767 Viscofluidscc 10 GB

id
EN 934-2
T.13
flu 10
co C /
is
V S C
Viscosity modifying admixture
for self-compacting concrete
DESCRIPTION COMPATIBILITY WITH OTHER PRODUCTS

Viscofluid SCC/10 is an admixture able to increase Viscofluid SCC/10 is compatible with other products
the viscosity of mixtures, substantially improving for preparing special self-compacting concrete,
stability, homogeneity, and resistance to segregation especially with:
and bleeding. • cloride-free hardening accelerator admixtures of the
Mapefast range to reach high mechanical strength
TECHNICAL CHARACTERISTICS after short curing times, even in cold weather;
Viscofluid SCC/10 is a very important component for • set-retarding admixtures of Mapetard range of
the production of Self-Compacting Concrete (SCC), with products for applications which require a great
high stability and absence of segregation and bleeding. retention of workability and controlled setting;
Viscofluid SCC/10 does not alter the high deformability • air-entraining agent products of the Mapeair and
obtained by adding admixtures from the Dynamon Mapeair AE range for self-compacting concrete,
range and at the same time ensures an increase resistant to freeze-thaw cycles;
in concrete cohesion and homogeneity which has
• Mapeplast SF powder silica fume-based admixture
practically no segregation. The increase of cohesion of
for self-compacting concrete with high mechanical
the mixtures is provided by the special characteristics of
strength, high impermeability and durability;
the organic polymer Viscofluid SCC/10 is made of. The
• Expancrete expanding agent for shrinkage
hydrophilic groups interact with water increasing the
compensated self-compacting concrete;
steric hindrance of the polymer. This reaction modifies
the rheology of the concrete and the fact that mixtures • fly ash and limestone filler;
are more stable and homogeneous in self-compacting • form-release agents from the Mapeform, Mapeform
concrete. Eco and DMA ranges for stripping concrete
formwork;
Viscofluid SCC/10 allows for: • curing agents of the Mapecure range to protect
• increased cohesion and homogeneity of concrete from rapid water evaporation.
self-compacting concrete eliminating segregation
and bleeding, but without altering the mixtures CONSUMPTION
deformability during the fresh state; Dosage by volume:
• making the rheological properties of self compacting 0,4 to 2% by cement weight (the total fines content
concrete less sensitive to the chemical – physical provided by cement, supplementary cementitious
variations in raw materials (e.g. variation of aggregate material and fraction of fine aggregates passing to
size) or small batching discrepancies of the concrete. sieve 0,125).
u id 0
ofl C/1
TECHNICAL DATA (typical values)
sc
Vi SC PRODUCT IDENTITY
(GB) A.G. BETA

Consistency: liquid
Colour: amber
Density at +20°C (g/cm³): 1.02 ± 0.02
Specific action: – improved cohesion

– reduction of segregation and bleeding
Chlorides: < 0.1
Classification according to EN 934-2: viscosity-modifying admixture, table 13
pH: 7.0 ± 1.0
Dry solids content (%): 5.5 ± 0.5
Alkali content: < 1.0
Different dosages from those suggested must product must ensure beforehand that it is
Any reproduction of texts, photos and illustrations published

be previously tested through concrete trials, suitable for the envisaged application. In
in addition to consulting MAPEI Technical every case, the user alone is fully responsible
here is prohibited and subject to prosecution

Services Department. for any consequences deriving from the use
of the product.
PACKAGING
200 l drums and 1,000 l tanks. Please refer to the current version of the
Also available in bulk on request. Technical Data Sheet, available from our
website www.mapei.com
STORAGE
Viscofluid SCC/10 can be stored for LEGAL NOTICE
12 months in original sealed packaging, The contents of this Technical Data
protected from frost and sunlight. Sheet (“TDS”) may be copied into another
project-related document, but the
SAFETY INSTRUCTIONS FOR resulting document shall not supplement
PREPARATION AND APPLICATION or replace requirements per the TDS in
Instructions for the safe use of our products force at the time of the MAPEI product
can be found on the latest version of the installation.
Safety Data Sheet, available from our website The most up-to-date TDS can
www.mapei.com. be downloaded from our website
www.mapei.com.
PRODUCT FOR PROFESSIONAL USE. ANY ALTERATION TO THE WORDING
OR REQUIREMENTS CONTAINED OR
WARNING DERIVED FROM THIS TDS EXCLUDES
Although the technical details and THE RESPONSIBILITY OF MAPEI.
recommendations contained in this product
data sheet correspond to the best of our
knowledge and experience, all the above All relevant references
767-3-2020 (GB)
information must, in every case, be taken as for the product are available
merely indicative and subject to confirmation upon request and from
after long-term practical application; for www.mapei.com
this reason, anyone who intends to use the
BUILDING THE FUTURE

767 Viscofluidscc 10 GB

Uploaded by

Copyright:

Available Formats

767 Viscofluidscc 10 GB

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

767 Viscofluidscc 10 GB

Uploaded by

Copyright:

Available Formats

id

DESCRIPTION COMPATIBILITY WITH OTHER PRODUCTS

(GB) A.G. BETA

Density at +20°C (g/cm³): 1.02 ± 0.02

Specific action: – improved cohesion

Chlorides: < 0.1

Classification according to EN 934-2: viscosity-modifying admixture, table 13

pH: 7.0 ± 1.0

Dry solids content (%): 5.5 ± 0.5

Alkali content: < 1.0

Any reproduction of texts, photos and illustrations published

here is prohibited and subject to prosecution

BUILDING THE FUTURE

You might also like