Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

CFM56 - 5B - Esm - Rev - 05 11 01 200 001 N PGK08 001 N - TSN.77 - U - 20161030

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

CFM56-5B

ENGINE SHOP MANUAL

FAN ROTOR - LIFE LIMITS

TASK 05-11-01-200-001-N

1. General.

This section contains the FAA and EASA approved life limits for the fan
rotor parts installed on the 3D Aero engine models (Effect N) for the
Commercial Aircraft Applications (Service Bulletin 72-0308 not applied).

For limits applicable to the non 3D Aero engine models (Effect M), refer
to 05-11-01-200-001 (05-11-01, Life Limits 001).

Refer to 00-00-00-860-000 (00-00-00, Introduction 000) for information


about the effect codes.

For limits applicable to Corporate Aircraft Applications (Service Bulletin


72-0308 applied), refer to 05-11-21-200-001 (05-11-21, Life Limits 001).

The life of the parts is given in flight cycles. An accurate record of


flight cycles must be kept for each part serial number. The record must
include the total number of cycles that each part has operated, the engine
model, and the Aircraft Application in which the part has been used.
Refer to 05-11-00-200-001 (05-11-00, Life Limits 001). The operator must
make sure that the parts are not operated more than their life limit.
Refer to Figure 801.

If, for any part, the value N/A (Not Applicable) appears under a
particular model, then that part has not been authorized for that model.
Refer to the Illustrated Parts Catalog for a list of approved part numbers
for each engine model.

If, for any part, the value N/L (Not Limited) appears under a particular
model, then that part is not life limited for that model.

2. Aircraft Application.

Engines may be utilized in a Commercial Aircraft Application or a


Corporate Aircraft Application as determined by Service Bulletin 72-0308.
Life limits vary with Aircraft Application. Separate Corporate life limit
sections are provided for operation when Service Bulletin 72-0308 has
been applied and engraved on the engine name plate last row. The life
limit under the category column of the Life Limits table designates the
appropriate life limit, in flight cycles, for the part to be operated in
that category for a specific model.

Each engine cycle must be counted in one of the two Aircraft Application
categories identified. If procedures are not in place, then the lowest
life limit listed must be used for determining the life limit.

EFFECT N

05-11-01
LIFE LIMITS 001
PAGE 801
OCT 30/2016
© CFM PROPRIETARY INFORMATION : Subject to the restrictions on the cover or first page
CFM56-5B
ENGINE SHOP MANUAL

3. Life Limits of Fan Rotor Parts.

Subtask 05-11-01-200-054

A. Life Limits of Fan Rotor Parts. Refer to Figure 801.

Commercial Aircraft Application


CFM56 Engine Models
and Cycles
(Service Bulletin 72-0308 not applied)
-5B1/P -5B2/P
-5B1/2P -5B2/2P -5B1/3
-5B4/P -5B3/P -5B4/3
-5B4/2P -5B3/2P -5B5/3
-5B5/P -5B3/P1 -5B6/3 -5B2/3
Fig. -5B6/P -5B4/P1 -5B8/P -5B7/3 -5B3/3
Ind Part Name and -5B6/2P -5B3/2P1 -5B9/P -5B8/3 -5B3/3B1
No. Number -5B7/P -5B4/2P1 -5B9/2P -5B9/3- -5B4/3B1

1 Fan Disk

338-001-503-0 24,700 20,000 24,700 N/A N/A

338-001-504-0 30,000 30,000 30,000 30,000 30,000

2 Booster Spool

338-001-905-0 30,000 30,000 30,000 30,000 30,000

338-001-906-0 30,000 30,000 30,000 30,000 30,000

3 Fan Shaft

338-010-601-0 30,000 30,000 30,000 30,000 30,000

Commercial Aircraft Application

EFFECT N

05-11-01
LIFE LIMITS 001
PAGE 802
OCT 30/2016
© CFM PROPRIETARY INFORMATION : Subject to the restrictions on the cover or first page
CFM56-5B
ENGINE SHOP MANUAL

The Fan Rotor


Figure 801

EFFECT N

05-11-01
LIFE LIMITS 001
PAGE 803
OCT 30/2016
© CFM PROPRIETARY INFORMATION : Subject to the restrictions on the cover or first page

You might also like