Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Radiator Support (Assy) : Body Panel Replacement BP-8

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

BP-8 BODY PANEL REPLACEMENT

RADIATOR SUPPORT (ASSY)


REPLACEMENT

F20979-C

REMOVAL

F20979

BRM
FORTUNER/
HILUX
BM00M0E
BODY PANEL REPLACEMENT BP-9

INSTALLATION
: Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension
diagram. (See the body dimension diagram)
: Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the
finish.
: After welding, apply the polyurethane foam to the corresponding parts.
: After welding, apply body sealer and under-coating to the corresponding parts.
: After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.

F20980

POINT
1 Inspect the fitting of the headlight and front fender, etc., before welding, since this affects the appearance of the
finish.

BRM
FORTUNER/
HILUX
BM00M0E

You might also like