***************************************************************************

* *
* PLS-POLE *
* POLE AND FRAME ANALYSIS AND DESIGN *
* Copyright Power Line Systems 1999-2019 *
* *
***************************************************************************

Successfully performed nonlinear analysis

The model has 0 warnings.

Modeling options:
Offset Arms from Pole/Mast: Yes
Offset Braces from Pole/Mast: Yes
Offset Guys from Pole/Mast: Yes
Offset Posts from Pole/Mast: Yes
Offset Strains from Pole/Mast: Yes
Use Alternate Convergence Process: No
Steel poles and tubular arms checked with ASCE/SEI 48-11

Default Modulus of Elasticity for Steel = 199947.60 (MPa)

Default Weight Density for Steel = 76972.84 (N/m^3)

Steel Pole Properties:

Steel Pole Stock Length Default Base Shape Tip Base Taper Default Tubes Modulus of Weight Shape Strength Distance Ultimate Ultimate Texture
Property Number Embedded Plate Diameter Diameter Drag Elasticity Density At Check From Trans. Long.
Label Length Coef. Override Override Base Type Tip Load Load
(m) (m) (mm) (mm) (mm/m) (MPa) (N/m^3) (m) (kN) (kN)

P a g e 1 | 10
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
9m-650daN 9.00 1.4 No 8F 130 340 0 1.3 1 tube 210000 77008.5 8F Calculated 0.000 0.0000 0.0000 Galvanized Steel

Steel Tubes Properties:

Pole Tube Length Thickness Lap Lap Lap Gap or Yield Moment Cap. Tube Center of Calculated Tube Top Tube Bot. 1.5x Diam. Actual
Property No. Length Factor Butt Offset Stress Override Weight Gravity Taper Diameter Diameter Lap Length Overlap
(m) (cm) (m) (mm) (MPa) (kN-m) (N) (m) (mm/m) (cm) (cm) (m) (m)
------------------------------------------------------------------------------------------------------------------------------------------------
9m-650daN 1 9 0.4 0.000 0.000 0.000 350.000 0.000 2122 5.18 23.33333 13.00 34.00 0.000 0.000

Steel Pole Connectivity:

Pole Tip Base X of Y of Z of Inclin. Inclin. Property Attach. Base Embed % Embed C.
Label Joint Joint Base Base Base About X About Y Set Labels Connect Override Override
(m) (m) (m) (deg) (deg) (m)
--------------------------------------------------------------------------------------------------
A 0 0 0 0 0 9m-650daN 1 labels Fixed 0.00 0

Relative Attachment Labels for Steel Pole "A":

Joint Distance From Global Z

Label Origin/Top Joint of Attach
(m) (m)
------------------------------------------
A:1 0.25 0.00

P a g e 2 | 10
Pole Steel Properties:

Element Joint Joint Rel. Outer Area T-Moment L-Moment D/t W/t Fy Fa T-Moment L-Moment
Label Label Position Dist. Diam. Inertia Inertia Max. Min. Capacity Capacity
(m) (cm) (cm^2) (cm^4) (cm^4) (MPa) (MPa) (kN-m) (kN-m)
---------------------------------------------------------------------------------------------------------
A A:t A:t Ori 0.00 13.00 16.70 350.74 350.74 0.00 9.3 350.00 350.00 18.89 18.89
A A:1 A:1 End 0.25 13.58 17.47 401.71 401.71 0.00 9.9 350.00 350.00 20.70 20.70
A A:1 A:1 Ori 0.25 13.58 17.47 401.71 401.71 0.00 9.9 350.00 350.00 20.70 20.70
A #A:0 Tube 1 End 1.77 17.14 22.19 822.05 822.05 0.00 13.6 350.00 350.00 33.57 33.57
A #A:0 Tube 1 Ori 1.77 17.14 22.19 822.05 822.05 0.00 13.6 350.00 350.00 33.57 33.57
A #A:1 Tube 1 End 3.30 20.70 26.90 1464.85 1464.85 0.00 17.3 350.00 350.00 49.55 49.55
A #A:1 Tube 1 Ori 3.30 20.70 26.90 1464.85 1464.85 0.00 17.3 350.00 350.00 49.55 49.55
A #A:2 Tube 1 End 4.82 24.25 31.61 2377.36 2377.36 0.00 21.0 350.00 350.00 68.62 68.62
A #A:2 Tube 1 Ori 4.82 24.25 31.61 2377.36 2377.36 0.00 21.0 350.00 350.00 68.62 68.62
A #A:3 Tube 1 End 6.21 27.49 35.91 3483.93 3483.93 0.00 24.3 350.00 350.00 88.71 88.71
A #A:3 Tube 1 Ori 6.21 27.49 35.91 3483.93 3483.93 0.00 24.3 350.00 350.00 88.71 88.71
A A:g A:g End 7.60 30.73 40.21 4889.58 4889.58 0.00 27.7 350.00 350.00 111.37 111.37

*** Insulator Data

P a g e 3 | 10
Clamp Properties:

Label Stock Holding Hardware Notes

Number Capacity Capacity
(N) (N)
---------------------------------------
Type #1 5e+05 0

Clamp Insulator Connectivity:

Clamp Structure Property Min. Required

Label And Tip Set Vertical Load
Attach (uplift)
(N)
---------------------------------------
S A:1 Type #1 No Limit

P a g e 4 | 10
*** Loads Data

Structure Height Summary (used for calculating wind/ice adjust with height):
Z of ground for wind height adjust 0.00 (m) and structure Z coordinate that will be put on the centerline ground profile in PLS-CADD.
Ground elevation shift 0.00 (m)
Z of ground with shift 0.00 (m)
Z of structure top (highest joint) 7.60 (m)
Structure height 7.60 (m)
Structure height above ground 7.60 (m)

Vector Load Cases:

Load Case Dead Wind SF for SF for SF for SF for SF for SF for SF for SF for SF for SF for SF For Point Wind/Ice Trans. Longit. Ice Ice Temperature Pole Pole
Description Load Area Steel Poles Wood Conc. Conc. Conc. Guys Non Braces Insuls. Hardware Found. Loads Model Wind Wind Thick. Density Deflection Deflection
Factor Factor Tubular Arms Poles Ult. First Zero and Tubular Pressure Pressure Check Limit
and Towers Crack Tens. Cables Arms (Pa) (Pa) (cm) (N/m^3) (deg C) % or (m)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Working 1.1000 1.0000 1.00000 1.0000 0.0000 0.0000 1.0000 1.0000 1.0000 1.0000 1.0000 0.0000 1.0000 1 load Wind on All 1350 0 0.000 0.000 0.0 % Pole Height 5
Ultimate(1.8) 1.8000 1.0000 1.00000 1.0000 0.0000 0.0000 1.0000 1.0000 1.0000 1.0000 1.0000 0.0000 1.0000 1 load Wind on All 2430 0 0.000 0.000 0.0 % Pole Height 8

Point Loads for Load Case "Working":

Joint Vertical Transverse Longitudinal Load

Label Load Load Load Comment
(N) (N) (N)
-----------------------------------------------
A:1 3000 6500 0

Point Loads for Load Case "Ultimate(1.8)":

Joint Vertical Transverse Longitudinal Load

Label Load Load Load Comment
(N) (N) (N)
-----------------------------------------------
A:1 3000 11700 0 FOS=1.8

P a g e 5 | 10
*** Analysis Results:

Maximum element usage is 94.16% for Steel Pole "A" in load case "Ultimate(1.8)"
Maximum insulator usage is 2.42% for Clamp "S" in load case "Ultimate(1.8)"
Maximum pole deflection usage is 54.47% for "A" in load case "Ultimate(1.8)"

*** Analysis Results for Load Case No. 1 "Working" - Number of iterations in SAPS 11

Equilibrium Joint Positions and Rotations for Load Case "Working":

Joint X-Displ Y-Displ Z-Displ X-Rot Y-Rot Z-Rot X-Pos Y-Pos Z-Pos
Label (m) (m) (m) (deg) (deg) (deg) (m) (m) (m)
-------------------------------------------------------------------------------

P a g e 6 | 10
 A:g 0 0 0 0.0000 0.0000 0.0000 0 0 0
A:t 7.7e-05 0.1841 -0.002993 -2.5205 0.0009 0.0000 7.7e-05 0.1841 7.597
A:1 7.313e-05 0.1731 -0.002751 -2.5204 0.0009 0.0000 7.313e-05 0.1731 7.347

Joint Support Reactions for Load Case "Working":

Joint X X Y Y H-Shear Z Comp. Uplift Result. Result. X X-M. Y Y-M. H-Bend-M Z Z-M. Max.
Label Force Usage Force Usage Usage Force Usage Usage Force Usage Moment Usage Moment Usage Usage Moment Usage Usage
(kN) % (kN) % % (kN) % % (kN) % (kN-m) % (kN-m) % % (kN-m) % %
--------------------------------------------------------------------------------------------------------------------------------
A:g -0.01 0.0 -9.41 0.0 0.0 -4.89 0.0 0.0 10.61 0.0 58.00 0.0 -0.0 0.0 0.0 -0.00 0.0 0.0

Detailed Steel Pole Usages for Load Case "Working":

Element Joint Joint Rel. Trans. Long. Vert. Trans. Mom. Long. Mom. Tors. Axial Tran. Long. P/A M/S. V/Q. T/R. Res. Max. At
Label Label Position Dist. Defl. Defl. Defl. (Local Mx) (Local My) Mom. Force Shear Shear Usage Pt.
(m) (cm) (cm) (cm) (kN-m) (kN-m)(kN-m) (kN) (kN) (kN) (MPa) (MPa) (MPa) (MPa) (MPa) %
------------------------------------------------------------------------------------------------------------------------------------------------
A A:t Origin 0.00 18.41 0.01 -0.30 -0.00 -0.00 -0.0 -0.02 0.03 -0.00 -0.01 0.00 0.04 0.00 0.07 0.0 4
A A:1 End 0.25 17.31 0.01 -0.28 0.01 -0.00 -0.0 -0.02 0.03 -0.00 -0.01 0.13 0.01 0.00 0.14 0.0 2
A A:1 Origin 0.25 17.31 0.01 -0.28 0.01 -0.00 -0.0 -2.89 6.89 -0.00 -1.65 0.00 8.20 0.00 14.31 4.1 4
A Tube 1 End 1.77 10.92 0.01 -0.14 10.51 -0.00 -0.0 -2.89 6.89 -0.00 -1.30 109.55 2.49 0.00 110.94 31.7 2
A Tube 1 Origin 1.77 10.92 0.01 -0.14 10.51 -0.00 0.0 -3.24 7.33 -0.00 -1.46 109.55 2.65 0.00 111.11 31.7 2
A Tube 1 End 3.30 5.85 0.00 -0.05 21.68 -0.01 0.0 -3.24 7.33 -0.00 -1.20 153.18 2.18 0.00 154.43 44.1 2
A Tube 1 Origin 3.30 5.85 0.00 -0.05 21.68 -0.01 0.0 -3.66 7.86 -0.00 -1.36 153.18 2.33 0.00 154.60 44.2 2
A Tube 1 End 4.82 2.38 0.00 -0.01 33.66 -0.01 0.0 -3.66 7.86 -0.00 -1.16 171.70 1.98 0.00 172.90 49.4 2
A Tube 1 Origin 4.82 2.38 0.00 -0.01 33.66 -0.01 0.0 -4.13 8.44 -0.01 -1.31 171.70 2.13 0.00 173.05 49.4 2
A Tube 1 End 6.21 0.59 0.00 -0.00 45.39 -0.02 0.0 -4.13 8.44 -0.01 -1.15 179.11 1.87 0.00 180.29 51.5 2
A Tube 1 Origin 6.21 0.59 0.00 -0.00 45.39 -0.02 0.0 -4.63 9.08 -0.01 -1.29 179.11 2.01 0.00 180.43 51.6 2
A A:g End 7.60 0.00 0.00 0.00 58.00 -0.04 0.0 -4.63 9.08 -0.01 -1.15 182.31 1.79 0.00 183.49 52.4 2

Summary of Clamp Capacities and Usages for Load Case "Working":

Clamp Force Input Factored Holding Input Factored Hardware Max.

Label Holding Holding Usage Hardware Hardware Usage Usage
Capacity Capacity Capacity Capacity
(kN) (kN) (kN) % (kN) (kN) % %
------------------------------------------------------------------------
S 7.159 500.00 500.00 1.43 0.00 0.00 0.00 1.43

P a g e 7 | 10
*** Analysis Results for Load Case No. 2 "Ultimate(1.8)" - Number of iterations in SAPS 11

Equilibrium Joint Positions and Rotations for Load Case "Ultimate(1.8)":

Joint X-Displ Y-Displ Z-Displ X-Rot Y-Rot Z-Rot X-Pos Y-Pos Z-Pos
Label (m) (m) (m) (deg) (deg) (deg) (m) (m) (m)
-------------------------------------------------------------------------------
A:g 0 0 0 0.0000 0.0000 0.0000 0 0 0
A:t 7.687e-05 0.3311 -0.009586 -4.5342 0.0009 0.0000 7.687e-05 0.3311 7.59
A:1 7.301e-05 0.3113 -0.008804 -4.5341 0.0009 0.0000 7.301e-05 0.3113 7.341

Joint Support Reactions for Load Case "Ultimate(1.8)":

Joint X X Y Y H-Shear Z Comp. Uplift Result. Result. X X-M. Y Y-M. H-Bend-M Z Z-M. Max.
Label Force Usage Force Usage Usage Force Usage Usage Force Usage Moment Usage Moment Usage Usage Moment Usage Usage
(kN) % (kN) % % (kN) % % (kN) % (kN-m) % (kN-m) % % (kN-m) % %
---------------------------------------------------------------------------------------------------------------------------------
A:g -0.01 0.0 -16.93 0.0 0.0 -6.20 0.0 0.0 18.03 0.0 104.38 0.0 -0.0 0.0 0.0 -0.00 0.0 0.0

Detailed Steel Pole Usages for Load Case "Ultimate(1.8)":

Element Joint Joint Rel. Trans. Long. Vert. Trans. Mom. Long. Mom. Tors. Axial Tran. Long. P/A M/S. V/Q. T/R. Res. Max. At
Label Label PositionDist. Defl. Defl. Defl. (Local Mx) (Local My) Mom. Force Shear Shear Usage Pt.
(m) (cm) (cm) (cm) (kN-m) (kN-m)(kN-m) (kN) (kN) (kN) (MPa) (MPa) (MPa) (MPa) (MPa) %
------------------------------------------------------------------------------------------------------------------------------------------------
A A:t Origin 0.00 33.11 0.01 -0.96 -0.00 0.00 -0.0 -0.03 0.05 -0.00 -0.02 0.00 0.07 0.00 0.12 0.0 4
A A:1 End 0.25 31.13 0.01 -0.88 0.01 -0.00 -0.0 -0.03 0.05 -0.00 -0.02 0.23 0.03 0.00 0.25 0.1 2
A A:1 Origin 0.25 31.13 0.01 -0.88 0.01 -0.00 -0.0 -2.38 12.39 -0.00 -1.36 0.00 14.75 0.00 25.58 7.3 4
A Tube 1 End 1.77 19.64 0.00 -0.45 18.89 -0.00 -0.0 -2.38 12.39 -0.00 -1.07 196.91 4.48 0.00 198.14 56.6 2
A Tube 1 Origin 1.77 19.64 0.00 -0.45 18.89 -0.00 0.0 -3.04 13.20 -0.00 -1.37 196.91 4.77 0.00 198.46 56.7 2
A Tube 1 End 3.30 10.52 0.00 -0.17 39.00 -0.01 0.0 -3.04 13.20 -0.00 -1.13 275.50 3.92 0.00 276.72 79.1 2
A Tube 1 Origin 3.30 10.52 0.00 -0.17 39.00 -0.01 0.0 -3.87 14.15 -0.00 -1.44 275.50 4.20 0.00 277.04 79.2 2
A Tube 1 End 4.82 4.29 0.00 -0.04 60.57 -0.01 0.0 -3.87 14.15 -0.00 -1.22 308.95 3.57 0.00 310.23 88.6 2
A Tube 1 Origin 4.82 4.29 0.00 -0.04 60.57 -0.01 0.0 -4.76 15.20 -0.01 -1.51 308.95 3.83 0.00 310.53 88.7 2
A Tube 1 End 6.21 1.07 0.00 -0.01 81.69 -0.02 0.0 -4.76 15.20 -0.01 -1.33 322.33 3.37 0.00 323.71 92.5 2
A Tube 1 Origin 6.21 1.07 0.00 -0.01 81.69 -0.02 0.0 -5.70 16.34 -0.01 -1.59 322.33 3.62 0.00 323.98 92.6 2
A A:g End 7.60 0.00 0.00 0.00 104.38 -0.04 0.0 -5.70 16.34 -0.01 -1.42 328.09 3.23 0.00 329.55 94.2 2

Summary of Clamp Capacities and Usages for Load Case "Ultimate(1.8)":

Clamp Force Input Factored Holding Input Factored Hardware Max.

Label Holding Holding Usage Hardware Hardware Usage Usage
Capacity Capacity Capacity Capacity
(kN) (kN) (kN) % (kN) (kN) % %
-------------------------------------------------------------------------
S 12.078 500.00 500.00 2.42 0.00 0.00 0.00 2.42

P a g e 8 | 10
*** Overall summary for all load cases - Usage = Maximum Stress / Allowable Stress

Summary of Steel Pole Usages:

Steel Pole Maximum Load Case Height Segment Weight

Label Usage % AGL (m) Number (N)
---------------------------------------------------------
A 94.16 Ultimate(1.8) 0.7 6 2122.1

*** Maximum Stress Summary for Each Load Case

Summary of Maximum Usages by Load Case:

Load Case Maximum Element Element

Usage % Label Type
-----------------------------------------
Working 52.43 A Steel Pole
Ultimate(1.8) 94.16 A Steel Pole

Summary of Steel Pole Usages by Load Case:

Load Case Maximum Steel Pole Height Segment

Usage % Label AGL (m) Number
--------------------------------------------------
Working 52.43 A 0.7 6
Ultimate(1.8) 94.16 A 0.7 6

Summary of Insulator Usages:

Insulator Insulator Maximum Load Case Weight

Label Type Usage % (N)
-------------------------------------------------
S Clamp 2.42 Ultimate(1.8) 0.0

Summary of Tip Deflections For All Load Cases:

Note: positive tip load results in positive deflection

Load Case Joint Long. Tran. Vert. Resultant Long. Tran. Twist
Label Defl. Defl. Defl. Defl. Rot. Rot.
(cm) (cm) (cm) (cm) (deg) (deg) (deg)
------------------------------------------------------------------
Working A:t 0.01 18.41 -0.30 18.41 0.00 -2.52 0.00
Ultimate(1.8) A:t 0.01 33.11 -0.96 33.12 0.00 -4.53 0.00

Pole Deflection Usages For All Load Cases:

Pole Load Case Deflection Deflection Height Length Tip Allowable Actual Deflection From Usage
Label Check Limit Diameter Deflection Deflection Vertical Axis
% (m) (m) (cm) (m) (m) (m) %
----------------------------------------------------------------------------------------------------------------
A Working % Pole Height 5.00 7.60 9.00 13.00 0.38 0.18 0.18 48.45
A Ultimate(1.8) % Pole Height 8.00 7.60 9.00 13.00 0.61 0.33 0.33 54.47

Loads At Insulator Attachments For All Load Cases:

Load Insulator Insulator Structure Structure Structure Structure Structure

Case Label Type Attach Attach Attach Attach Attach
Label Load X Load Y Load Z Load Res.

P a g e 9 | 10
 (kN) (kN) (kN) (kN)
------------------------------------------------------------------------------------
Working S Clamp A:1 0.000 6.500 3.000 7.159
Ultimate(1.8) S Clamp A:1 0.000 11.700 3.000 12.078

Overturning Moments For User Input Concentrated Loads:

Moments are static equivalents based on central axis of 0,0 (i.e. a single pole).

Load Case Total Total Total Transverse Longitudinal Torsional

Tran. Long. Vert. Overturning Overturning Moment
Load Load Load Moment Moment
(kN) (kN) (kN) (kN-m) (kN-m) (kN-m)
----------------------------------------------------------------------
Working 6.500 0.000 3.000 47.775 0.000 0.000
Ultimate(1.8) 11.700 0.000 3.000 85.995 0.000 0.000

*** Weight of structure (N):

Weight of Steel Poles: 2122.1
Total: 2122.1

*** End of Report

P a g e 10 | 10