Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Footing Design Calculations

    Uploaded by

    Arnold Verceles
    The document outlines footing design calculations for footing FC3 supporting column C3, including checking the footing for maximum and minimum soil pressure, designing bottom reinforcement for bending along the L and B axes, checking shear capacity, and verifying adequate load transfer from the column to the footing. Key details calculated include reinforcement requirements, shear strengths, punching shear capacity, and load combinations considered.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Footing Design Calculations

    Uploaded by

    Arnold Verceles
    38 views5 pages
    The document outlines footing design calculations for footing FC3 supporting column C3, including checking the footing for maximum and minimum soil pressure, designing bottom reinforcement for bending along the L and B axes, checking shear capacity, and verifying adequate load transfer from the column to the footing. Key details calculated include reinforcement requirements, shear strengths, punching shear capacity, and load combinations considered.

    Original Title

    9

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines footing design calculations for footing FC3 supporting column C3, including checking the footing for maximum and minimum soil pressure, designing bottom reinforcement for bending along the L and B axes, checking shear capacity, and verifying adequate load transfer from the column to the footing. Key details calculated include reinforcement requirements, shear strengths, punching shear capacity, and load combinations considered.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views5 pages

    Footing Design Calculations

    Uploaded by

    Arnold Verceles
    The document outlines footing design calculations for footing FC3 supporting column C3, including checking the footing for maximum and minimum soil pressure, designing bottom reinforcement for bending along the L and B axes, checking shear capacity, and verifying adequate load transfer from the column to the footing. Key details calculated include reinforcement requirements, shear strengths, punching shear capacity, and load combinations considered.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    FOOTING DESIGN CALCULATIONS

    Design Code : ACI 318M - 2011


    Footing No : FC3
    Column No : C3 ( 300mm X 300mm)
    Analysis No : 9

    Concrete Grade : C21


    Steel Grade : Fy230
    Clear Cover : 70 mm
    Dfd : 4m
    Dw : 10 m

    Density of Soil = 18 kN/cum


    Soil Bearing Capacity = 200 kN/sqm
    Permissible SBC Increase for EQ = 0 %
    Permissible SBC Increase for = 0 %
    Wind
    Live Load Reduction = 0 %
    Permissible area of loss of contact = 50 %
    Design cross section by Consider : Average pressure
    overburden pressure

    Footing Type : Pad


    Footing Size (L x B x D) : 1200mm X 1200mm X 300mm

    Effective Self Weight = 10.8 kN

    Offset Along L (Loff) = 450 mm


    Offset Along B (Boff) = 450 mm

    Check For Maximum Soil Pressure:


    Critical Analysis Load = 12
    Combination
    Critical Load Combination = [8] : 0.9 (LOAD 3: DL) +(LOAD 2: EZ)
    Pcomb = 258.12 kN
    P = Pcomb + Effective Self Weight x 0.9
    P = 267.84 kN
    Mx = 0 kNm
    My = 0 kNm
    P/A = 186 kN/sqm
    Mx/Zx = 0 kN/sqm
    My/Zy = 0 kN/sqm
    Maximum Soil Pressure = 186 kN/sqm
    Allowable Soil Pressure = 1x200 kN/sqm
    = 200 kN/sqm
    Check For Minimum Soil Pressure:
    Critical Analysis Load = 19
    Combination
    Critical Load Combination = [15] : 0.6 (LOAD 3: DL) -
    0.71 (LOAD 2: EZ)
    Pcomb = 67.37 kN
    P = Pcomb + Effective Self Weight x 0.6
    P = 73.85 kN
    Mx = 0 kNm
    My = 0 kNm
    P/A = 51.28 kN/sqm
    Mx/Zx = 0 kN/sqm
    My/Zy = 0 kN/sqm
    Minimum Soil Pressure = 51.28 kN/sqm
    > 0

    Design For Bending:


    Bottom Reinforcement Along L:
    Critical Analysis Load = 8
    Combination
    Critical Load Combination = [23] : 1.2 (LOAD 3: DL) +0.5 (LOAD 4: LL) +(LOAD 2:
    EZ)
    Pu = 334.47 kN
    Mux = 0 kNm
    Muy = 0 kNm
    P/A = 232.27 kN/sqm
    Mx/Zx = 0 kN/sqm
    My/Zy = 0 kN/sqm

    Deff = 222 mm
    Beff = 1200 mm
    SPu = 232.27 kN/sqm
    Mu = SPu X B X Loff X Loff / 2
    = 28.22 kNm
    Ast Rqd = 720 sqmm
    Ast (min) = 720 sqmm
    Ast Prv (Distributed Across = 11 - #10 @ 120
    Total Width)
    = 779.68 sqmm
    Bottom Reinforcement Along B:
    Critical Analysis Load = 8
    Combination
    Critical Load Combination = [23] : 1.2 (LOAD 3: DL) +0.5 (LOAD 4: LL) +(LOAD 2:
    EZ)
    Pu = 334.47 kN
    Mux = 0 kNm
    Muy = 0 kNm
    P/A = 232.27 kN/sqm
    Mx/Zx = 0 kN/sqm
    My/Zy = 0 kN/sqm

    Deff = 206 mm
    Leff = 1200 mm
    SPu = 232.27 kN/sqm
    Mu = SPu X L X Boff X Boff / 2
    = 28.22 kNm
    Ast Rqd = 720 sqmm
    Ast (min) = 720 sqmm

    Ast Prv (Distributed Across = 11 - #10 @ 120


    Total Length)
    = 779.68 sqmm
    Design For Shear:
    One Way Shear Along L:
    Critical Section @ d from Column Face
    = 222 mm
    Critical Analysis Load = 8
    Combination
    Critical Load Combination = [23] : 1.2 (LOAD 3: DL) +0.5 (LOAD 4: LL) +(LOAD 2:
    EZ)
    Pu = 334.47 kN
    Mux = 0 kNm
    Muy = 0 kNm
    P/A = 232.27 kN/sqm
    Mx/Zx = 0 kN/sqm
    My/Zy = 0 kN/sqm

    Deff = 222 mm
    Beff = 1200 mm
    SPu = 232.27 kN/sqm
    Vu = SPu X (Loff - d) X B
    = 63.55 kN
    φVc = 165.85 kN
    Vu < φVc
    One Way Shear Along B:
    Critical Section @ d from Column Face

    = 206 mm
    Critical Analysis Load = 8
    Combination
    Critical Load Combination = [23] : 1.2 (LOAD 3: DL)
    +0.5 (LOAD 4: LL) +
    (LOAD 2: EZ)
    Pu = 334.47 kN
    Mux = 0 kNm
    Muy = 0 kNm
    P/A = 232.27 kN/sqm
    Mx/Zx = 0 kN/sqm
    My/Zy = 0 kN/sqm

    Deff = 206 mm
    Leff = 1200 mm
    SPu = 232.27 kN/sqm

    Vu = SPu X (Boff - d) X L
    = 68.01 kN
    φVc = 152.72 kN
    Vu < φVc

    Design For Punching Shear:


    Critical Section @ d/2 from Column Face
    = 107 mm

    Critical Analysis Load = 8


    Combination
    Critical Load Combination = [23] : 1.2 (LOAD 3: DL) +0.5 (LOAD 4: LL) +(LOAD 2:
    EZ)
    Pu = 334.47 kN
    Mux = 0 kNm
    Muy = 0 kNm
    P/A = 232.27 kN/sqm
    Mx/Zx = 0 kN/sqm
    My/Zy = 0 kN/sqm

    Deff = 214 mm
    Leff = 514 mm
    Beff = 514 mm
    Punching Perimeter = 2056 mm
    Punching Area = 439984 sqmm
    SPu
    = 232.27 kN/sqm
    Vu = { SPu [ (L x B)- (Leff x
    Beff)]}
    = 273.11 kN
    φVn = 756.1 kN
    φVc = 499.02 kN
    No Shear Reinforcement
    Vu < φVc
    Required

    Load Transfer Check For Load Transfer From Column To Footing


    Critical Analysis Load = 8
    Combination
    Critical Load Combination = [23] : 1.2 (LOAD 3: DL)
    +0.5 (LOAD 4: LL) +
    (LOAD 2: EZ)
    Pu = 334.47 kN
    A2 = 0.09 sqm
    A1 = 2.25 sqm

    Base Area = 1.44 sqm


    A1 > Base Area
    Thus, A1 = 1.44
    Modification Factor = SquareRoot(A1/A2) < = 2
    SquareRoot(A1/A2) = 4
    Thus, Modification Factor = 2

    Φ1 = 0.65
    Φ1Pnb = Φ1 X 0.85 X Fck X Modification Factor X Column Area
    = 2088.45 kN
    Φ1Pnb > Pu, Hence Safe.

    You might also like