higher up in the spreadsheet. If you have CIC iDrive, there is not yet a known way to do
adjustment from BC Button KOMBI LICHT_AUT_WERT_3 X this.

Digital Speed KOMBI BC_DIGITAL_V X Displays digital speed in cluster

Door Dong KOMBI CC_ZUENDSCHLUESSEL X Disables dong when driver's door is open and key is in slot.
Instant MPG KOMBI DIGITAL_KVA X Displays digital instant-read MPG in cluster
Display cruise control set Change the value from wert_01 to wert_02 On vehicles that do not briefly indicate the speed the cruise control is set at,
speed KOMBI TEMPOMAT_SETZ_ANZ_DAUER X changing this value will enable the display.
SITZ_AUT_VERST_AUS,
Driver seat memory SITZ_AUT_VERST_ENT and Enable driver seat memory options in cluster when retrofiting powered seats (3 parameters must be aktiv) + VO $459 added to
options in cluster KOMBI SITZ_AUT_VERST_ENT_T X CAS and FRM
Display cruise control set Change the value from wert_1 to wert_2 On vehicles that do not briefly indicate the speed the cruise control is set at, changing
speed KOMBI TEMPOMAT_SETZ_ANZ_DAUER X this value will enable the display.
Enable SMS management Enable SMS management from RAD2. Change nicht_akitv to aktiv. Note: RAD2 prod date 2010, MULF2 High Basis SVS prod.
from Professional Radio RAD2 SMS_RAD2 X date 2009, installed on e91 2006.
Auto wipers have be on for this to work. Once it closes, you wont be able to re-open sunroof until car power down for about 10
Rain Close from full open SHD (FZD) REGENSCHLIESSEN X minutes. spaz (CasperSYTFU Verified 07 E92)
Rain Close Sunroof from
Tilt SHD (FZD) REGENSCHLIESSENTILT X (CasperSYTFU Verified 07 E92)
This is for those installing OEM xenons without the self leveling feature. Add $522 to VO (telling the car your adding xenon
headlights). Disable self leveling for xenon headlights by saying nicht_aktiv to line AUTO_LWR_ENABLE (in FRM). To enable
inner halogen light as high beam (in FRM):

PWM_ANST_FL_BIXENON
wert_01
wert_01
VO in FA string
Xenon retrofit (see notes) 522 X More details: http://www.e90post.com/forums/showpost.php?p=8982434&postcount=1666
Disable iDrive Legal
Disclaimer CIC LEGAL_DISCLAIMER_TIME Set to "kein_ld" to disable the disclaimer.
Restore "DSC Off" option
in M Drive (M3s) CIC DSC_OFF_CIC Newer M3s removed the option to disable DSC completely via M Drive. This restores that option.
Alarm beep on unlock DWAI QUIT_AKUST_ENTSCH Alarm beep on unlock (two beeps) (must have alarm installed)
 Requires active head lamps, may also require FRM3 module. Set this to "aktiv" to enable Variable Light Distribution. When
enabled and the head lamp switch is in the Auto position, at lower speeds the head lamps will project a wider, shallower beam,
and at high speeds they will project a longer, narrower beam. To test functionality, point the head lamps toward a wall and start
Euro Adaptive Head the engine; Ignition On is not sufficient. Then first switch the head lamps to the "normal" low beam setting (not Auto). When
Lamps (aka AHL2 or the low beams complete their self-leveling routine, switch to the Auto setting. The driver's side lamp should move noticeably
Variable Light Distribution) NFRM AHL2_ENABLE down and outward.
Pathway Lighting via Trunk When set to aktiv, pathway lighting (head lamps, tail lights, side markers) is temporarily switched on while the car is off by
fob button NFRM HEIMLEUCHTEN_FUNKSCHL pressing the Trunk button on the fob.
ENABLE_GURTBRINGER_FA or
Seat Belt Butler (E92s) NFRM ENABLE_GURTBRINGER_BF Set to nicht_aktiv to disable for the driver (FA) and/or passenger (BF)
Set DRLs to angel eyes or
High Beams NFRM VERHALTEN_DRL_TFL Set to "drl_s" for angel eyes and "drl_h" for high beams.
Auto Start/Stop On M3s equipped with Auto Start/Stop, setting this to "aktiv" will cause Auto Start/Stop to start up in its previous state when the
remembers last state IHK MSA_MEMORY engine is started, rather than always defaulting to on or off (depending on region).
REST feature on cars with Enabling this will switch your ALL button back to a REST button; see http://www.e90post.com/forums/showthread.php?
ALL button IHK REST_TASTE_VERBAUT" t=497347 for more information.
Instrument Cluster Lighting
Always On KOMBI M_TAG_SKALENBELEUCHTUNG Set to "aktiv" to keep your instrument cluster lighting on even when your head lamps are off.
Fuel tank reserve warning C08_TANK_SCHWELLE_RESERV
level KOMBI E Set to wert_01 to have the fuel reserve warning show up at 1/8 full rather than 1/4 (tested on an 2011 M3)
MDYNAMIC_MODE_USA;
US_VEHICLE;
M3_UEBERSTEUERN_MUE_0; Euro MDM allows more wheelspin and sliding than the US calibration. To enable it, the first two settings should be set to
M3_UEBERSTEUERN_MUE_1_2_ "nicht_aktiv". The next two are based on your chassis and whether you want Euro or US mode: wert_00 for Euro E90; wert_01
Euro MDM (for M3s) M3DSC M for US E90; wert_02 for Euro E92; wert_03 for US E92; wert_04 for Euro E93; wert_05 for US E93
Tested on a 2011 E92 M3. Default is "aktiv", but when set to "nicht_aktiv", the DSC Off button is deactivated, i.e. it is not
Disable "DSC Off" button M3DSC ABSCHALTBARKEIT_DSC possible to turn DSC completely off. MDM can still be used, however.