COMLIN ISOLATION PRODUCTS

Comlin is a family of elastomeric materials developed over a number of years

to meet the arduous and very specific requirements of the process pipework
engineer.

The primary functions of the product groups shown The materials we offer have been selected to
in this section are: provide optimum performance characteristics over
a wide range of applications; our HTFR grade is a 9
The reduction or elimination of noise and
flame-retardant material suitable for continuous
fatigue due to vibration of pipework against
operation at 350°C. Our low-friction grades, whilst
the supporting structure.
providing very low resistance to sliding pipework,
The prevention of galvanic corrosion due to the still retain the inherent flexibility of the backing
contact of dissimilar metals in the presence of material with no limitation as to how small the
an electrolyte. pipe can be. 10
The prevention of wear and/or crushing of We offer two standard product forms: one for
composite, thin-wall or non-ferrous pipework. applications using pipe clamps where the Comlin is
inserted between the clamp and pipe, this is known
as ‘clamp strip’. The second is for U-bolt
applications where the U-bolt is sheathed with
Comlin and provided with a seating strip for 11
protection to the underside of the pipe.

121
 COMLIN MATERIAL CHOICE
COMLIN SG60 COMPARISON OF COMLIN
Our standard grade of material, a general purpose MATERIALS WITH NEOPRENE
grade suitable for most applications within the Our general purpose grade, Comlin SG60,
temperature range of –40 to 100°C. Based on compares better than neoprene in all respects
modified rubbers reinforced via accretion with other than temperature range: both are restricted
specially selected PVC resins, in many instances its to an upper temperature limit of 100°C. However,
physical properties exceed those of established with respect to ozone, UV resistance, weathering,
thermoplastic elastomers. It has exceptionally good mechanical strength and long-term compression
tensile and tear strength combined with good set, Comlin SG60 is superior.
resistance to ozone, UV and oil.
Comlin RG45 and Comlin FR80 grades compare
favourably with neoprene with respect to
COMLIN RG45
resistance to ozone/UV attack and weathering, but
A specially formulated low modulus polymer alloy are far superior when considering compression set,
suitable for applications that require a very soft, operational temperature range and mechanical
flexible support whilst retaining all the advantages strength.
of this type of material.
Comlin HTFR65 performs considerably better in all
It has excellent low-temperature performance and respects than neoprene: resistance to ozone, UV,
is capable of operating within the temperature weathering, temperature and fire are all superior.
range –60 to 125°C, with the added advantage of
being stable in an irradiated environment. It has U-BOLT MATERIAL
very good compression set characteristics and Standard material for U-Bolts is carbon steel,
withstands ozone/UV attack and weathering. electroplated with zinc. For material specifications,
see page 88. U-Bolts can also be supplied with
This material can be supplied in our own unique
Xylan coating or manufactured from stainless steel.
low-friction form incorporating integral ribs of
polypropylene embedded into the contact face of
the product. This is achieved without loss of
properties or reduction of temperature range. This
grade is designated Comlin RG45LF.

COMLIN FR80
Our special fire-retardant grade of material has a
UL94 flame rating of V-0 and an oxygen index of
only 25%; it has good resistance to ozone/UV
attack and has very good flex fatigue. It also has
good fluid resistance and good performance in
polar chemicals.
Suitable for most applications within the
temperature range of –50 to 150°C, the material
has excellent compression set properties,
weathering resistance and mechanical strength.
Again, this material can be supplied in our low-
friction form, and is designated Comlin FR80LF.

COMLIN HTFR65
This high temperature material is suitable for
applications within the temperature range of –60 to
350°C. Based on silicone technology, it has excellent
resistance to fire, very low toxicity and can operate
continuously at 350°C with minimum loss of
properties. This material has excellent resistance to
ozone, UV and weathering, very good compression
set and is generally resistant to oils.
Due to the high temperature range capability of
this material, it is not possible to provide it with
our low-friction facing.

122
 COMLIN MATERIAL PROPERTIES

Test Material Grade

Property Method Unit SG60 RG45 FR80 HTFR65 RG45LF FR80LF

Hardness, 5 Sec D2240 Shore A 60 45 80 65 50 85

Specific Gravity D297 1.17 0.97 1.24 1.31 1.05 1.31

Ultimate Tensile
Strength D412 MPa 11.0 1.2 7.2 7.5 1.2 7.2

Ultimate Elongation D412 % 350 300 410 350 300 410

100% Modulus D412 MPa 5.8 1.2 3.2 4.0 1.2 3.2

Compression Set
@ 168 Hrs. 25 °C D395B % 37.0 13.0 27.1 10.0 13.0 27.1

Compression Set
@ 168 Hrs. 100 °C D395B % 45.0 22.0 46.3 15.0 22.0 46.3

Tension Set D412 % 11.0 5.0 10.0 12.0 5.0 10.0

Brittle Point D746 °C -45.0 -76.0 -56.0 -70.0 -76.0 -56.0

Maximum Continuous
Temperature °C 100 125 150 350 125 150

Oxygen Index D2863 – – 25.0 35.0 – 25.0

Horizontal Burn UL94 HB – – V-0 V-0 – V-0 6

Ozone/UV Resistance V.Good V.Good V.Good V.Good V.Good V.Good

Dielectric Constant 2.2 2.3 2.44 2.8 2.3 2.44

Colour Code
7
Type 801 –* –* Black Grey – –

Type 802 –* –* Red Grey – –

Type 901 – – – – –* Black

8
Type 902 – – – – –* Red

Type 816 Red Beige Green Grey – –

Type 817 Red Beige Green Grey – –

9
Type 818 – – Green – – –

Type 916 – – – – Beige Green

Type 917 – – – – Beige Green

10
Type 918 – – – – – Green

*Available upon special request — non-stocked products.

11

123
 801 COMLIN GRIP-TYPE U-BOLT
FOR STAINLESS STEEL & GALVANISED PIPES -60°C TO +350°C

A/2
D

G
E
A

C B

DIMENSIONS (mm) DIMENSIONS (mm)

PART PART
NUMBER THD NUMBER THD
A B C D E F G A B C D E F G
Length Length
801-021 21 6 37 60 20 8 30 60 801-168 168 16 210 180 35 15 49 128
801-027 27 6 43 65 20 8 32 64 801-219 219 16 261 200 35 15 44 123
801-034 34 6 50 65 20 8 28 60 801-245 245 16 287 210 35 15 41 120
801-043 43 10 69 70 25 10 19 69 801-273 273 16 315 225 35 15 42 121
801-049 49 10 75 80 25 10 26 76 801-324 324 16 366 250 35 15 41 120
801-061 61 10 87 90 25 10 30 80 801-356 356 16 398 265 35 15 40 119
801-072 72 12 98 95 25 10 25 83 801-407 407 16 449 300 35 15 50 129
801-089 89 12 115 100 25 10 22 80
801-115 115 12 141 110 25 10 19 77
801-140 140 12 166 135 25 10 31 89

ORDER BY: PART NUMBER AND COMLIN GRADE FINISH: ZINC PLATED.
MATERIAL: U-BOLT: CARBON STEEL NOTE: U-BOLTS CAN BE XYLAN COATED.
PLEASE REQUEST WHEN ORDERING.

802 COMLIN GRIP-TYPE U-BOLT

FOR COPPER & CUPRO-NICKEL PIPES -60°C TO +350°C
DIMENSIONS (mm) DIMENSIONS (mm)
PART PART
NUMBER THD NUMBER THD
A B C D E F G A B C D E F G
Length Length
802-016 16 6 32 60 20 8 32 60 802-076 76 12 102 100 25 10 28 86
802-025 25 6 41 65 20 8 33 65 802-089 89 12 115 110 25 10 32 90
802-030 30 6 46 65 20 8 30 62 802-108 108 12 134 120 25 10 32 90
802-038 38 10 64 70 25 10 21 70 802-159 159 16 201 165 35 15 39 118
802-045 45 10 71 80 25 10 28 78 802-219 219 16 261 200 35 15 44 123
802-057 57 10 83 90 25 10 32 82

ORDER BY: PART NUMBER AND COMLIN GRADE FINISH: ZINC PLATED.
MATERIAL: U-BOLT: CARBON STEEL NOTE: U-BOLTS CAN BY XYLAN COATED.
PLEASE REQUEST WHEN ORDERING.

124
 901 COMLIN NON-GRIP TYPE LINED U-BOLT
FOR STAINLESS STEEL & GALVANISED PIPES -60°C TO +150°C

A/2
D

G
E
A

C B

DIMENSIONS (mm) DIMENSIONS (mm)

PART PART
NUMBER THD NUMBER THD
A B C D E F G Length A B C D E F G Length
6
901-021 21 6 37 60 20 8 30 60 901-168 168 16 210 180 35 15 49 128
901-027 27 6 43 65 20 8 32 64 901-219 219 16 261 200 35 15 44 123
901-034 34 6 50 65 20 8 28 60 901-245 245 16 287 210 35 15 41 120
901-043 43 10 69 70 25 10 19 69 901-273 273 16 315 225 35 15 42 121
901-049 49 10 75 80 25 10 26 76 901-324 324 16 366 250 35 15 41 120
7
901-061 61 10 87 90 25 10 30 80 901-356 356 16 398 265 35 15 40 119
901-072 72 12 98 95 25 10 25 83 901-407 407 16 449 300 35 15 50 129
901-089 89 12 115 100 25 10 22 80
901-115 115 12 141 110 25 10 19 77
901-140 140 12 166 135 25 10 31 89

8
ORDER BY: PART NUMBER AND COMLIN GRADE FINISH: ZINC PLATED.
MATERIAL: U-BOLT: CARBON STEEL NOTE: U-BOLTS CAN BE XYLAN COATED.
PLEASE REQUEST WHEN ORDERING.

902 COMLIN NON-GRIP TYPE LINED U-BOLT

FOR COPPER & CUPRO-NICKEL PIPES -60°C TO +150°C
9
DIMENSIONS (mm) DIMENSIONS (mm)
PART PART
NUMBER THD NUMBER THD
A B C D E F G A B C D E F G
Length Length
902-016 16 6 32 60 20 8 32 60 902-076 76 12 102 100 25 10 28 86
902-025 25 6 41 65 20 8 33 65 902-089 89 12 115 110 25 10 32 90
902-030 30 6 46 65 20 8 30 62
10
902-108 108 12 134 120 25 10 32 90
902-038 38 10 64 70 25 10 21 70 902-159 159 16 201 165 35 15 39 118
902-045 45 10 71 80 25 10 28 78 902-219 219 16 261 200 35 15 44 123
902-057 57 10 83 90 25 10 32 82

ORDER BY: PART NUMBER AND COMLIN GRADE FINISH: ZINC PLATED.
MATERIAL: U-BOLT: CARBON STEEL NOTE: U-BOLTS CAN BE XYLAN COATED. 11
PLEASE REQUEST WHEN ORDERING.

125
 816 AND 817 COMLIN CLAMP STRIP -60°C to +350°C

A
B

D
C

ORDER BY: PART NUMBER, LENGTH AND COMLIN GRADE.

AVAILABLE EITHER CUT TO REQUIRED LENGTH OR ANY LENGTH UP TO 25 METRES.

PART DIMENSIONS (mm)

NUMBER A B C D

816-30 25 5 40 3
816-40 35 5 50 3
816-45 40 5 55 3
816-50 45 5 60 3
816-60 55 5 70 3 Recommended Length of Clamp Strip vs Pipe Size
816-65 60 5 80 3
DIMENSIONS (mm)
816-70 65 5 85 3
Pipe 816 817 817 817 817 817 817 817 817 817 817
816-75 70 5 90 3
O/D ALL 20 30 40 50 60 70 90 110 130 150
816-80 75 5 95 3
26.9 88 88 90 91 91 91 91 94 94 94 98
816-90 85 6 105 3
33.7 109 109 111 112 112 112 112 116 116 116 119
816-100 95 6 115 3
42.4 136 136 138 139 139 139 139 143 143 143 146
816-110 105 6 125 3
48.3 155 155 157 158 158 158 158 162 162 162 165
816-130 125 6 145 3
60.3 193 193 195 196 196 196 196 199 199 199 203
816-140 135 6 155 3
76.1 242 242 244 245 245 245 245 249 249 249 252
816-150 150 6 165 3
88.9 282 282 285 286 286 286 286 289 289 289 292
114.3 362 362 364 365 365 365 365 369 369 369 372
139.7 442 442 444 445 445 445 445 449 449 449 452
168.3 532 532 534 535 535 535 535 539 539 539 542
PART DIMENSIONS (mm) 219.1 691 691 694 695 695 695 695 698 698 698 701
NUMBER A B C D 244.5 771 771 773 774 774 774 774 778 778 778 781
817-30 25 7.5 45 5 273.0 861 861 863 864 864 864 864 868 868 868 871
817-40 35 8.5 57 6 323.9 1021 1021 1023 1024 1024 1024 1024 1028 1028 1028 1031
817-50 45 8.5 67 6 355.6 1120 1120 1122 1123 1123 1123 1123 1127 1127 1127 1130
817-60 55 8.5 77 6 406.4 1280 1280 1282 1283 1283 1283 1283 1287 1287 1287 1290
817-70 65 8.5 85 6 457.0 1439 1439 1441 1442 1442 1442 1442 1446 1446 1446 1449
817-90 85 14.5 105 9.5 508.0 1599 1599 1601 1602 1602 1602 1602 1606 1606 1606 1609
817-110 105 14.5 125 9.5 610.0 1920 1920 1922 1923 1923 1923 1923 1926 1926 1926 1929
817-130 125 14.5 145 9.5 762.0 2397 2397 2399 2400 2400 2400 2400 2404 2404 2404 2407
817-150 150 17.5 165 12.5 914.0 2875 2875 2877 2878 2878 2878 2878 2881 2881 2881 2885

126
916 AND 917 COMLIN LINED CLAMP STRIP -60°C TO +150°C

A
B

D
C

ORDER BY: PART NUMBER, LENGTH AND COMLIN GRADE.

AVAILABLE EITHER CUT TO REQUIRED LENGTH OR ANY LENGTH UP TO 25 METRES.

PART DIMENSIONS (mm)

NUMBER A B C D
6
916-30 25 5 40 3
916-40 35 5 50 3
916-45 40 5 55 3
916-50 45 5 60 3
916-60 55 5 70 3 Recommended Length of Clamp Strip vs Pipe Size
916-65 60 5 80 3
DIMENSIONS (mm) 7
916-70 65 5 85 3
Pipe 916 917 917 917 917 917 917 917 917 917 917
916-75 70 5 90 3
O/D ALL 20 30 40 50 60 70 90 110 130 150
916-80 75 5 95 3
26.9 88 88 90 91 91 91 91 94 94 94 98
916-90 85 6 105 3
33.7 109 109 111 112 112 112 112 116 116 116 119
916-100 95 6 115 3
42.4 136 136 138 139 139 139 139 143 143 143 146
916-110 105 6 125 3
48.3 155 155 157 158 158 158 158 162 162 162 165 8
916-130 125 6 145 3
60.3 193 193 195 196 196 196 196 199 199 199 203
916-140 135 6 155 3
76.1 242 242 244 245 245 245 245 249 249 249 252
916-150 150 6 165 3
88.9 282 282 285 286 286 286 286 289 289 289 292
114.3 362 362 364 365 365 365 365 369 369 369 372
139.7 442 442 444 445 445 445 445 449 449 449 452
168.3 532 532 534 535 535 535 535 539 539 539 542 9
PART DIMENSIONS (mm) 219.1 691 691 694 695 695 695 695 698 698 698 701
NUMBER A B C D 244.5 771 771 773 774 774 774 774 778 778 778 781
917-30 25 7.5 45 5 273.0 861 861 863 864 864 864 864 868 868 868 871
917-40 35 8.5 57 6 323.9 1021 1021 1023 1024 1024 1024 1024 1028 1028 1028 1031
917-50 45 8.5 67 6 355.6 1120 1120 1122 1123 1123 1123 1123 1127 1127 1127 1130
917-60 55 8.5 77 6 406.4 1280 1280 1282 1283 1283 1283 1283 1287 1287 1287 1290 10
917-70 65 8.5 85 6 457.0 1439 1439 1441 1442 1442 1442 1442 1446 1446 1446 1449
917-90 85 14.5 105 9.5 508.0 1599 1599 1601 1602 1602 1602 1602 1606 1606 1606 1609
917-110 105 14.5 125 9.5 610.0 1920 1920 1922 1923 1923 1923 1923 1926 1926 1926 1929
917-130 125 14.5 145 9.5 762.0 2397 2397 2399 2400 2400 2400 2400 2404 2404 2404 2407
917-150 150 17.5 165 12.5 914.0 2875 2875 2877 2878 2878 2878 2878 2881 2881 2881 2885
11

127
 818 COMLIN GRIP CLAMP STRIP -60°C TO +150°C

A
B

3
C

ORDER BY: PART NUMBER, LENGTH AND COMLIN GRADE.

AVAILABLE EITHER CUT TO REQUIRED LENGTH OR ANY LENGTH UP TO 25 METRES.

PART
A✕B C
CODE

818- 50 ✕ 6 50 ✕ 6 55
818- 65 ✕ 10 65 ✕ 10 70
818- 80 ✕ 10 80 ✕ 10 85

818-100 ✕ 10 100 ✕ 10 105

818-100 ✕ 20 100 ✕ 20 105

918 COMLIN LINED CLAMP STRIP -60°C TO +150°C

A
B

ORDER BY: PART NUMBER, LENGTH AND COMLIN GRADE.

AVAILABLE EITHER CUT TO REQUIRED LENGTH OR ANY LENGTH UP TO 25 METRES.

PART
A✕B C
CODE

918- 50 ✕ 6 50 ✕ 6 55
918- 65 ✕ 10 65 ✕ 10 70
918- 80 ✕ 10 80 ✕ 10 85

918-100 ✕ 10 100 ✕ 10 105

918-100 ✕ 20 100 ✕ 20 105

128
TWO BOLT PIPE CLAMP WITH COMLIN MAX. TEMPERATURE 350ºC

B E
D
ØA

Order by Part Number, Comlin Type and Comlin Grade e.g. PC2-CM2-100-2/817/FR80
Material: Carbon Steel and Comlin. Also available in Stainless Steel.
Pipe Clamps with other Load Capacities are also available.
* Do not exceed the Maximum Temperature for the Grade of Comlin used.
*LOAD
PART NUMBER FOR PART NUMBER FOR PIPE O/D A B C D E WEIGHT CAPACITY
COMLIN TYPE COMLIN TYPE AT 350°C
816, 916, 818 & 918 817 &917 mm in mm mm mm in mm mm kgf kgf
PC2-CM1-15-0 PC2-CM2-15-0 21.3 0.839 12 15 35 13/8 18 35 0.4 390
PC2-CM1-20-0 PC2-CM2-20-0 26.7 1.051 12 15 40 19/16 18 35 0.4 390 6
PC2-CM1-25-0 PC2-CM2-25-0 33.4 1.315 12 15 45 13/4 18 35 0.5 390
PC2-CM1-32-0 PC2-CM2-32-0 42.2 1.661 12 15 50 115/16 18 35 0.5 390
PC2-CM1-40-0 PC2-CM2-40-0 48.3 1.902 12 15 55 23/16 18 35 0.5 390
PC2-CM1-50-0 PC2-CM2-50-0 60.3 2.375 12 15 60 23/8 18 35 0.6 390
PC2-CM1-65-2 PC2-CM2-65-2 73 2.875 16 17 70 23/4 24 40 1.0 590
PC2-CM1-80-2 PC2-CM2-80-2 88.9 3.500 16 17 80 31/8 24 40 1.1 530
PC2-CM1-100-0 PC2-CM2-100-0 114.3 4.500 12 15 90 39/16 18 35 0.8 270
PC2-CM1-100-2 PC2-CM2-102-2 114.3 4.500 16 17 100 315/16 24 40 1.7 740 7
PC2-CM1-150-0 PC2-CM2-150-0 168.3 6.625 12 15 120 43/4 18 40 1.4 340
PC2-CM1-150-2 PC2-CM2-150-2 168.3 6.625 16 17 125 415/16 24 40 2.1 590
PC2-CM1-200-1 PC2-CM2-200-1 219.1 8.625 16 17 155 61/8 24 40 2.5 460
PC2-CM1-200-2 PC2-CM2-200-2 219.1 8.625 16 17 160 65/16 24 45 3.5 790
PC2-CM1-250-1 PC2-CM2-250-1 273 10.750 16 17 180 71/16 24 40 2.9 410
PC2-CM1-250-3 PC2-CM2-250-3 273 10.750 20 20 195 711/16 30 60 6.9 1240
PC2-CM1-300-2 PC2-CM2-300-2 323.9 12.750 16 17 210 81/4 24 45 4.6 650
97/16
PC2-CM1-300-4
PC2-CM1-350-3
PC2-CM2-300-4
PC2-CM2-350-3
323.9
355.6
12.750
14.000
24
20
25
20
240
235 91/4
36
30
65
60
14.8
8.3
1830
1080
8
PC2-CM1-350-5 PC2-CM2-350-5 355.6 14.000 30 29 265 107/16 45 90 23.2 3050
PC2-CM1-400-4 PC2-CM2-400-4 406.4 16.000 24 25 280 11 36 35 17.3 1830
PC2-CM1-400-6 PC2-CM2-400-6 406.4 16.000 36 41 295 115/8 54 110 32.3 3810
PC2-CM1-450-4 PC2-CM2-450-4 457.2 18.000 24 25 310 123/16 36 65 19.1 1830
PC2-CM1-450-6 PC2-CM2-450-6 457.2 18.000 36 41 320 125/8 54 110 35.0 3810
PC2-CM1-500-4 PC2-CM2-500-4 508 20.000 24 25 335 133/16 36 65 20.7 1830
PC2-CM1-500-7 PC2-CM2-500-7 508 20.000 42 45 365 143/8 63 110 50.0 5470
PC2-CM1-550-5 PC2-CM2-550-5 558.8 22.000 30 29 370 149/16 45 90 32.3 2920
9
PC2-CM1-550-7 PC2-CM2-550-7 558.8 22.000 42 45 395 159/16 63 130 63.0 5470
PC2-CM1-600-5 PC2-CM2-600-5 609.6 24.000 30 29 395 159/16 45 90 34.5 2660
PC2-CM1-600-7 PC2-CM2-600-7 609.6 24.000 42 45 420 169/16 63 130 66.9 5470
PC2-CM1-650-5 PC2-CM2-650-5 660.4 26.000 30 29 420 169/16 45 90 36.7 2530
PC2-CM1-650-7 PC2-CM2-650-7 660.4 26.000 42 45 445 171/2 63 150 81.4 5470
PC2-CM1-700-5 PC2-CM2-700-5 711.2 28.000 30 29 445 171/2 45 90 38.9 2420
PC2-CM1-700-7 PC2-CM2-700-7 711.2 28.000 42 45 470 181/2 63 150 85.9 5470
PC2-CM1-750-5 PC2-CM2-750-5 762 30.000 30 29 475 1811/16 45 90 41.1 2350
10
PC2-CM1-750-8 PC2-CM2-750-8 762 30.000 48 52 515 201/4 72 150 112.8 7610
PC2-CM1-800-5 PC2-CM2-800-5 812.8 32.000 30 29 500 1911/16 45 110 53.1 2780
PC2-CM1-800-8 PC2-CM2-800-8 812.8 32.000 48 52 560 221/16 72 150 158.9 10910
PC2-CM1-850-5 PC2-CM2-850-5 863.6 34.000 30 29 525 2011/16 45 110 55.8 2690
PC2-CM1-850-8 PC2-CM2-850-8 863.6 34.000 48 52 590 231/4 72 150 167.2 10910
PC2-CM1-900-6 PC2-CM2-900-6 914.4 36.000 36 41 570 227/16 54 110 75.6 3760
PC2-CM1-900-8 PC2-CM2-900-8 914.4 36.000 48 52 615 243/16 72 150 174.6 10910
PC2-CM1-950-6 PC2-CM2-950-6 965 38.000 36 41 595 237/16 54 110 79.0 3660 11
PC2-CM1-950-8 PC2-CM2-950-8 965 38.000 48 52 640 253/16 72 150 182.0 10910
PC2-CM1-1000-6 PC2-CM2-1000-6 1016 40.000 36 41 620 247/16 54 130 97.2 3810
PC2-CM1-1000-8 PC2-CM2-1000-8 1016 40.000 48 52 665 263/16 72 150 189.3 10910

129
 THREE BOLT PIPE CLAMP WITH COMLIN MAX. TEMPERATURE 350ºC

B E
D
ØA

Order by Part Number, Comlin Type and Comlin Grade e.g. PC3-CM2-100-2/817/FR80
Material: Carbon Steel and Comlin. Also available in Stainless Steel.
Pipe Clamps with other Load Capacities are also available.
* Do not exceed the Maximum Temperature for the Grade of Comlin used.
*LOAD
PART NUMBER FOR PART NUMBER FOR PIPE O/D A B C D E WEIGHT CAPACITY
COMLIN TYPE COMLIN TYPE AT 350°C
816, 916, 818 & 918 817 &917 mm in mm mm mm in mm mm kgf kgf
PC3-CM1-15-0 PC3-CM2-15-0 21.3 0.839 12 15 100 315/16 18 35 0.6 390
PC3-CM1-20-0 PC3-CM2-20-0 26.7 1.051 12 15 100 315/16 18 35 0.6 390
PC3-CM1-25-0 PC3-CM2-25-0 33.4 1.315 12 15 100 315/16 18 35 0.6 390
PC3-CM1-32-0 PC3-CM2-32-0 42.2 1.661 12 15 110 45/16 18 35 0.7 390
PC3-CM1-40-0 PC3-CM2-40-0 48.3 1.902 12 15 110 45/16 18 35 0.7 390
PC3-CM1-50-0 PC3-CM2-50-0 60.3 2.375 12 15 120 43/4 18 35 0.7 390
PC3-CM1-65-2 PC3-CM2-65-2 73 2.875 16 17 130 51/8 24 40 1.1 650
PC3-CM1-80-2 PC3-CM2-80-2 88.9 3.500 16 17 150 57/8 24 40 1.2 600
PC3-CM1-100-0 PC3-CM2-100-0 114.3 4.500 12 15 180 71/16 18 35 1.1 270
PC3-CM1-100-2 PC3-CM2-102-2 114.3 4.500 16 17 180 71/16 24 40 2.0 800
PC3-CM1-150-0 PC3-CM2-150-0 168.3 6.625 12 15 210 81/4 18 40 1.8 340
PC3-CM1-150-2 PC3-CM2-150-2 168.3 6.625 16 17 210 81/4 24 40 2.4 590
PC3-CM1-200-1 PC3-CM2-200-1 219.1 8.625 16 17 280 11 24 40 3.0 510
PC3-CM1-200-3 PC3-CM2-200-3 219.1 8.625 20 20 280 11 30 60 7.0 1320
PC3-CM1-250-2 PC3-CM2-250-2 273 10.750 16 17 320 125/8 24 45 4.9 620
PC3-CM1-250-4 PC3-CM2-250-4 273 10.750 24 25 320 125/8 36 65 15.0 1590
PC3-CM1-300-3 PC3-CM2-300-3 323.9 12.750 20 20 350 133/4 30 60 9.0 1180
PC3-CM1-300-4 PC3-CM2-300-4 323.9 12.750 24 25 350 133/4 36 65 16.7 1830
PC3-CM1-350-3 PC3-CM2-350-3 355.6 14.000 20 20 380 1415/16 30 60 9.8 1100
PC3-CM1-350-5 PC3-CM2-350-5 355.6 14.000 30 29 380 1415/16 45 90 25.8 3050
PC3-CM1-400-4 PC3-CM2-400-4 406.4 16.000 24 25 420 169/16 36 65 20.0 1830
PC3-CM1-400-6 PC3-CM2-400-6 406.4 16.000 36 41 420 169/16 54 110 35.9 3810
PC3-CM1-450-4 PC3-CM2-450-4 457.2 18.000 24 25 450 1711/16 36 65 21.7 1830
PC3-CM1-450-6 PC3-CM2-450-6 457.2 18.000 36 41 450 1711/16 54 110 38.7 3810
PC3-CM1-500-4 PC3-CM2-500-4 508 20.000 24 25 470 181/12 36 65 23.2 1750
PC3-CM1-500-7 PC3-CM2-500-7 508 20.000 42 45 470 181/12 63 110 53.3 5470
PC3-CM1-550-5 PC3-CM2-550-5 558.8 22.000 30 29 500 1911/16 45 90 35.3 2510
PC3-CM1-550-7 PC3-CM2-550-7 558.8 22.000 42 45 500 1911/16 63 130 66.9 5470
PC3-CM1-600-5 PC3-CM2-600-5 609.6 24.000 30 29 520 201/12 45 90 37.4 2360
PC3-CM1-600-7 PC3-CM2-600-7 609.6 24.000 42 45 520 201/12 63 130 70.6 5470
PC3-CM1-650-5 PC3-CM2-650-5 660.4 26.000 30 29 560 221/16 45 90 40.8 2340
PC3-CM1-650-7 PC3-CM2-650-7 660.4 26.000 42 45 560 221/16 63 130 87.0 5470
PC3-CM1-700-5 PC3-CM2-700-5 711.2 28.000 30 29 590 231/4 45 90 43.2 2420
PC3-CM1-700-7 PC3-CM2-700-7 711.2 28.000 42 45 590 231/4 63 150 91.9 5470
PC3-CM1-750-5 PC3-CM2-750-5 762 30.000 30 29 640 253/16 45 110 56.3 2870
PC3-CM1-750-8 PC3-CM2-750-8 762 30.000 48 52 640 253/16 72 150 120.4 8160
PC3-CM1-800-5 PC3-CM2-800-5 812.8 32.000 30 29 660 26 45 110 58.8 2790
PC3-CM1-800-8 PC3-CM2-800-8 812.8 32.000 48 52 660 26 72 150 125.6 7610
PC3-CM1-850-5 PC3-CM2-850-5 863.6 34.000 30 29 710 2715/16 45 110 62.4 2690
PC3-CM1-850-8 PC3-CM2-850-8 863.6 34.000 48 52 710 2715/16 72 150 176.4 8920
PC3-CM1-900-6 PC3-CM2-900-6 914.4 36.000 36 41 740 291/18 54 130 97.9 3810
PC3-CM1-900-8 PC3-CM2-900-8 914.4 36.000 48 52 740 291/18 72 150 184.7 8560
PC3-CM1-950-6 PC3-CM2-950-6 965 38.000 36 41 770 305/16 54 130 102.2 3810
PC3-CM1-950-8 PC3-CM2-950-8 965 38.000 48 52 770 305/16 72 150 192.7 8410
PC3-CM1-1000-6 PC3-CM2-1000-6 1016 40.000 36 41 790 311/8 54 130 106.0 3810
PC3-CM1-1000-8 PC3-CM2-1000-8 1016 40.000 48 52 790 311/8 72 150 201.8 10000

130
PIPE CLAMP BASE WITH COMLIN MAX. TEMPERATURE 350ºC

E C C
D

PB2

D
C

D
C C

PB3

A
A B

C
PB1
A
TYPE PB1 IS FOR USE AS A SLIDING BASE OR WITH SPREADER BEAMS. IF IT IS GUIDED
AT THE BASE, THE LOAD CAPACITY IN THE HORIZONTAL DIRECTION IS 30% OF THE
A
STATED VERTICAL LOAD CAPACITY.
TYPE PB2 IS FOR USE AS A GUIDE ON HORIZONTAL OR VERTICAL PIPES, OR WHEN
USED WITH THE LEGS VERTICAL AS A VERTICAL RESTRAINT ON HORIZONTAL PIPES IN

C
CASES WHERE THE VERTICAL LOAD CAN ACT UPWARDS.
PB4

A
TYPE PB3 IS FOR USE AS A GUIDE ON HORIZONTAL PIPES. THE STATED LOAD CAPACITY
IS APPLICABLE TO BOTH VERTICAL AND LATERAL LOADINGS ACTING CONCURRENTLY.

C
TYPE PB4 IS A TWO WAY GUIDE WHICH CAN BE USED FOR EITHER HORIZONTAL OR
VERTICAL PIPES.
C C

Order by Part Number, Comlin Type and Comlin Grade e.g. PB1-CM1-150-4/816/FR80
Material: Carbon Steel and Comlin. Also available in Stainless Steel.
Pipe Clamp Bases with other Load Capacities are also available.
* Do not exceed the Maximum Temperature for the Grade of Comlin used.
Load
PART NUMBER FOR PART NUMBER FOR Max Capacity
COMLIN TYPE COMLIN TYPE Pipe O/D A B C D E Lagging (See
816, 916, 818 & 918 817 & 917 . Thickness Weight notes)
For Multi-Leg types, replace PB1 with PB1 PB2 PB3 PB4
PB2, PB3 or PB4 mm in mm mm mm in mm mm mm kgf kgf kgf kgf kgf
PB1-CM1-15-1 PB1-CM2-15-1 21.3 0.839 50 150 90 39/16 106 185 75 1.8 3.0 4.2 5.4 360
PB1-CM1-20-1 PB1-CM2-20-1 26.7 1.051 50 150 90 39/16 110 185 75 1.8 3.0 4.2 5.4 360
PB1-CM1-25-1 PB1-CM2-25-1 33.4 1.315 50 150 90 39/16 120 185 70 1.9 3.1 4.3 5.4 360
6
PB1-CM1-32-1 PB1-CM2-32-1 42.2 1.661 60 150 100 315/16 130 185 75 2.3 3.7 5.2 6.7 360
PB1-CM1-40-1 PB1-CM2-40-1 48.3 1.902 60 150 100 315/16 138 185 75 2.3 3.8 5.2 6.7 360
PB1-CM1-50-2 PB1-CM2-50-2 60.3 2.375 70 150 110 45/16 150 203 75 2.7 4.4 6.2 7.9 530
PB1-CM1-65-2 PB1-CM2-65-2 73 2.875 70 200 110 45/16 166 253 70 3.1 5.2 7.2 9.3 530
PB1-CM1-80-2 PB1-CM2-80-2 88.9 3.500 100 200 160 65/16 182 253 115 4.6 7.9 11 15 530
PB1-CM1-90-2 PB1-CM2-90-2 101.6 4.000 100 200 160 65/16 196 253 105 4.7 8.0 11 15 530
PB1-CM1-100-3 PB1-CM2-100-3 114.3 4.500 100 200 170 611/16 208 253 110 4.8 8.2 12 15 1010 7
PB1-CM1-125-3 PB1-CM2-125-3 141.3 5.563 110 200 180 71/16 236 253 105 5.4 9.2 13 17 1010
PB1-CM1-150-4 PB1-CM2-150-4 168.3 6.625 120 200 200 77/8 278 264 115 9.3 15 21 27 1580
PB1-CM1-175-5 PB1-CM2-175-5 193.7 7.625 140 250 240 97/16 302 314 140 12 20 29 37 2280
PB1-CM1-200-3 PB1-CM2-200-3 219.1 8.625 150 250 250 913/16 320 308 140 9.8 16 23 29 1010
PB1-CM1-200-6 PB1-CM2-200-6 219.1 8.625 150 250 250 913/16 364 346 140 24 38 52 65 3650
PB1-CM1-225-3 PB1-CM2-225-3 244.5 9.625 160 250 260 101/4 346 308 135 11 18 25 32 1010
PB1-CM1-225-6 PB1-CM2-225-6 244.5 9.625 160 250 270 105/8 392 346 145 26 41 57 72 3650
PB1-CM1-250-4 PB1-CM2-250-4 273 10.750 170 250 280 11 384 314 140 16 26 36 47 1580
8
PB1-CM1-250-7 PB1-CM2-250-7 273 10.750 170 250 280 11 420 346 140 28 45 61 77 5340
PB1-CM1-300-4 PB1-CM2-300-4 323.9 12.750 190 300 320 125/8 446 369 155 22 35 49 62 1580
PB1-CM1-300-6 PB1-CM2-300-6 323.9 12.750 190 300 320 125/8 474 396 155 35 56 76 97 3650
PB1-CM1-300-8 PB1-CM2-300-8 323.9 12.750 190 300 320 125/8 526 410 155 54 80 106 133 7400
PB1-CM1-350-6 PB1-CM2-350-6 355.6 14.000 210 300 340 133/8 506 396 160 39 62 86 109 3650
PB1-CM1-350-7 PB1-CM2-350-7 355.6 14.000 210 300 340 133/8 506 396 160 39 62 86 109 5340
PB1-CM1-350-9 PB1-CM2-350-9 355.6 14.000 210 300 340 133/8 560 425 160 70 111 152 193 9650 9
PB1-CM1-400-6 PB1-CM2-400-6 406.4 16.000 240 300 360 143/16 570 391 155 47 74 101 128 3650
PB1-CM1-400-8 PB1-CM2-400-8 406.4 16.000 240 300 360 143/16 610 410 155 67 101 136 170 7400
PB1-CM1-400-10 PB1-CM2-400-10 406.4 16.000 240 300 370 149/16 638 465 165 109 171 233 295 13350
PB1-CM1-450-6 PB1-CM2-450-6 457.2 18.000 270 300 390 153/8 624 391 160 53 85 116 147 3650
PB1-CM1-450-9 PB1-CM2-450-9 457.2 18.000 270 300 390 153/8 664 425 160 91 145 200 255 9650

10

11

131
 PIPE CLAMP BASE WITH COMLIN MAX. TEMPERATURE 350ºC

E C C
D

PB2

D
C

D
C C

PB3

A
A B

C
PB1
A
TYPE PB1 IS FOR USE AS A SLIDING BASE OR WITH SPREADER BEAMS. IF IT IS GUIDED
AT THE BASE, THE LOAD CAPACITY IN THE HORIZONTAL DIRECTION IS 30% OF THE
A
STATED VERTICAL LOAD CAPACITY.
TYPE PB2 IS FOR USE AS A GUIDE ON HORIZONTAL OR VERTICAL PIPES, OR WHEN
USED WITH THE LEGS VERTICAL AS A VERTICAL RESTRAINT ON HORIZONTAL PIPES IN

C
CASES WHERE THE VERTICAL LOAD CAN ACT UPWARDS.
PB4

A
TYPE PB3 IS FOR USE AS A GUIDE ON HORIZONTAL PIPES. THE STATED LOAD CAPACITY
IS APPLICABLE TO BOTH VERTICAL AND LATERAL LOADINGS ACTING CONCURRENTLY.

C
TYPE PB4 IS A TWO WAY GUIDE WHICH CAN BE USED FOR EITHER HORIZONTAL OR
VERTICAL PIPES.
C C

Order by Part Number, Comlin Type and Comlin Grade e.g. PBI-CM1-150-4/816/FR80
Material: Carbon Steel and Comlin. Also available in Stainless Steel.
Pipe Clamp Bases with other Load Capacities are also available.
* Do not exceed the Maximum Temperature for the Grade of Comlin used.
Load
PART NUMBER FOR PART NUMBER FOR Max Capacity
COMLIN TYPE COMLIN TYPE Pipe O/D A B C D E Lagging (See
816, 916, 818 & 918 817 & 917 . Thickness Weight notes)
For Multi-Leg types, replace PB1 with PB1 PB2 PB3 PB4
PB2, PB3 or PB4 mm in mm mm mm in mm mm mm kgf kgf kgf kgf kgf
PB1-CM1-450-11 PB1-CM2-450-11 457.2 18.000 270 300 400 153/4 716 500 170 152 241 329 418 18000
PB1-CM1-500-6 PB1-CM2-500-6 508 20.000 300 400 440 175/16 694 491 185 67 110 152 195 3650
PB1-CM1-500-9 PB1-CM2-500-9 508 20.000 300 400 450 1711/16 716 525 195 114 189 263 338 9650
PB1-CM1-500-12 PB1-CM2-500-12 508 20.000 300 400 460 181/8 770 600 205 189 308 427 546 23025
PB1-CM1-550-6 PB1-CM2-550-6 558.8 22.000 330 400 460 181/8 746 491 180 74 121 168 216 3650
PB1-CM1-550-8 PB1-CM2-550-8 558.8 22.000 330 400 470 181/2 768 510 190 103 164 224 285 7400
PB1-CM1-550-10 PB1-CM2-550-10 558.8 22.000 330 400 480 187/8 794 565 200 168 275 383 490 13350
PB1-CM1-550-13 PB1-CM2-550-13 558.8 22.000 330 400 490 195/16 872 650 210 301 488 675 862 28125
PB1-CM1-600-6 PB1-CM2-600-6 609.6 24.000 360 400 490 195/16 820 501 185 98 151 203 256 3650
PB1-CM1-600-8 PB1-CM2-600-8 609.6 24.000 360 400 490 195/16 820 510 185 112 179 246 313 7400
PB1-CM1-600-10 PB1-CM2-600-10 609.6 24.000 360 400 500 1911/16 846 565 195 183 301 420 538 13350
PB1-CM1-600-13 PB1-CM2-600-13 609.6 24.000 360 400 520 201/2 924 650 215 330 538 745 953 28125
PB1-CM1-650-6 PB1-CM2-650-6 660.4 26.000 390 400 540 211/4 872 501 205 109 168 228 288 3650
PB1-CM1-650-8 PB1-CM2-650-8 660.4 26.000 390 400 540 211/4 892 510 205 125 201 277 353 7400
PB1-CM1-650-10 PB1-CM2-650-10 660.4 26.000 390 400 550 215/8 898 565 215 203 337 471 605 13350
PB1-CM1-650-13 PB1-CM2-650-13 660.4 26.000 390 400 570 227/16 982 670 235 386 619 853 1087 28125
PB1-CM1-700-6 PB1-CM2-700-6 711.2 28.000 420 500 560 221/16 924 601 200 125 198 271 343 3650
PB1-CM1-700-8 PB1-CM2-700-8 711.2 28.000 420 500 570 227/16 942 610 210 146 239 332 426 7400
PB1-CM1-700-10 PB1-CM2-700-10 711.2 28.000 420 500 580 2213/16 980 665 220 239 403 566 730 13350
PB1-CM1-700-13 PB1-CM2-700-13 711.2 28.000 420 500 590 231/4 1036 770 230 442 722 1002 1281 28125
PB1-CM1-750-6 PB1-CM2-750-6 762 30.000 450 500 590 231/4 976 601 205 135 214 294 373 3650
PB1-CM1-750-8 PB1-CM2-750-8 762 30.000 450 500 590 231/4 996 610 205 157 257 358 458 7400
PB1-CM1-750-10 PB1-CM2-750-10 762 30.000 450 500 600 235/8 1030 685 215 274 451 627 804 13350
PB1-CM1-750-13 PB1-CM2-750-13 762 30.000 450 500 620 247/16 1086 770 235 476 781 1086 1390 28125
PB1-CM1-800-6 PB1-CM2-800-6 812.8 32.000 480 500 610 24 1026 601 200 144 230 315 400 3650
PB1-CM1-800-8 PB1-CM2-800-8 812.8 32.000 480 500 620 247/16 1046 610 210 169 278 387 496 7400
PB1-CM1-800-10 PB1-CM2-800-10 812.8 32.000 480 500 630 2413/16 1084 685 220 295 486 678 869 13350
PB1-CM1-800-13 PB1-CM2-800-13 812.8 32.000 480 500 640 253/16 1140 770 230 508 835 1162 1490 28125
PB1-CM1-850-6 PB1-CM2-850-6 863.6 34.000 510 500 640 253/16 1078 601 205 155 247 339 431 3650
PB1-CM1-850-8 PB1-CM2-850-8 863.6 34.000 510 500 640 253/16 1098 610 205 180 297 414 530 7400

132
PIPE CLAMP BASE WITH COMLIN MAX. TEMPERATURE 350ºC

E C C
D

PB2

D
C

D
C C

PB3

A
A B

C
PB1
A
TYPE PB1 IS FOR USE AS A SLIDING BASE OR WITH SPREADER BEAMS. IF IT IS GUIDED
AT THE BASE, THE LOAD CAPACITY IN THE HORIZONTAL DIRECTION IS 30% OF THE
A
STATED VERTICAL LOAD CAPACITY.
TYPE PB2 IS FOR USE AS A GUIDE ON HORIZONTAL OR VERTICAL PIPES, OR WHEN
USED WITH THE LEGS VERTICAL AS A VERTICAL RESTRAINT ON HORIZONTAL PIPES IN

C
CASES WHERE THE VERTICAL LOAD CAN ACT UPWARDS.
PB4

A
TYPE PB3 IS FOR USE AS A GUIDE ON HORIZONTAL PIPES. THE STATED LOAD CAPACITY
IS APPLICABLE TO BOTH VERTICAL AND LATERAL LOADINGS ACTING CONCURRENTLY.

C
TYPE PB4 IS A TWO WAY GUIDE WHICH CAN BE USED FOR EITHER HORIZONTAL OR
VERTICAL PIPES.
C C

Order by Part Number, Comlin Type and Comlin Grade e.g. PBI-CM1-150-4/816/FR80
Material: Carbon Steel and Comlin. Also available in Stainless Steel.
Pipe Clamp Bases with other Load Capacities are also available.
* Do not exceed the Maximum Temperature for the Grade of Comlin used.
Load
PART NUMBER FOR PART NUMBER FOR Max Capacity
COMLIN TYPE COMLIN TYPE Pipe O/D A B C D E Lagging (See
816, 916, 818 & 918 817 & 917 . Thickness Weight notes)
For Multi-Leg types, replace PB1 with PB1 PB2 PB3 PB4
PB2, PB3 or PB4 mm in mm mm mm in mm mm mm kgf kgf kgf kgf kgf
PB1-CM1-850-10 PB1-CM2-850-10 863.6 34.000 510 500 650 259/16 1134 685 215 314 519 724 929 13350
PB1-CM1-850-13 PB1-CM2-850-13 863.6 34.000 510 500 670 263/8 1212 770 235 583 935 1288 1640 28125
PB1-CM1-900-6 PB1-CM2-900-6 914.4 36.000 540 600 670 263/8 1128 701 210 175 285 394 504 3650
6
PB1-CM1-900-8 PB1-CM2-900-8 914.4 36.000 540 600 670 263/8 1156 735 210 231 369 507 646 7400
PB1-CM1-900-10 PB1-CM2-900-10 914.4 36.000 540 600 680 263/4 1186 785 220 356 598 840 1082 13350
PB1-CM1-900-13 PB1-CM2-900-13 914.4 36.000 540 600 690 273/16 1294 870 230 655 1065 1474 1884 28125
PB1-CM1-950-6 PB1-CM2-950-6 965.2 38.000 570 600 690 273/16 1182 701 205 185 302 418 535 3650
PB1-CM1-950-8 PB1-CM2-950-8 965.2 38.000 570 600 690 273/16 1206 735 205 244 391 538 685 7400
PB1-CM1-950-10 PB1-CM2-950-10 965.2 38.000 570 600 700 279/16 1236 785 215 377 634 891 1148 13350
PB1-CM1-950-13 PB1-CM2-950-13 965.2 38.000 570 600 720 283/8 1346 870 235 696 1134 1573 2011 28125 7
PB1-CM1-1000-6 PB1-CM2-1000-6 1016 40.000 600 600 720 283/8 1234 701 210 197 321 446 570 3650
PB1-CM1-1000-8 PB1-CM2-1000-8 1016 40.000 600 600 720 283/8 1260 735 210 259 416 573 730 7400
PB1-CM1-1000-10 PB1-CM2-1000-10 1016 40.000 600 600 730 283/4 1312 785 220 432 706 980 1254 13350
PB1-CM1-1000-13 PB1-CM2-1000-13 1016 40.000 600 600 740 291/8 1398 870 230 733 1197 1661 2125 28125

10

11

133