Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
219 views

Struc Analysis Assignment

This document contains 10 problems related to structural analysis using methods like slope deflection, moment distribution, and virtual work. The problems involve calculating reactions, drawing shear and bending moment diagrams, determining displacements and rotations of beams, frames, and continuous structures. Beam properties like EI are provided. The document asks to solve the problems using different structural analysis techniques.

Uploaded by

rameshbabu_1979
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
219 views

Struc Analysis Assignment

This document contains 10 problems related to structural analysis using methods like slope deflection, moment distribution, and virtual work. The problems involve calculating reactions, drawing shear and bending moment diagrams, determining displacements and rotations of beams, frames, and continuous structures. Beam properties like EI are provided. The document asks to solve the problems using different structural analysis techniques.

Uploaded by

rameshbabu_1979
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Assignment 1

5/8/2015

1. Draw the quantitative shear and bending moment diagrams for the
beam shown in following figure. EI is constant. Use Slope Deflection
method

2. Draw the quantitative shear and bending moment diagrams, for the
beam shown. Support B settles 10 mm, and EI is constant. Take E =
200 GPa, I = 200x106 mm6. Slope Deflection method

3. For the frame shown, use the slope-deflection method to


(a) Determine the end moments of each member and reactions at
supports.
(b)Draw the quantitative bending moment diagram.

4. From the frame shown use the slope-deflection method to:


(a) Determine the end moments of each member and reactions at
supports
(b)Draw the quantitative bending moment diagram

1 | Page

5. Draw the quantitative shear, bending moment diagrams for the frame
shown using Slope Deflection method. E = 200 GPa.

6. Analyse the beam as shown in following figure with constant EI using


Clapeyrons three moment equation.

7. Using Clapeyrons theorem, solve the problem of the continuous beam


as shown
in figure. EI is constant throughout.

8. A continuous beam has overhangs on both sides as shown in below


diagram.
Apply three moment equation to determine the support moments. EI is
constant throughout.

2 | Page

9. Analyse the three span continuous ABCD with overhang DE for the
loading, end conditions , spans , flexural rigidity as shown in following
figure by applying theorem of three moments. Draw the shear force
and bending moment diagrams if support B and C settle by 5mm and
10mm. EI = 80,000 KN m2

10.
Find the support moments and reactions for the following
continuous beam. Take Ei as constant.

1. A simply supported beam AB is hinged at A and supported by roller at


B. A moment MB is applied at B. Determine the rotations at A and B
due to applied moment MB. Use the method of virtual work.
(A)
3 | Page

2. Write down the equations stating strain energy stored in a member


due to bending. (R)
3. What do you understand by dummy load method?
(U)
4. Write Maxwells law of reciprocal deflections.
(R)
5. Find the fixed end moments for the following beam
(A)

Part B
40)

(8 +16 +16 =

6A)Determine the displacement at point B of a steel beam E = 200 Gpa , I =


500(106) mm4
(A)

(Or)
6(B) A cantilever beam ABC is fixed at A and rigidly propped at C and is
loaded as shown in the following figure. Find the reaction at C
(A)

4 | Page

7 A) Determine the horizontal displacement of point C on the frame and


draw the bending moment diagram . E = 200 GPa I = 200(106) mm4
(A)

(Or)
7 B) Determine the slope and displacement of point B of the steel beam
shown in the figure below. Take E = 200 GPa, I = 60(106) mm4.
(A)

8A)From the structure shown. Determine the displacement at C. Take E =


200 GPa, I = 200(106) mm4.
(A)
5 | Page

(Or)
8B) Calculate the vertical deflection of the joint B. The cross-sectional area of
each member is 1800 mm2 and Youngs modulus, E, for the material of the
members is 200 OOO N/mm2. (A)

6 | Page

You might also like