Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    2L2TB / 2.7 M: 2G4WHF-01A

    Uploaded by

    Lu Chen
    This document summarizes the specifications of a 12-port antenna with integrated RET that operates in the frequency ranges of 698-960 MHz and 1695-2690 MHz. The antenna has a gain between 15.6-18.8 dBi, beamwidth of 25-66 degrees, port isolation of 26 dB or higher, and third order PIM better than -150 dBc. It is 2.7 meters tall, weighs 51.5 kg, and can withstand winds up to 241 km/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    2L2TB / 2.7 M: 2G4WHF-01A

    Uploaded by

    Lu Chen
    1K views2 pages
    This document summarizes the specifications of a 12-port antenna with integrated RET that operates in the frequency ranges of 698-960 MHz and 1695-2690 MHz. The antenna has a gain between 15.6-18.8 dBi, beamwidth of 25-66 degrees, port isolation of 26 dB or higher, and third order PIM better than -150 dBc. It is 2.7 meters tall, weighs 51.5 kg, and can withstand winds up to 241 km/h.

    Original Title

    2G4WHF-01A (002)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications of a 12-port antenna with integrated RET that operates in the frequency ranges of 698-960 MHz and 1695-2690 MHz. The antenna has a gain between 15.6-18.8 dBi, beamwidth of 25-66 degrees, port isolation of 26 dB or higher, and third order PIM better than -150 dBc. It is 2.7 meters tall, weighs 51.5 kg, and can withstand winds up to 241 km/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views2 pages

    2L2TB / 2.7 M: 2G4WHF-01A

    Uploaded by

    Lu Chen
    This document summarizes the specifications of a 12-port antenna with integrated RET that operates in the frequency ranges of 698-960 MHz and 1695-2690 MHz. The antenna has a gain between 15.6-18.8 dBi, beamwidth of 25-66 degrees, port isolation of 26 dB or higher, and third order PIM better than -150 dBc. It is 2.7 meters tall, weighs 51.5 kg, and can withstand winds up to 241 km/h.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    12-Port Antenna (preliminary)

    2 x (698-960) + 4 x (1695-2690) (twin beam) MHz


    2G4WHF-01A Integrated RET (AISG 2.0 Compliant)
    2L2TB / 2.7 m 4.3-10 Connectors

    Electrical Data (BASTA)

    2 x (698-960) 4 x (1695-2690) (twin beam)


    Frequency(MHz)
    698-806 790-898 880-960 1695-1920 1920-2180 2300-2500 2500-2690
    R1 & R2 dBi 15.6±0.6 16.1±0.5 16.2±0.6
    Gain Y1 & Y3 17.8±0.6 18.8±0.5 18.5±0.6 18.8±0.5
    Y2 & Y4 17.5±0.6 18.5±0.5 18.2±0.6 18.5±0.5
    Polarization ° ±45
    Horizontal Pattern
    3dB Beamwidth ° 66±6 58±6 58±6 33±3 31±3 30±3 25±3
    F/B Ratio
    Co-polar (180°±30°) 25 25 25 30 30 30 30
    dB
    Cross-Polar Boresight 0° 20 20 20 20 20 18 17
    Ratio Sector ±60 ° 10 9 9 / / / /
    Vertical Pattern
    3dB Beamwidth 8.6±0.9 7.6±0.7 7.0±0.5 7.4±0.8 6.6±0.8 5.7±0.7 5.3±0.7
    °
    Electrical Downtilt 2-12 2-10
    1st Upper sidelobe
    dB 17 17 17 17 17 17 16
    Suppression
    RF Parameters
    VSWR 1.5:1
    Port Isolation 26 26
    dB
    Band Isolation R1, R2//Y1, Y2, Y3, Y4>30
    Beam Isolation / 16
    3rd Order PIM dBc -150 @ 2 x 43 dBm
    Impedance Ω 50
    Power Handing W 500 200

    Mechanical Data (BASTA)

    Input Connectors 12 x 4.3-10 Female


    Connector Position Bottom
    Lighting Protection DC Ground
    Radome Material Fiberglass
    Antenna Weight 51.5 kg 113.5 lb
    Antenna Dimensions (H x W x D) 2690 x 498 x 197 mm 105.9 x 19.6 x 7.8 in
    Maximum Wind Velocity 241 km/h 150 mph
    Max. Wind Load @150 km/h (Front/Rear/Side) 1115 / 1419 / 321 N 251 / 319 / 72 lbf
    Mast Diameter Supported 50 - 110 mm 2.0 - 4.3 in
    Relative Humidity 5% - 95%
    Operating Temperature Range -40 ~ +70 °C -40 ~ +158 °F

    Rosenberger Hochfrequenztechnik GmbH & Co. KG Rosenberger Asia Pacific Co., Ltd. V 0.2
    www.rosenberger.com www.rosenbergerap.com 11/28/2019
    1/2
    12-Port Antenna (preliminary)
    2 x (698-960) + 4 x (1695-2690) (twin beam) MHz
    2G4WHF-01A Integrated RET (AISG 2.0 Compliant)
    2L2TB / 2.7 m 4.3-10 Connectors

    Layout

    3 R2
    Array Connector Frequency (MHz) Sub Unit # RET Type ICU Serial*
    R1 1–2 698-960 2 MRET RB.....XXYYxxxxx-MM
    R2 3–4 698-960 5 MRET RB.....XXYYxxxxx-MM
    Y1 5–6 1695-2690 1 MRET RB.....XXYYxxxxx-MM
    Y2 7–8 1695-2690 3 MRET RB.....XXYYxxxxx-MM
    Y3 9 – 10 1695-2690 6 MRET RB.....XXYYxxxxx-MM
    Y4 11 – 12 1695-2690 4 MRET RB.....XXYYxxxxx-MM
    *Remark: XX – Year, YY – Week , xxxxx – Serial Number

    Pattern

    698-960 1695-2690 (TwinBeam)

    Accessories
    Item Model Weight (kg) Mechanical Tilt Range (°)
    Mounting Kit 185-1 11.0 0-10

    Compliance
    — Our quality assurance system and our environmental management system apply to the entire company
    and are certified according to EN ISO 9001, EN ISO 14001 and OHSAS 18001
    — Our products are compliant to the EU Directive RoHS as well as to other environmentally relevant
    regulations (e.g. REACH)

    While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe
    existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. For environmental information, please refer to www.rosenbergerap.com/content/Environment.aspx

    Rosenberger Hochfrequenztechnik GmbH & Co. KG Rosenberger Asia Pacific Co., Ltd. V 0.2
    www.rosenberger.com www.rosenbergerap.com 11/28/2019
    2/2

    You might also like