This document provides a summary of a coating inspection of pump foundations at a site. It notes the tag number, system and subsystem numbers, description of what was coated, references, date and time of inspection, ambient temperature, surface temperature, coating specification, application method, manufacturer, batch number and expiry date. It also summarizes the surface preparation, number of coats, curing time between coats, coverage, surface cleanliness, and notes there were no repairs needed and no re-inspection required. The inspection was completed, accepted and approved on the dates noted.
This document provides a summary of a coating inspection of pump foundations at a site. It notes the tag number, system and subsystem numbers, description of what was coated, references, date and time of inspection, ambient temperature, surface temperature, coating specification, application method, manufacturer, batch number and expiry date. It also summarizes the surface preparation, number of coats, curing time between coats, coverage, surface cleanliness, and notes there were no repairs needed and no re-inspection required. The inspection was completed, accepted and approved on the dates noted.
This document provides a summary of a coating inspection of pump foundations at a site. It notes the tag number, system and subsystem numbers, description of what was coated, references, date and time of inspection, ambient temperature, surface temperature, coating specification, application method, manufacturer, batch number and expiry date. It also summarizes the surface preparation, number of coats, curing time between coats, coverage, surface cleanliness, and notes there were no repairs needed and no re-inspection required. The inspection was completed, accepted and approved on the dates noted.
This document provides a summary of a coating inspection of pump foundations at a site. It notes the tag number, system and subsystem numbers, description of what was coated, references, date and time of inspection, ambient temperature, surface temperature, coating specification, application method, manufacturer, batch number and expiry date. It also summarizes the surface preparation, number of coats, curing time between coats, coverage, surface cleanliness, and notes there were no repairs needed and no re-inspection required. The inspection was completed, accepted and approved on the dates noted.
System No. 800-4501-CV Subsystem No. 800-4501-CV-022 Description PUMP FOUNDATION - 713-P-401A/B, 713-P-402A/B/C & 713-P-403A/B/C - FIRE WATER AREA Drawing Reference / Rev.
No. Description of Task
Information and Inspection Date Time Ambient Temperature 25C Foundation to be Coated. 28.02.2021 @ 9.30 AM Temperature of Surface to be 11C Coated. Coating Specification. 9686-8320-SP-000-4501-Cl 4.1.3 Method of Coating Application. Roller application Coating Manufacturer HENKEL Coating Batch No. Batch Expiry SBP 200191219A;19.11.2020 Date. Coating Inspection Comments Surface Preparation As per Manufacturer's reccommentations Number of Coats Thickness Protection Between Coats. TWO NA Adequate Curing Between Coats. Yes NA Below Grounds. TWO NA Ground level. TWO NA Final Surface Check. a)Coverage Intact YES b)Final Surface Cleanliness YES c)Repair Method NA d)Re-inspection NA
Comments:
Completed By Accepted By Approved By Revision Comments: